POLARSSL_CONFIG_OPTIONS has been removed. Values are set individually

For the Platform module this requires the introduction of POLARSSL_PLATFORM_NO_STD_FUNCTIONS to allow not performing the default assignments.
2024-11-25 17:55:42 +01:00 · 2014-04-25 11:11:10 +02:00 · 2014-04-25 11:11:10 +02:00 · 088c5c5f18
commit 088c5c5f18
parent 1f69a93ab1
10 changed files with 196 additions and 73 deletions
--- a/4
+++ b/4
@ -1,6 +1,10 @@
 PolarSSL ChangeLog (Sorted per branch, date)

 = PolarSSL 1.3 branch
+Changes
+   * POLARSSL_CONFIG_OPTIONS has been removed. All values are individually
+     checked and filled in the relevant module headers
+
 Bugfix
   * Only iterate over actual certificates in ssl_write_certificate_request()
     (found by Matthew Page)
--- a/include/polarssl/config.h
+++ b/include/polarssl/config.h
@ -132,6 +132,24 @@
 */
 //#define POLARSSL_PLATFORM_MEMORY

+/**
+ * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS
+ *
+ * Do not assign standard functions in the platform layer (e.g. malloc() to
+ * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF)
+ *
+ * This makes sure there are no linking errors on platforms that do not support
+ * these functions. You will HAVE to provide alternatives, either at runtime
+ * via the platform_set_xxx() functions or at compile time by setting
+ * the POLARSSL_PLATFORM_STD_XXX defines.
+ *
+ * Requires: POLARSSL_PLATFORM_C
+ *
+ * Uncomment to prevent default assignment of standard functions in the
+ * platform layer.
+ */
+//#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS
+
 /**
 * \def POLARSSL_PLATFORM_XXX_ALT
 *
@ -2026,75 +2044,58 @@
 * This section allows for the setting of module specific sizes and
 * configuration options. The default values are already present in the
 * relevant header files and should suffice for the regular use cases.
- * Our advice is to enable POLARSSL_CONFIG_OPTIONS and change values here
- * only if you have a good reason and know the consequences.
 *
- * If POLARSSL_CONFIG_OPTIONS is undefined here the options in the module
- * header file take precedence.
+ * Our advice is to enable options and change their values here
+ * only if you have a good reason and know the consequences.
 *
 * Please check the respective header file for documentation on these
 * parameters (to prevent duplicate documentation).
- *
- * Uncomment POLARSSL_CONFIG_OPTIONS to enable using the values defined here.
 * \{
 */
-//#define POLARSSL_CONFIG_OPTIONS   /**< Enable config.h module value configuration */

-#if defined(POLARSSL_CONFIG_OPTIONS)
+/* MPI / BIGNUM options */
+//#define POLARSSL_MPI_WINDOW_SIZE            6 /**< Maximum windows size used. */
+//#define POLARSSL_MPI_MAX_SIZE             512 /**< Maximum number of bytes for usable MPIs. */

-// MPI / BIGNUM options
-//
-#define POLARSSL_MPI_WINDOW_SIZE            6 /**< Maximum windows size used. */
-#define POLARSSL_MPI_MAX_SIZE             512 /**< Maximum number of bytes for usable MPIs. */
+/* CTR_DRBG options */
+//#define CTR_DRBG_ENTROPY_LEN               48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
+//#define CTR_DRBG_RESEED_INTERVAL        10000 /**< Interval before reseed is performed by default */
+//#define CTR_DRBG_MAX_INPUT                256 /**< Maximum number of additional input bytes */
+//#define CTR_DRBG_MAX_REQUEST             1024 /**< Maximum number of requested bytes per call */
+//#define CTR_DRBG_MAX_SEED_INPUT           384 /**< Maximum size of (re)seed buffer */

-// CTR_DRBG options
-//
-#define CTR_DRBG_ENTROPY_LEN               48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
-#define CTR_DRBG_RESEED_INTERVAL        10000 /**< Interval before reseed is performed by default */
-#define CTR_DRBG_MAX_INPUT                256 /**< Maximum number of additional input bytes */
-#define CTR_DRBG_MAX_REQUEST             1024 /**< Maximum number of requested bytes per call */
-#define CTR_DRBG_MAX_SEED_INPUT           384 /**< Maximum size of (re)seed buffer */
+/* HMAC_DRBG options */
+//#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL   10000 /**< Interval before reseed is performed by default */
+//#define POLARSSL_HMAC_DRBG_MAX_INPUT           256 /**< Maximum number of additional input bytes */
+//#define POLARSSL_HMAC_DRBG_MAX_REQUEST        1024 /**< Maximum number of requested bytes per call */
+//#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT      384 /**< Maximum size of (re)seed buffer */

-// HMAC_DRBG options
-//
-#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL   10000 /**< Interval before reseed is performed by default */
-#define POLARSSL_HMAC_DRBG_MAX_INPUT           256 /**< Maximum number of additional input bytes */
-#define POLARSSL_HMAC_DRBG_MAX_REQUEST        1024 /**< Maximum number of requested bytes per call */
-#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT      384 /**< Maximum size of (re)seed buffer */
+/* ECP options */
+//#define POLARSSL_ECP_MAX_BITS             521 /**< Maximum bit size of groups */
+//#define POLARSSL_ECP_WINDOW_SIZE            6 /**< Maximum window size used */
+//#define POLARSSL_ECP_FIXED_POINT_OPTIM      1 /**< Enable fixed-point speed-up */

-// ECP options
-//
-#define POLARSSL_ECP_MAX_BITS             521 /**< Maximum bit size of groups */
-#define POLARSSL_ECP_WINDOW_SIZE            6 /**< Maximum window size used */
-#define POLARSSL_ECP_FIXED_POINT_OPTIM      1 /**< Enable fixed-point speed-up */
+/* Entropy options */
+//#define ENTROPY_MAX_SOURCES                20 /**< Maximum number of sources supported */
+//#define ENTROPY_MAX_GATHER                128 /**< Maximum amount requested from entropy sources */

-// Entropy options
-//
-#define ENTROPY_MAX_SOURCES                20 /**< Maximum number of sources supported */
-#define ENTROPY_MAX_GATHER                128 /**< Maximum amount requested from entropy sources */
+/* Memory buffer allocator options */
+//#define MEMORY_ALIGN_MULTIPLE               4 /**< Align on multiples of this value */

-// Memory buffer allocator options
-#define MEMORY_ALIGN_MULTIPLE               4 /**< Align on multiples of this value */
+/* Platform options */
+//#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
+//#define POLARSSL_PLATFORM_STD_MALLOC   malloc /**< Default allocator to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_FREE       free /**< Default free to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_PRINTF   printf /**< Default printf to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */

-// Platform options
-//
-#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include for default allocator. Don't define if no header is needed. */
-#define POLARSSL_PLATFORM_STD_MALLOC   malloc /**< Default allocator to use, can be undefined */
-#define POLARSSL_PLATFORM_STD_FREE       free /**< Default free to use, can be undefined */
-#define POLARSSL_PLATFORM_STD_PRINTF   printf /**< Default printf to use, can be undefined */
-#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
+/* SSL Cache options */
+//#define SSL_CACHE_DEFAULT_TIMEOUT       86400 /**< 1 day  */
+//#define SSL_CACHE_DEFAULT_MAX_ENTRIES      50 /**< Maximum entries in cache */

-// SSL Cache options
-//
-#define SSL_CACHE_DEFAULT_TIMEOUT       86400 /**< 1 day  */
-#define SSL_CACHE_DEFAULT_MAX_ENTRIES      50 /**< Maximum entries in cache */
-
-// SSL options
-//
-#define SSL_MAX_CONTENT_LEN             16384 /**< Size of the input / output buffer */
-#define SSL_DEFAULT_TICKET_LIFETIME     86400 /**< Lifetime of session tickets (if enabled) */
-
-#endif /* POLARSSL_CONFIG_OPTIONS */
+/* SSL options */
+//#define SSL_MAX_CONTENT_LEN             16384 /**< Size of the input / output buffer */
+//#define SSL_DEFAULT_TICKET_LIFETIME     86400 /**< Lifetime of session tickets (if enabled) */

 /* \} name */

--- a/include/polarssl/ctr_drbg.h
+++ b/include/polarssl/ctr_drbg.h
@ -42,17 +42,39 @@
 #define CTR_DRBG_SEEDLEN            ( CTR_DRBG_KEYSIZE + CTR_DRBG_BLOCKSIZE )
                                            /**< The seed length (counter + AES key)            */

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(CTR_DRBG_ENTROPY_LEN)
 #if defined(POLARSSL_SHA512_C) && !defined(POLARSSL_ENTROPY_FORCE_SHA256)
 #define CTR_DRBG_ENTROPY_LEN        48      /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
 #else
 #define CTR_DRBG_ENTROPY_LEN        32      /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
 #endif
+#endif
+
+#if !defined(CTR_DRBG_RESEED_INTERVAL)
 #define CTR_DRBG_RESEED_INTERVAL    10000   /**< Interval before reseed is performed by default */
+#endif
+
+#if !defined(CTR_DRBG_MAX_INPUT)
 #define CTR_DRBG_MAX_INPUT          256     /**< Maximum number of additional input bytes */
+#endif
+
+#if !defined(CTR_DRBG_MAX_REQUEST)
 #define CTR_DRBG_MAX_REQUEST        1024    /**< Maximum number of requested bytes per call */
+#endif
+
+#if !defined(CTR_DRBG_MAX_SEED_INPUT)
 #define CTR_DRBG_MAX_SEED_INPUT     384     /**< Maximum size of (re)seed buffer */
-#endif /* !POLARSSL_CONFIG_OPTIONS */
+#endif
+
+/* \} name SECTION: Module settings */

 #define CTR_DRBG_PR_OFF             0       /**< No prediction resistance       */
 #define CTR_DRBG_PR_ON              1       /**< Prediction resistance enabled  */
--- a/include/polarssl/ecp.h
+++ b/include/polarssl/ecp.h
@ -168,7 +168,15 @@ typedef struct
 }
 ecp_keypair;

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(POLARSSL_ECP_MAX_BITS)
 /**
 * Maximum size of the groups (that is, of N and P)
 */
@ -178,7 +186,7 @@ ecp_keypair;
 #define POLARSSL_ECP_MAX_BYTES    ( ( POLARSSL_ECP_MAX_BITS + 7 ) / 8 )
 #define POLARSSL_ECP_MAX_PT_LEN   ( 2 * POLARSSL_ECP_MAX_BYTES + 1 )

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+#if !defined(POLARSSL_ECP_WINDOW_SIZE)
 /*
 * Maximum "window" size used for point multiplication.
 * Default: 6.
@ -195,11 +203,14 @@ ecp_keypair;
 *      521       145     141     135     120      97
 *      384       214     209     198     177     146
 *      256       320     320     303     262     226
+
 *      224       475     475     453     398     342
 *      192       640     640     633     587     476
 */
 #define POLARSSL_ECP_WINDOW_SIZE    6   /**< Maximum window size used */
+#endif

+#if !defined(POLARSSL_ECP_FIXED_POINT_OPTIM)
 /*
 * Trade memory for speed on fixed-point multiplication.
 *
@ -214,6 +225,8 @@ ecp_keypair;
 #define POLARSSL_ECP_FIXED_POINT_OPTIM  1   /**< Enable fixed-point speed-up */
 #endif

+/* \} name SECTION: Module settings */
+
 /*
 * Point formats, from RFC 4492's enum ECPointFormat
 */
--- a/include/polarssl/entropy.h
+++ b/include/polarssl/entropy.h
@ -54,10 +54,23 @@
 #define POLARSSL_ERR_ENTROPY_NO_SOURCES_DEFINED            -0x0040  /**< No sources have been added to poll. */
 #define POLARSSL_ERR_ENTROPY_FILE_IO_ERROR                 -0x0058  /**< Read/write error in file. */

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(ENTROPY_MAX_SOURCES)
 #define ENTROPY_MAX_SOURCES     20      /**< Maximum number of sources supported */
+#endif
+
+#if !defined(ENTROPY_MAX_GATHER)
 #define ENTROPY_MAX_GATHER      128     /**< Maximum amount requested from entropy sources */
-#endif /* !POLARSSL_CONFIG_OPTIONS  */
+#endif
+
+/* \} name SECTION: Module settings */

 #if defined(POLARSSL_ENTROPY_SHA512_ACCUMULATOR)
 #define ENTROPY_BLOCK_SIZE      64      /**< Block size of entropy accumulator (SHA-512) */
--- a/include/polarssl/hmac_drbg.h
+++ b/include/polarssl/hmac_drbg.h
@ -37,12 +37,31 @@
 #define POLARSSL_ERR_HMAC_DRBG_FILE_IO_ERROR                -0x0007  /**< Read/write error in file. */
 #define POLARSSL_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED        -0x0009  /**< The entropy source failed. */

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(POLARSSL_HMAC_DRBG_RESEED_INTERVAL)
 #define POLARSSL_HMAC_DRBG_RESEED_INTERVAL   10000   /**< Interval before reseed is performed by default */
+#endif
+
+#if !defined(POLARSSL_HMAC_DRBG_MAX_INPUT)
 #define POLARSSL_HMAC_DRBG_MAX_INPUT         256     /**< Maximum number of additional input bytes */
+#endif
+
+#if !defined(POLARSSL_HMAC_DRBG_MAX_REQUEST)
 #define POLARSSL_HMAC_DRBG_MAX_REQUEST       1024    /**< Maximum number of requested bytes per call */
+#endif
+
+#if !defined(POLARSSL_HMAC_DRBG_MAX_SEED_INPUT)
 #define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT    384     /**< Maximum size of (re)seed buffer */
-#endif /* !POLARSSL_CONFIG_OPTIONS */
+#endif
+
+/* \} name SECTION: Module settings */

 #define POLARSSL_HMAC_DRBG_PR_OFF   0   /**< No prediction resistance       */
 #define POLARSSL_HMAC_DRBG_PR_ON    1   /**< Prediction resistance enabled  */
--- a/include/polarssl/memory_buffer_alloc.h
+++ b/include/polarssl/memory_buffer_alloc.h
@ -31,9 +31,19 @@

 #include <stdlib.h>

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(POLARSSL_MEMORY_ALIGN_MULTIPLE)
 #define POLARSSL_MEMORY_ALIGN_MULTIPLE       4 /**< Align on multiples of this value */
-#endif /* POLARSSL_CONFIG_OPTIONS */
+#endif
+
+/* \} name SECTION: Module settings */

 #define MEMORY_VERIFY_NONE         0
 #define MEMORY_VERIFY_ALLOC        (1 << 0)
--- a/include/polarssl/platform.h
+++ b/include/polarssl/platform.h
@ -35,17 +35,35 @@
 extern "C" {
 #endif

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(POLARSSL_PLATFORM_NO_STD_FUNCTIONS)
 #include <stdlib.h>
+#if !defined(POLARSSL_PLATFORM_STD_PRINTF)
 #define POLARSSL_PLATFORM_STD_PRINTF   printf /**< Default printf to use  */
+#endif
+#if !defined(POLARSSL_PLATFORM_STD_FPRINTF)
 #define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use */
+#endif
+#if !defined(POLARSSL_PLATFORM_STD_MALLOC)
 #define POLARSSL_PLATFORM_STD_MALLOC   malloc /**< Default allocator to use */
+#endif
+#if !defined(POLARSSL_PLATFORM_STD_FREE)
 #define POLARSSL_PLATFORM_STD_FREE       free /**< Default free to use */
-#else /* POLARSSL_CONFIG_OPTIONS */
+#endif
+#else /* POLARSSL_PLATFORM_NO_STD_FUNCTIONS */
 #if defined(POLARSSL_PLATFORM_STD_MEM_HDR)
 #include POLARSSL_PLATFORM_STD_MEM_HDR
 #endif
-#endif /* POLARSSL_CONFIG_OPTIONS */
+#endif /* POLARSSL_PLATFORM_NO_STD_FUNCTIONS */
+
+/* \} name SECTION: Module settings */

 /*
 * The function pointers for malloc and free
--- a/include/polarssl/ssl.h
+++ b/include/polarssl/ssl.h
@ -228,9 +228,17 @@
 #define SSL_SESSION_TICKETS_DISABLED     0
 #define SSL_SESSION_TICKETS_ENABLED      1

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(SSL_DEFAULT_TICKET_LIFETIME)
 #define SSL_DEFAULT_TICKET_LIFETIME     86400 /**< Lifetime of session tickets (if enabled) */
-#endif /* !POLARSSL_CONFIG_OPTIONS */
+#endif

 /*
 * Size of the input / output buffer.
@ -239,9 +247,11 @@
 * communicate with you anymore. Only change this value if you control
 * both sides of the connection and have it reduced at both sides!
 */
-#if !defined(POLARSSL_CONFIG_OPTIONS)
+#if !defined(SSL_MAX_CONTENT_LEN)
 #define SSL_MAX_CONTENT_LEN         16384   /**< Size of the input / output buffer */
-#endif /* !POLARSSL_CONFIG_OPTIONS */
+#endif
+
+/* \} name SECTION: Module settings */

 /*
 * Allow an extra 301 bytes for the record header
--- a/include/polarssl/ssl_cache.h
+++ b/include/polarssl/ssl_cache.h
@ -33,10 +33,23 @@
 #include "threading.h"
 #endif

-#if !defined(POLARSSL_CONFIG_OPTIONS)
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(SSL_CACHE_DEFAULT_TIMEOUT)
 #define SSL_CACHE_DEFAULT_TIMEOUT       86400   /*!< 1 day  */
+#endif
+
+#if !defined(SSL_CACHE_DEFAULT_MAX_ENTRIES)
 #define SSL_CACHE_DEFAULT_MAX_ENTRIES      50   /*!< Maximum entries in cache */
-#endif /* !POLARSSL_CONFIG_OPTIONS */
+#endif
+
+/* \} name SECTION: Module settings */

 #ifdef __cplusplus
 extern "C" {