mbedtls/library/psa_crypto_storage.h

/**
 * \file psa_crypto_storage.h
 *
 * \brief PSA cryptography module: Mbed TLS key storage
 */
/*
 *  Copyright (C) 2018, ARM Limited, All Rights Reserved
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *  This file is part of mbed TLS (https://tls.mbed.org)
 */

#ifndef PSA_CRYPTO_STORAGE_H
#define PSA_CRYPTO_STORAGE_H

#ifdef __cplusplus
extern "C" {
#endif

/* Include the Mbed TLS configuration file, the way Mbed TLS does it
 * in each of its header files. */
#if defined(MBEDTLS_CONFIG_FILE)
#include MBEDTLS_CONFIG_FILE
#else
#include "mbedtls/config.h"
#endif

#include "psa/crypto.h"
#include <stdint.h>

/* Limit the maximum key size to 30kB (just in case someone tries to
 * inadvertently store an obscene amount of data) */
#define PSA_CRYPTO_MAX_STORAGE_SIZE ( 30 * 1024 )

/** The maximum permitted persistent slot number.
 *
 * In Mbed Crypto 0.1.0b:
 * - Using the file backend, all key ids are ok except 0.
 * - Using the ITS backend, all key ids are ok except 0xFFFFFF52
 *   (#PSA_CRYPTO_ITS_RANDOM_SEED_UID) for which the file contains the
 *   device's random seed (if this feature is enabled).
 * - Only key ids from 1 to #PSA_KEY_SLOT_COUNT are actually used.
 *
 * Since we need to preserve the random seed, avoid using that key slot.
 * Reserve a whole range of key slots just in case something else comes up.
 *
 * This limitation will probably become moot when we implement client
 * separation for key storage.
 */
#define PSA_MAX_PERSISTENT_KEY_IDENTIFIER PSA_KEY_ID_VENDOR_MAX

/**
 * \brief Checks if persistent data is stored for the given key slot number
 *
 * This function checks if any key data or metadata exists for the key slot in
 * the persistent storage.
 *
 * \param key           Persistent identifier to check.
 *
 * \retval 0
 *         No persistent data present for slot number
 * \retval 1
 *         Persistent data present for slot number
 */
int psa_is_key_present_in_storage( const psa_key_file_id_t key );

/**
 * \brief Format key data and metadata and save to a location for given key
 *        slot.
 *
 * This function formats the key data and metadata and saves it to a
 * persistent storage backend. The storage location corresponding to the
 * key slot must be empty, otherwise this function will fail. This function
 * should be called after psa_import_key_into_slot() to ensure the
 * persistent key is not saved into a storage location corresponding to an
 * already occupied non-persistent key, as well as validating the key data.
 *
 *
 * \param key           Persistent identifier of the key to be stored. This
 *                      should be an unoccupied storage location.
 * \param type          Key type (a \c PSA_KEY_TYPE_XXX value).
 * \param[in] policy    The key policy to save.
 * \param[in] data      Buffer containing the key data.
 * \param data_length   The number of bytes that make up the key data.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_INSUFFICIENT_STORAGE
 * \retval PSA_ERROR_STORAGE_FAILURE
 * \retval PSA_ERROR_ALREADY_EXISTS
 */
psa_status_t psa_save_persistent_key( const psa_key_file_id_t key,
                                      const psa_key_type_t type,
                                      const psa_key_policy_t *policy,
                                      const uint8_t *data,
                                      const size_t data_length );

/**
 * \brief Parses key data and metadata and load persistent key for given
 * key slot number.
 *
 * This function reads from a storage backend, parses the key data and
 * metadata and writes them to the appropriate output parameters.
 *
 * Note: This function allocates a buffer and returns a pointer to it through
 * the data parameter. psa_free_persistent_key_data() must be called after
 * this function to zeroize and free this buffer, regardless of whether this
 * function succeeds or fails.
 *
 * \param key               Persistent identifier of the key to be loaded. This
 *                          should be an occupied storage location.
 * \param[out] type         On success, the key type (a \c PSA_KEY_TYPE_XXX
 *                          value).
 * \param[out] policy       On success, the key's policy.
 * \param[out] data         Pointer to an allocated key data buffer on return.
 * \param[out] data_length  The number of bytes that make up the key data.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_STORAGE_FAILURE
 * \retval PSA_ERROR_DOES_NOT_EXIST
 */
psa_status_t psa_load_persistent_key( psa_key_file_id_t key,
                                      psa_key_type_t *type,
                                      psa_key_policy_t *policy,
                                      uint8_t **data,
                                      size_t *data_length );

/**
 * \brief Remove persistent data for the given key slot number.
 *
 * \param key           Persistent identifier of the key to remove
 *                      from persistent storage.
 *
 * \retval PSA_SUCCESS
 *         The key was successfully removed,
 *         or the key did not exist.
 * \retval PSA_ERROR_STORAGE_FAILURE
 */
psa_status_t psa_destroy_persistent_key( const psa_key_file_id_t key );

/**
 * \brief Free the temporary buffer allocated by psa_load_persistent_key().
 *
 * This function must be called at some point after psa_load_persistent_key()
 * to zeroize and free the memory allocated to the buffer in that function.
 *
 * \param key_data        Buffer for the key data.
 * \param key_data_length Size of the key data buffer.
 *
 */
void psa_free_persistent_key_data( uint8_t *key_data, size_t key_data_length );

/**
 * \brief Formats key data and metadata for persistent storage
 *
 * \param[in] data          Buffer for the key data.
 * \param data_length       Length of the key data buffer.
 * \param type              Key type (a \c PSA_KEY_TYPE_XXX value).
 * \param policy            The key policy.
 * \param[out] storage_data Output buffer for the formatted data.
 *
 */
void psa_format_key_data_for_storage( const uint8_t *data,
                                      const size_t data_length,
                                      const psa_key_type_t type,
                                      const psa_key_policy_t *policy,
                                      uint8_t *storage_data );

/**
 * \brief Parses persistent storage data into key data and metadata
 *
 * \param[in] storage_data     Buffer for the storage data.
 * \param storage_data_length  Length of the storage data buffer
 * \param[out] key_data        On output, pointer to a newly allocated buffer
 *                             containing the key data. This must be freed
 *                             using psa_free_persistent_key_data()
 * \param[out] key_data_length Length of the key data buffer
 * \param[out] type            Key type (a \c PSA_KEY_TYPE_XXX value).
 * \param[out] policy          The key policy.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_INSUFFICIENT_STORAGE
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_STORAGE_FAILURE
 */
psa_status_t psa_parse_key_data_from_storage( const uint8_t *storage_data,
                                              size_t storage_data_length,
                                              uint8_t **key_data,
                                              size_t *key_data_length,
                                              psa_key_type_t *type,
                                              psa_key_policy_t *policy );

#if defined(MBEDTLS_PSA_INJECT_ENTROPY)
/** Backend side of mbedtls_psa_inject_entropy().
 *
 * This function stores the supplied data into the entropy seed file.
 *
 * \retval #PSA_SUCCESS
 *         Success
 * \retval #PSA_ERROR_STORAGE_FAILURE
 * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
 * \retval #PSA_ERROR_NOT_PERMITTED
 *         The entropy seed file already exists.
 */
psa_status_t mbedtls_psa_storage_inject_entropy( const unsigned char *seed,
                                                 size_t seed_size );
#endif /* MBEDTLS_PSA_INJECT_ENTROPY */

#ifdef __cplusplus
}
#endif

#endif /* PSA_CRYPTO_STORAGE_H */