None of the test cases in tests_suite_memory_buffer_alloc actually
need MBEDTLS_MEMORY_DEBUG. Some have additional checks when
MBEDTLS_MEMORY_DEBUG but all are useful even without it. So enable
them all and #ifdef out the parts that require DEBUG.
The test case "Memory buffer small buffer" emits a message
"FATAL: verification of first header failed". In this test case, it's
actually expected, but it looks weird to see this message from a
passing test. Add a comment that states this explicitly, and modify
the test description to indicate that the failure is expected, and
change the test function name to be more accurate.
Fix#309
The corner case tests were designed for 32 and 64 bit limbs
independently and performed only on the target platform. On the other
platform they are not corner cases anymore, but we can still exercise
them.
The corner case tests were designed for 64 bit limbs and failed on 32
bit platforms because the numbers in the test ended up being stored in a
different number of limbs and the function (correctly) returnd an error
upon receiving them.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
The former test-only function mbedtls_ctr_drbg_seed_entropy_len() is
no longer used, but keep it for strict ABI compatibility.
This commit first changes the return convention of EccPoint_mult_safer() so
that it properly reports when faults are detected. Then all functions that
call it need to be changed to (1) follow the same return convention and (2)
properly propagate UECC_FAULT_DETECTED when it occurs.
Here's the reverse call graph from EccPoint_mult_safer() to the rest of the
library (where return values are translated to the MBEDTLS_ERR_ space) and test
functions (where expected return values are asserted explicitly).
EccPoint_mult_safer()
EccPoint_compute_public_key()
uECC_compute_public_key()
pkparse.c
tests/suites/test_suite_pkparse.function
uECC_make_key_with_d()
uECC_make_key()
ssl_cli.c
ssl_srv.c
tests/suites/test_suite_pk.function
tests/suites/test_suite_tinycrypt.function
uECC_shared_secret()
ssl_tls.c
tests/suites/test_suite_tinycrypt.function
uECC_sign_with_k()
uECC_sign()
pk.c
tests/suites/test_suite_tinycrypt.function
Note: in uECC_sign_with_k() a test for uECC_vli_isZero(p) is suppressed
because it is redundant with a more thorough test (point validity) done at the
end of EccPoint_mult_safer(). This redundancy was introduced in a previous
commit but not noticed earlier.
This is a first step in protecting against fault injection attacks: the
attacker can no longer change failure into success by flipping a single bit.
Additional steps are needed to prevent other attacks (instruction skip etc)
and will be the object of future commits.
The return value of uECC_vli_equal() should be protected as well, which will
be done in a future commit as well.
* mbedtls-2.16: (25 commits)
Fix compilation error
Add const to variable
Fix endianity issue when reading uint32
Increase test suite timeout
Reduce stack usage of test_suite_pkcs1_v15
Reduce stack usage of test_suite_pkcs1_v21
Reduce stack usage of test_suite_rsa
Reduce stack usage of test_suite_pk
Enable MBEDTLS_MEMORY_DEBUG in memory buffer alloc test in all.sh
Remove unnecessary memory buffer alloc and memory backtrace unsets
Disable DTLS proxy tests for MEMORY_BUFFER_ALLOC test
all.sh: restructure memory allocator tests
Add missing dependency in memory buffer alloc set in all.sh
Don't set MBEDTLS_MEMORY_DEBUG through `scripts/config.pl full`
Add cfg dep MBEDTLS_MEMORY_DEBUG->MBEDTLS_MEMORY_BUFFER_ALLOC_C
Add all.sh run with full config and ASan enabled
Add all.sh run with MBEDTLS_MEMORY_BUFFER_ALLOC_C enabled
Update documentation of exceptions for `config.pl full`
Adapt all.sh to removal of buffer allocator from full config
Disable memory buffer allocator in full config
...
* origin/pr/2864:
Fix compilation error
Add const to variable
Fix endianity issue when reading uint32
Increase test suite timeout
Reduce stack usage of test_suite_pkcs1_v15
Reduce stack usage of test_suite_pkcs1_v21
Reduce stack usage of test_suite_rsa
Reduce stack usage of test_suite_pk
The uint32 is given as a bigendian stream, in the tests, however,
the char buffer that collected the stream read it as is,
without converting it. Add a temporary buffer, to call `greentea_getc()`
8 times, and then put it in the correct endianity for input to `unhexify()`.
Reduce the stack usage of the `test_suite_pkcs1_v21` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the size sent to the API to sizeof output.
Reduce the stack usage of the `test_suite_rsa` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the data size to decrypt in the data file.
In very reduced configurations, we don't want the overhead of maintaining a
bool just to remember if the context is valid and checking that bit at every
point of entry.
Note: so far this validity bit also served as a proxy to ensure that pk_ctx
was valid (currently this is a pointer to a dynamically-allocated buffer). In
the next series of commits, this will be changed to a statically-allocated
buffer, so there will be no question about its validity.
In the end (after this commit and the next series), a pk_context_t will be
(memory-wise) just the same as a mbedtls_uecc_keypair when SINGLE_TYPE is
enabled - meaning the PK layer will have zero memory overhead in that case.
This is the first in a series of commit aimed at removing the pk_info
structures when we're building with MBEDTLS_PK_SINGLE_TYPE enabled.
Introducing this abstraction allows us to later make it a two-valued type
(valid, invalid) instead, which is much lighter.
* baremetal: (78 commits)
Review corrections 6
Review corrections 5
Minor changes to tinycrypt README
Typos in the tinycrypt README
Addition of copyright statements to tinycrypt files
Add LICENSE and README for tinycrypt
Add SPDX lines to each imported TinyCrypt file
Review corrections 4
Review corrections 3
Review corrections 2
Review corrections
Update signature of BE conversion functions
Use function for 16/24/32-bit BE conversion
x509.c: Minor readability improvement
x509_crt.c: Indicate guarding condition in #else branch
X.509: Don't remove verify callback by default
Fix Doxygen warnings regarding removed verify cb+ctx parameters
ECC restart: Use optional verification mode in bad signature test
Re-implement verify chain if vrfy cbs are disabled
Add zero-cost abstraction layer for CRT verification chain
...
* mbedtls-2.16: (28 commits)
Bump version to Mbed TLS 2.16.3
Changelog entry
Check for zero length and NULL buffer pointer
ssl-opt.sh: wait for proxy to start before running the script further
Fix uninitialized variable in x509_crt
HMAC DRBG: Split entropy-gathering requests to reduce request sizes
Fix the license header of hkdf
Add a change log entry
Add a test for mlaformed ECJPAKE context
Fix handling of md failure
Add a test for signing content with a long ECDSA key
Add documentation notes about the required size of the signature buffers
Add missing MBEDTLS_ECP_C dependencies in check_config.h
Change size of preallocated buffer for pk_sign() calls
Adapt ChangeLog
Fix mpi_bigendian_to_host() on bigendian systems
Add ChangeLog entry for new function
Add ChangeLog entry
Correct deterministic ECDSA behavior
Add warning for alternative ECDSA implementations
...
With the removal of the MD handle from the MD context, it's a precondition
for any MD API outside of mbedtls_md_init() and mbedtls_md_setup() that
the MD context has been successfully setup by precisely those functions
beforehand, and hence must be bound to the single enabled valid MD handle.
