2015-08-19 20:33:27 +02:00
# mbed TLS Benchmark Example
2015-07-28 14:17:48 +02:00
This application benchmarks the various cryptographic primitives offered by mbed TLS.
## Pre-requisites
2015-08-27 16:44:11 +02:00
To build and run this example you must have:
2015-07-28 14:17:48 +02:00
* A computer with the following software installed:
* [CMake ](http://www.cmake.org/download/ ).
* [yotta ](https://github.com/ARMmbed/yotta ). Please note that **yotta has its own set of dependencies** , listed in the [installation instructions ](http://armmbed.github.io/yotta/#installing-on-windows ).
* [Python ](https://www.python.org/downloads/ ).
2015-08-27 16:44:11 +02:00
* [The ARM GCC toolchain ](https://launchpad.net/gcc-arm-embedded ).
* A serial terminal emulator (Like screen, pySerial and cu).
2015-08-19 20:33:27 +02:00
* An [FRDM-K64F ](http://developer.mbed.org/platforms/FRDM-K64F/ ) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
2015-07-28 14:17:48 +02:00
* A micro-USB cable.
* If your OS is Windows, please follow the installation instructions [for the serial port driver ](https://developer.mbed.org/handbook/Windows-serial-configuration ).
## Getting started
2015-08-19 20:33:27 +02:00
1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board.
2015-07-28 14:17:48 +02:00
2. Navigate to the mbedtls directory supplied with your release and open a terminal.
3. Set the yotta target:
```
yotta target frdm-k64f-gcc
```
2015-08-19 21:29:31 +02:00
4. Build mbedtls and the examples. This may take a long time if this is your first compilation:
2015-07-28 14:17:48 +02:00
```
2015-08-19 20:33:27 +02:00
$ yotta build
2015-07-28 14:17:48 +02:00
```
2015-08-18 19:52:57 +02:00
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-benchmark.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
2015-07-28 14:17:48 +02:00
2015-08-27 16:44:11 +02:00
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.
2015-07-28 14:17:48 +02:00
2018-06-22 12:22:44 +02:00
Use the following settings:
2015-08-27 16:44:11 +02:00
2018-06-22 12:22:44 +02:00
* 115200 baud (not 9600).
* 8N1.
* No flow control.
2015-08-27 16:44:11 +02:00
7. Press the Reset button on the board.
2015-07-28 14:17:48 +02:00
2015-08-18 19:52:57 +02:00
8. The output in the terminal window should look like:
2015-07-28 14:17:48 +02:00
```
{{timeout;150}}
{{host_test_name;default}}
{{description;mbed TLS benchmark program}}
{{test_id;MBEDTLS_BENCHMARK}}
{{start}}
SHA-1 : 3644 Kb/s, 32 cycles/byte
SHA-256 : 1957 Kb/s, 59 cycles/byte
SHA-512 : 587 Kb/s, 200 cycles/byte
AES-CBC-128 : 1359 Kb/s, 86 cycles/byte
AES-CBC-192 : 1183 Kb/s, 99 cycles/byte
AES-CBC-256 : 1048 Kb/s, 111 cycles/byte
AES-GCM-128 : 421 Kb/s, 279 cycles/byte
AES-GCM-192 : 403 Kb/s, 292 cycles/byte
AES-GCM-256 : 385 Kb/s, 305 cycles/byte
AES-CCM-128 : 542 Kb/s, 216 cycles/byte
AES-CCM-192 : 484 Kb/s, 242 cycles/byte
AES-CCM-256 : 437 Kb/s, 268 cycles/byte
CTR_DRBG (NOPR) : 1002 Kb/s, 117 cycles/byte
CTR_DRBG (PR) : 705 Kb/s, 166 cycles/byte
HMAC_DRBG SHA-1 (NOPR) : 228 Kb/s, 517 cycles/byte
HMAC_DRBG SHA-1 (PR) : 210 Kb/s, 561 cycles/byte
HMAC_DRBG SHA-256 (NOPR) : 212 Kb/s, 557 cycles/byte
HMAC_DRBG SHA-256 (PR) : 185 Kb/s, 637 cycles/byte
RSA-2048 : 41 ms/ public
RSA-2048 : 1349 ms/private
RSA-4096 : 134 ms/ public
RSA-4096 : 7149 ms/private
ECDSA-secp384r1 : 640 ms/sign
ECDSA-secp256r1 : 387 ms/sign
ECDSA-secp384r1 : 1233 ms/verify
ECDSA-secp256r1 : 751 ms/verify
ECDHE-secp384r1 : 1191 ms/handshake
ECDHE-secp256r1 : 730 ms/handshake
ECDHE-Curve25519 : 611 ms/handshake
ECDH-secp384r1 : 584 ms/handshake
ECDH-secp256r1 : 365 ms/handshake
ECDH-Curve25519 : 303 ms/handshake
{{success}}
{{end}}
```