This added debug fission support.
It tries to find the dwp file from the debug dir /usr/lib/debug/*/debug
and read symbols from them.
Most of this patch comes from
https://critique.corp.google.com/#review/52048295
and some fixes after that.
The elf_reader.cc comes from TOT google code. I just
removed some google dependency.
Current problems from this patch
1: Some type mismatch: from uint8_t * to char *.
2: Some hack to find the .dwp file. (replace .debug with .dwp)
BUG=chromium:604440
R=dehao@google.com, ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1884283002 .
Doing a `make -jN check` from a fresh build breaks (and has probably been
broken for a while). linux_client_unittest_shlib is missing $(TEST_LIBS)
from its _DEPENDENCIES. The automake manual says if _DEPENDENCIES are not
specified they'll be computed from _LDADD, but we are specifying it and just
leaving out $(TEST_LIBS).
R=vapier@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1870733005 .
This preserves full build ids in minidumps, which are useful for
tracking down the right version of system libraries from Linux
distributions.
The default build id produced by GNU binutils' ld is a 160-bit SHA-1
hash of some parts of the binary, which is exactly 20 bytes:
https://sourceware.org/binutils/docs-2.26/ld/Options.html#index-g_t_002d_002dbuild_002did-292
The bulk of the changes here are to change the signatures of the
FileID methods to use a wasteful_vector instead of raw pointers, since
build ids can be of arbitrary length.
The previous change that added support for this in the processor code
preserved the return value of `Minidump::debug_identifier()` as the
current `GUID+age` treatment for backwards-compatibility, and exposed
the full build id from `Minidump::code_identifier()`, which was
previously stubbed out for Linux dumps. This change keeps the debug ID
in the `dump_syms` output the same to match.
R=mark@chromium.org, thestig@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1688743002 .
Linux make check is failing for mips, mips64, arm, arm64
with error:
"fatal error: mach/arm/vm_types.h: No such file or directory" in case of arm,
"../src/third_party/mac_headers/mach/machine/vm_types.h:37:2: error: #error architecture not supported" in case of mips/mips64
This was partially fixed in https://codereview.chromium.org/1645673002/.
Here excluding src/common/mac/macho_reader_unittest for hosts other than x86/x86-64.
BUG=make check failure for linux mips
TEST=make check pass
Review URL: https://codereview.chromium.org/1692933002 .
The dump_syms_mac tool only works for the system it is being built for
(it doesn't support running on ELFs for a diff target), and it builds
only for x86 currently.
If you look at the mac header:
src/third_party/mac_headers/mach/machine/vm_types.h
it will #error for non x86/arm systems, and the arm header is not in
our source tree.
Tweak the build so it's only compiled when targetting x86 systems.
BUG=chromium:579384
TEST=`make check` pass
R=ted.mielczarek@gmail.com
Review URL: https://codereview.chromium.org/1645673002 .
Some systems provide prebuilt copies of gmock/gtest (such as Chromium
OS). Add a configure flag so they can take advantage of that. This
allows for a smaller checkout as they don't need to include the full
testing/ tree.
BUG=chromium:579384
TEST=`make check` passes w/--enable-system-test-libs
TEST=`make check` passes w/--disable-system-test-libs
R=thestig@chromium.org
Review URL: https://codereview.chromium.org/1638653002 .
When building with -gsplit-dwarf, the generated dwo files are left behind
even when you `make clean`. Fix that up.
BUG=chromium:579384
TEST=`./configure CXXFLAGS='-O -gsplit-dwarf' && make && make clean` removes dwo files now
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1633893002 .
The current makefile ends up building ~17 copies of the gtest/gmock
objects -- every test that refers to the cc files directly will have
its own copy. This is because the build doesn't know if CFLAGS and
such have changed between each target (and in some cases, they are).
Create a new libtesting.a target to hold a single copy of these files
and update all of the unittests to link that in. This speeds up the
build a bit especially when you aren't using ccache.
This does mean we can no longer build gtest/gmock with unique flags,
but we haven't wanted that so far, so clearly no one wants that.
BUG=chromium:579384
TEST=`make check` passes
R=thestig@chromium.org
Review URL: https://codereview.chromium.org/1633903002 .
The EXTRA_PROGRAMS knob does not automatically trigger clean up of
targets listed in it. Use CLEANFILES so we make sure `make clean`
will delete the linux_client_unittest_shlib lib.
BUG=chromium:579384
TEST=`make check` passes
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1618593002 .
This CL exports LinuxCoreDumper and ElfCoreDump in the client library. The ARC collector, which is an alternative to core2md optimized for large core dumps, needs these symbols for core dump parsing and conversion to minidump.
BUG=http://b/25773929
TEST=nm src/client/linux/libbreakpad_client.a | grep LinuxCoreDumper
Review URL: https://codereview.chromium.org/1576053002 .
libbreakpad.a pointlessly contains libdisasm.a
This looks like a left-over from when libtool was used
Since this has no useful effect (as the linker doesn't recursively search
archive members which aren't objects), anything which requires the objects in
libdisasm.a must already be linking with it, so simply remove it.
BUG=https://code.google.com/p/google-breakpad/issues/detail?id=484
Review URL: https://codereview.chromium.org/1399003002 .
Automake did not install headers under c/l/dwc, which caused
compile errors when building against an installed breakpad, since
other headers (e.g. client/linux/handler/exception_handler.h)
depended on it. This commit adds these headers to the list of
automake installed files.
R=vapier@chromium.org
Review URL: https://codereview.chromium.org/1127393006 .
We're working on building our Firefox Mac builds as a Linux cross-compile
(https://bugzilla.mozilla.org/show_bug.cgi?id=921040) and we need symbol
dumping to work. This change ports the Mac dump_syms tool to build and work
on Linux. I've tested it and it produces identical output to running the
tool on Mac.
The bulk of the work here was converting src/common/mac/dump_syms.mm and
src/tools/mac/dump_syms/dump_syms_tool.mm from ObjC++ to C++ and removing
their use of Foundation classes in favor of standard C/C++.
This won't compile out-of-the-box on Linux, it requires some Mac system
headers that are not included in this patch. I have those tentatively in
a separate patch to land in Gecko
(http://hg.mozilla.org/users/tmielczarek_mozilla.com/mc/rev/5fb8da23c83c),
but I wasn't sure if you'd be interested in having them in the Breakpad tree.
We could almost certainly pare down the set of headers included there, I
didn't spend too much time trying to minimize them (we primarily just need
the Mach-O structs and a few associated bits).
I just realized that this patch is missing updating the XCode project files
(ugh). I'll fix that up in a bit.
R=mark@chromium.org
BUG=https://bugzilla.mozilla.org/show_bug.cgi?id=543111
Review URL: https://codereview.chromium.org/1340543002 .
The PopSeccompStackFrame was introduced to deal with stack frames
originated in the legacy seccomp sandbox. The only user of that
sandbox was Google Chrome, but the legacy sandbox has been
deprecated in 2013 (crrev.com/1290643003) in favor of the new
bpf sandbox.
Removing this dead code as it has some small bound checking bug
which causes occasional crashes in WebView (which are totally
unrelated to the sandbox).
Note: this will require a corresponding change in the chromium
GYP/GN build files to roll.
BUG=665,chromium:477444
R=jln@chromium.org, mark@chromium.org, torne@chromium.org
Review URL: https://codereview.chromium.org/1299593003 .
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1492 4c0a9323-5329-0410-9bdc-e9ce6186880e
when checking exploitability rating.
Linux minidumps do not support MD_MEMORY_INFO_LIST_STREAM, meaning the
processor cannot retrieve its memory mappings. However, it has its own
stream, MD_LINUX_MAPS, which contains memory mappings specific to Linux
(it contains the contents of /proc/self/maps). This CL allows the minidump
to gather information from the memory mappings for Linux minidumps.
In addition, exploitability rating for Linux dumps now use memory mappings
instead of checking the ELF headers of binaries. The basis for the change
is that checking the ELF headers requires the minidumps to store the memory
from the ELF headers, while the memory mapping data is already present,
meaning the size of a minidump will be unchanged.
As a result, of removing ELF header analysis, two unit tests have been removed.
Arguably, the cases that those unit tests check do not merit a high
exploitability rating and do not warrant a solid conclusion that was given
earlier.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1251593007
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1476 4c0a9323-5329-0410-9bdc-e9ce6186880e
ACCESS_VIOLATION and IN_PAGE_ERROR both specify
read/write/dep flags and address. ACCESS_VIOLATION currently
reports these, but IN_PAGE_ERROR does not. This change makes
IN_PAGE_ERROR report this information as well, and also the
additional NTSTATUS value for the underlying cause.
Patch by bungeman@chromium.org
Review URL: https://breakpad.appspot.com/1794002/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1441 4c0a9323-5329-0410-9bdc-e9ce6186880e
This introduces the microdump_stackwalk binary which takes advantage
of the MicrodumpProcessor to symbolize microdumps.
Its operation is identical to the one of minidump_stackwalk.
This CL, in fact, is also refactoring most of the common bits into
stackwalk_common.
BUG=chromium:410294
R=mmandlis@chromium.org
Review URL: https://breakpad.appspot.com/4704002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1405 4c0a9323-5329-0410-9bdc-e9ce6186880e
Microdumps are a very lightweight variant of minidumps. They are meant
to dump a minimal crash report on the system log (logcat on Android),
containing only the state of the crashing thread.
This is to deal with cases where the user has opted out from crash
uploading but we still want to generate meaningful information on the
device to pull a stacktrace for development purposes.
Conversely to conventional stack traces (e.g. the one generated by
Android's debuggerd or Chromium's base::stacktrace) microdumps do NOT
require unwind tables to be present in the target binary. This allows
to save precious binary size (~1.5 MB for Chrome on Arm, ~10 MB on
arm64).
More information and design doc on crbug.com/410294
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1398 4c0a9323-5329-0410-9bdc-e9ce6186880e
This change is a pure refactoring of the common bits of minidump_writer.cc
that will be shared soon with the upcoming microdump_writer.cc.
In particular, this CL is extracting the following classes:
- ThreadInfo: handles the state of the threads in the crashing process.
- RawContextCPU: typedef for arch-specific CPU context structure.
- UContextReader: Fills out a dump RawContextCPU structure from the
ucontext struct provided by the kernel (arch-dependent).
- SeccompUnwinder: cleans out the stack frames of the Seccomp sandbox
on the supported architectures.
- MappingInfo: handles information about mappings
BUG=chromium:410294
R=mmandlis@chromium.org
Review URL: https://breakpad.appspot.com/4684002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1388 4c0a9323-5329-0410-9bdc-e9ce6186880e
Adds the interfaces for MicrodumpProcessor (very similar to
MinidumpProcessor) and corresponding unittest stubs.
These stubs are required for multi-side integration and to start
rolling the updated processor library into the dependent projects.
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1372 4c0a9323-5329-0410-9bdc-e9ce6186880e
- src/common/android/testing/mkdtemp.h:
Fixes a compilation error when using the (recent) NDK r9b,
see comments in the source file for details.
- android/test-driver, Makefile.am, Makefile.in:
Autotools 1.12 changed the way tests are run during "make check"
so add a new "custom test driver" to run tests on Android, and
modify Makefile.am / Makefile.in accordingly. Otherwise,
'make check' tried to run the tests on the host.
- android/test-shell.sh:
Allow several tests to run in parallel on the device, by
creating a custom test directory for each test process.
This allows running "make check -j8" reliably.
- src/common/linux/file_id_unittest.cc:
Disable the SelfStrip test on Android, since it assumes a 'strip'
executable is available on the target system where the test runs.
BUG=NONE
R=mark@chromium.org, ted.mielczarek@gmail.com
TEST=android/run-checks.sh --ndk-dir=/path/to/android-ndk-r9b
Review URL: https://breakpad.appspot.com/904003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1259 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch fixes the build for Android on MIPS when
using the latest official Android NDK (r9):
- Update src/common/android/include/elf.h to add a missing
definition for SHT_MIPS_DWARF.
- Add src/common/android/include/sgidefs.h required by LSS
when compiling for MIPS.
- Update android/run-checks.sh to work properly with
the --abi=mips option. All tests were passed succesfully
with an emulator system image running Android 4.2.
- Update other Android-specific files.
R=Petar.Jovanovic@imgtec.com, mark@chromium.org
Review URL: https://breakpad.appspot.com/633002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1216 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch improves several things for Linux/ARM:
- Better detection of the number of CPUs on the target
device. The content of /proc/cpuinfo only matches the
number of "online" CPUs, which varies over time with
recent Android devices.
- Reconstruct the CPUID and ELF hwcaps values from
/proc/cpuinfo, this is useful to better identify
target devices in minidumps.
- Make minidump_dump display the new information
in useful ways.
- Write a small helper class to parse /proc/cpuinfo
and also use it for x86/64.
- Write a small helper class to parse sysfds cpu lists.
- Add a my_memchr() implementation.
- Add unit tests.
Tested on a Nexus S (1 CPU), Galaxy Nexus (2 CPUs)
and a Nexus 4 (4 CPUs).
Review URL: https://breakpad.appspot.com/540003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1160 4c0a9323-5329-0410-9bdc-e9ce6186880e
- One of the unit test binaries refused to link due to
missing linker flags.
- The WriteDSODebug() function now works on Android, so
do not special-case it anymore.
- Ensure android/run-checks.sh will complain properly if
the client unit test suite fails on Android. It used to
consider that such failures were acceptable. Note that
it still considers failures when running the tools and
processor test suite on the device normal (fixing this
is a lot harder, and these parts of Breakpad typically
never run on a device, but on the host).
Review URL: https://breakpad.appspot.com/482002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1066 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds a minimalistic implementation of getcontext()
for Android/ARM and Android/x86. The provided code is
in assembly and only implements the bare minimum required
by Breakpad to get the current processor state.
Note that:
- The FPU state is not saved to the ucontext_t on ARM.
(that's actually the main difference with a normal
getcontext() implementation).
This is normal. On Linux/ARM, such state must be
obtained with PTRACE_GETVFPREGS instead. This will
be implemented in a future patch.
- On x86, only the 'regular' FPU state is saved, to
mimic the GLibc/i386 implementation. The state of
SSE/SSE2/etc registers is not part of the upstream
getcontext() implementation.
Review URL: https://breakpad.appspot.com/444002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1024 4c0a9323-5329-0410-9bdc-e9ce6186880e
