This is the most common mode and the only mode that Mbed TLS functions
fully supports (mbedtls_rsa_rsassa_pss_verify_ext can verify
signatures with a different salt length).
Explicitly state that calling abort is safe after initializing to
zero.
Explicitly state that calling abort on an inactive operation is safe,
and replace "active" by "initialized" in the description of the
parameter.
Get rid of the recommendation for implementers to try to handle
uninitialized structures safely. It's good advice in principle but
cannot be achieved in a robust way and the wording was confusing.
No common signature algorithm uses a salt (RSA-PKCS#1v1.5, RSA-PSS,
DSA, ECDSA, EdDSA). We don't even take an IV for MAC whereas MAC
algorithms with IV are uncommon but heard of. So remove the salt
parameter from psa_asymmetric_sign and psa_asymmetric_verify.
We failed check-names.sh due to using a define which wasn't described or
defined anywhere. Even though we won't realistically enable
MBEDTLS_PSA_CRYPTO_SPM via the configuration system (and will do it from
PSA Crypto SPM tooling instead), add a description of the configuration to
config.h as good practice. Exclude MBEDTLS_PSA_CRYPTO_SPM from the "full"
configuration as well.
Make function names for multipart operations more consistent (cipher
edition).
Rename symmetric cipher multipart operation functions so that they all
start with psa_cipher_:
* psa_encrypt_setup -> psa_cipher_encrypt_setup
* psa_decrypt_setup -> psa_cipher_decrypt_setup
* psa_encrypt_set_iv -> psa_cipher_set_iv
* psa_encrypt_generate_iv -> psa_cipher_generate_iv
Make function names for multipart operations more consistent (MAC
setup edition).
Split psa_mac_setup into two functions psa_mac_sign_setup and
psa_mac_verify_setup. These functions behave identically except that
they require different usage flags on the key. The goal of the split
is to enforce the key policy during setup rather than at the end of
the operation (which was a bit of a hack).
In psa_mac_sign_finish and psa_mac_verify_finish, if the operation is
of the wrong type, abort the operation before returning BAD_STATE.
This requires defining a maximum RSA key size, since the RSA key size
is the signature size. Enforce the maximum RSA key size when importing
or generating a key.
Macros such as PSA_HASH_SIZE whose definitions can be the same
everywhere except in implementations that support non-standard
algorithms remain in crypto.h, at least for the time being.
This header will contain macros that calculate buffer sizes, whose
semantics are standardized but whose definitions are
implementation-specific because they depend on the available algorithms
and on some permitted buffer size tolerances.
Move size macros from crypto_struct.h to crypto_sizes.h, because these
definitions need to be available both in the frontend and in the
backend, whereas structures have different contents.
Change the representation of an ECDSA signature from the ASN.1 DER
encoding used in TLS and X.509, to the concatenation of r and s
in big-endian order with a fixed size. A fixed size helps memory and
buffer management and this representation is generally easier to use
for anything that doesn't require the ASN.1 representation. This is
the same representation as PKCS#11 (Cryptoki) except that PKCS#11
allows r and s to be truncated (both to the same length), which
complicates the implementation and negates the advantage of a
fixed-size representation.
* Distinguish randomized ECDSA from deterministic ECDSA.
* Deterministic ECDSA needs to be parametrized by a hash.
* Randomized ECDSA only uses the hash for the initial hash step,
but add ECDSA(hash) algorithms anyway so that all the signature
algorithms encode the initial hashing step.
* Add brief documentation for the ECDSA signature mechanisms.
* Also define DSA signature mechanisms while I'm at it. There were
already key types for DSA.
* PSS needs to be parametrized by a hash.
* Don't use `_MGF1` in the names of macros for OAEP and PSS. No one
ever uses anything else.
* Add brief documentation for the RSA signature mechanisms.
Doxygen interprets `\param` as starting documentation for a new param, or
to extend a previously started `\param` documentation when the same
reference is used. The intention here was to reference the function
parameter, not extend the previous documentation. Use `\p` to refer to
function parameters.
It isn't used to define other macros and it doesn't seem that useful
for users. Remove it, we can reintroduce it if needed.
Define a similar function key_type_is_raw_bytes in the implementation
with a clear semantics: it's a key that's represented as a struct
raw_data.
When calling psa_generate_key, pass the size of the parameters buffer
explicitly. This makes calls more verbose but less error-prone. This
also has the benefit that in an implementation with separation, the
frontend knows how many bytes to send to the backend without needing
to know about each key type.
Switch the default config.h back to the upstream version, plus the new
feature from this branch MBEDTLS_PSA_CRYPTO_C, plus MBEDTLS_CMAC_C
because it's a features we're using to explore the API design but
that's off by default in Mbed TLS.
Having a crypto-only version saved a bit of developer time, and it's
something we want to ship, but we also need a full build with TLS to
work, and the CI scripts assume that the default build includes TLS.
As a consequence, list-macros.sh no longer needs a special case to
pass check-names.sh.
The default config.h omits non-crypto features. Remove some features
that had been accidentally left in but have dependencies that had been
removed.
Also update configs/config-psa-crypto.h to match
include/mbedtls/config.h. They were historically identical but started
diverging when the feature-psa branch was rebased on top of a more
recent upstream.
Now the code builds with the "full" config.
Instead of rolling our own list of elliptic curve identifiers, use one
from somewhere. Pick TLS because it's the right size (16 bits) and
it's as good as any.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
Previous commits attempted to use `gmtime_s()` for IAR systems; however,
this attempt depends on the use of C11 extensions which lead to incompatibility
with other pieces of the library, such as the use of `memset()` which is
being deprecated in favor of `memset_s()` in C11.
Conflicts:
library/psa_crypto.c
tests/suites/test_suite_psa_crypto.data
tests/suites/test_suite_psa_crypto.function
All the conflicts are concurrent additions where the order doesn't
matter. I put the code from feature-psa (key policy) before the code
from PR #13 (key lifetime).
psa_get_key_lifetime() behavior changed regarding empty slots, now
it return the lifetime of and empty slots. Documentation in header
file updated accordingly.
Conflict resolution:
* `tests/suites/test_suite_psa_crypto.data`: in the new tests from PR #14,
rename `PSA_ALG_RSA_PKCS1V15_RAW` to `PSA_ALG_RSA_PKCS1V15_SIGN_RAW` as
was done in PR #15 in the other branch.
When no algorithms are present in a category (e.g. no AEAD algorithm),
the union in the corresponding operation structure was empty, which is
not valid C. Add a dummy field to avoid this.
Document key import/export functions, hash functions, and asymmetric
sign/verify, as well as some related macros and types.
Nicer formatting for return values: use \retval.
New header file crypto_struct.h. The main file crypto.sh declares
structures which are implementation-defined. These structures must be
defined in crypto_struct.h, which is included at the end so that the
structures can use types defined in crypto.h.
Implement psa_hash_start, psa_hash_update and psa_hash_final. This
should work for all hash algorithms supported by Mbed TLS, but has
only been smoke-tested for SHA-256, and only in the nominal case.
Define psa_key_type_t and a first stab at a few values.
New functions psa_import_key, psa_export_key, psa_destroy_key,
psa_get_key_information. Implement them for raw data and RSA.
Under the hood, create an in-memory, fixed-size keystore with room
for MBEDTLS_PSA_KEY_SLOT_COUNT - 1 keys.
Add a new function mbedtls_rsa_get_bitlen which returns the RSA key
size, i.e. the bit size of the modulus. In the pk module, call
mbedtls_rsa_get_bitlen instead of mbedtls_rsa_get_len, which gave the
wrong result for key sizes that are not a multiple of 8.
This commit adds one non-regression test in the pk suite. More tests
are needed for RSA key sizes that are a multiple of 8.
This commit does not address RSA alternative implementations, which
only provide an interface that return the modulus size in bytes.
New module psa_crypto.c (MBEDTLS_PSA_CRYPTO_C):
Platform Security Architecture compatibility layer on top of
libmedcrypto.
Implement psa_crypto_init function which sets up a RNG.
Add a mbedtls_psa_crypto_free function which deinitializes the
library.
Define a first batch of error codes.
a compile time print was added warning in case of 128bit ctr_drbg keys.
This was don't to avoid an actual warning in these cases
(making build with warnings as errors possible).
Additional warnings on the Changelog/headers were set to use the same phrasing
phrasing was approved by Gilles and Janos.
the change is designed to make configuring 128bit keys for ctr_drbg more similar to other configuration options. Tests have been updated accordingly.
also clarified test naming.
This commit introduces a compile time constant MBEDTLS_SSL_DTLS_MAX_BUFFERING
to mbedtls/config.h which allows the user to control the cumulative size of
all heap buffer allocated for the purpose of reassembling and buffering
handshake messages.
It is put to use by introducing a new field `total_bytes_buffered` to
the buffering substructure of `mbedtls_ssl_handshake_params` that keeps
track of the total size of heap allocated buffers for the purpose of
reassembly and buffering at any time. It is increased whenever a handshake
message is buffered or prepared for reassembly, and decreased when a
buffered or fully reassembled message is copied into the input buffer
and passed to the handshake logic layer.
This commit does not yet include future epoch record buffering into
account; this will be done in a subsequent commit.
Also, it is now conceivable that the reassembly of the next expected
handshake message fails because too much buffering space has already
been used up for future messages. This case currently leads to an
error, but instead, the stack should get rid of buffered messages
to be able to buffer the next one. This will need to be implemented
in one of the next commits.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
This commit implements the buffering of a record from the next epoch.
- The buffering substructure of mbedtls_ssl_handshake_params
gets another field to hold a raw record (incl. header) from
a future epoch.
- If ssl_parse_record_header() sees a record from the next epoch,
it signals that it might be suitable for buffering by returning
MBEDTLS_ERR_SSL_EARLY_MESSAGE.
- If ssl_get_next_record() finds this error code, it passes control
to ssl_buffer_future_record() which may or may not decide to buffer
the record; it does so if
- a handshake is in progress,
- the record is a handshake record
- no record has already been buffered.
If these conditions are met, the record is backed up in the
aforementioned buffering substructure.
- If the current datagram is fully processed, ssl_load_buffered_record()
is called to check if a record has been buffered, and if yes,
if by now the its epoch is the current one; if yes, it copies
the record into the (empty! otherwise, ssl_load_buffered_record()
wouldn't have been called) input buffer.
This commit returns the error code MBEDTLS_ERR_SSL_EARLY_MESSAGE
for proper handshake fragments, forwarding their treatment to
the buffering function ssl_buffer_message(); currently, though,
this function does not yet buffer or reassembly HS messages, so:
! This commit temporarily disables support for handshake reassembly !
This commit introduces, but does not yet put to use, a sub-structure
of mbedtls_ssl_handshake_params::buffering that will be used for the
buffering and/or reassembly of handshake messages with handshake
sequence numbers that are greater or equal to the next expected
sequence number.
This commit introduces a sub-structure `buffering` within
mbedtls_ssl_handshake_params that shall contain all data
related to the reassembly and/or buffering of handshake
messages.
Currently, only buffering of CCS messages is implemented,
so the only member of this struct is the previously introduced
`seen_ccs` field.
This commit implements support for remembering out-of-order
CCS messages. Specifically, a flag is set whenever a CCS message
is read which remains until the end of a flight, and when a
CCS message is expected and a CCS message has been seen in the
current flight, a synthesized CCS record is created.
This function was previously global because it was
used directly within ssl_parse_certificate_verify()
in library/ssl_srv.c. The previous commit removed
this dependency, replacing the call by a call to
the global parent function mbedtls_ssl_read_record().
This renders mbedtls_ssl_read_record_layer() internal
and therefore allows to make it static, and accordingly
rename it as ssl_read_record_layer().
Previously, mbedtls_ssl_read_record() always updated the handshake
checksum in case a handshake record was received. While desirable
most of the time, for the CertificateVerify message the checksum
update must only happen after the message has been fully processed,
because the validation requires the handshake digest up to but
excluding the CertificateVerify itself. As a remedy, the bulk
of mbedtls_ssl_read_record() was previously duplicated within
ssl_parse_certificate_verify(), hardening maintenance in case
mbedtls_ssl_read_record() is subject to changes.
This commit adds a boolean parameter to mbedtls_ssl_read_record()
indicating whether the checksum should be updated in case of a
handshake message or not. This allows using it also for
ssl_parse_certificate_verify(), manually updating the checksum
after the message has been processed.
This commit adds a public function
`mbedtls_ssl_conf_datagram_packing()`
that allows to allow / forbid the packing of multiple
records within a single datagram.
This commit finally enables datagram packing by modifying the
record preparation function ssl_write_record() to not always
calling mbedtls_ssl_flush_output().
This commit is another step towards supporting the packing of
multiple records within a single datagram.
Previously, the incremental outgoing record sequence number was
statically stored within the record buffer, at its final place
within the record header. This slightly increased efficiency
as it was not necessary to copy the sequence number when writing
outgoing records.
When allowing multiple records within a single datagram, it is
necessary to allow the position of the current record within the
datagram buffer to be flexible; in particular, there is no static
address for the record sequence number field within the record header.
This commit introduces an additional field `cur_out_ctr` within
the main SSL context structure `mbedtls_ssl_context` to keep track
of the outgoing record sequence number independent of the buffer used
for the current record / datagram. Whenever a new record is written,
this sequence number is copied to the the address `out_ctr` of the
sequence number header field within the current outgoing record.
This will allow fragmentation to always happen in the same place, always from
a buffer distinct from ssl->out_msg, and with the same way of resuming after
returning WANT_WRITE
The standard HKDF security guarantees only hold if `mbedtls_hkdf()` is
used or if `mbedtls_hkdf_extract()` and `mbedtls_hkdf_expand()` are
called in succession carefully and an equivalent way.
Making `mbedtls_hkdf_extract()` and `mbedtls_hkdf_expand()` static would
prevent any misuse, but doing so would require the TLS 1.3 stack to
break abstraction and bypass the module API.
To reduce the risk of misuse we add warnings to the function
descriptions.
When MBEDTLS_ARC4_C and MBEDTLS_CIPHER_NULL_CIPHER were disabled, the stream
cipher function wasn't being include in the cipher struct, yet Chacha20 requires
it.
The purpose of the networking module can sometimes be misunderstood. This adds
a definition and explanation of what the networking module is and what it can be
used for.
We don't compile in the assembly code if compiler optimisations are disabled as
the number of registers used in the assembly code doesn't work with the -O0
option. Also anyone select -O0 probably doesn't want to compile in the assembly
code anyway.
Fix Documentation error in `mbedtls_ssl_get_session`.
This function supports deep copying of the session,
and the peer certificate is not lost anymore, Resolves#926
Move definition of `MBEDTLS_CIPHER_MODE_STREAM` to header file
(`mbedtls_cipher_internal.h`), because it is used by more than
one file. Raised by TrinityTonic in #1719
This fix adds the ebx register to the clobber list for the i386 inline assembly
for the multiply helper function.
ebx was used but not listed, so when the compiler chose to also use it, ebx was
getting corrupted. I'm surprised this wasn't spotted sooner.
Fixes Github issues #1550.
This patch modifies the documentation for mbedtls_ssl_write() to allow
0 as a valid return value as this is the correct number of bytes that
should be returned when an empty TLS Application record is sent.
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
The TLS layer is checking for mode, such as GCM, CCM, CBC, STREAM. ChachaPoly
needs to have its own mode, even if it's used just one cipher, in order to
allow consistent handling of mode in the TLS layer.
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
For the situation where the mbedTLS device has limited RAM, but the
other end of the connection doesn't support the max_fragment_length
extension. To be spec-compliant, mbedTLS has to keep a 16384 byte
incoming buffer. However the outgoing buffer can be made smaller without
breaking spec compliance, and we save some RAM.
See comments in include/mbedtls/config.h for some more details.
(The lower limit of outgoing buffer size is the buffer size used during
handshake/cert negotiation. As the handshake is half-duplex it might
even be possible to store this data in the "incoming" buffer during the
handshake, which would save even more RAM - but it would also be a lot
hackier and error-prone. I didn't really explore this possibility, but
thought I'd mention it here in case someone sees this later on a mission
to jam mbedTLS into an even tinier RAM footprint.)
The XTS configuration option MBEDTLS_CIPHER_MODE_XTS currently only enables
XTS for AES. So, don't say it enables XTS for "symmetric ciphers", just
AES. This helps to avoid being misleading.
mbedtls_aes_crypt_xts() currently takes a `bits_length` parameter, unlike
the other block modes. Change the parameter to accept a bytes length
instead, as the `bits_length` parameter is not actually ever used in the
current implementation.
Add a new context structure for XTS. Adjust the API for XTS to use the new
context structure, including tests suites and the benchmark program. Update
Doxgen documentation accordingly.
AES-XEX is a building block for other cryptographic standards and not yet a
standard in and of itself. We'll just provide the standardized AES-XTS
algorithm, and not AES-XEX. The AES-XTS algorithm and interface provided
can be used to perform the AES-XEX algorithm when the length of the input
is a multiple of the AES block size.
XTS mode is fully known as "xor-encrypt-xor with ciphertext-stealing".
This is the generalization of the XEX mode.
This implementation is limited to an 8-bits (1 byte) boundary, which
doesn't seem to be what was thought considering some test vectors [1].
This commit comes with tests, extracted from [1], and benchmarks.
Although, benchmarks aren't really nice here, as they work with a buffer
of a multiple of 16 bytes, which isn't a challenge for XTS compared to
XEX.
[1] http://csrc.nist.gov/groups/STM/cavp/documents/aes/XTSTestVectors.zip
XEX mode, known as "xor-encrypt-xor", is the simple case of the XTS
mode, known as "XEX with ciphertext stealing". When the buffers to be
encrypted/decrypted have a length divisible by the length of a standard
AES block (16), XTS is exactly like XEX.
It's undesirable to have users of the SSL layer check for an error code
specific to a lower-level layer, both out of general layering principles, and
also because if we later make another crypto module gain resume capabilities,
we would need to change the contract again (checking for a new module-specific
error code).
When MBEDTLS_PLATFORM_MEMORY is defined but MBEDTLS_PLATFORM_FREE_MACRO or
MBEDTLS_PLATFORM_CALLOC_MACRO are not defined then the actual functions
used to allocate and free memory are stored in function pointers.
These pointers are exposed to the caller, and it means that the caller
and the library have to share a data section.
In TF-A, we execute in a very constrained environment, where some images
are executed from ROM and other images are executed from SRAM. The
images that are executed from ROM cannot be modified. The SRAM size
is very small and we are moving libraries to the ROM that can be shared
between the different SRAM images. These SRAM images could import all the
symbols used in mbedtls, but it would create an undesirable hard binary
dependency between the different images. For this reason, all the library
functions in ROM are accesed using a jump table whose base address is
known, allowing the images to execute with different versions of the ROM.
This commit changes the function pointers to actual functions,
so that the SRAM images only have to use the new exported symbols
(mbedtls_calloc and mbedtls_free) using the jump table. In
our scenario, mbedtls_platform_set_calloc_free is called from
mbedtls_memory_buffer_alloc_init which initializes the function pointers
to the internal buffer_alloc_calloc and buffer_alloc_free functions.
No functional changes to mbedtls_memory_buffer_alloc_init.
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
