From 12230eb5c8150359d7f2fd99c36fb334cc375b2c Mon Sep 17 00:00:00 2001 From: Gilles Peskine Date: Wed, 26 Feb 2020 19:02:33 +0100 Subject: [PATCH] Revert "Remove irrelevant configs" This reverts commit 1ad37309e4f17d73c2f22c3ff4bffe2523abe17c. Conflicts: * tests/scripts/test-ref-configs.pl: * config-ccm-psk-tls1_2.h: there has been an addition of "config-symmetric-only.h" at the place where the configurations that are added back were removed. Keep this configuration. --- configs/config-ccm-psk-tls1_2.h | 88 + configs/config-default.h | 3377 +++++++++++++++++++++++++++++ configs/config-mini-tls1_1.h | 75 + configs/config-thread.h | 90 + tests/scripts/test-ref-configs.pl | 10 +- 5 files changed, 3639 insertions(+), 1 deletion(-) create mode 100644 configs/config-ccm-psk-tls1_2.h create mode 100644 configs/config-default.h create mode 100644 configs/config-mini-tls1_1.h create mode 100644 configs/config-thread.h diff --git a/configs/config-ccm-psk-tls1_2.h b/configs/config-ccm-psk-tls1_2.h new file mode 100644 index 000000000..c9b58dd53 --- /dev/null +++ b/configs/config-ccm-psk-tls1_2.h @@ -0,0 +1,88 @@ +/** + * \file config-ccm-psk-tls1_2.h + * + * \brief Minimal configuration for TLS 1.2 with PSK and AES-CCM ciphersuites + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +/* + * Minimal configuration for TLS 1.2 with PSK and AES-CCM ciphersuites + * Distinguishing features: + * - no bignum, no PK, no X509 + * - fully modern and secure (provided the pre-shared keys have high entropy) + * - very low record overhead with CCM-8 + * - optimized for low RAM usage + * + * See README.txt for usage instructions. + */ +#ifndef MBEDTLS_CONFIG_H +#define MBEDTLS_CONFIG_H + +/* System support */ +//#define MBEDTLS_HAVE_TIME /* Optionally used in Hello messages */ +/* Other MBEDTLS_HAVE_XXX flags irrelevant for this configuration */ + +/* mbed TLS feature support */ +#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED +#define MBEDTLS_SSL_PROTO_TLS1_2 + +/* mbed TLS modules */ +#define MBEDTLS_AES_C +#define MBEDTLS_CCM_C +#define MBEDTLS_CIPHER_C +#define MBEDTLS_CTR_DRBG_C +#define MBEDTLS_ENTROPY_C +#define MBEDTLS_MD_C +#define MBEDTLS_NET_C +#define MBEDTLS_SHA256_C +#define MBEDTLS_SSL_CLI_C +#define MBEDTLS_SSL_SRV_C +#define MBEDTLS_SSL_TLS_C + +/* Save RAM at the expense of ROM */ +#define MBEDTLS_AES_ROM_TABLES + +/* Save some RAM by adjusting to your exact needs */ +#define MBEDTLS_PSK_MAX_LEN 16 /* 128-bits keys are generally enough */ + +/* + * You should adjust this to the exact number of sources you're using: default + * is the "platform_entropy_poll" source, but you may want to add other ones + * Minimum is 2 for the entropy test suite. + */ +#define MBEDTLS_ENTROPY_MAX_SOURCES 2 + +/* + * Use only CCM_8 ciphersuites, and + * save ROM and a few bytes of RAM by specifying our own ciphersuite list + */ +#define MBEDTLS_SSL_CIPHERSUITES \ + MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8, \ + MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8 + +/* + * Save RAM at the expense of interoperability: do this only if you control + * both ends of the connection! (See comments in "mbedtls/ssl.h".) + * The optimal size here depends on the typical size of records. + */ +#define MBEDTLS_SSL_MAX_CONTENT_LEN 1024 + +#include "mbedtls/check_config.h" + +#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-default.h b/configs/config-default.h new file mode 100644 index 000000000..e6abf24d5 --- /dev/null +++ b/configs/config-default.h @@ -0,0 +1,3377 @@ +/** + * \file config.h + * + * \brief Configuration options (set of defines) + * + * This set of compile-time options may be used to enable + * or disable features selectively, and reduce the global + * memory footprint. + */ +/* + * Copyright (C) 2006-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CONFIG_H +#define MBEDTLS_CONFIG_H + +#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) +#define _CRT_SECURE_NO_DEPRECATE 1 +#endif + +/** + * \name SECTION: System support + * + * This section sets system specific settings. + * \{ + */ + +/** + * \def MBEDTLS_HAVE_ASM + * + * The compiler has support for asm(). + * + * Requires support for asm() in compiler. + * + * Used in: + * library/aria.c + * library/timing.c + * include/mbedtls/bn_mul.h + * + * Required by: + * MBEDTLS_AESNI_C + * MBEDTLS_PADLOCK_C + * + * Comment to disable the use of assembly code. + */ +#define MBEDTLS_HAVE_ASM + +/** + * \def MBEDTLS_NO_UDBL_DIVISION + * + * The platform lacks support for double-width integer division (64-bit + * division on a 32-bit platform, 128-bit division on a 64-bit platform). + * + * Used in: + * include/mbedtls/bignum.h + * library/bignum.c + * + * The bignum code uses double-width division to speed up some operations. + * Double-width division is often implemented in software that needs to + * be linked with the program. The presence of a double-width integer + * type is usually detected automatically through preprocessor macros, + * but the automatic detection cannot know whether the code needs to + * and can be linked with an implementation of division for that type. + * By default division is assumed to be usable if the type is present. + * Uncomment this option to prevent the use of double-width division. + * + * Note that division for the native integer type is always required. + * Furthermore, a 64-bit type is always required even on a 32-bit + * platform, but it need not support multiplication or division. In some + * cases it is also desirable to disable some double-width operations. For + * example, if double-width division is implemented in software, disabling + * it can reduce code size in some embedded targets. + */ +//#define MBEDTLS_NO_UDBL_DIVISION + +/** + * \def MBEDTLS_NO_64BIT_MULTIPLICATION + * + * The platform lacks support for 32x32 -> 64-bit multiplication. + * + * Used in: + * library/poly1305.c + * + * Some parts of the library may use multiplication of two unsigned 32-bit + * operands with a 64-bit result in order to speed up computations. On some + * platforms, this is not available in hardware and has to be implemented in + * software, usually in a library provided by the toolchain. + * + * Sometimes it is not desirable to have to link to that library. This option + * removes the dependency of that library on platforms that lack a hardware + * 64-bit multiplier by embedding a software implementation in Mbed TLS. + * + * Note that depending on the compiler, this may decrease performance compared + * to using the library function provided by the toolchain. + */ +//#define MBEDTLS_NO_64BIT_MULTIPLICATION + +/** + * \def MBEDTLS_HAVE_SSE2 + * + * CPU supports SSE2 instruction set. + * + * Uncomment if the CPU supports SSE2 (IA-32 specific). + */ +//#define MBEDTLS_HAVE_SSE2 + +/** + * \def MBEDTLS_HAVE_TIME + * + * System has time.h and time(). + * The time does not need to be correct, only time differences are used, + * by contrast with MBEDTLS_HAVE_TIME_DATE + * + * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT, + * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and + * MBEDTLS_PLATFORM_STD_TIME. + * + * Comment if your system does not support time functions + */ +#define MBEDTLS_HAVE_TIME + +/** + * \def MBEDTLS_HAVE_TIME_DATE + * + * System has time.h, time(), and an implementation for + * mbedtls_platform_gmtime_r() (see below). + * The time needs to be correct (not necessarily very accurate, but at least + * the date should be correct). This is used to verify the validity period of + * X.509 certificates. + * + * Comment if your system does not have a correct clock. + * + * \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that + * behaves similarly to the gmtime_r() function from the C standard. Refer to + * the documentation for mbedtls_platform_gmtime_r() for more information. + * + * \note It is possible to configure an implementation for + * mbedtls_platform_gmtime_r() at compile-time by using the macro + * MBEDTLS_PLATFORM_GMTIME_R_ALT. + */ +#define MBEDTLS_HAVE_TIME_DATE + +/** + * \def MBEDTLS_PLATFORM_MEMORY + * + * Enable the memory allocation layer. + * + * By default mbed TLS uses the system-provided calloc() and free(). + * This allows different allocators (self-implemented or provided) to be + * provided to the platform abstraction layer. + * + * Enabling MBEDTLS_PLATFORM_MEMORY without the + * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide + * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and + * free() function pointer at runtime. + * + * Enabling MBEDTLS_PLATFORM_MEMORY and specifying + * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the + * alternate function at compile time. + * + * Requires: MBEDTLS_PLATFORM_C + * + * Enable this layer to allow use of alternative memory allocators. + */ +//#define MBEDTLS_PLATFORM_MEMORY + +/** + * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS + * + * Do not assign standard functions in the platform layer (e.g. calloc() to + * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) + * + * This makes sure there are no linking errors on platforms that do not support + * these functions. You will HAVE to provide alternatives, either at runtime + * via the platform_set_xxx() functions or at compile time by setting + * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a + * MBEDTLS_PLATFORM_XXX_MACRO. + * + * Requires: MBEDTLS_PLATFORM_C + * + * Uncomment to prevent default assignment of standard functions in the + * platform layer. + */ +//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS + +/** + * \def MBEDTLS_PLATFORM_EXIT_ALT + * + * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the + * function in the platform abstraction layer. + * + * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will + * provide a function "mbedtls_platform_set_printf()" that allows you to set an + * alternative printf function pointer. + * + * All these define require MBEDTLS_PLATFORM_C to be defined! + * + * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; + * it will be enabled automatically by check_config.h + * + * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as + * MBEDTLS_PLATFORM_XXX_MACRO! + * + * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME + * + * Uncomment a macro to enable alternate implementation of specific base + * platform function + */ +//#define MBEDTLS_PLATFORM_EXIT_ALT +//#define MBEDTLS_PLATFORM_TIME_ALT +//#define MBEDTLS_PLATFORM_FPRINTF_ALT +//#define MBEDTLS_PLATFORM_PRINTF_ALT +//#define MBEDTLS_PLATFORM_SNPRINTF_ALT +//#define MBEDTLS_PLATFORM_VSNPRINTF_ALT +//#define MBEDTLS_PLATFORM_NV_SEED_ALT +//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT + +/** + * \def MBEDTLS_DEPRECATED_WARNING + * + * Mark deprecated functions so that they generate a warning if used. + * Functions deprecated in one version will usually be removed in the next + * version. You can enable this to help you prepare the transition to a new + * major version by making sure your code is not using these functions. + * + * This only works with GCC and Clang. With other compilers, you may want to + * use MBEDTLS_DEPRECATED_REMOVED + * + * Uncomment to get warnings on using deprecated functions. + */ +//#define MBEDTLS_DEPRECATED_WARNING + +/** + * \def MBEDTLS_DEPRECATED_REMOVED + * + * Remove deprecated functions so that they generate an error if used. + * Functions deprecated in one version will usually be removed in the next + * version. You can enable this to help you prepare the transition to a new + * major version by making sure your code is not using these functions. + * + * Uncomment to get errors on using deprecated functions. + */ +//#define MBEDTLS_DEPRECATED_REMOVED + +/** + * \def MBEDTLS_CHECK_PARAMS + * + * This configuration option controls whether the library validates more of + * the parameters passed to it. + * + * When this flag is not defined, the library only attempts to validate an + * input parameter if: (1) they may come from the outside world (such as the + * network, the filesystem, etc.) or (2) not validating them could result in + * internal memory errors such as overflowing a buffer controlled by the + * library. On the other hand, it doesn't attempt to validate parameters whose + * values are fully controlled by the application (such as pointers). + * + * When this flag is defined, the library additionally attempts to validate + * parameters that are fully controlled by the application, and should always + * be valid if the application code is fully correct and trusted. + * + * For example, when a function accepts as input a pointer to a buffer that may + * contain untrusted data, and its documentation mentions that this pointer + * must not be NULL: + * - the pointer is checked to be non-NULL only if this option is enabled + * - the content of the buffer is always validated + * + * When this flag is defined, if a library function receives a parameter that + * is invalid, it will: + * - invoke the macro MBEDTLS_PARAM_FAILED() which by default expands to a + * call to the function mbedtls_param_failed() + * - immediately return (with a specific error code unless the function + * returns void and can't communicate an error). + * + * When defining this flag, you also need to: + * - either provide a definition of the function mbedtls_param_failed() in + * your application (see platform_util.h for its prototype) as the library + * calls that function, but does not provide a default definition for it, + * - or provide a different definition of the macro MBEDTLS_PARAM_FAILED() + * below if the above mechanism is not flexible enough to suit your needs. + * See the documentation of this macro later in this file. + * + * Uncomment to enable validation of application-controlled parameters. + */ +//#define MBEDTLS_CHECK_PARAMS + +/* \} name SECTION: System support */ + +/** + * \name SECTION: mbed TLS feature support + * + * This section sets support for features that are or are not needed + * within the modules that are enabled. + * \{ + */ + +/** + * \def MBEDTLS_TIMING_ALT + * + * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), + * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() + * + * Only works if you have MBEDTLS_TIMING_C enabled. + * + * You will need to provide a header "timing_alt.h" and an implementation at + * compile time. + */ +//#define MBEDTLS_TIMING_ALT + +/** + * \def MBEDTLS_AES_ALT + * + * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your + * alternate core implementation of a symmetric crypto, an arithmetic or hash + * module (e.g. platform specific assembly optimized implementations). Keep + * in mind that the function prototypes should remain the same. + * + * This replaces the whole module. If you only want to replace one of the + * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. + * + * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer + * provide the "struct mbedtls_aes_context" definition and omit the base + * function declarations and implementations. "aes_alt.h" will be included from + * "aes.h" to include the new function definitions. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * module. + * + * \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their + * use constitutes a security risk. If possible, we recommend + * avoiding dependencies on them, and considering stronger message + * digests and ciphers instead. + * + */ +//#define MBEDTLS_AES_ALT +//#define MBEDTLS_ARC4_ALT +//#define MBEDTLS_ARIA_ALT +//#define MBEDTLS_BLOWFISH_ALT +//#define MBEDTLS_CAMELLIA_ALT +//#define MBEDTLS_CCM_ALT +//#define MBEDTLS_CHACHA20_ALT +//#define MBEDTLS_CHACHAPOLY_ALT +//#define MBEDTLS_CMAC_ALT +//#define MBEDTLS_DES_ALT +//#define MBEDTLS_DHM_ALT +//#define MBEDTLS_ECJPAKE_ALT +//#define MBEDTLS_GCM_ALT +//#define MBEDTLS_NIST_KW_ALT +//#define MBEDTLS_MD2_ALT +//#define MBEDTLS_MD4_ALT +//#define MBEDTLS_MD5_ALT +//#define MBEDTLS_POLY1305_ALT +//#define MBEDTLS_RIPEMD160_ALT +//#define MBEDTLS_RSA_ALT +//#define MBEDTLS_SHA1_ALT +//#define MBEDTLS_SHA256_ALT +//#define MBEDTLS_SHA512_ALT +//#define MBEDTLS_XTEA_ALT + +/* + * When replacing the elliptic curve module, pleace consider, that it is + * implemented with two .c files: + * - ecp.c + * - ecp_curves.c + * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT + * macros as described above. The only difference is that you have to make sure + * that you provide functionality for both .c files. + */ +//#define MBEDTLS_ECP_ALT + +/** + * \def MBEDTLS_MD2_PROCESS_ALT + * + * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you + * alternate core implementation of symmetric crypto or hash function. Keep in + * mind that function prototypes should remain the same. + * + * This replaces only one function. The header file from mbed TLS is still + * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. + * + * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will + * no longer provide the mbedtls_sha1_process() function, but it will still provide + * the other function (using your mbedtls_sha1_process() function) and the definition + * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible + * with this definition. + * + * \note Because of a signature change, the core AES encryption and decryption routines are + * currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt, + * respectively. When setting up alternative implementations, these functions should + * be overridden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt + * must stay untouched. + * + * \note If you use the AES_xxx_ALT macros, then is is recommended to also set + * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES + * tables. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * function. + * + * \warning MD2, MD4, MD5, DES and SHA-1 are considered weak and their use + * constitutes a security risk. If possible, we recommend avoiding + * dependencies on them, and considering stronger message digests + * and ciphers instead. + * + */ +//#define MBEDTLS_MD2_PROCESS_ALT +//#define MBEDTLS_MD4_PROCESS_ALT +//#define MBEDTLS_MD5_PROCESS_ALT +//#define MBEDTLS_RIPEMD160_PROCESS_ALT +//#define MBEDTLS_SHA1_PROCESS_ALT +//#define MBEDTLS_SHA256_PROCESS_ALT +//#define MBEDTLS_SHA512_PROCESS_ALT +//#define MBEDTLS_DES_SETKEY_ALT +//#define MBEDTLS_DES_CRYPT_ECB_ALT +//#define MBEDTLS_DES3_CRYPT_ECB_ALT +//#define MBEDTLS_AES_SETKEY_ENC_ALT +//#define MBEDTLS_AES_SETKEY_DEC_ALT +//#define MBEDTLS_AES_ENCRYPT_ALT +//#define MBEDTLS_AES_DECRYPT_ALT +//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT +//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT +//#define MBEDTLS_ECDSA_VERIFY_ALT +//#define MBEDTLS_ECDSA_SIGN_ALT +//#define MBEDTLS_ECDSA_GENKEY_ALT + +/** + * \def MBEDTLS_ECP_INTERNAL_ALT + * + * Expose a part of the internal interface of the Elliptic Curve Point module. + * + * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your + * alternative core implementation of elliptic curve arithmetic. Keep in mind + * that function prototypes should remain the same. + * + * This partially replaces one function. The header file from mbed TLS is still + * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation + * is still present and it is used for group structures not supported by the + * alternative. + * + * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT + * and implementing the following functions: + * unsigned char mbedtls_internal_ecp_grp_capable( + * const mbedtls_ecp_group *grp ) + * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ) + * void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp ) + * The mbedtls_internal_ecp_grp_capable function should return 1 if the + * replacement functions implement arithmetic for the given group and 0 + * otherwise. + * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are + * called before and after each point operation and provide an opportunity to + * implement optimized set up and tear down instructions. + * + * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and + * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac + * function, but will use your mbedtls_internal_ecp_double_jac if the group is + * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when + * receives it as an argument). If the group is not supported then the original + * implementation is used. The other functions and the definition of + * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your + * implementation of mbedtls_internal_ecp_double_jac and + * mbedtls_internal_ecp_grp_capable must be compatible with this definition. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * function. + */ +/* Required for all the functions in this section */ +//#define MBEDTLS_ECP_INTERNAL_ALT +/* Support for Weierstrass curves with Jacobi representation */ +//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT +//#define MBEDTLS_ECP_ADD_MIXED_ALT +//#define MBEDTLS_ECP_DOUBLE_JAC_ALT +//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT +//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT +/* Support for curves with Montgomery arithmetic */ +//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT +//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT +//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT + +/** + * \def MBEDTLS_TEST_NULL_ENTROPY + * + * Enables testing and use of mbed TLS without any configured entropy sources. + * This permits use of the library on platforms before an entropy source has + * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the + * MBEDTLS_ENTROPY_NV_SEED switches). + * + * WARNING! This switch MUST be disabled in production builds, and is suitable + * only for development. + * Enabling the switch negates any security provided by the library. + * + * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + * + */ +//#define MBEDTLS_TEST_NULL_ENTROPY + +/** + * \def MBEDTLS_ENTROPY_HARDWARE_ALT + * + * Uncomment this macro to let mbed TLS use your own implementation of a + * hardware entropy collector. + * + * Your function must be called \c mbedtls_hardware_poll(), have the same + * prototype as declared in entropy_poll.h, and accept NULL as first argument. + * + * Uncomment to use your own hardware entropy collector. + */ +//#define MBEDTLS_ENTROPY_HARDWARE_ALT + +/** + * \def MBEDTLS_AES_ROM_TABLES + * + * Use precomputed AES tables stored in ROM. + * + * Uncomment this macro to use precomputed AES tables stored in ROM. + * Comment this macro to generate AES tables in RAM at runtime. + * + * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb + * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the + * initialization time before the first AES operation can be performed. + * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c + * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded + * performance if ROM access is slower than RAM access. + * + * This option is independent of \c MBEDTLS_AES_FEWER_TABLES. + * + */ +//#define MBEDTLS_AES_ROM_TABLES + +/** + * \def MBEDTLS_AES_FEWER_TABLES + * + * Use less ROM/RAM for AES tables. + * + * Uncommenting this macro omits 75% of the AES tables from + * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES) + * by computing their values on the fly during operations + * (the tables are entry-wise rotations of one another). + * + * Tradeoff: Uncommenting this reduces the RAM / ROM footprint + * by ~6kb but at the cost of more arithmetic operations during + * runtime. Specifically, one has to compare 4 accesses within + * different tables to 4 accesses with additional arithmetic + * operations within the same table. The performance gain/loss + * depends on the system and memory details. + * + * This option is independent of \c MBEDTLS_AES_ROM_TABLES. + * + */ +//#define MBEDTLS_AES_FEWER_TABLES + +/** + * \def MBEDTLS_CAMELLIA_SMALL_MEMORY + * + * Use less ROM for the Camellia implementation (saves about 768 bytes). + * + * Uncomment this macro to use less memory for Camellia. + */ +//#define MBEDTLS_CAMELLIA_SMALL_MEMORY + +/** + * \def MBEDTLS_CIPHER_MODE_CBC + * + * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CBC + +/** + * \def MBEDTLS_CIPHER_MODE_CFB + * + * Enable Cipher Feedback mode (CFB) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CFB + +/** + * \def MBEDTLS_CIPHER_MODE_CTR + * + * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CTR + +/** + * \def MBEDTLS_CIPHER_MODE_OFB + * + * Enable Output Feedback mode (OFB) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_OFB + +/** + * \def MBEDTLS_CIPHER_MODE_XTS + * + * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES. + */ +#define MBEDTLS_CIPHER_MODE_XTS + +/** + * \def MBEDTLS_CIPHER_NULL_CIPHER + * + * Enable NULL cipher. + * Warning: Only do so when you know what you are doing. This allows for + * encryption or channels without any security! + * + * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable + * the following ciphersuites: + * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_RSA_WITH_NULL_SHA256 + * MBEDTLS_TLS_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_RSA_WITH_NULL_MD5 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_PSK_WITH_NULL_SHA + * + * Uncomment this macro to enable the NULL cipher and ciphersuites + */ +//#define MBEDTLS_CIPHER_NULL_CIPHER + +/** + * \def MBEDTLS_CIPHER_PADDING_PKCS7 + * + * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for + * specific padding modes in the cipher layer with cipher modes that support + * padding (e.g. CBC) + * + * If you disable all padding modes, only full blocks can be used with CBC. + * + * Enable padding modes in the cipher layer. + */ +#define MBEDTLS_CIPHER_PADDING_PKCS7 +#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS +#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN +#define MBEDTLS_CIPHER_PADDING_ZEROS + +/** + * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES + * + * Enable weak ciphersuites in SSL / TLS. + * Warning: Only do so when you know what you are doing. This allows for + * channels with virtually no security at all! + * + * This enables the following ciphersuites: + * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA + * + * Uncomment this macro to enable weak ciphersuites + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + */ +//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES + +/** + * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES + * + * Remove RC4 ciphersuites by default in SSL / TLS. + * This flag removes the ciphersuites based on RC4 from the default list as + * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to + * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them + * explicitly. + * + * Uncomment this macro to remove RC4 ciphersuites by default. + */ +#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES + +/** + * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED + * + * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve + * module. By default all supported curves are enabled. + * + * Comment macros to disable the curve and functions for it + */ +#define MBEDTLS_ECP_DP_SECP192R1_ENABLED +#define MBEDTLS_ECP_DP_SECP224R1_ENABLED +#define MBEDTLS_ECP_DP_SECP256R1_ENABLED +#define MBEDTLS_ECP_DP_SECP384R1_ENABLED +#define MBEDTLS_ECP_DP_SECP521R1_ENABLED +#define MBEDTLS_ECP_DP_SECP192K1_ENABLED +#define MBEDTLS_ECP_DP_SECP224K1_ENABLED +#define MBEDTLS_ECP_DP_SECP256K1_ENABLED +#define MBEDTLS_ECP_DP_BP256R1_ENABLED +#define MBEDTLS_ECP_DP_BP384R1_ENABLED +#define MBEDTLS_ECP_DP_BP512R1_ENABLED +#define MBEDTLS_ECP_DP_CURVE25519_ENABLED +#define MBEDTLS_ECP_DP_CURVE448_ENABLED + +/** + * \def MBEDTLS_ECP_NIST_OPTIM + * + * Enable specific 'modulo p' routines for each NIST prime. + * Depending on the prime and architecture, makes operations 4 to 8 times + * faster on the corresponding curve. + * + * Comment this macro to disable NIST curves optimisation. + */ +#define MBEDTLS_ECP_NIST_OPTIM + +/** + * \def MBEDTLS_ECP_RESTARTABLE + * + * Enable "non-blocking" ECC operations that can return early and be resumed. + * + * This allows various functions to pause by returning + * #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module, + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in + * order to further progress and eventually complete their operation. This is + * controlled through mbedtls_ecp_set_max_ops() which limits the maximum + * number of ECC operations a function may perform before pausing; see + * mbedtls_ecp_set_max_ops() for more information. + * + * This is useful in non-threaded environments if you want to avoid blocking + * for too long on ECC (and, hence, X.509 or SSL/TLS) operations. + * + * Uncomment this macro to enable restartable ECC computations. + * + * \note This option only works with the default software implementation of + * elliptic curve functionality. It is incompatible with + * MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT and MBEDTLS_ECDSA_XXX_ALT. + */ +//#define MBEDTLS_ECP_RESTARTABLE + +/** + * \def MBEDTLS_ECDSA_DETERMINISTIC + * + * Enable deterministic ECDSA (RFC 6979). + * Standard ECDSA is "fragile" in the sense that lack of entropy when signing + * may result in a compromise of the long-term signing key. This is avoided by + * the deterministic variant. + * + * Requires: MBEDTLS_HMAC_DRBG_C + * + * Comment this macro to disable deterministic ECDSA. + */ +#define MBEDTLS_ECDSA_DETERMINISTIC + +/** + * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED + * + * Enable the PSK based ciphersuite modes in SSL / TLS. + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED + * + * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_DHM_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED + * + * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED + * + * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED + * + * Enable the RSA-only based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 + */ +#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED + * + * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED + * + * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + * + * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + * + * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED + * + * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED + * + * Enable the ECJPAKE based ciphersuite modes in SSL / TLS. + * + * \warning This is currently experimental. EC J-PAKE support is based on the + * Thread v1.0.0 specification; incompatible changes to the specification + * might still happen. For this reason, this is disabled by default. + * + * Requires: MBEDTLS_ECJPAKE_C + * MBEDTLS_SHA256_C + * MBEDTLS_ECP_DP_SECP256R1_ENABLED + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 + */ +//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED + +/** + * \def MBEDTLS_PK_PARSE_EC_EXTENDED + * + * Enhance support for reading EC keys using variants of SEC1 not allowed by + * RFC 5915 and RFC 5480. + * + * Currently this means parsing the SpecifiedECDomain choice of EC + * parameters (only known groups are supported, not arbitrary domains, to + * avoid validation issues). + * + * Disable if you only need to support RFC 5915 + 5480 key formats. + */ +#define MBEDTLS_PK_PARSE_EC_EXTENDED + +/** + * \def MBEDTLS_ERROR_STRERROR_DUMMY + * + * Enable a dummy error function to make use of mbedtls_strerror() in + * third party libraries easier when MBEDTLS_ERROR_C is disabled + * (no effect when MBEDTLS_ERROR_C is enabled). + * + * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're + * not using mbedtls_strerror() or error_strerror() in your application. + * + * Disable if you run into name conflicts and want to really remove the + * mbedtls_strerror() + */ +#define MBEDTLS_ERROR_STRERROR_DUMMY + +/** + * \def MBEDTLS_GENPRIME + * + * Enable the prime-number generation code. + * + * Requires: MBEDTLS_BIGNUM_C + */ +#define MBEDTLS_GENPRIME + +/** + * \def MBEDTLS_FS_IO + * + * Enable functions that use the filesystem. + */ +#define MBEDTLS_FS_IO + +/** + * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + * + * Do not add default entropy sources. These are the platform specific, + * mbedtls_timing_hardclock and HAVEGE based poll functions. + * + * This is useful to have more control over the added entropy sources in an + * application. + * + * Uncomment this macro to prevent loading of default entropy functions. + */ +//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + +/** + * \def MBEDTLS_NO_PLATFORM_ENTROPY + * + * Do not use built-in platform entropy functions. + * This is useful if your platform does not support + * standards like the /dev/urandom or Windows CryptoAPI. + * + * Uncomment this macro to disable the built-in platform entropy functions. + */ +//#define MBEDTLS_NO_PLATFORM_ENTROPY + +/** + * \def MBEDTLS_ENTROPY_FORCE_SHA256 + * + * Force the entropy accumulator to use a SHA-256 accumulator instead of the + * default SHA-512 based one (if both are available). + * + * Requires: MBEDTLS_SHA256_C + * + * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option + * if you have performance concerns. + * + * This option is only useful if both MBEDTLS_SHA256_C and + * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. + */ +//#define MBEDTLS_ENTROPY_FORCE_SHA256 + +/** + * \def MBEDTLS_ENTROPY_NV_SEED + * + * Enable the non-volatile (NV) seed file-based entropy source. + * (Also enables the NV seed read/write functions in the platform layer) + * + * This is crucial (if not required) on systems that do not have a + * cryptographic entropy source (in hardware or kernel) available. + * + * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C + * + * \note The read/write functions that are used by the entropy source are + * determined in the platform layer, and can be modified at runtime and/or + * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used. + * + * \note If you use the default implementation functions that read a seedfile + * with regular fopen(), please make sure you make a seedfile with the + * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at + * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from + * and written to or you will get an entropy source error! The default + * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE + * bytes from the file. + * + * \note The entropy collector will write to the seed file before entropy is + * given to an external source, to update it. + */ +//#define MBEDTLS_ENTROPY_NV_SEED + +/** + * \def MBEDTLS_MEMORY_DEBUG + * + * Enable debugging of buffer allocator memory issues. Automatically prints + * (to stderr) all (fatal) messages on memory allocation issues. Enables + * function for 'debug output' of allocated memory. + * + * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C + * + * Uncomment this macro to let the buffer allocator print out error messages. + */ +//#define MBEDTLS_MEMORY_DEBUG + +/** + * \def MBEDTLS_MEMORY_BACKTRACE + * + * Include backtrace information with each allocated block. + * + * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C + * GLIBC-compatible backtrace() an backtrace_symbols() support + * + * Uncomment this macro to include backtrace information + */ +//#define MBEDTLS_MEMORY_BACKTRACE + +/** + * \def MBEDTLS_PK_RSA_ALT_SUPPORT + * + * Support external private RSA keys (eg from a HSM) in the PK layer. + * + * Comment this macro to disable support for external private RSA keys. + */ +#define MBEDTLS_PK_RSA_ALT_SUPPORT + +/** + * \def MBEDTLS_PKCS1_V15 + * + * Enable support for PKCS#1 v1.5 encoding. + * + * Requires: MBEDTLS_RSA_C + * + * This enables support for PKCS#1 v1.5 operations. + */ +#define MBEDTLS_PKCS1_V15 + +/** + * \def MBEDTLS_PKCS1_V21 + * + * Enable support for PKCS#1 v2.1 encoding. + * + * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C + * + * This enables support for RSAES-OAEP and RSASSA-PSS operations. + */ +#define MBEDTLS_PKCS1_V21 + +/** + * \def MBEDTLS_PSA_CRYPTO_SPM + * + * When MBEDTLS_PSA_CRYPTO_SPM is defined, the code is built for SPM (Secure + * Partition Manager) integration which separates the code into two parts: a + * NSPE (Non-Secure Process Environment) and an SPE (Secure Process + * Environment). + * + * Module: library/psa_crypto.c + * Requires: MBEDTLS_PSA_CRYPTO_C + * + */ +//#define MBEDTLS_PSA_CRYPTO_SPM + +/** + * \def MBEDTLS_PSA_HAS_ITS_IO + * + * Enable the non-volatile secure storage usage. + * + * This is crucial on systems that do not have a HW TRNG support. + * + */ +//#define MBEDTLS_PSA_HAS_ITS_IO + +/** + * \def MBEDTLS_RSA_NO_CRT + * + * Do not use the Chinese Remainder Theorem + * for the RSA private operation. + * + * Uncomment this macro to disable the use of CRT in RSA. + * + */ +//#define MBEDTLS_RSA_NO_CRT + +/** + * \def MBEDTLS_SELF_TEST + * + * Enable the checkup functions (*_self_test). + */ +#define MBEDTLS_SELF_TEST + +/** + * \def MBEDTLS_SHA256_SMALLER + * + * Enable an implementation of SHA-256 that has lower ROM footprint but also + * lower performance. + * + * The default implementation is meant to be a reasonnable compromise between + * performance and size. This version optimizes more aggressively for size at + * the expense of performance. Eg on Cortex-M4 it reduces the size of + * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about + * 30%. + * + * Uncomment to enable the smaller implementation of SHA256. + */ +//#define MBEDTLS_SHA256_SMALLER + +/** + * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES + * + * Enable sending of alert messages in case of encountered errors as per RFC. + * If you choose not to send the alert messages, mbed TLS can still communicate + * with other servers, only debugging of failures is harder. + * + * The advantage of not sending alert messages, is that no information is given + * about reasons for failures thus preventing adversaries of gaining intel. + * + * Enable sending of all alert messages + */ +#define MBEDTLS_SSL_ALL_ALERT_MESSAGES + +/** + * \def MBEDTLS_SSL_ASYNC_PRIVATE + * + * Enable asynchronous external private key operations in SSL. This allows + * you to configure an SSL connection to call an external cryptographic + * module to perform private key operations instead of performing the + * operation inside the library. + * + */ +//#define MBEDTLS_SSL_ASYNC_PRIVATE + +/** + * \def MBEDTLS_SSL_DEBUG_ALL + * + * Enable the debug messages in SSL module for all issues. + * Debug messages have been disabled in some places to prevent timing + * attacks due to (unbalanced) debugging function calls. + * + * If you need all error reporting you should enable this during debugging, + * but remove this for production servers that should log as well. + * + * Uncomment this macro to report all debug messages on errors introducing + * a timing side-channel. + * + */ +//#define MBEDTLS_SSL_DEBUG_ALL + +/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC + * + * Enable support for Encrypt-then-MAC, RFC 7366. + * + * This allows peers that both support it to use a more robust protection for + * ciphersuites using CBC, providing deep resistance against timing attacks + * on the padding or underlying cipher. + * + * This only affects CBC ciphersuites, and is useless if none is defined. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1 or + * MBEDTLS_SSL_PROTO_TLS1_1 or + * MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for Encrypt-then-MAC + */ +#define MBEDTLS_SSL_ENCRYPT_THEN_MAC + +/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET + * + * Enable support for Extended Master Secret, aka Session Hash + * (draft-ietf-tls-session-hash-02). + * + * This was introduced as "the proper fix" to the Triple Handshake familiy of + * attacks, but it is recommended to always use it (even if you disable + * renegotiation), since it actually fixes a more fundamental issue in the + * original SSL/TLS design, and has implications beyond Triple Handshake. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1 or + * MBEDTLS_SSL_PROTO_TLS1_1 or + * MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for Extended Master Secret. + */ +#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET + +/** + * \def MBEDTLS_SSL_FALLBACK_SCSV + * + * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). + * + * For servers, it is recommended to always enable this, unless you support + * only one version of TLS, or know for sure that none of your clients + * implements a fallback strategy. + * + * For clients, you only need this if you're using a fallback strategy, which + * is not recommended in the first place, unless you absolutely need it to + * interoperate with buggy (version-intolerant) servers. + * + * Comment this macro to disable support for FALLBACK_SCSV + */ +#define MBEDTLS_SSL_FALLBACK_SCSV + +/** + * \def MBEDTLS_SSL_HW_RECORD_ACCEL + * + * Enable hooking functions in SSL module for hardware acceleration of + * individual records. + * + * Uncomment this macro to enable hooking functions. + */ +//#define MBEDTLS_SSL_HW_RECORD_ACCEL + +/** + * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING + * + * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. + * + * This is a countermeasure to the BEAST attack, which also minimizes the risk + * of interoperability issues compared to sending 0-length records. + * + * Comment this macro to disable 1/n-1 record splitting. + */ +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING + +/** + * \def MBEDTLS_SSL_RENEGOTIATION + * + * Enable support for TLS renegotiation. + * + * The two main uses of renegotiation are (1) refresh keys on long-lived + * connections and (2) client authentication after the initial handshake. + * If you don't need renegotiation, it's probably better to disable it, since + * it has been associated with security issues in the past and is easy to + * misuse/misunderstand. + * + * Comment this to disable support for renegotiation. + * + * \note Even if this option is disabled, both client and server are aware + * of the Renegotiation Indication Extension (RFC 5746) used to + * prevent the SSL renegotiation attack (see RFC 5746 Sect. 1). + * (See \c mbedtls_ssl_conf_legacy_renegotiation for the + * configuration of this extension). + * + */ +#define MBEDTLS_SSL_RENEGOTIATION + +/** + * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + * + * Enable support for receiving and parsing SSLv2 Client Hello messages for the + * SSL Server module (MBEDTLS_SSL_SRV_C). + * + * Uncomment this macro to enable support for SSLv2 Client Hello messages. + */ +//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + +/** + * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE + * + * Pick the ciphersuite according to the client's preferences rather than ours + * in the SSL Server module (MBEDTLS_SSL_SRV_C). + * + * Uncomment this macro to respect client's ciphersuite order + */ +//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE + +/** + * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH + * + * Enable support for RFC 6066 max_fragment_length extension in SSL. + * + * Comment this macro to disable support for the max_fragment_length extension + */ +#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH + +/** + * \def MBEDTLS_SSL_PROTO_SSL3 + * + * Enable support for SSL 3.0. + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for SSL 3.0 + */ +//#define MBEDTLS_SSL_PROTO_SSL3 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1 + * + * Enable support for TLS 1.0. + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for TLS 1.0 + */ +#define MBEDTLS_SSL_PROTO_TLS1 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1_1 + * + * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 + */ +#define MBEDTLS_SSL_PROTO_TLS1_1 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1_2 + * + * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). + * + * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C + * (Depends on ciphersuites) + * + * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 + */ +#define MBEDTLS_SSL_PROTO_TLS1_2 + +/** + * \def MBEDTLS_SSL_PROTO_DTLS + * + * Enable support for DTLS (all available versions). + * + * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, + * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1_1 + * or MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for DTLS + */ +#define MBEDTLS_SSL_PROTO_DTLS + +/** + * \def MBEDTLS_SSL_ALPN + * + * Enable support for RFC 7301 Application Layer Protocol Negotiation. + * + * Comment this macro to disable support for ALPN. + */ +#define MBEDTLS_SSL_ALPN + +/** + * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY + * + * Enable support for the anti-replay mechanism in DTLS. + * + * Requires: MBEDTLS_SSL_TLS_C + * MBEDTLS_SSL_PROTO_DTLS + * + * \warning Disabling this is often a security risk! + * See mbedtls_ssl_conf_dtls_anti_replay() for details. + * + * Comment this to disable anti-replay in DTLS. + */ +#define MBEDTLS_SSL_DTLS_ANTI_REPLAY + +/** + * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY + * + * Enable support for HelloVerifyRequest on DTLS servers. + * + * This feature is highly recommended to prevent DTLS servers being used as + * amplifiers in DoS attacks against other hosts. It should always be enabled + * unless you know for sure amplification cannot be a problem in the + * environment in which your server operates. + * + * \warning Disabling this can ba a security risk! (see above) + * + * Requires: MBEDTLS_SSL_PROTO_DTLS + * + * Comment this to disable support for HelloVerifyRequest. + */ +#define MBEDTLS_SSL_DTLS_HELLO_VERIFY + +/** + * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE + * + * Enable server-side support for clients that reconnect from the same port. + * + * Some clients unexpectedly close the connection and try to reconnect using the + * same source port. This needs special support from the server to handle the + * new connection securely, as described in section 4.2.8 of RFC 6347. This + * flag enables that support. + * + * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY + * + * Comment this to disable support for clients reusing the source port. + */ +#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE + +/** + * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT + * + * Enable support for a limit of records with bad MAC. + * + * See mbedtls_ssl_conf_dtls_badmac_limit(). + * + * Requires: MBEDTLS_SSL_PROTO_DTLS + */ +#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT + +/** + * \def MBEDTLS_SSL_SESSION_TICKETS + * + * Enable support for RFC 5077 session tickets in SSL. + * Client-side, provides full support for session tickets (maintenance of a + * session store remains the responsibility of the application, though). + * Server-side, you also need to provide callbacks for writing and parsing + * tickets, including authenticated encryption and key management. Example + * callbacks are provided by MBEDTLS_SSL_TICKET_C. + * + * Comment this macro to disable support for SSL session tickets + */ +#define MBEDTLS_SSL_SESSION_TICKETS + +/** + * \def MBEDTLS_SSL_EXPORT_KEYS + * + * Enable support for exporting key block and master secret. + * This is required for certain users of TLS, e.g. EAP-TLS. + * + * Comment this macro to disable support for key export + */ +#define MBEDTLS_SSL_EXPORT_KEYS + +/** + * \def MBEDTLS_SSL_SERVER_NAME_INDICATION + * + * Enable support for RFC 6066 server name indication (SNI) in SSL. + * + * Requires: MBEDTLS_X509_CRT_PARSE_C + * + * Comment this macro to disable support for server name indication in SSL + */ +#define MBEDTLS_SSL_SERVER_NAME_INDICATION + +/** + * \def MBEDTLS_SSL_TRUNCATED_HMAC + * + * Enable support for RFC 6066 truncated HMAC in SSL. + * + * Comment this macro to disable support for truncated HMAC in SSL + */ +#define MBEDTLS_SSL_TRUNCATED_HMAC + +/** + * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT + * + * Fallback to old (pre-2.7), non-conforming implementation of the truncated + * HMAC extension which also truncates the HMAC key. Note that this option is + * only meant for a transitory upgrade period and is likely to be removed in + * a future version of the library. + * + * \warning The old implementation is non-compliant and has a security weakness + * (2^80 brute force attack on the HMAC key used for a single, + * uninterrupted connection). This should only be enabled temporarily + * when (1) the use of truncated HMAC is essential in order to save + * bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use + * the fixed implementation yet (pre-2.7). + * + * \deprecated This option is deprecated and will likely be removed in a + * future version of Mbed TLS. + * + * Uncomment to fallback to old, non-compliant truncated HMAC implementation. + * + * Requires: MBEDTLS_SSL_TRUNCATED_HMAC + */ +//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT + +/** + * \def MBEDTLS_THREADING_ALT + * + * Provide your own alternate threading implementation. + * + * Requires: MBEDTLS_THREADING_C + * + * Uncomment this to allow your own alternate threading implementation. + */ +//#define MBEDTLS_THREADING_ALT + +/** + * \def MBEDTLS_THREADING_PTHREAD + * + * Enable the pthread wrapper layer for the threading layer. + * + * Requires: MBEDTLS_THREADING_C + * + * Uncomment this to enable pthread mutexes. + */ +//#define MBEDTLS_THREADING_PTHREAD + +/** + * \def MBEDTLS_USE_PSA_CRYPTO + * + * Make the X.509 and TLS library use PSA for cryptographic operations, see + * #MBEDTLS_PSA_CRYPTO_C. + * + * Note: this option is still in progress, the full X.509 and TLS modules are + * not covered yet, but parts that are not ported to PSA yet will still work + * as usual, so enabling this option should not break backwards compatibility. + * + * \warning Support for PSA is still an experimental feature. + * Any public API that depends on this option may change + * at any time until this warning is removed. + * + * Requires: MBEDTLS_PSA_CRYPTO_C. + */ +//#define MBEDTLS_USE_PSA_CRYPTO + +/** + * \def MBEDTLS_VERSION_FEATURES + * + * Allow run-time checking of compile-time enabled features. Thus allowing users + * to check at run-time if the library is for instance compiled with threading + * support via mbedtls_version_check_feature(). + * + * Requires: MBEDTLS_VERSION_C + * + * Comment this to disable run-time checking and save ROM space + */ +#define MBEDTLS_VERSION_FEATURES + +/** + * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an extension in a v1 or v2 certificate. + * + * Uncomment to prevent an error. + */ +//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 + +/** + * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an unknown critical extension. + * + * \warning Depending on your PKI use, enabling this can be a security risk! + * + * Uncomment to prevent an error. + */ +//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + +/** + * \def MBEDTLS_X509_CHECK_KEY_USAGE + * + * Enable verification of the keyUsage extension (CA and leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused + * (intermediate) CA and leaf certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip keyUsage checking for both CA and leaf certificates. + */ +#define MBEDTLS_X509_CHECK_KEY_USAGE + +/** + * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE + * + * Enable verification of the extendedKeyUsage extension (leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip extendedKeyUsage checking for certificates. + */ +#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE + +/** + * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT + * + * Enable parsing and verification of X.509 certificates, CRLs and CSRS + * signed with RSASSA-PSS (aka PKCS#1 v2.1). + * + * Comment this macro to disallow using RSASSA-PSS in certificates. + */ +#define MBEDTLS_X509_RSASSA_PSS_SUPPORT + +/** + * \def MBEDTLS_ZLIB_SUPPORT + * + * If set, the SSL/TLS module uses ZLIB to support compression and + * decompression of packet data. + * + * \warning TLS-level compression MAY REDUCE SECURITY! See for example the + * CRIME attack. Before enabling this option, you should examine with care if + * CRIME or similar exploits may be applicable to your use case. + * + * \note Currently compression can't be used with DTLS. + * + * \deprecated This feature is deprecated and will be removed + * in the next major revision of the library. + * + * Used in: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This feature requires zlib library and headers to be present. + * + * Uncomment to enable use of ZLIB + */ +//#define MBEDTLS_ZLIB_SUPPORT +/* \} name SECTION: mbed TLS feature support */ + +/** + * \name SECTION: mbed TLS modules + * + * This section enables or disables entire modules in mbed TLS + * \{ + */ + +/** + * \def MBEDTLS_AESNI_C + * + * Enable AES-NI support on x86-64. + * + * Module: library/aesni.c + * Caller: library/aes.c + * + * Requires: MBEDTLS_HAVE_ASM + * + * This modules adds support for the AES-NI instructions on x86-64 + */ +#define MBEDTLS_AESNI_C + +/** + * \def MBEDTLS_AES_C + * + * Enable the AES block cipher. + * + * Module: library/aes.c + * Caller: library/cipher.c + * library/pem.c + * library/ctr_drbg.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA + * + * PEM_PARSE uses AES for decrypting encrypted keys. + */ +#define MBEDTLS_AES_C + +/** + * \def MBEDTLS_ARC4_C + * + * Enable the ARCFOUR stream cipher. + * + * Module: library/arc4.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 + * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. If possible, we recommend avoidng dependencies on + * it, and considering stronger ciphers instead. + * + */ +#define MBEDTLS_ARC4_C + +/** + * \def MBEDTLS_ASN1_PARSE_C + * + * Enable the generic ASN1 parser. + * + * Module: library/asn1.c + * Caller: library/x509.c + * library/dhm.c + * library/pkcs12.c + * library/pkcs5.c + * library/pkparse.c + */ +#define MBEDTLS_ASN1_PARSE_C + +/** + * \def MBEDTLS_ASN1_WRITE_C + * + * Enable the generic ASN1 writer. + * + * Module: library/asn1write.c + * Caller: library/ecdsa.c + * library/pkwrite.c + * library/x509_create.c + * library/x509write_crt.c + * library/x509write_csr.c + */ +#define MBEDTLS_ASN1_WRITE_C + +/** + * \def MBEDTLS_BASE64_C + * + * Enable the Base64 module. + * + * Module: library/base64.c + * Caller: library/pem.c + * + * This module is required for PEM support (required by X.509). + */ +#define MBEDTLS_BASE64_C + +/** + * \def MBEDTLS_BIGNUM_C + * + * Enable the multi-precision integer library. + * + * Module: library/bignum.c + * Caller: library/dhm.c + * library/ecp.c + * library/ecdsa.c + * library/rsa.c + * library/rsa_internal.c + * library/ssl_tls.c + * + * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. + */ +#define MBEDTLS_BIGNUM_C + +/** + * \def MBEDTLS_BLOWFISH_C + * + * Enable the Blowfish block cipher. + * + * Module: library/blowfish.c + */ +#define MBEDTLS_BLOWFISH_C + +/** + * \def MBEDTLS_CAMELLIA_C + * + * Enable the Camellia block cipher. + * + * Module: library/camellia.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + */ +#define MBEDTLS_CAMELLIA_C + +/** + * \def MBEDTLS_ARIA_C + * + * Enable the ARIA block cipher. + * + * Module: library/aria.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * + * MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 + */ +//#define MBEDTLS_ARIA_C + +/** + * \def MBEDTLS_CCM_C + * + * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. + * + * Module: library/ccm.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C + * + * This module enables the AES-CCM ciphersuites, if other requisites are + * enabled as well. + */ +#define MBEDTLS_CCM_C + +/** + * \def MBEDTLS_CERTS_C + * + * Enable the test certificates. + * + * Module: library/certs.c + * Caller: + * + * This module is used for testing (ssl_client/server). + */ +#define MBEDTLS_CERTS_C + +/** + * \def MBEDTLS_CHACHA20_C + * + * Enable the ChaCha20 stream cipher. + * + * Module: library/chacha20.c + */ +#define MBEDTLS_CHACHA20_C + +/** + * \def MBEDTLS_CHACHAPOLY_C + * + * Enable the ChaCha20-Poly1305 AEAD algorithm. + * + * Module: library/chachapoly.c + * + * This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C + */ +#define MBEDTLS_CHACHAPOLY_C + +/** + * \def MBEDTLS_CIPHER_C + * + * Enable the generic cipher layer. + * + * Module: library/cipher.c + * Caller: library/ssl_tls.c + * + * Uncomment to enable generic cipher wrappers. + */ +#define MBEDTLS_CIPHER_C + +/** + * \def MBEDTLS_CMAC_C + * + * Enable the CMAC (Cipher-based Message Authentication Code) mode for block + * ciphers. + * + * Module: library/cmac.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C + * + */ +//#define MBEDTLS_CMAC_C + +/** + * \def MBEDTLS_CTR_DRBG_C + * + * Enable the CTR_DRBG AES-based random generator. + * The CTR_DRBG generator uses AES-256 by default. + * To use AES-128 instead, enable MBEDTLS_CTR_DRBG_USE_128_BIT_KEY below. + * + * Module: library/ctr_drbg.c + * Caller: + * + * Requires: MBEDTLS_AES_C + * + * This module provides the CTR_DRBG AES random number generator. + */ +#define MBEDTLS_CTR_DRBG_C + +/** + * \def MBEDTLS_DEBUG_C + * + * Enable the debug functions. + * + * Module: library/debug.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module provides debugging functions. + */ +#define MBEDTLS_DEBUG_C + +/** + * \def MBEDTLS_DES_C + * + * Enable the DES block cipher. + * + * Module: library/des.c + * Caller: library/pem.c + * library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA + * + * PEM_PARSE uses DES/3DES for decrypting encrypted keys. + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + */ +#define MBEDTLS_DES_C + +/** + * \def MBEDTLS_DHM_C + * + * Enable the Diffie-Hellman-Merkle module. + * + * Module: library/dhm.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * DHE-RSA, DHE-PSK + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_DHM_C + +/** + * \def MBEDTLS_ECDH_C + * + * Enable the elliptic curve Diffie-Hellman library. + * + * Module: library/ecdh.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK + * + * Requires: MBEDTLS_ECP_C + */ +#define MBEDTLS_ECDH_C + +/** + * \def MBEDTLS_ECDSA_C + * + * Enable the elliptic curve DSA library. + * + * Module: library/ecdsa.c + * Caller: + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA + * + * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C + */ +#define MBEDTLS_ECDSA_C + +/** + * \def MBEDTLS_ECJPAKE_C + * + * Enable the elliptic curve J-PAKE library. + * + * \warning This is currently experimental. EC J-PAKE support is based on the + * Thread v1.0.0 specification; incompatible changes to the specification + * might still happen. For this reason, this is disabled by default. + * + * Module: library/ecjpake.c + * Caller: + * + * This module is used by the following key exchanges: + * ECJPAKE + * + * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C + */ +//#define MBEDTLS_ECJPAKE_C + +/** + * \def MBEDTLS_ECP_C + * + * Enable the elliptic curve over GF(p) library. + * + * Module: library/ecp.c + * Caller: library/ecdh.c + * library/ecdsa.c + * library/ecjpake.c + * + * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED + */ +#define MBEDTLS_ECP_C + +/** + * \def MBEDTLS_ENTROPY_C + * + * Enable the platform-specific entropy code. + * + * Module: library/entropy.c + * Caller: + * + * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C + * + * This module provides a generic entropy pool + */ +#define MBEDTLS_ENTROPY_C + +/** + * \def MBEDTLS_ERROR_C + * + * Enable error code to error string conversion. + * + * Module: library/error.c + * Caller: + * + * This module enables mbedtls_strerror(). + */ +#define MBEDTLS_ERROR_C + +/** + * \def MBEDTLS_GCM_C + * + * Enable the Galois/Counter Mode (GCM) for AES. + * + * Module: library/gcm.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C + * + * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other + * requisites are enabled as well. + */ +#define MBEDTLS_GCM_C + +/** + * \def MBEDTLS_HAVEGE_C + * + * Enable the HAVEGE random generator. + * + * Warning: the HAVEGE random generator is not suitable for virtualized + * environments + * + * Warning: the HAVEGE random generator is dependent on timing and specific + * processor traits. It is therefore not advised to use HAVEGE as + * your applications primary random generator or primary entropy pool + * input. As a secondary input to your entropy pool, it IS able add + * the (limited) extra entropy it provides. + * + * Module: library/havege.c + * Caller: + * + * Requires: MBEDTLS_TIMING_C + * + * Uncomment to enable the HAVEGE random generator. + */ +//#define MBEDTLS_HAVEGE_C + +/** + * \def MBEDTLS_HKDF_C + * + * Enable the HKDF algorithm (RFC 5869). + * + * Module: library/hkdf.c + * Caller: + * + * Requires: MBEDTLS_MD_C + * + * This module adds support for the Hashed Message Authentication Code + * (HMAC)-based key derivation function (HKDF). + */ +#define MBEDTLS_HKDF_C + +/** + * \def MBEDTLS_HMAC_DRBG_C + * + * Enable the HMAC_DRBG random generator. + * + * Module: library/hmac_drbg.c + * Caller: + * + * Requires: MBEDTLS_MD_C + * + * Uncomment to enable the HMAC_DRBG random number geerator. + */ +#define MBEDTLS_HMAC_DRBG_C + +/** + * \def MBEDTLS_NIST_KW_C + * + * Enable the Key Wrapping mode for 128-bit block ciphers, + * as defined in NIST SP 800-38F. Only KW and KWP modes + * are supported. At the moment, only AES is approved by NIST. + * + * Module: library/nist_kw.c + * + * Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C + */ +//#define MBEDTLS_NIST_KW_C + +/** + * \def MBEDTLS_MD_C + * + * Enable the generic message digest layer. + * + * Module: library/md.c + * Caller: + * + * Uncomment to enable generic message digest wrappers. + */ +#define MBEDTLS_MD_C + +/** + * \def MBEDTLS_MD2_C + * + * Enable the MD2 hash algorithm. + * + * Module: library/md2.c + * Caller: + * + * Uncomment to enable support for (rare) MD2-signed X.509 certs. + * + * \warning MD2 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +//#define MBEDTLS_MD2_C + +/** + * \def MBEDTLS_MD4_C + * + * Enable the MD4 hash algorithm. + * + * Module: library/md4.c + * Caller: + * + * Uncomment to enable support for (rare) MD4-signed X.509 certs. + * + * \warning MD4 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +//#define MBEDTLS_MD4_C + +/** + * \def MBEDTLS_MD5_C + * + * Enable the MD5 hash algorithm. + * + * Module: library/md5.c + * Caller: library/md.c + * library/pem.c + * library/ssl_tls.c + * + * This module is required for SSL/TLS up to version 1.1, and for TLS 1.2 + * depending on the handshake parameters. Further, it is used for checking + * MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded + * encrypted keys. + * + * \warning MD5 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_MD5_C + +/** + * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C + * + * Enable the buffer allocator implementation that makes use of a (stack) + * based buffer to 'allocate' dynamic memory. (replaces calloc() and free() + * calls) + * + * Module: library/memory_buffer_alloc.c + * + * Requires: MBEDTLS_PLATFORM_C + * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) + * + * Enable this module to enable the buffer memory allocator. + */ +//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C + +/** + * \def MBEDTLS_NET_C + * + * Enable the TCP and UDP over IPv6/IPv4 networking routines. + * + * \note This module only works on POSIX/Unix (including Linux, BSD and OS X) + * and Windows. For other platforms, you'll want to disable it, and write your + * own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). + * + * \note See also our Knowledge Base article about porting to a new + * environment: + * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS + * + * Module: library/net_sockets.c + * + * This module provides networking routines. + */ +#define MBEDTLS_NET_C + +/** + * \def MBEDTLS_OID_C + * + * Enable the OID database. + * + * Module: library/oid.c + * Caller: library/asn1write.c + * library/pkcs5.c + * library/pkparse.c + * library/pkwrite.c + * library/rsa.c + * library/x509.c + * library/x509_create.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * This modules translates between OIDs and internal values. + */ +#define MBEDTLS_OID_C + +/** + * \def MBEDTLS_PADLOCK_C + * + * Enable VIA Padlock support on x86. + * + * Module: library/padlock.c + * Caller: library/aes.c + * + * Requires: MBEDTLS_HAVE_ASM + * + * This modules adds support for the VIA PadLock on x86. + */ +#define MBEDTLS_PADLOCK_C + +/** + * \def MBEDTLS_PEM_PARSE_C + * + * Enable PEM decoding / parsing. + * + * Module: library/pem.c + * Caller: library/dhm.c + * library/pkparse.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_BASE64_C + * + * This modules adds support for decoding / parsing PEM files. + */ +#define MBEDTLS_PEM_PARSE_C + +/** + * \def MBEDTLS_PEM_WRITE_C + * + * Enable PEM encoding / writing. + * + * Module: library/pem.c + * Caller: library/pkwrite.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * Requires: MBEDTLS_BASE64_C + * + * This modules adds support for encoding / writing PEM files. + */ +#define MBEDTLS_PEM_WRITE_C + +/** + * \def MBEDTLS_PK_C + * + * Enable the generic public (asymetric) key layer. + * + * Module: library/pk.c + * Caller: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C + * + * Uncomment to enable generic public key wrappers. + */ +#define MBEDTLS_PK_C + +/** + * \def MBEDTLS_PK_PARSE_C + * + * Enable the generic public (asymetric) key parser. + * + * Module: library/pkparse.c + * Caller: library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_PK_C + * + * Uncomment to enable generic public key parse functions. + */ +#define MBEDTLS_PK_PARSE_C + +/** + * \def MBEDTLS_PK_WRITE_C + * + * Enable the generic public (asymetric) key writer. + * + * Module: library/pkwrite.c + * Caller: library/x509write.c + * + * Requires: MBEDTLS_PK_C + * + * Uncomment to enable generic public key write functions. + */ +#define MBEDTLS_PK_WRITE_C + +/** + * \def MBEDTLS_PKCS5_C + * + * Enable PKCS#5 functions. + * + * Module: library/pkcs5.c + * + * Requires: MBEDTLS_MD_C + * + * This module adds support for the PKCS#5 functions. + */ +#define MBEDTLS_PKCS5_C + +/** + * \def MBEDTLS_PKCS11_C + * + * Enable wrapper for PKCS#11 smartcard support. + * + * Module: library/pkcs11.c + * Caller: library/pk.c + * + * Requires: MBEDTLS_PK_C + * + * This module enables SSL/TLS PKCS #11 smartcard support. + * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) + */ +//#define MBEDTLS_PKCS11_C + +/** + * \def MBEDTLS_PKCS12_C + * + * Enable PKCS#12 PBE functions. + * Adds algorithms for parsing PKCS#8 encrypted private keys + * + * Module: library/pkcs12.c + * Caller: library/pkparse.c + * + * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C + * Can use: MBEDTLS_ARC4_C + * + * This module enables PKCS#12 functions. + */ +#define MBEDTLS_PKCS12_C + +/** + * \def MBEDTLS_PLATFORM_C + * + * Enable the platform abstraction layer that allows you to re-assign + * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). + * + * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT + * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned + * above to be specified at runtime or compile time respectively. + * + * \note This abstraction layer must be enabled on Windows (including MSYS2) + * as other module rely on it for a fixed snprintf implementation. + * + * Module: library/platform.c + * Caller: Most other .c files + * + * This module enables abstraction of common (libc) functions. + */ +#define MBEDTLS_PLATFORM_C + +/** + * \def MBEDTLS_POLY1305_C + * + * Enable the Poly1305 MAC algorithm. + * + * Module: library/poly1305.c + * Caller: library/chachapoly.c + */ +#define MBEDTLS_POLY1305_C + +/** + * \def MBEDTLS_PSA_CRYPTO_C + * + * Enable the Platform Security Architecture cryptography API. + * + * \note This option only has an effect when the build option + * USE_CRYPTO_SUBMODULE is also in use. + * + * \warning This feature is experimental and available on an opt-in basis only. + * PSA APIs are subject to change at any time. The implementation comes with + * less assurance and support than the rest of Mbed TLS. + * + * Module: crypto/library/psa_crypto.c + * + * Requires: MBEDTLS_CTR_DRBG_C, MBEDTLS_ENTROPY_C + * + */ +//#define MBEDTLS_PSA_CRYPTO_C + +/** + * \def MBEDTLS_PSA_CRYPTO_STORAGE_C + * + * Enable the Platform Security Architecture persistent key storage. + * + * Module: library/psa_crypto_storage.c + * + * Requires: MBEDTLS_PSA_CRYPTO_C and one of either + * MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C or MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C + * (but not both) + * + */ +//#define MBEDTLS_PSA_CRYPTO_STORAGE_C + +/** + * \def MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C + * + * Enable persistent key storage over files for the + * Platform Security Architecture cryptography API. + * + * Module: library/psa_crypto_storage_file.c + * + * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_FS_IO + * + */ +//#define MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C + +/** + * \def MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C + * + * Enable persistent key storage over PSA ITS for the + * Platform Security Architecture cryptography API. + * + * Module: library/psa_crypto_storage_its.c + * + * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_PSA_HAS_ITS_IO + * + */ +//#define MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C + +/** + * \def MBEDTLS_RIPEMD160_C + * + * Enable the RIPEMD-160 hash algorithm. + * + * Module: library/ripemd160.c + * Caller: library/md.c + * + */ +#define MBEDTLS_RIPEMD160_C + +/** + * \def MBEDTLS_RSA_C + * + * Enable the RSA public-key cryptosystem. + * + * Module: library/rsa.c + * library/rsa_internal.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509.c + * + * This module is used by the following key exchanges: + * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK + * + * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C + */ +#define MBEDTLS_RSA_C + +/** + * \def MBEDTLS_SHA1_C + * + * Enable the SHA1 cryptographic hash algorithm. + * + * Module: library/sha1.c + * Caller: library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509write_crt.c + * + * This module is required for SSL/TLS up to version 1.1, for TLS 1.2 + * depending on the handshake parameters, and for SHA1-signed certificates. + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_SHA1_C + +/** + * \def MBEDTLS_SHA256_C + * + * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. + * + * Module: library/sha256.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module adds support for SHA-224 and SHA-256. + * This module is required for the SSL/TLS 1.2 PRF function. + */ +#define MBEDTLS_SHA256_C + +/** + * \def MBEDTLS_SHA512_C + * + * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. + * + * Module: library/sha512.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This module adds support for SHA-384 and SHA-512. + */ +#define MBEDTLS_SHA512_C + +/** + * \def MBEDTLS_SSL_CACHE_C + * + * Enable simple SSL cache implementation. + * + * Module: library/ssl_cache.c + * Caller: + * + * Requires: MBEDTLS_SSL_CACHE_C + */ +#define MBEDTLS_SSL_CACHE_C + +/** + * \def MBEDTLS_SSL_COOKIE_C + * + * Enable basic implementation of DTLS cookies for hello verification. + * + * Module: library/ssl_cookie.c + * Caller: + */ +#define MBEDTLS_SSL_COOKIE_C + +/** + * \def MBEDTLS_SSL_TICKET_C + * + * Enable an implementation of TLS server-side callbacks for session tickets. + * + * Module: library/ssl_ticket.c + * Caller: + * + * Requires: MBEDTLS_CIPHER_C + */ +#define MBEDTLS_SSL_TICKET_C + +/** + * \def MBEDTLS_SSL_CLI_C + * + * Enable the SSL/TLS client code. + * + * Module: library/ssl_cli.c + * Caller: + * + * Requires: MBEDTLS_SSL_TLS_C + * + * This module is required for SSL/TLS client support. + */ +#define MBEDTLS_SSL_CLI_C + +/** + * \def MBEDTLS_SSL_SRV_C + * + * Enable the SSL/TLS server code. + * + * Module: library/ssl_srv.c + * Caller: + * + * Requires: MBEDTLS_SSL_TLS_C + * + * This module is required for SSL/TLS server support. + */ +#define MBEDTLS_SSL_SRV_C + +/** + * \def MBEDTLS_SSL_TLS_C + * + * Enable the generic SSL/TLS code. + * + * Module: library/ssl_tls.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C + * and at least one of the MBEDTLS_SSL_PROTO_XXX defines + * + * This module is required for SSL/TLS. + */ +#define MBEDTLS_SSL_TLS_C + +/** + * \def MBEDTLS_THREADING_C + * + * Enable the threading abstraction layer. + * By default mbed TLS assumes it is used in a non-threaded environment or that + * contexts are not shared between threads. If you do intend to use contexts + * between threads, you will need to enable this layer to prevent race + * conditions. See also our Knowledge Base article about threading: + * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading + * + * Module: library/threading.c + * + * This allows different threading implementations (self-implemented or + * provided). + * + * You will have to enable either MBEDTLS_THREADING_ALT or + * MBEDTLS_THREADING_PTHREAD. + * + * Enable this layer to allow use of mutexes within mbed TLS + */ +//#define MBEDTLS_THREADING_C + +/** + * \def MBEDTLS_TIMING_C + * + * Enable the semi-portable timing interface. + * + * \note The provided implementation only works on POSIX/Unix (including Linux, + * BSD and OS X) and Windows. On other platforms, you can either disable that + * module and provide your own implementations of the callbacks needed by + * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide + * your own implementation of the whole module by setting + * \c MBEDTLS_TIMING_ALT in the current file. + * + * \note See also our Knowledge Base article about porting to a new + * environment: + * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS + * + * Module: library/timing.c + * Caller: library/havege.c + * + * This module is used by the HAVEGE random number generator. + */ +#define MBEDTLS_TIMING_C + +/** + * \def MBEDTLS_VERSION_C + * + * Enable run-time version information. + * + * Module: library/version.c + * + * This module provides run-time version information. + */ +#define MBEDTLS_VERSION_C + +/** + * \def MBEDTLS_X509_USE_C + * + * Enable X.509 core for using certificates. + * + * Module: library/x509.c + * Caller: library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, + * MBEDTLS_PK_PARSE_C + * + * This module is required for the X.509 parsing modules. + */ +#define MBEDTLS_X509_USE_C + +/** + * \def MBEDTLS_X509_CRT_PARSE_C + * + * Enable X.509 certificate parsing. + * + * Module: library/x509_crt.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is required for X.509 certificate parsing. + */ +#define MBEDTLS_X509_CRT_PARSE_C + +/** + * \def MBEDTLS_X509_CRL_PARSE_C + * + * Enable X.509 CRL parsing. + * + * Module: library/x509_crl.c + * Caller: library/x509_crt.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is required for X.509 CRL parsing. + */ +#define MBEDTLS_X509_CRL_PARSE_C + +/** + * \def MBEDTLS_X509_CSR_PARSE_C + * + * Enable X.509 Certificate Signing Request (CSR) parsing. + * + * Module: library/x509_csr.c + * Caller: library/x509_crt_write.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is used for reading X.509 certificate request. + */ +#define MBEDTLS_X509_CSR_PARSE_C + +/** + * \def MBEDTLS_X509_CREATE_C + * + * Enable X.509 core for creating certificates. + * + * Module: library/x509_create.c + * + * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C + * + * This module is the basis for creating X.509 certificates and CSRs. + */ +#define MBEDTLS_X509_CREATE_C + +/** + * \def MBEDTLS_X509_CRT_WRITE_C + * + * Enable creating X.509 certificates. + * + * Module: library/x509_crt_write.c + * + * Requires: MBEDTLS_X509_CREATE_C + * + * This module is required for X.509 certificate creation. + */ +#define MBEDTLS_X509_CRT_WRITE_C + +/** + * \def MBEDTLS_X509_CSR_WRITE_C + * + * Enable creating X.509 Certificate Signing Requests (CSR). + * + * Module: library/x509_csr_write.c + * + * Requires: MBEDTLS_X509_CREATE_C + * + * This module is required for X.509 certificate request writing. + */ +#define MBEDTLS_X509_CSR_WRITE_C + +/** + * \def MBEDTLS_XTEA_C + * + * Enable the XTEA block cipher. + * + * Module: library/xtea.c + * Caller: + */ +#define MBEDTLS_XTEA_C + +/* \} name SECTION: mbed TLS modules */ + +/** + * \name SECTION: Module configuration options + * + * This section allows for the setting of module specific sizes and + * configuration options. The default values are already present in the + * relevant header files and should suffice for the regular use cases. + * + * Our advice is to enable options and change their values here + * only if you have a good reason and know the consequences. + * + * Please check the respective header file for documentation on these + * parameters (to prevent duplicate documentation). + * \{ + */ + +/* MPI / BIGNUM options */ +//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ +//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ + +/* CTR_DRBG options */ +//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ +//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ +//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY /**< Use 128-bit key for CTR_DRBG - may reduce security (see ctr_drbg.h) */ + +/* HMAC_DRBG options */ +//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ + +/* ECP options */ +//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ +//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ +//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ + +/* Entropy options */ +//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ +//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ +//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */ + +/* Memory buffer allocator options */ +//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ + +/* Platform options */ +//#define MBEDTLS_PLATFORM_STD_MEM_HDR /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ +//#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ +/* Note: your snprintf must correctly zero-terminate the buffer! */ +//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */ + +/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ +/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ +//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */ +/* Note: your snprintf must correctly zero-terminate the buffer! */ +//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_VSNPRINTF_MACRO vsnprintf /**< Default vsnprintf macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ + +/** + * \brief This macro is invoked by the library when an invalid parameter + * is detected that is only checked with MBEDTLS_CHECK_PARAMS + * (see the documentation of that option for context). + * + * When you leave this undefined here, a default definition is + * provided that invokes the function mbedtls_param_failed(), + * which is declared in platform_util.h for the benefit of the + * library, but that you need to define in your application. + * + * When you define this here, this replaces the default + * definition in platform_util.h (which no longer declares the + * function mbedtls_param_failed()) and it is your responsibility + * to make sure this macro expands to something suitable (in + * particular, that all the necessary declarations are visible + * from within the library - you can ensure that by providing + * them in this file next to the macro definition). + * + * Note that you may define this macro to expand to nothing, in + * which case you don't have to worry about declarations or + * definitions. However, you will then be notified about invalid + * parameters only in non-void functions, and void function will + * just silently return early on invalid parameters, which + * partially negates the benefits of enabling + * #MBEDTLS_CHECK_PARAMS in the first place, so is discouraged. + * + * \param cond The expression that should evaluate to true, but doesn't. + */ +//#define MBEDTLS_PARAM_FAILED( cond ) assert( cond ) + +/* SSL Cache options */ +//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ +//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ + +/* SSL options */ + +/** \def MBEDTLS_SSL_MAX_CONTENT_LEN + * + * Maximum length (in bytes) of incoming and outgoing plaintext fragments. + * + * This determines the size of both the incoming and outgoing TLS I/O buffers + * in such a way that both are capable of holding the specified amount of + * plaintext data, regardless of the protection mechanism used. + * + * To configure incoming and outgoing I/O buffers separately, use + * #MBEDTLS_SSL_IN_CONTENT_LEN and #MBEDTLS_SSL_OUT_CONTENT_LEN, + * which overwrite the value set by this option. + * + * \note When using a value less than the default of 16KB on the client, it is + * recommended to use the Maximum Fragment Length (MFL) extension to + * inform the server about this limitation. On the server, there + * is no supported, standardized way of informing the client about + * restriction on the maximum size of incoming messages, and unless + * the limitation has been communicated by other means, it is recommended + * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN + * while keeping the default value of 16KB for the incoming buffer. + * + * Uncomment to set the maximum plaintext size of both + * incoming and outgoing I/O buffers. + */ +//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_IN_CONTENT_LEN + * + * Maximum length (in bytes) of incoming plaintext fragments. + * + * This determines the size of the incoming TLS I/O buffer in such a way + * that it is capable of holding the specified amount of plaintext data, + * regardless of the protection mechanism used. + * + * If this option is undefined, it inherits its value from + * #MBEDTLS_SSL_MAX_CONTENT_LEN. + * + * \note When using a value less than the default of 16KB on the client, it is + * recommended to use the Maximum Fragment Length (MFL) extension to + * inform the server about this limitation. On the server, there + * is no supported, standardized way of informing the client about + * restriction on the maximum size of incoming messages, and unless + * the limitation has been communicated by other means, it is recommended + * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN + * while keeping the default value of 16KB for the incoming buffer. + * + * Uncomment to set the maximum plaintext size of the incoming I/O buffer + * independently of the outgoing I/O buffer. + */ +//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_OUT_CONTENT_LEN + * + * Maximum length (in bytes) of outgoing plaintext fragments. + * + * This determines the size of the outgoing TLS I/O buffer in such a way + * that it is capable of holding the specified amount of plaintext data, + * regardless of the protection mechanism used. + * + * If this option undefined, it inherits its value from + * #MBEDTLS_SSL_MAX_CONTENT_LEN. + * + * It is possible to save RAM by setting a smaller outward buffer, while keeping + * the default inward 16384 byte buffer to conform to the TLS specification. + * + * The minimum required outward buffer size is determined by the handshake + * protocol's usage. Handshaking will fail if the outward buffer is too small. + * The specific size requirement depends on the configured ciphers and any + * certificate data which is sent during the handshake. + * + * Uncomment to set the maximum plaintext size of the outgoing I/O buffer + * independently of the incoming I/O buffer. + */ +//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING + * + * Maximum number of heap-allocated bytes for the purpose of + * DTLS handshake message reassembly and future message buffering. + * + * This should be at least 9/8 * MBEDTLSSL_IN_CONTENT_LEN + * to account for a reassembled handshake message of maximum size, + * together with its reassembly bitmap. + * + * A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default) + * should be sufficient for all practical situations as it allows + * to reassembly a large handshake message (such as a certificate) + * while buffering multiple smaller handshake messages. + * + */ +//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768 + +//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ +//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ +//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ + +/** + * Complete list of ciphersuites to use, in order of preference. + * + * \warning No dependency checking is done on that field! This option can only + * be used to restrict the set of available ciphersuites. It is your + * responsibility to make sure the needed modules are active. + * + * Use this to save a few hundred bytes of ROM (default ordering of all + * available ciphersuites) and a few to a few hundred bytes of RAM. + * + * The value below is only an example, not the default. + */ +//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + +/* X509 options */ +//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */ +//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */ + +/** + * Allow SHA-1 in the default TLS configuration for certificate signing. + * Without this build-time option, SHA-1 support must be activated explicitly + * through mbedtls_ssl_conf_cert_profile. Turning on this option is not + * recommended because of it is possible to generate SHA-1 collisions, however + * this may be safe for legacy infrastructure where additional controls apply. + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES + +/** + * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake + * signature and ciphersuite selection. Without this build-time option, SHA-1 + * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes. + * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by + * default. At the time of writing, there is no practical attack on the use + * of SHA-1 in handshake signatures, hence this option is turned on by default + * to preserve compatibility with existing peers, but the general + * warning applies nonetheless: + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE + +/** + * Uncomment the macro to let mbed TLS use your alternate implementation of + * mbedtls_platform_zeroize(). This replaces the default implementation in + * platform_util.c. + * + * mbedtls_platform_zeroize() is a widely used function across the library to + * zero a block of memory. The implementation is expected to be secure in the + * sense that it has been written to prevent the compiler from removing calls + * to mbedtls_platform_zeroize() as part of redundant code elimination + * optimizations. However, it is difficult to guarantee that calls to + * mbedtls_platform_zeroize() will not be optimized by the compiler as older + * versions of the C language standards do not provide a secure implementation + * of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to + * configure their own implementation of mbedtls_platform_zeroize(), for + * example by using directives specific to their compiler, features from newer + * C standards (e.g using memset_s() in C11) or calling a secure memset() from + * their system (e.g explicit_bzero() in BSD). + */ +//#define MBEDTLS_PLATFORM_ZEROIZE_ALT + +/** + * Uncomment the macro to let Mbed TLS use your alternate implementation of + * mbedtls_platform_gmtime_r(). This replaces the default implementation in + * platform_util.c. + * + * gmtime() is not a thread-safe function as defined in the C standard. The + * library will try to use safer implementations of this function, such as + * gmtime_r() when available. However, if Mbed TLS cannot identify the target + * system, the implementation of mbedtls_platform_gmtime_r() will default to + * using the standard gmtime(). In this case, calls from the library to + * gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex + * if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the + * library are also guarded with this mutex to avoid race conditions. However, + * if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will + * unconditionally use the implementation for mbedtls_platform_gmtime_r() + * supplied at compile time. + */ +//#define MBEDTLS_PLATFORM_GMTIME_R_ALT + +/* \} name SECTION: Customisation configuration options */ + +/* Target and application specific configurations + * + * Allow user to override any previous default. + * + */ +#if defined(MBEDTLS_USER_CONFIG_FILE) +#include MBEDTLS_USER_CONFIG_FILE +#endif + +#include "check_config.h" + +#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-mini-tls1_1.h b/configs/config-mini-tls1_1.h new file mode 100644 index 000000000..d4743bb22 --- /dev/null +++ b/configs/config-mini-tls1_1.h @@ -0,0 +1,75 @@ +/** + * \file config-mini-tls1_1.h + * + * \brief Minimal configuration for TLS 1.1 (RFC 4346) + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +/* + * Minimal configuration for TLS 1.1 (RFC 4346), implementing only the + * required ciphersuite: MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA + * + * See README.txt for usage instructions. + */ + +#ifndef MBEDTLS_CONFIG_H +#define MBEDTLS_CONFIG_H + +/* System support */ +#define MBEDTLS_HAVE_ASM +#define MBEDTLS_HAVE_TIME + +/* mbed TLS feature support */ +#define MBEDTLS_CIPHER_MODE_CBC +#define MBEDTLS_PKCS1_V15 +#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED +#define MBEDTLS_SSL_PROTO_TLS1_1 + +/* mbed TLS modules */ +#define MBEDTLS_AES_C +#define MBEDTLS_ASN1_PARSE_C +#define MBEDTLS_ASN1_WRITE_C +#define MBEDTLS_BIGNUM_C +#define MBEDTLS_CIPHER_C +#define MBEDTLS_CTR_DRBG_C +#define MBEDTLS_DES_C +#define MBEDTLS_ENTROPY_C +#define MBEDTLS_MD_C +#define MBEDTLS_MD5_C +#define MBEDTLS_NET_C +#define MBEDTLS_OID_C +#define MBEDTLS_PK_C +#define MBEDTLS_PK_PARSE_C +#define MBEDTLS_RSA_C +#define MBEDTLS_SHA1_C +#define MBEDTLS_SHA256_C +#define MBEDTLS_SSL_CLI_C +#define MBEDTLS_SSL_SRV_C +#define MBEDTLS_SSL_TLS_C +#define MBEDTLS_X509_CRT_PARSE_C +#define MBEDTLS_X509_USE_C + +/* For test certificates */ +#define MBEDTLS_BASE64_C +#define MBEDTLS_CERTS_C +#define MBEDTLS_PEM_PARSE_C + +#include "mbedtls/check_config.h" + +#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-thread.h b/configs/config-thread.h new file mode 100644 index 000000000..f729a0381 --- /dev/null +++ b/configs/config-thread.h @@ -0,0 +1,90 @@ +/** + * \file config-thread.h + * + * \brief Minimal configuration for using TLS as part of Thread + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +/* + * Minimal configuration for using TLS a part of Thread + * http://threadgroup.org/ + * + * Distinguishing features: + * - no RSA or classic DH, fully based on ECC + * - no X.509 + * - support for experimental EC J-PAKE key exchange + * + * See README.txt for usage instructions. + */ + +#ifndef MBEDTLS_CONFIG_H +#define MBEDTLS_CONFIG_H + +/* System support */ +#define MBEDTLS_HAVE_ASM + +/* mbed TLS feature support */ +#define MBEDTLS_AES_ROM_TABLES +#define MBEDTLS_ECP_DP_SECP256R1_ENABLED +#define MBEDTLS_ECP_NIST_OPTIM +#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED +#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH +#define MBEDTLS_SSL_PROTO_TLS1_2 +#define MBEDTLS_SSL_PROTO_DTLS +#define MBEDTLS_SSL_DTLS_ANTI_REPLAY +#define MBEDTLS_SSL_DTLS_HELLO_VERIFY +#define MBEDTLS_SSL_EXPORT_KEYS + +/* mbed TLS modules */ +#define MBEDTLS_AES_C +#define MBEDTLS_ASN1_PARSE_C +#define MBEDTLS_ASN1_WRITE_C +#define MBEDTLS_BIGNUM_C +#define MBEDTLS_CCM_C +#define MBEDTLS_CIPHER_C +#define MBEDTLS_CTR_DRBG_C +#define MBEDTLS_CMAC_C +#define MBEDTLS_ECJPAKE_C +#define MBEDTLS_ECP_C +#define MBEDTLS_ENTROPY_C +#define MBEDTLS_HMAC_DRBG_C +#define MBEDTLS_MD_C +#define MBEDTLS_OID_C +#define MBEDTLS_PK_C +#define MBEDTLS_PK_PARSE_C +#define MBEDTLS_SHA256_C +#define MBEDTLS_SSL_COOKIE_C +#define MBEDTLS_SSL_CLI_C +#define MBEDTLS_SSL_SRV_C +#define MBEDTLS_SSL_TLS_C + +/* Save RAM at the expense of ROM */ +#define MBEDTLS_AES_ROM_TABLES + +/* Save RAM by adjusting to our exact needs */ +#define MBEDTLS_ECP_MAX_BITS 256 +#define MBEDTLS_MPI_MAX_SIZE 32 // 256 bits is 32 bytes + +/* Save ROM and a few bytes of RAM by specifying our own ciphersuite list */ +#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 + +#include "mbedtls/check_config.h" + +#endif /* MBEDTLS_CONFIG_H */ diff --git a/tests/scripts/test-ref-configs.pl b/tests/scripts/test-ref-configs.pl index b29d0dd1b..3dea0046f 100755 --- a/tests/scripts/test-ref-configs.pl +++ b/tests/scripts/test-ref-configs.pl @@ -17,10 +17,18 @@ use warnings; use strict; my %configs = ( - 'config-symmetric-only.h' => { + 'config-default.h' => { + }, + 'config-mini-tls1_1.h' => { }, 'config-suite-b.h' => { }, + 'config-symmetric-only.h' => { + }, + 'config-ccm-psk-tls1_2.h' => { + }, + 'config-thread.h' => { + }, ); # If no config-name is provided, use all known configs.