Section 4.2.8 of RFC 6347 describes how to handle the case of a DTLS client
establishing a new connection using the same UDP quartet as an already active
connection, which we implement under the compile option
MBEDTLS_SSL_DLTS_CLIENT_PORT_REUSE. Relevant excerpts:
[the server] MUST NOT destroy the existing
association until the client has demonstrated reachability either by
completing a cookie exchange or by completing a complete handshake
including delivering a verifiable Finished message.
[...]
The reachability requirement prevents
off-path/blind attackers from destroying associations merely by
sending forged ClientHellos.
Our code chooses to use a cookie exchange for establishing reachability, but
unfortunately that check was effectively removed in a recent refactoring,
which changed what value ssl_handle_possible_reconnect() needs to return in
order for ssl_get_next_record() (introduced in that refactoring) to take the
proper action. Unfortunately, in addition to changing the value, the
refactoring also changed a return statement to an assignment to the ret
variable, causing the function to reach the code for a valid cookie, which
immediately destroys the existing association, effectively bypassing the
cookie verification.
This commit fixes that by immediately returning after sending a
HelloVerifyRequest when a ClientHello without a valid cookie is found. It also
updates the description of the function to reflect the new return value
convention (the refactoring updated the code but not the documentation).
The commit that changed the return value convention (and introduced the bug)
is 2fddd3765e, whose commit message explains the
change.
Note: this bug also indirectly caused the ssl-opt.sh test case "DTLS client
reconnect from same port: reconnect" to occasionally fail due to a race
condition between the reception of the ClientHello carrying a valid cookie and
the closure of the connection by the server after noticing the ClientHello
didn't carry a valid cookie after it incorrectly destroyed the previous
connection, that could cause that ClientHello to be invisible to the server
(if that message reaches the server just before it does `net_close()`). A
welcome side effect of this commit is to remove that race condition, as the
new connection will immediately start with a ClientHello carrying a valid
cookie in the SSL input buffer, so the server will not call `net_close()` and
not risk discarding a better ClientHello that arrived in the meantime.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
mbedtls.doxyfile - PROJECT_NAME - mbed TLS v2.16.6 chosen.
doc_mainpage.h - mbed TLS v2.16.6 version chosen.
hmac_drbg.h - line 260, extended description chosen.
- line 313, extended description chosen.
- line 338, extended description chosen.
version.h - 2.16.6 chosen.
CMakeLists.txt - 2.16.6 chosen.
test_suite_version.data - 2.16.6 chosen.
Makefile - 141 - manual correction - baremetal version of C_SOURCE_FILES
with variables for directories plus 2.16.6 CTAGS addition.
pkparse.c - lines 846 onwards - the asn1_get_nonzero_mpi implementation chosen.
ssl_tls.c - line 5269 - edited manually, left the ret=0, because baremetal has
a different behaviour since commit 87b5626, but added a debug
message that's new in 2.16.6.
all.sh:
- component_build_deprecated - chosen the refactored version from 2.16.6,
but with extra flags from baremetal.
- rest of the _no_xxx tests - merged make options to have PTHREAD=1 and
other changes from 2.16.6 (like -O1 instead of -O0).
- component_build_arm_none_eabi_gcc_no_64bit_multiplication - added
TINYCRYPT_BUILD=0 to the 2.16.6 version of make.
x509/req_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
x509/crl_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
x509/cert_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_mail_client.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_pthread_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_fork_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_client1.c - line 54 - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_client2.c - line 54 - left baremetal log but with mbedtls_exit( 0 ) call.
- line 132 - new options of both branches added.
- skip close notify handled as in 2.16.6, but with `ssl` instead of `&ssl`.
- Merged the 2.16.6 usage split with additional baremetal usages.
- Merged options from baremetal and 2.16.6.
ssl_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_server2.c - Merged the 2.16.6 usage split with additional baremetal usages.
config.pl - fixed missing defines from the documentation, removed duplicates,
and reorganised so that the documentation and excluded list
are ordered in the same way.
test_suite_x509parse.data - only added the two new pathlen tests.
x509_crt.c - change the return code by removing
MBEDTLS_ERR_X509_INVALID_EXTENSIONS, since it's added by
x509_crt_frame_parse_ext not by an "or", but by "+=".
Changelog - Assigned all entries to appropriate sections.
ssl-opt.sh - line 8263 - merged options.
- removed lines 1165 - 1176 - there was a duplicate test, probably
an artifact of previous merges.
check-files.py - sticked to old formatting.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The splitting of this test into two versions depending on whether SHA-1 was
allowed by the server was a mistake in
5d2511c4d4 - the test has nothing to do with
SHA-1 in the first place, as the server doesn't request a certificate from
the client so it doesn't matter if the server accepts SHA-1 or not.
While the whole script makes (often implicit) assumptions about the version of
GnuTLS used, generally speaking it should work out of the box with the version
packaged on our reference testing platform, which is Ubuntu 16.04 so far.
With the update from Jan 8 2020 (3.4.10-4ubuntu1.6), the patches for rejecting
SHA-1 in certificate signatures were backported, so we should avoid presenting
SHA-1 signed certificates to a GnuTLS peer in ssl-opt.sh.
Only add test when both are enforcing. This is configured in baremetal.h
and is checked in the check_cmdline_compat, would render other cases
with baremetal.h to skipped.
query_opt is used to read Mbed TLS configuration values instead of
config.pl script. Now MBEDTLS_SSL_MAX_CONTENT_LEN value is correctly
read and some tests needs to be removed from the test set when value
of MBEDTLS_SSL_MAX_CONTENT_LEN is too small for the test.
-Add comments to Makefiles about test env auto-detection
-Fix indentation
-Remove parent folder from include dirs
-Do not use environment variable for defining config file because
env variable usage is not fully implemented
-Revert changes to config.pl
This commit reimplements the helper functions
- requires_config_enabled
- requires_config_disabled
in ssl-opt.sh in terms of the programs/test/query_config
programs which allows to query the configuration in which
Mbed TLS was built.
This removes the dependency of ssl-opt.sh from the config
that was used to build the library.
* baremetal: (78 commits)
Review corrections 6
Review corrections 5
Minor changes to tinycrypt README
Typos in the tinycrypt README
Addition of copyright statements to tinycrypt files
Add LICENSE and README for tinycrypt
Add SPDX lines to each imported TinyCrypt file
Review corrections 4
Review corrections 3
Review corrections 2
Review corrections
Update signature of BE conversion functions
Use function for 16/24/32-bit BE conversion
x509.c: Minor readability improvement
x509_crt.c: Indicate guarding condition in #else branch
X.509: Don't remove verify callback by default
Fix Doxygen warnings regarding removed verify cb+ctx parameters
ECC restart: Use optional verification mode in bad signature test
Re-implement verify chain if vrfy cbs are disabled
Add zero-cost abstraction layer for CRT verification chain
...
* mbedtls-2.16: (28 commits)
Bump version to Mbed TLS 2.16.3
Changelog entry
Check for zero length and NULL buffer pointer
ssl-opt.sh: wait for proxy to start before running the script further
Fix uninitialized variable in x509_crt
HMAC DRBG: Split entropy-gathering requests to reduce request sizes
Fix the license header of hkdf
Add a change log entry
Add a test for mlaformed ECJPAKE context
Fix handling of md failure
Add a test for signing content with a long ECDSA key
Add documentation notes about the required size of the signature buffers
Add missing MBEDTLS_ECP_C dependencies in check_config.h
Change size of preallocated buffer for pk_sign() calls
Adapt ChangeLog
Fix mpi_bigendian_to_host() on bigendian systems
Add ChangeLog entry for new function
Add ChangeLog entry
Correct deterministic ECDSA behavior
Add warning for alternative ECDSA implementations
...
This commit modifies ssl-opt.sh to autodetect the use of test certificates
server5.* server6.* test-ca2.* using Secp384r1, and skips the corresponding
tests if MBEDTLS_ECP_DP_SECP384R1_ENABLED isn't set.
This commit splits each test in ssl-opt.sh related to context serialization
in three tests, exercising the use of CCM, GCM and ChaChaPoly separately.
The reason is that the choice of primitive affects the presence and size
of an explicit IV, and we should test that space for those IVs is correctly
restored during context deserialization; in fact, this was not the case
previously, as fixed in the last commit, and was not caught by the tests
because only ChaChaPoly was tested.
Now function mbedtls_ssl_set_hostname is compile-time configurable
in config.h with define MBEDTLS_X509_REMOVE_HOSTNAME_VERIFICATION.
This affects to many x509 API's. See config.h for details.
ssl_client2 and ssl_server2 either allow loading specific CRTs
and CAs from files, or to leave them unspecified, in which case
they're automatically picked from the test certificates.
The test certificates should be chosen in a way that when
not specifying any CRT or CA parameters, the automatically
chosen ones match - but if one of them is specified but not
the other, one should not expect tests to succeed.
With the recent switch to Secp256r1-based test certificates,
the default test certificates have changed, which breaks some
ssl-opt.sh tests which specify the server CRT explicitly but
not the client trusted CAs.
This commit fixes this by specifying the client's trusted CA
explicitly in accordance with the explicitly specified server CRT.
* mbedtls-2.16:
Fix parsing issue when int parameter is in base 16
Refactor receive_uint32()
Refactor get_byte function
Make the script portable to both pythons
Update the test encoding to support python3
update the test script
tests: Limit each log to 10 GiB
It happens regularly in test runs that the server example application
shuts down a connection, goes into waiting mode for a new connection,
and then receives the encrypted ClosureAlert from the client. The only
reason why this does currently not trigger the 'record from another epoch'
message is that we handle ClientHello parsing outside of the main record
stack because we want to be able to detect SSLv2 ClientHellos. However,
this is likely to go away, and once it happens, we'll see the log message.
Further, when record checking is used, every record, including the mentioned
closure alert, is passed to the record checking API before being passed to
the rest of the stack, which leads to the log message being printed.
In summary, grepping for 'record from another epoch' is a fragile way
of checking whether a reordered message has arrived. A more reliable
way is to grep for 'Buffer record from epoch' which is printed when
a record from a future epoch is actually buffered, and 'ssl_buffer_message'
which is the function buffering a future handshake message.
mbedtls_ssL_set_calc_verify_md() is used to select valid hashes when
writing the server's CertificateRequest message, as well as to verify
and act on the client's choice when reading its CertificateVerify
message.
If enabled at compile-time and configured via mbedtls_ssl_conf_sig_hashes()
the current code also offers SHA-1 in TLS 1.2. However, the SHA-1-based
handshake transcript in TLS 1.2 is different from the SHA-1 handshake
transcript used in TLS < 1.2, and we only maintain the latter
(through ssl_update_checksum_md5sha1()), but not the former.
Concretely, this will lead to CertificateVerify verification failure
if the client picks SHA-1 for the CertificateVerify message in a TLS 1.2
handshake.
This commit removes SHA-1 from the list of supported hashes in
the CertificateRequest message, and adapts two tests in ssl-opt.sh
which expect SHA-1 to be listed in the CertificateRequest message.
Limit log output in compat.sh and ssl-opt.sh, in case of failures with
these scripts where they may output seemingly unlimited length error
logs.
Note that ulimit -f uses units of 512 bytes, so we use 10 * 1024 * 1024
* 2 to get 10 GiB.
