The code wants timer callbacks to be set (checked in fetch_input()), and can't
easily check whether we're using nbio, so it seems easier to require the
callbacks to be always set rather than only with nbio as was previously done.
The number of meaning of the flags will be determined later, when handling the
relevant struct members. For now three bytes are reserved as an example, but
this number may change later.
Enforce restrictions indicated in the documentation.
This allows to make some simplifying assumptions (no need to worry about
saving IVs for CBC in TLS < 1.1, nor about saving handshake data) and
guarantees that all values marked as "forced" in the design document have the
intended values and can be skipped when serialising.
Some of the "forced" values are not checked because their value is a
consequence of other checks (for example, session_negotiated == NULL outside
handshakes). We do however check that session and transform are not NULL (even
if that's also a consequence of the initial handshake being over) as we're
going to dereference them and static analyzers may appreciate the info.
This commit introduces the option MBEDTLS_SSL_CONF_SINGLE_HASH
which can be used to register a single supported signature hash
algorithm at compile time. It replaces the runtime configuration
API mbedtls_ssl_conf_sig_hashes() which allows to register a _list_
of supported signature hash algorithms.
In contrast to other options used to hardcode configuration options,
MBEDTLS_SSL_CONF_SINGLE_HASH isn't a numeric option, but instead it's
only relevant if it's defined or not. To actually set the single
supported hash algorithm that should be supported, numeric options
MBEDTLS_SSL_CONF_SINGLE_HASH_TLS_ID
MBEDTLS_SSL_CONF_SINGLE_HASH_MD_ID
must both be defined and provide the TLS ID and the Mbed TLS internal
ID and the chosen hash algorithm, respectively.
This commit introduces the option MBEDTLS_SSL_CONF_SINGLE_EC
which can be used to register a single supported elliptic curve
at compile time. It replaces the runtime configuration API
mbedtls_ssl_conf_curves() which allows to register a _list_
of supported elliptic curves.
In contrast to other options used to hardcode configuration options,
MBEDTLS_SSL_CONF_SINGLE_EC isn't a numeric option, but instead it's
only relevant if it's defined or not. To actually set the single
elliptic curve that should be supported, numeric options
MBEDTLS_SSL_CONF_SINGLE_EC_TLS_ID
MBEDTLS_SSL_CONF_SINGLE_EC_GRP_ID
must both be defined and provide the TLS ID and the Mbed TLS internal
ID and the chosen curve, respectively.
The fields
- mbedtls_ssl_handshake_params::max_major_ver,
- mbedtls_ssl_handshake_params::max_minor_ver
are used only for server-side RSA-based key exchanges
can be removed otherwise.
Reasons:
- If the transport type is fixed at compile-time,
mbedtls_ssl_read_version() and mbedtls_ssl_write_version()
are called with a compile-time determined `transport`
parameter, so the transport-type branch in their body
can be eliminated at compile-time.
- mbedtls_ssl_read_version() is called with addresses of
local variables, which so far need to be put on the stack
to be addressable. Inlining the call allows to read directly
into the registers holding these local variables.
This saves 60 bytes w.r.t. the measurement performed by
> ./scripts/baremetal.sh --rom --gcc
If the minor/major version is enforced at compile-time, the `major_ver`
and `minor_ver` fields in `mbedtls_ssl_context` are redundant and can
be removed.
This commit introduces the numeric compile-time constants
- MBEDTLS_SSL_CONF_MIN_MINOR_VER
- MBEDTLS_SSL_CONF_MAX_MINOR_VER
- MBEDTLS_SSL_CONF_MIN_MAJOR_VER
- MBEDTLS_SSL_CONF_MAX_MAJOR_VER
which, when defined, overwrite the runtime configurable fields
mbedtls_ssl_config::min_major_ver etc. in the SSL configuration.
As for the preceding case of the ExtendedMasterSecret configuration,
it also introduces and puts to use getter functions for these variables
which evaluate to either a field access or the macro value, maintaining
readability of the code.
The runtime configuration API mbedtls_ssl_conf_{min|max}_version()
is kept for now but has no effect if MBEDTLS_SSL_CONF_XXX are set.
This is likely to be changed in a later commit but deliberately omitted
for now, in order to be able to study code-size benefits earlier in the
process.
This commit restructures ssl_ciphersuites.h and ssl_ciphersuites.c to
define all ciphersuite helper functions static inline in ssl_ciphersuites.h
if MBEDTLS_SSL_CONF_SINGLE_CIPHERSUITE is set, and to otherwise put their
definitions in ssl_ciphersuites.c.
If MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled, the type
mbedtls_ssl_ciphersuite_handle_t
is logically a boolean (concretely realized as `unsigned char`),
containing the invalid handle and the unique valid handle, which
represents the single enabled ciphersuite.
The SSL session structure mbedtls_ssl_session contains an instance
of mbedtls_ssl_ciphersuite_handle_t which is guaranteed to be valid,
and which is hence redundant in any two-valued implementation of
mbedtls_ssl_ciphersuite_handle_t.
This commit replaces read-uses of
mbedtls_ssl_session::ciphersuite_info
by a getter functions which, and defines this getter function
either by just reading the field from the session structure
(in case MBEDTLS_SSL_SINGLE_CIPHERSUITE is disabled), or by
returning the single valid ciphersuite handle (in case
MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled) and removing the
field from mbedtls_ssl_session in this case.
If MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled, it overwrites
the runtime configuration of supported ciphersuites, which
includes both the configuration API and the fields which are
used to store the configuration. Both are therefore no longer
needed and should be removed for the benefit of code-size,
memory usage, and API clarity (no accidental hiccup of runtime
vs. compile-time configuration possible).
The configuration API mbedtls_ssl_conf_ciphersuites() has
already been removed in case MBEDTLS_SSL_SINGLE_CIPHERSUITE,
and this commit removes the field
mbedtls_ssl_config::ciphersuite_list
which it updates.
If MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled, the type
mbedtls_ssl_ciphersuite_handle_t
is logically a boolean (concretely realized as `unsigned char`),
containing the invalid handle and the unique valid handle, which
represents the single enabled ciphersuite.
The SSL handshake structure mbedtls_ssl_handshake_params contains
an instance of mbedtls_ssl_ciphersuite_handle_t which is guaranteed
to be valid, and which is hence redundant in any two-valued
implementation of mbedtls_ssl_ciphersuite_handle_t.
This commit replaces read-uses of
mbedtls_ssl_handshake_params::ciphersuite_info
by a getter functions which, and defines this getter function
either by just reading the field from the handshake structure
(in case MBEDTLS_SSL_SINGLE_CIPHERSUITE is disabled), or by
returning the single valid ciphersuite handle (in case
MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled) and removing the
field from mbedtls_ssl_handshake_params in this case.
This commit modifies the ClientHello writing routine ssl_write_client_hello
in ssl_cli.c to switch between
(a) listing all runtime configured ciphersuites
(in case MBEDTLS_SSL_SINGLE_CIPHERSUITE is not defined)
(b) listing just the single hardcoded ciphersuite
(in case MBEDTLS_SSL_SINGLE_CIPHERSUITE is defined)
The approach taken is to introduce a pair of helper macros
MBEDTLS_SSL_BEGIN_FOR_EACH_CIPHERSUITE( ssl, ver, info )
MBEDTLS_SSL_END_FOR_EACH_CIPHERSUITE
which when delimiting a block of code lead to that block of
code being run once for each ciphersuite that's enabled in the
context `ssl` and version `ver`, referenced through the (fresh)
`info` variable. Internally, this is implemented either through
a plain `for` loop traversing the runtime configured ciphersuite
list (if MBEDTLS_SSL_SINGLE_CIPHERSUITE is disabled) or by just
hardcoding `info` to the single enabled ciphersuite (if
MBEDTLS_SSL_SINGLE_CIPHERSUITE is enabled).
These helper macros will prove useful whereever previous code
traversed the runtime configured ciphersuite list, but adaptations
of those occasions outside ClientHello writing are left for later
commits.
This commit is a step towards the goal of allowing to hardcode the choice
of a single ciphersuite at compile-time. The hoped for benefit of this is
that whereever a ciphersuite attribute is queried and checked against a
compile-time constant, the check can be recognized as either true or false
at compile-time, hence leading to a code-size reduction.
For this to work, the ciphersuite attribute getter functions
mbedtls_ssl_suite_get_xxx() will be modified to return something
the compiler can recognize as a compile-time constant. In particular,
in order to avoid relying on constant propagation abilities of the
compiler, these functions should ideally return constant symbols
(instead of, say, fields in a globally const structure instance).
This puts us in the following situation: On the one hand, there's the
array of ciphersuite information structures defining the attribute of
those ciphersuites the stack knows about. On the other hand, we need
direct access to those fields through constant symbols in the getter
functions.
In order to avoid any duplication of information, this commit exemplifies
how ciphersuites can be conveniently defined on the basis of macro
definitions, and how the corresponding instances of the ciphersuite
information structure can be auto-generated from this.
In the approach, to add support for a ciphersuite with official name
NAME (such as TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8), the following macro
constants need to be defined in ssl_ciphersuites.h:
MBEDTLS_SUITE__ NAME __ID
MBEDTLS_SUITE__ NAME __NAME
MBEDTLS_SUITE__ NAME __CIPHER
MBEDTLS_SUITE__ NAME __MAC
...
To make check-names.sh happy, one also needs a dummy macro
MBEDTLS_SUITE__ NAME()
These ciphersuite attribute values can then be queried via
MBEDTLS_SSL_SUITE_ID( NAME_MACRO )
...
where NAME_MACRO can be any macro expanding to a defined NAME.
Further, a convenience macro
MBEDTLS_SSL_SUITE_INFO( NAME_MACRO )
is provided that again takes a macro NAME_MACRO expanding to a
defined NAME, and itself expands to an instance of
mbedtls_ssl_ciphersuite_info_t using the macro attributes
defined for NAME. This macro is then used in ssl_ciphersuites.c
when defining the array of known ciphersuite information structures,
(a) without duplicating the information, and (b) with increased
readability, because there's only one line for each ciphersuite.
This commit introduces an internal zero-cost abstraction layer for
SSL ciphersuites: Instead of addressing ciphersuites via pointers
to instances of mbedtls_ssl_ciphersuite_t and accessing their fields
directly, this commit introduces an opaque type
mbedtls_ssl_ciphersuite_handle_t,
and getter functions
mbedtls_ssl_suite_get_xxx()
operating on ciphersuite handles.
The role of NULL is played by a new macro constant
MBEDTLS_SSL_CIPHERSUITE_INVALID_HANDLE
which results of functions returning handles can be checked against.
(For example, when doing a lookup of a ciphersuite from a peer-provided
ciphersuite ID in the per's Hello message).
The getter functions have the validity of the handle as a precondition
and are undefined if the handle is invalid.
So far, there's only one implementation of this abstraction layer, namely
mbedtls_ssl_ciphersuite_handle_t being mbedtls_ssl_ciphersuite_t const *
and
getter functions being field accesses.
In subsequent commits, however, the abstraction layer will be useful
to save code in the situation where only a single ciphersuite is enabled.
Previously, ssl.h included ssl_ciphersuites.h to have access to the
helper macros MBEDTLS_KEY_EXCHANGE_XXX_ENABLED, and for no other
reason. This commit moves the definitions of these macros to ssl.h,
thereby removing the dependency of ssl.h on ssl_ciphersuites.h.
So far, the client-proposed list of elliptic curves was stored for the
duration of the entire handshake in a heap-allocated buffer referenced
from mbedtls_ssl_handshake_params::curves. It is used in the following
places:
1) When the server chooses a suitable ciphersuite, it checks that
it has a certificate matching the ciphersuite; in particular, if
the ciphersuite involves ECDHE, the server needs an EC certificate
with a curve suitable for the client.
2) When performing the ECDHE key exchange, the server choose one
curve among those proposed by the client which matches the server's
own supported curve configuration.
This commit removes the hold back the entire client-side curve list
during the handshake, by performing (1) and (2) on during ClientHello
parsing, and in case of (2) only remembering the curve chosen for ECDHE
within mbedtls_ssl_handshake_params.
* restricted/pr/608:
programs: Make `make clean` clean all programs always
ssl_tls: Enable Suite B with subset of ECP curves
windows: Fix Release x64 configuration
timing: Remove redundant include file
net_sockets: Fix typo in net_would_block()
Add all.sh component that exercises invalid_param checks
Remove mbedtls_param_failed from programs
Make it easier to define MBEDTLS_PARAM_FAILED as assert
Make test suites compatible with #include <assert.h>
Pass -m32 to the linker as well
Update library to 2.16.2
Use 'config.pl baremetal' in all.sh
Clarify ChangeLog entry for fix to #1628Fix#2370, minor typos and spelling mistakes
Add Changelog entry for clang test-ref-configs.pl fix
Enable more compiler warnings in tests/Makefile
Change file scoping of test helpers.function
* restricted/pr/594:
Adapt baremetal.h and baremetal.sh
Don't incl. CAs in CertReq message in baremetal build
Allow config'n of incl of CertificateReq CA list Y/N at compile-time
Allow configuration of endpoint (cli/srv) at compile-time
Allow configuration of read timeouts at compile-time
Allow configuration of ConnectionID at compile-time
Allow compile-time configuration of legacy renegotiation
Allow compile-time configuration of authentication mode
Allow compile-time configuration of DTLS badmac limit
Allow compile-time configuration of DTLS anti replay
* restricted/pr/601: (27 commits)
Fix compile-time guard for optional field in struct
Move code to reduce probability of conflicts
Fix typos caught by check-names.sh
Clarify conditions related to resumption in client
Introduce getter function for renego_status
Add getter function for handshake->resume
Remove now-redundant code
Remove cache callbacks from config on client
Fix a few style issues
Expand documentation of new options a bit
Fix renaming oversight in documentation
Remove backticks in doxygen in config.h
Declare dependency on tickets for two ssl-opt.sh tests
Exclude new negative options from config.pl full
Restore config.h defaults
Address review comments
Fix ssl_cli resumption guards
Fix check-files, check-names and check-generated-features
Add test to all.sh
Add changelog entry
...
* restricted/pr/584: (140 commits)
Remove superfluous new line in x509.c
Add comment about X.509 name comparison of buffer with itself
[Fixup] Add missing PK release call in Cert Verify parsing
Fix guard controlling whether nested acquire calls are allowed
Add X.509 CRT test for nested calls for CRT frame / PK acquire
Don't return threading error on release()-without-acquire() calls
Don't allow nested CRT acquire()-calls if MBEDTLS_X509_ALWAYS_FLUSH
Make X.509 CRT cache reference counting unconditional
Remove memory buffer alloc from i386 test in all.sh
Don't mention pk_sign() in the context of public-key contexts
Don't use assertion for failures of mbedtls_x509_crt_x_acquire()
Fix copy pasta in x509_crt.h
Reference copy-less versions of X.509 CRT frame/PK getters
x509_crt.c: Add blank line to increase readability
[FIXUP] Fix bug in ASN.1 traversal of silently ignored tag
[FIXUP] Fix typo in declaration of mbedtls_x509_memcasecmp()
Move signature-info extraction out of MBEDTLS_X509_REMOVE_INFO
Fix certificate validity checking logic to work with !TIME_DATE
Simplify X.509 CRT version check in UID parsing
Remove unused variable warning in on-demand X.509 parsing
...
Introduces MBEDTLS_SSL_CONF_CERT_REQ_CA_LIST which allows to configure
at compile-time whether a CA list should be included in the
CertificateRequest message sent by the server.
Impact on code-size:
| | GCC 8.2.1 | ARMC5 5.06 | ARMC6 6.12 |
| --- | --- | --- | --- |
| `libmbedtls.a` before | 23131 | 23805 | 26673 |
| `libmbedtls.a` after | 23099 | 23781 | 26639 |
| gain in Bytes | 32 | 24 | 34 |
Introduces MBEDTLS_SSL_CONF_BADMAC_LIMIT to fix the maximum
number of records with bad MAC tolerated in DTLS at compile-time.
Impact on code-size:
| | GCC | ARMC5 | ARMC6 |
| --- | --- | --- | --- |
| `libmbedtls.a` before | 23511 | 24049 | 27903 |
| `libmbedtls.a` after | 23487 | 24025 | 27885 |
| gain in Bytes | 24 | 24 | 18 |
There are a number of PRs in flight that are going to append to the list of
getter functions for harcodeable SSL conf items, so leave that list at the end
in order to avoid conflicts between this PR and the SSL conf ones.
While not strictly related to this PR, this change improves readability in
some resumption-related runtime conditions that previously had rather ugly
preprocessor directives in the middle of already complex predicates.
The session cache is only server-side. This also aligns the conditions
guarding those fields with the condition guarding the function setting them -
no need to have the fields if we can't set them.
This preserves the API and ABI in the default config as it only affects
non-default configs.
Add a new configuration option MBEDTLS_SSL_SESSION_RESUMPTION
to enable/disable the session resumption feature including
ticket and cache based session resumption.
Previously, a call to mbedtls_x509_crt_xxx_release() would return
MBEDTLS_ERR_THREADING_MUTEX_ERROR if usage counter for the frame/PK
was 0. Now that resource counting can also be used outside of
threading support, this is no longer adequate, and this commit
changes the return code to MBEDTLS_ERR_X509_FATAL_ERROR; while
generic, this at least matches the top-level module.
Forbidding nested calls to acquire() allows to remove the reference
counting logic and hence saving some bytes of code. This is valuable
because MBEDTLS_X509_ALWAYS_FLUSH is likely to be used on constrained
systems where code-size is limited.
Previously, reference counting for the CRT frames and PK contexts
handed out by mbedtls_x509_crt_{frame|pk}_acquire() was implemented
only in case threading support was enabled, which leaves the door
open for a potential use-after-free should a single-threaded application
use nested calls to mbedtls_x509_crt_acquire().
Since Mbed TLS itself does not use such nested calls, it might be
preferred long-term to forbid nesting of acquire calls on the API
level, and hence get rid of reference counting in the interest of
code-size benefits. However, this can be considered as an optimization
of X.509 on demand parsing, and for now this commit introduces
reference counting unconditionally to have a safe version of
on demand parsing to build further optimizations upon.
Previously, only one thread could access the parsing cache of an X.509 CRT
at a time. Firstly, this leads to significant performance penalties on
systems running many concurrent threads which share CRT structures --
for example, server threads sharing an SSL configuration containing the
server CRT. Secondly, the locking should be logically unnecessary, because
the threads are supposed to access the CRT frame and PK in a read-only,
or at least thread-safe manner.
This commit modifies the X.509 CRT cache implementation by allowing an
arbitrary number of concurrent readers, locking only the path of setting
up and clearing the cache.
In contrast to mbedtls_x509_crt_frame_acquire(), the public key context
returned by mbedtls_x509_crt_pk_acquire() cannot be marked `const` because
the caller must be able to use it e.g. for mbedtls_pk_sign() and
mbedtls_pk_verify(), which don't have `const` input parameters.
Instead, return a non-`const` context, but explicitly state that callers
must use that context in a thread-safe way.
We cannot move it to x509_crt.c because there are some static inline
function definitions in x509_crt.h which access members of
mbedtls_x509_crt_cache.
This commit introduces a compile-time option MBEDTLS_X509_ALWAYS_FLUSH
which controls whether releasing of CRT frames or public key contexts
associated to X.509 CRTs (or, in the future, other cached parsed X.509
structures) should lead to freeing those structures immediately.
Enabling this alongside of the MBEDTLS_X509_ON_DEMAND_PARSING leads
to significant reduction of the average RAM consumption of Mbed TLS.
The option is enabled by default to reduce the permanent RAM overhead of
MBEDTLS_X509_ON_DEMAND_PARSING in case the latter is *disabled* (default).
(Note that there is very little performance penalty enabling
MBEDTLS_X509_ALWAYS_FLUSH in case MBEDTLS_X509_ON_DEMAND_PARSING is disabled,
because hardly any parsing needs to be done to setup a CRT frame / PK context
from the legacy `mbedtls_x509_crt` structure.)
So far, the CRT frame structure `mbedtls_x509_crt_frame` used
as `issuer_raw` and `subject_raw` the _content_ of the ASN.1
name structure for issuer resp. subject. This was in contrast
to the fields `issuer_raw` and `subject_raw` from the legacy
`mbedtls_x509_crt` structure, and caused some information
duplication by having both variants `xxx_no_hdr` and `xxx_with_hdr`
in `mbedtls_x509_crt` and `mbedtls_x509_crt_frame`.
This commit removes this mismatch by solely using the legacy
form of `issuer_raw` and `subject_raw`, i.e. those _including_
the ASN.1 name header.
With the introduction of `mbedtls_x509_crt_get_{issuer|name}()`,
users need an easy way of freeing the dynamic name structures these
functions return.
To that end, this commit renames `x509_{sequence|name}_free()`
to `mbedtls_x509_{sequence|name}_free()` and gives them external linkage.
The legacy `mbedtls_x509_crt` contains fields `issuer/subject`
which are dynamically allocated linked list presentations of the
CRTs issuer and subject names, respectively.
The new CRT frame structure `mbedtls_x509_crt_frame`, however,
only provides pointers to the raw ASN.1 buffers for the issuer
and subject, for reasons of memory usage.
For convenience to users that previously used the `issuer`/`subject`
fields of `mbedtls_x509_crt`, this commit adds two public API functions
`mbedtls_x509_crt_get_subject()` and `mbedtls_x509_crt_get_issuer()`
which allow to request the legacy linked list presentation of the
CRTs subject / issuer names.
Similar to `mbedtls_x509_crt_get_pk()`, the returned names are owned
by the user, and must be freed through a call to `mbedtls_x509_name_free()`.
This commit unconditionally adds two convenience API functions:
- mbedtls_x509_crt_get_frame()
- mbedtls_x509_crt_get_pk()
which allow users to extract a CRT frame or PK context
from a certificate.
The difference with the existing acquire/release API for frame and PK
contexts is that in contrast to the latter, the structures returned by
the new API are owned by the user (and, in case of the PK context, need
to be freed by him). This makes the API easier to use, but comes at the
cost of additional memory overhead.
This commit replaces the dummy implementation of the CRT acquire/release
framework by a cache-based implementation which remembers frame and PK
associated to a CRT across multiple `acquire/release` pairs.
This commit restructures the parsing of X.509 CRTs in the following way:
First, it introduces a 'frame' structure `mbedtls_x509_crt_frame`, which
contains pointers to some structured fields of a CRT as well as copies of
primitive fields. For example, there's a pointer-length pair delimiting the raw
public key data in the CRT, but there's a C-uint8 to store the CRT version
(not a pointer-length pair delimiting the ASN.1 structure holding the version).
Setting up a frame from a raw CRT buffer does not require any memory outside
of the frame structure itself; it's just attaches a 'template' to the buffer
that allows to inspect the structured parts of the CRT afterwards.
Note that the frame structure does not correspond to a particular ASN.1
structure; for example, it contains pointers to delimit the three parts
of a CRT (TBS, SignatureAlgorithm, Signature), but also pointers to the
fields of the TBS, and pointers into the Extensions substructure of the TBS.
Further, the commit introduces an internal function `x509_crt_parse_frame()`
which sets up a frame from a raw CRT buffer, as well as several small helper
functions which help setting up the more complex structures (Subject, Issuer, PK)
from the frame.
These functions are then put to use to rewrite the existing parsing function
`mbedtls_x509_crt_parse_der_core()` by setting up a CRT frame from the input
buffer, residing on the stack, and afterwards copying the respective fields
to the actual `mbedtls_x509_crt` structure and performing the deeper parsing
through the various helper functions.
At every occasion where we're using `mbedtls_x509_memcasecmp()` we're
checking that the two buffer lengths coincide before making the call.
This commit saves a few bytes of code by moving this length check
to `mbedtls_x509_memcasecmp()`.
This commit adds a new function `mbedtls_asn1_traverse_sequence_of()`
which traverses an ASN.1 SEQUENCE and calls a user-provided callback
for each entry.
It allows to put the following constraints on the tags allowed
in the SEQUENCE:
- A tag mask and mandatory tag value w.r.t. that mask.
A non-matching tag leads to an MBEDTLS_ERR_ASN1_UNEXPECTED_TAG error.
For example, it the mask if 0xFF, this means that only
a single tag will be allowed in the SEQUENCE.
- A tag mask and optional tag value w.r.t. that mask.
A non-matching tag is silently ignored.
The main use for this flexibility is the traversal of the
`SubjectAlternativeNames` extension, where some parts of the
tag are fixed but some are flexible to indicate which type
of name the entry describes.
This is analogous to a previous commit for the `ExtendedKeyUsage`
extension: We aim at not using dynamically allocated linked lists
to represent the components of the `SubjectAlternativeName` extension,
but to traverse the raw ASN.1 data when needed.
This commit adds a field to `mbedtls_x509_crt` containing the raw
ASN.1 buffer bounds of the `SubjectAlternativeNames` extension.
This commit re-implements `mbedtls_x509_crt_check_extended_key_usage()`
to not use the dynamically allocated linked list presentation of the
`ExtendedKeyUsage` but to search for the required usage by traversing
the raw ASN.1 data.
The previous commits replace the use of dynamically allocated linked lists
for X.509 name inspection. This commit is the first in a series which attempts
the same for the `ExtendedKeyUsage` extension. So far, when a CRT is parsed,
the extension is traversed and converted into a dynamically allocated linked
list, which is then search through whenever the usage of a CRT needs to be
checked through `mbedtls_x509_check_extended_key_usage()`.
As a first step, this commit introduces a raw buffer holding the bounds
of the `ExtendedKeyUsage` extension to the `mbedtls_x509_crt` structure.
There are three operations that need to be performed on an X.509 name:
1 Initial traversal to check well-formedness of the ASN.1 structure.
2 Comparison between two X.509 name sequences.
3 Checking whether an X.509 name matches a client's ServerName request.
Each of these tasks involves traversing the nested ASN.1 structure,
In the interest of saving code, we aim to provide a single function
which can perform all of the above tasks.
The existing comparison function is already suitable not only for task 2,
but also for 1: One can simply pass two equal ASN.1 name buffers, in which
case the function will succeed if and only if that buffer is a well-formed
ASN.1 name.
This commit further adds a callback to `mbedtls_x509_name_cmp_raw()` which
is called after each successful step in the simultaneous name traversal and
comparison; it may perform any operation on the current name and potentially
signal that the comparison should be aborted.
With that, task 3 can be implemented by passing equal names and a callback
which aborts as soon as it finds the desired name component.
This commit replaces the previous calls to `mbedtls_x509_name_cmp()`
during CRT verification (to match child and parent, to check whether
a CRT is self-issued, and to match CRLs and CAs) by calls to the new
`mbedtls_x509_name_cmp_raw()` using the raw ASN.1 data; it passes the
raw buffers introduced in the last commits.
The previous name comparison function mbedtls_x509_name_cmp() is now
both unused and unneeded, and is removed.
To make use of the X.509 name comparison function based on raw
ASN.1 data that was introduced in the previous commit, this commit
adds an ASN.1 buffer field `issuer_raw_no_hdr` to `mbedtls_x509_crl`
which delimits the raw contents of the CRLs `Issuer` field.
The previous field `issuer_raw` isn't suitable for that because
it includes the ASN.1 header.
This commit provides a new function `mbedtls_x509_name_cmp_raw()`
to x509.c for comparing to X.509 names by traversing the raw ASN.1
data (as opposed to using the dynamically allocated linked list
of `mbedtls_x509_name` structures). It has external linkage because
it will be needed in `x509_crt` and `x509_crl`, but is marked
internal and hence not part of the public API.
The function `mbedtls_x509_sig_alg_gets()` previously needed the
raw ASN.1 OID string even though it is implicit in the PK and MD
parameters.
This commit modifies `mbedtls_x509_sig_alg_gets()` to infer the OID
and remove it from the parameters.
This will be needed for the new X.509 CRT structure which will
likely not store the signature OID.
Care has to be taken to handle the case of RSASSA-PSS correctly,
where the hash algorithm in the OID list is set to MBEDTLS_MD_NONE
because it's only determined by the algorithm parameters.
This commit introduces a macro `MBEDTLS_ASN1_IS_STRING_TAG`
that can be used to check if an ASN.1 tag is among the list
of string tags:
- MBEDTLS_ASN1_BMP_STRING
- MBEDTLS_ASN1_UTF8_STRING
- MBEDTLS_ASN1_T61_STRING
- MBEDTLS_ASN1_IA5_STRING
- MBEDTLS_ASN1_UNIVERSAL_STRING
- MBEDTLS_ASN1_PRINTABLE_STRING
- MBEDTLS_ASN1_BIT_STRING
If the ExtendedMasterSecret extension is configured at compile-time
by setting MBEDTLS_SSL_CONF_EXTENDED_MASTER_SECRET and/or
MBEDTLS_SSL_CONF_ENFORCE_EXTENDED_MASTER_SECRET, the runtime
configuration APIs mbedtls_ssl_conf_extended_master_secret()
and mbedtls_ssl_conf_extended_master_secret_enforce() must
either be removed or modified to take no effect (or at most
check that the runtime value matches the hardcoded one, but
that would undermine the code-size benefits the hardcoding
is supposed to bring in the first place).
Previously, the API was kept but modified to have no effect.
While convenient for us because we don't have to adapt example
applications, this comes at the danger of users calling the runtime
configuration API, forgetting that the respective fields are
potentially already hardcoded at compile-time - and hence silently
using a configuration they don't intend to use.
This commit changes the approach to removing the configuration
API in case the respective field is hardcoded at compile-time,
and exemplifies it in the only case implemented so far, namely
the configuration of the ExtendedMasterSecret extension.
It adapts ssl_client2 and ssl_server2 by omitting the call to
the corresponding API if MBEDTLS_SSL_CONF_XXX are defined and
removing the command line parameters for the runtime configuration
of the ExtendedMasterSecret extension.
This commit is the first in a series demonstrating how code-size
can be reduced by hardcoding parts of the SSL configuration at
compile-time, focusing on the example of the configuration of
the ExtendedMasterSecret extension.
The flexibility of an SSL configuration defined a runtime vs.
compile-time is necessary for the use of Mbed TLS as a
dynamically linked library, but is undesirable in constrained
environments because it introduces the following overhead:
- Definition of SSL configuration API (code-size overhead)
(and on the application-side: The API needs to be called)
- Additional fields in the SSL configuration (RAM overhead,
and potentially code-size overhead if structures grow
beyond immediate-offset bounds).
- Dereferencing is needed to obtain configuration settings.
- Code contains branches and potentially additional structure
fields to distinguish between different configurations.
Considering the example of the ExtendedMasterSecret extension,
this instantiates as follows:
- mbedtls_ssl_conf_extended_master_secret() and
mbedtls_ssl_conf_extended_master_secret_enforced()
are introduced to configure the ExtendedMasterSecret extension.
- mbedtls_ssl_config contains bitflags `extended_ms` and
`enforce_extended_master_secret` reflecting the runtime
configuration of the ExtendedMasterSecret extension.
- Whenever we need to access these fields, we need a chain
of dereferences `ssl->conf->extended_ms`.
- Determining whether Client/Server should write the
ExtendedMasterSecret extension needs a branch
depending on `extended_ms`, and the state of the
ExtendedMasterSecret negotiation needs to be stored in a new
handshake-local variable mbedtls_ssl_handshake_params::extended_ms.
Finally (that's the point of ExtendedMasterSecret) key derivation
depends on this handshake-local state of ExtendedMasterSecret.
All this is unnecessary if it is known at compile-time that the
ExtendedMasterSecret extension is used and enforced:
- No API calls are necessary because the configuration is fixed
at compile-time.
- No SSL config fields are necessary because there are corresponding
compile-time constants instead.
- Accordingly, no dereferences for field accesses are necessary,
and these accesses can instead be replaced by the corresponding
compile-time constants.
- Branches can be eliminated at compile-time because the compiler
knows the configuration. Also, specifically for the ExtendedMasterSecret
extension, the field `extended_ms` in the handshake structure
is unnecessary, because we can fail immediately during the Hello-
stage of the handshake if the ExtendedMasterSecret extension
is not negotiated; accordingly, the non-ExtendedMS code-path
can be eliminated from the key derivation logic.
A way needs to be found to allow fixing parts of the SSL configuration
at compile-time which removes this overhead in case it is used,
while at the same time maintaining readability and backwards
compatibility.
This commit proposes the following approach:
From the user perspective, for aspect of the SSL configuration
mbedtls_ssl_config that should be configurable at compile-time,
introduce a compile-time option MBEDTLS_SSL_CONF_FIELD_NAME.
If this option is not defined, the field is kept and configurable
at runtime as usual. If the option is defined, the field is logically
forced to the value of the option at compile time.
Internally, read-access to fields in the SSL configuration which are
configurable at compile-time gets replaced by new `static inline` getter
functions which evaluate to the corresponding field access or to the
constant MBEDTLS_SSL_CONF_FIELD_NAME, depending on whether the latter
is defined or not.
Write-access to fields which are configurable at compile-time needs
to be removed: Specifically, the corresponding API itself either
needs to be removed or replaced by a stub function without effect.
This commit takes the latter approach, which has the benefit of
not requiring any change on the example applications, but introducing
the risk of mismatching API calls and compile-time configuration,
in case a user doesn't correctly keep track of which parts of the
configuration have been fixed at compile-time, and which haven't.
Write-access for the purpose of setting defaults is simply omitted.
* restricted/pr/582:
Add a test for signing content with a long ECDSA key
Add documentation notes about the required size of the signature buffers
Add missing MBEDTLS_ECP_C dependencies in check_config.h
Change size of preallocated buffer for pk_sign() calls
* origin/pr/2701:
Add all.sh component that exercises invalid_param checks
Remove mbedtls_param_failed from programs
Make it easier to define MBEDTLS_PARAM_FAILED as assert
Make test suites compatible with #include <assert.h>
Pass -m32 to the linker as well
If `MBEDTLS_SSL_KEEP_PEER_CERTIFICATE` is not set, `mbedtls_ssl_session`
contains the digest of the peer's certificate for the sole purpose of
detecting a CRT change on renegotiation. Hence, it is not needed if
renegotiation is disabled.
This commit removes the `peer_cert_digest` fields (and friends) from
`mbedtls_ssl_session` if
`!MBEDTLS_SSL_KEEP_PEER_CERTIFICATE + !MBEDTLS_SSL_RENEGOTIATION`,
which is a sensible configuration for constrained devices.
Apart from straightforward replacements of
`if !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)`
by
`if !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) && \
defined(MBEDTLS_SSL_RENEGOTIATION)`,
there's one notable change: On the server-side, the CertificateVerify
parsing function is a no-op if the client hasn't sent a certificate.
So far, this was determined by either looking at the peer CRT or the
peer CRT digest in the SSL session structure (depending on the setting
of `MBEDTLS_SSL_KEEP_PEER_CERTIFICATE`), which now no longer works if
`MBEDTLS_SSL_KEEP_PEER_CERTIFICATE` is unset. Instead, this function
now checks whether the temporary copy of the peer's public key within
the handshake structure is initialized or not (which is also a
beneficial simplification in its own right, because the pubkey is
all the function needs anyway).
`MBEDTLS_SSL__ECP_RESTARTABLE` is only defined if
`MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED` is set, which
requires `MBEDTLS_X509_PARSE_C` to be set (this is checked
in `check_config.`). The additional `MBEDTLS_X509_PARSE_C`
guard around the `ecrs_peer_cert` field is therefore not
necessary; moreover, it's misleading, because it hasn't
been used consistently throughout the code.
When removing the (session-local) copy of the peer's CRT chain, we must
keep a handshake-local copy of the peer's public key, as (naturally) every
key exchange will make use of that public key at some point to verify that
the peer actually owns the corresponding private key (e.g., verify signatures
from ServerKeyExchange or CertificateVerify, or encrypt a PMS in a RSA-based
exchange, or extract static (EC)DH parameters).
This commit adds a PK context field `peer_pubkey` to the handshake parameter
structure `mbedtls_handshake_params_init()` and adapts the init and free
functions accordingly. It does not yet make actual use of the new field.
This commit adds an ASN.1 buffer field `pk_raw` to `mbedtls_x509_crt`
which stores the bounds of the raw public key data within an X.509 CRT.
This will be useful in subsequent commits to extract the peer's public
key from its certificate chain.
`mbedtls_ssl_parse_certificate()` parses the peer's certificate chain
directly into the `peer_cert` field of the `mbedtls_ssl_session`
structure being established. To allow to optionally remove this field
from the session structure, this commit changes this to parse the peer's
chain into a local variable instead first, which can then either be freed
after CRT verification - in case the chain should not be stored - or
mapped to the `peer_cert` if it should be kept. For now, only the latter
is implemented.
A subsequent commit will need this function in the session ticket
and session cache implementations. As the latter are server-side,
this commit also removes the MBEDTLS_SSL_CLI_C guard.
For now, the function is declared in ssl_internal.h and hence not
part of the public API.
This commit introduces a static helper function
`mbedtls_ssl_ciphersuite_uses_srv_cert()`
which determines whether a ciphersuite may make use of server-side CRTs.
This function is in turn uses in `mbedtls_ssl_parse_certificate()` to
skip certificate parsing for ciphersuites which don't involve CRTs.
Note: Ciphersuites not using server-side CRTs don't allow client-side CRTs
either, so it is safe to guard `mbedtls_ssl_{parse/write}_certificate()`
this way.
Note: Previously, the code uses a positive check over the suites
- MBEDTLS_KEY_EXCHANGE_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECJPAKE,
while now, it uses a negative check over `mbedtls_ssl_ciphersuite_uses_srv_cert()`,
which checks for the suites
- MBEDTLS_KEY_EXCHANGE_RSA
- MBEDTLS_KEY_EXCHANGE_RSA_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_RSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
This is equivalent since, together, those are all ciphersuites.
Quoting ssl_ciphersuites.h:
```
typedef enum {
MBEDTLS_KEY_EXCHANGE_NONE = 0,
MBEDTLS_KEY_EXCHANGE_RSA,
MBEDTLS_KEY_EXCHANGE_DHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA,
MBEDTLS_KEY_EXCHANGE_PSK,
MBEDTLS_KEY_EXCHANGE_DHE_PSK,
MBEDTLS_KEY_EXCHANGE_RSA_PSK,
MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
MBEDTLS_KEY_EXCHANGE_ECJPAKE,
} mbedtls_key_exchange_type_t;
```
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Change-Id: I056312613379890e0d70e1d08c34171287c0aa17
Some TLS-only code paths were not protected by an #ifdef and while some
compiler are happy to just silently remove them, armc5 complains:
Warning: #111-D: statement is unreachable
Let's make armc5 happy.
This is enabled by default as we generally enable things by default unless
there's a reason not to (experimental, deprecated, security risk).
We need a compile-time option because, even though the functions themselves
can be easily garbage-collected by the linker, implementing them will require
saving 64 bytes of Client/ServerHello.random values after the handshake, that
would otherwise not be needed, and people who don't need this feature
shouldn't have to pay the price of increased RAM usage.
Introduce a new configuration option MBEDTLS_CHECK_PARAMS_ASSERT,
which is disabled by default. When this option is enabled,
MBEDTLS_PARAM_FAILED defaults to assert rather than to a call to
mbedtls_param_failed, and <assert.h> is included.
This fixes#2671 (no easy way to make MBEDTLS_PARAM_FAILED assert)
without breaking backward compatibility. With this change,
`config.pl full` runs tests with MBEDTLS_PARAM_FAILED set to assert,
so the tests will fail if a validation check fails, and programs don't
need to provide their own definition of mbedtls_param_failed().
A positive option looks better, but comes with the following compatibility
issue: people using a custom config.h that is not based on the default
config.h and need TLS support would need to manually change their config in
order to still get TLS.
Work around that by making the public option negative. Internally the positive
option is used, though.
In the future (when preparing the next major version), we might want to switch
back to a positive option as this would be more consistent with other options
we have.
* origin/pr/2497:
Re-generate library/certs.c from script
Add new line at the end of test-ca2.key.enc
Use strict syntax to annotate origin of test data in certs.c
Add run to all.sh exercising !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO
Allow DHM self test to run without MBEDTLS_PEM_PARSE_C
ssl-opt.sh: Auto-skip tests that use files if MBEDTLS_FS_IO unset
Document origin of hardcoded certificates in library/certs.c
Adapt ChangeLog
Rename server1.der to server1.crt.der
Add DER encoded files to git tree
Add build instructions to generate DER versions of CRTs and keys
Document "none" value for ca_path/ca_file in ssl_client2/ssl_server2
ssl_server2: Skip CA setup if `ca_path` or `ca_file` argument "none"
ssl_client2: Skip CA setup if `ca_path` or `ca_file` argument "none"
Correct white spaces in ssl_server2 and ssl_client2
Adapt ssl_client2 to parse DER encoded test CRTs if PEM is disabled
Adapt ssl_server2 to parse DER encoded test CRTs if PEM is disabled
And use those tools in a few places. For now the purpose is just to validate
those tools before using them in all occurrences of transport-specific code.
The effect of these changes was measured with the following script:
```
set -eu
build() {
printf "\n$1\n"
CC=arm-none-eabi-gcc CFLAGS='-Werror -Os -march=armv6-m -mthumb' \
AR=arm-none-eabi-ar LD=arm-none-eabi-ld make clean lib >/dev/null
arm-none-eabi-size -t library/libmbedtls.a
}
git checkout -- include/mbedtls/config.h
scripts/config.pl unset MBEDTLS_NET_C
scripts/config.pl unset MBEDTLS_TIMING_C
scripts/config.pl unset MBEDTLS_FS_IO
scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.pl set MBEDTLS_NO_PLATFORM_ENTROPY
build "both"
scripts/config.pl unset MBEDTLS_SSL_PROTO_TLS
build "DTLS-only"
scripts/config.pl set MBEDTLS_SSL_PROTO_TLS
scripts/config.pl unset MBEDTLS_SSL_PROTO_DTLS
scripts/config.pl unset MBEDTLS_SSL_DTLS_HELLO_VERIFY
scripts/config.pl unset MBEDTLS_SSL_DTLS_ANTI_REPLAY
scripts/config.pl unset MBEDTLS_SSL_DTLS_BADMAC_LIMIT
scripts/config.pl unset MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
build "TLS-only"
git checkout -- include/mbedtls/config.h
```
The output of the script is as follows:
```
both
text data bss dec hex filename
1820 0 4 1824 720 debug.o (ex library/libmbedtls.a)
0 0 0 0 0 net_sockets.o (ex library/libmbedtls.a)
548 0 0 548 224 ssl_cache.o (ex library/libmbedtls.a)
11155 0 596 11751 2de7 ssl_ciphersuites.o (ex library/libmbedtls.a)
17160 0 0 17160 4308 ssl_cli.o (ex library/libmbedtls.a)
460 0 0 460 1cc ssl_cookie.o (ex library/libmbedtls.a)
17637 0 0 17637 44e5 ssl_srv.o (ex library/libmbedtls.a)
800 0 0 800 320 ssl_ticket.o (ex library/libmbedtls.a)
39322 60 0 39382 99d6 ssl_tls.o (ex library/libmbedtls.a)
88902 60 600 89562 15dda (TOTALS)
DTLS-only
text data bss dec hex filename
1820 0 4 1824 720 debug.o (ex library/libmbedtls.a)
0 0 0 0 0 net_sockets.o (ex library/libmbedtls.a)
548 0 0 548 224 ssl_cache.o (ex library/libmbedtls.a)
11155 0 596 11751 2de7 ssl_ciphersuites.o (ex library/libmbedtls.a)
17072 0 0 17072 42b0 ssl_cli.o (ex library/libmbedtls.a)
460 0 0 460 1cc ssl_cookie.o (ex library/libmbedtls.a)
17565 0 0 17565 449d ssl_srv.o (ex library/libmbedtls.a)
800 0 0 800 320 ssl_ticket.o (ex library/libmbedtls.a)
38953 60 0 39013 9865 ssl_tls.o (ex library/libmbedtls.a)
88373 60 600 89033 15bc9 (TOTALS)
TLS-only
text data bss dec hex filename
1820 0 4 1824 720 debug.o (ex library/libmbedtls.a)
0 0 0 0 0 net_sockets.o (ex library/libmbedtls.a)
548 0 0 548 224 ssl_cache.o (ex library/libmbedtls.a)
11155 0 596 11751 2de7 ssl_ciphersuites.o (ex library/libmbedtls.a)
14916 0 0 14916 3a44 ssl_cli.o (ex library/libmbedtls.a)
460 0 0 460 1cc ssl_cookie.o (ex library/libmbedtls.a)
15852 0 0 15852 3dec ssl_srv.o (ex library/libmbedtls.a)
800 0 0 800 320 ssl_ticket.o (ex library/libmbedtls.a)
27623 60 0 27683 6c23 ssl_tls.o (ex library/libmbedtls.a)
73174 60 600 73834 1206a (TOTALS)
```
It can be seen that a DTLS-only build is now starting to be a bit smaller than
a dual-mode build, which is the purpose of the new build option.
For now the option has no effect.
Adapted existing example config files. The fact that I needed to do this
highlights that this is a slightly incompatible change: existing users need to
update their existing custom configs (if standalone as opposed to based on the
default config) in order to still get the same behaviour.
The alternative would be to have a negative config option (eg NO_TLS or
DTLS_ONLY) but this doesn't fit as nicely with the existing options, so
hopefully the minor incompatibility is acceptable.
I don't think it's worth adding a new component to all.sh:
- builds with both DTLS and TLS are done in the default (and full) config
- TLS-only builds are done with eg config-suite-b.h in test-ref-configs
- a DTLS-only build is done with config-thread.h in test-ref-configs
- builds with none of them (and SSL_TLS_C enabled) are forbidden
Context:
The existing API `mbedtls_x509_parse_crt_der()` for parsing DER
encoded X.509 CRTs unconditionally makes creates a copy of the
input buffer in RAM. While this comes at the benefit of easy use,
-- specifically: allowing the user to free or re-use the input
buffer right after the call -- it creates a significant memory
overhead, as the CRT is duplicated in memory (at least temporarily).
This might not be tolerable a resource constrained device.
As a remedy, this commit adds a new X.509 API call
`mbedtls_x509_parse_crt_der_nocopy()`
which has the same signature as `mbedtls_x509_parse_crt_der()`
and almost the same semantics, with one difference: The input
buffer must persist and be unmodified for the lifetime of the
established instance of `mbedtls_x509_crt`, that is, until
`mbedtls_x509_crt_free()` is called.
* mbedtls-2.16:
test: Always use `make clean` by itself
list-symbols.sh: if the build fails, print the build transcript
Document "check-names.sh -v"
all.sh: invoke check-names.sh in print-trace-on-exit mode
Print a command trace if the check-names.sh exits unexpectedly
Only use submodule if present
Update change log
Reword ssl_conf_max_frag_len documentation for clarity
Ignore more generated files: seedfile, apidoc
Improve .gitignore grouping and documentation
Generate tags for Vi, for Emacs and with Global
This commit introduces a new SSL error code
`MBEDTLS_ERR_SSL_VERSION_MISMATCH`
which can be used to indicate operation failure due to a
mismatch of version or configuration.
It is put to use in the implementation of `mbedtls_ssl_session_load()`
to signal the attempt to de-serialize a session which has been serialized
in a build of Mbed TLS using a different version or configuration.
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This allows callers to discover what an appropriate size is. Otherwise they'd
have to either try repeatedly, or allocate an overly large buffer (or some
combination of those).
Adapt documentation an example usage in ssl_client2.
Avoid useless copy with mbedtls_ssl_get_session() before serialising.
Used in ssl_client2 for testing and demonstrating usage, but unfortunately
that means mbedtls_ssl_get_session() is no longer tested, which will be fixed
in the next commit.
The next commit with make the implementation publicly available as well.
For now the API is kept unchanged. The save function API has a serious drawback in that the user
must guess what an appropriate buffer size is.
Internally so far this didn't matter because we were only using that API for
ticket creation, and tickets are written to the SSL output buffer whose size
is fixed anyway, but for external users this might not be suitable. Improving
that is left for later.
Also, so far the functions are defined unconditionally. Whether we want to
re-use existing flags or introduce a new one is left for later.
Finally, currently suggested usage of calling get_session() then
session_save() is memory-inefficient in that get_session() already makes a
copy. I don't want to recommend accessing `ssl->session` directly as we want
to prohibit direct access to struct member in the future. Providing a clean
and efficient way is also left to a later commit.
All of them are copied from (former) CRT and key files in `tests/data_files`.
For files which have been regenerated since they've been copied to `certs.c`,
update the copy.
Add declarations for DER encoded test CRTs to certs.h
Add DER encoded versions of CRTs to certs.c
fix comment in certs.c
Don't use (signed) char for DER encoded certificates
Consistently use `const char *` for test CRTs regardless of encoding
Remove non-sensical and unused PW variable for DER encoded key
Provide test CRTs in PEM and DER fmt, + pick suitable per config
This commit modifies `certs.h` and `certs.c` to start following the
following pattern for the provided test certificates and files:
- Raw test data is named `NAME_ATTR1_ATTR2_..._ATTRn`
For example, there are
`TEST_CA_CRT_{RSA|EC}_{PEM|DER}_{SHA1|SHA256}`.
- Derived test data with fewer attributes, iteratively defined as one
of the raw test data instances which suits the current configuration.
For example,
`TEST_CA_CRT_RSA_PEM`
is one of `TEST_CA_CRT_RSA_PEM_SHA1` or `TEST_CA_CRT_RSA_PEM_SHA256`,
depending on whether SHA-1 and/or SHA-256 are defined in the current
config.
Add missing public declaration of test key password
Fix signedness and naming mismatches
Further improve structure of certs.h and certs.c
Fix definition of mbedtls_test_cas test CRTs depending on config
Remove semicolon after macro string constant in certs.c
This commit modifies mbedtls_ssl_get_peer_cid() to also allow passing
NULL pointers in the arguments for the peer's CID value and length, in
case this information is needed.
For example, some users might only be interested in whether the use of
the CID was negotiated, in which case both CID value and length pointers
can be set to NULL. Other users might only be interested in confirming
that the use of CID was negotiated and the peer chose the empty CID,
in which case the CID value pointer only would be set to NULL.
It doesn't make sense to pass a NULL pointer for the CID length but a
non-NULL pointer for the CID value, as the caller has no way of telling
the length of the returned CID - and this case is therefore forbidden.
This commit modifies the CID configuration API mbedtls_ssl_conf_cid_len()
to allow the configuration of the stack's behaviour when receiving an
encrypted DTLS record with unexpected CID.
Currently, the stack silently ignores DTLS frames with an unexpected CID.
However, in a system which performs CID-based demultiplexing before passing
datagrams to the Mbed TLS stack, unexpected CIDs are a sign of something not
working properly, and users might want to know about it.
This commit introduces an SSL error code MBEDTLS_ERR_SSL_UNEXPECTED_CID
which the stack can return in response to an unexpected CID. It will
conditionally be put to use in subsequent commits.
mbedtls_ssl_context contains pointers in_buf, in_hdr, in_len, ...
which point to various parts of the header of an incoming TLS or
DTLS record; similarly, there are pointers out_buf, ... for
outgoing records.
This commit adds fields in_cid and out_cid which point to where
the CID of incoming/outgoing records should reside, if present,
namely prior to where the record length resides.
Quoting https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04:
The DTLSInnerPlaintext value is then encrypted and the CID added to
produce the final DTLSCiphertext.
struct {
ContentType special_type = tls12_cid; /* 25 */
ProtocolVersion version;
uint16 epoch;
uint48 sequence_number;
opaque cid[cid_length]; // New field
uint16 length;
opaque enc_content[DTLSCiphertext.length];
} DTLSCiphertext;
For outgoing records, out_cid is set in ssl_update_out_pointers()
based on the settings in the current outgoing transform.
For incoming records, ssl_update_in_pointers() sets in_cid as if no
CID was present, and it is the responsibility of ssl_parse_record_header()
to update the field (as well as in_len, in_msg and in_iv) when parsing
records that do contain a CID. This will be done in a subsequent commit.
Finally, the code around the invocations of ssl_decrypt_buf()
and ssl_encrypt_buf() is adapted to transfer the CID from the
input/output buffer to the CID field in the internal record
structure (which is what ssl_{encrypt/decrypt}_buf() uses).
Note that mbedtls_ssl_in_hdr_len() doesn't need change because
it infers the header length as in_iv - in_hdr, which will account
for the CID for records using such.
Using the Connection ID extension increases the maximum record expansion
because
- the real record content type is added to the plaintext
- the plaintext may be padded with an arbitrary number of
zero bytes, in order to prevent leakage of information
through package length analysis. Currently, we always
pad the plaintext in a minimal way so that its length
is a multiple of 16 Bytes.
This commit adapts the various parts of the library to account
for that additional source of record expansion.
Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
This commit adds a static array `cid` to the internal structure
`mbedtls_record` representing encrypted and decrypted TLS records.
The expected evolution of state of this field is as follows:
- When handling an incoming record, the caller of `mbedtls_decrypt_buf()`
has to make sure the CID array field in `mbedtls_record` has been
properly set. Concretely, it will be copied from the CID from the record
header during record parsing.
- During decryption in `mbedtls_decrypt_buf()`, the transforms
incoming CID is compared to the CID in the `mbedtls_record`
structure representing the record to be decrypted.
- For an outgoing TLS record, the caller of `mbedtls_encrypt_buf()`
clears the CID in the `mbedtls_record` structure.
- During encryption in `mbedtls_encrypt_buf()`, the CID field in
`mbedtls_record` will be copied from the out-CID in the transform.
These will be copied from the CID fields in mbedtls_ssl_handshake_params
(outgoing CID) and mbedtls_ssl_context (incoming CID) when the transformation
is set up at the end of the handshake.
* mbedtls_ssl_context gets fields indicating whether the CID extension
should be negotiated in the next handshake, and, if yes, which CID
the user wishes the peer to use.
This information does not belong to mbedtls_ssl_handshake_params
because (a) it is configured prior to the handshake, and (b) it
applies to all subsequent handshakes.
* mbedtls_ssl_handshake_params gets fields indicating the state of CID
negotiation during the handshake. Specifically, it indicates if the
use of the CID extension has been negotiated, and if so, which CID
the peer wishes us to use for outgoing messages.
We called in tinycrypt in the file names, but uecc in config.h, all.sh and
other places, which could be confusing. Just use tinycrypt everywhere because
that's the name of the project and repo where we took the files.
The changes were made using the following commands (with GNU sed and zsh):
sed -i 's/uecc/tinycrypt/g' **/*.[ch] tests/scripts/all.sh
sed -i 's/MBEDTLS_USE_UECC/MBEDTLS_USE_TINYCRYPT/g' **/*.[ch] tests/scripts/all.sh scripts/config.pl
This commit adds tests exercising mutually inverse pairs of
record encryption and decryption transformations for the various
transformation types allowed in TLS: Stream, CBC, and AEAD.
The hash contexts `ssl_transform->md_ctx_{enc/dec}` are not used if
only AEAD ciphersuites are enabled. This commit removes them from the
`ssl_transform` struct in this case, saving a few bytes.
Analogous to the previous commit, but concerning the record decryption
routine `ssl_decrypt_buf`.
An important change regards the checking of CBC padding:
Prior to this commit, the CBC padding check always read 256 bytes at
the end of the internal record buffer, almost always going past the
boundaries of the record under consideration. In order to stay within
the bounds of the given record, this commit changes this behavior by
always reading the last min(256, plaintext_len) bytes of the record
plaintext buffer and taking into consideration the last `padlen` of
these for the padding check. With this change, the memory access
pattern and runtime of the padding check is entirely determined by
the size of the encrypted record, in particular not giving away
any information on the validity of the padding.
The following depicts the different behaviors:
1) Previous CBC padding check
1.a) Claimed padding length <= plaintext length
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+------------------------------------...
| read for padding check ...
+------------------------------------...
|
contents discarded
from here
1.b) Claimed padding length > plaintext length
+----------------------------------------+----+
| Record plaintext buffer | PL |
+----------------------------------------+----+
+-------------------------...
| read for padding check ...
+-------------------------...
|
contents discarded
from here
2) New CBC padding check
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+---------------------------------------+
| read for padding check |
+---------------------------------------+
|
contents discarded
until here
The previous version of the record encryption function
`ssl_encrypt_buf` takes the entire SSL context as an argument,
while intuitively, it should only depend on the current security
parameters and the record buffer.
Analyzing the exact dependencies, it turned out that in addition
to the currently active `ssl_transform` instance and the record
information, the encryption function needs access to
- the negotiated protocol version, and
- the status of the encrypt-then-MAC extension.
This commit moves these two fields into `ssl_transform` and
changes the signature of `ssl_encrypt_buf` to only use an instance
of `ssl_transform` and an instance of the new `ssl_record` type.
The `ssl_context` instance is *solely* kept for the debugging macros
which need an SSL context instance.
The benefit of the change is twofold:
1) It avoids the need of the MPS to deal with instances of
`ssl_context`. The MPS should only work with records and
opaque security parameters, which is what the change in
this commit makes progress towards.
2) It significantly eases testing of the encryption function:
independent of any SSL context, the encryption function can
be passed some record buffer to encrypt alongside some arbitrary
choice of parameters, and e.g. be checked to not overflow the
provided memory.
This commit adds a structure `mbedtls_record` whose instances
represent (D)TLS records. This structure will be used in the
subsequent adaptions of the record encryption and decryption
routines `ssl_decrypt_buf` and `ssl_encrypt_buf`, which currently
take the entire SSL context as input, but should only use the
record to be acted on as well as the record transformation to use.
The macro constant `MBEDTLS_SSL_MAC_ADD` defined in `ssl_internal.h`
defines an upper bound for the amount of space needed for the record
authentication tag. Its definition distinguishes between the
presence of an ARC4 or CBC ciphersuite suite, in which case the maximum
size of an enabled SHA digest is used; otherwise, `MBEDTLS_SSL_MAC_ADD`
is set to 16 to accomodate AEAD authentication tags.
This assignment has a flaw in the situation where confidentiality is
not needed and the NULL cipher is in use. In this case, the
authentication tag also uses a SHA digest, but the definition of
`MBEDTLS_SSL_MAC_ADD` doesn't guarantee enough space.
The present commit fixes this by distinguishing between the presence
of *some* ciphersuite using a MAC, including those using a NULL cipher.
For that, the previously internal macro `SSL_SOME_MODES_USE_MAC` from
`ssl_tls.c` is renamed and moved to the public macro
`MBEDTLS_SOME_MODES_USE_MAC` defined in `ssl_internal.h`.
Prior to this commit, the security parameter struct `ssl_transform`
contained a `ciphersuite_info` field pointing to the information
structure for the negotiated ciphersuite. However, the only
information extracted from that structure that was used in the core
encryption and decryption functions `ssl_encrypt_buf`/`ssl_decrypt_buf`
was the authentication tag length in case of an AEAD cipher.
The present commit removes the `ciphersuite_info` field from the
`ssl_transform` structure and adds an explicit `taglen` field
for AEAD authentication tag length.
This is in accordance with the principle that the `ssl_transform`
structure should contain the raw parameters needed for the record
encryption and decryption functions to work, but not the higher-level
information that gave rise to them. For example, the `ssl_transform`
structure implicitly contains the encryption/decryption keys within
their cipher contexts, but it doesn't contain the SSL master or
premaster secrets. Likewise, it contains an explicit `maclen`, while
the status of the 'Truncated HMAC' extension -- which determines the
value of `maclen` when the `ssl_transform` structure is created in
`ssl_derive_keys` -- is not contained in `ssl_transform`.
The `ciphersuite_info` pointer was used in other places outside
the encryption/decryption functions during the handshake, and for
these functions to work, this commit adds a `ciphersuite_info` pointer
field to the handshake-local `ssl_handshake_params` structure.
The `ssl_transform` security parameter structure contains opaque
cipher contexts for use by the record encryption/decryption functions
`ssl_decrypt_buf`/`ssl_encrypt_buf`, while the underlying key material
is configured once in `ssl_derive_keys` and is not explicitly dealt with
anymore afterwards. In particular, the key length is not needed
explicitly by the encryption/decryption functions but is nonetheless
stored in an explicit yet superfluous `keylen` field in `ssl_transform`.
This commit removes this field.
This commit improves hygiene and formatting of macro definitions
throughout the library. Specifically:
- It adds brackets around parameters to avoid unintended
interpretation of arguments, e.g. due to operator precedence.
- It adds uses of the `do { ... } while( 0 )` idiom for macros that
can be used as commands.
* restricted/pr/553:
Fix mbedtls_ecdh_get_params with new ECDH context
Add changelog entry for mbedtls_ecdh_get_params robustness
Fix ecdh_get_params with mismatching group
Add test case for ecdh_get_params with mismatching group
Add test case for ecdh_calc_secret
Fix typo in documentation
Alternative implementations are often hardware accelerators and might
not need an RNG for blinding. But if they do, then we make them misuse
the RNG in the deterministic case.
There are several way around this:
- Exposing a lower level function for replacement. This would be the
optimal solution, but litters the API and is not backward compatible.
- Introducing a new compile time option for replacing the deterministic
function. This would mostly cover the same code as
MBEDTLS_ECDSA_DETERMINISTIC and would be yet another compile time flag.
- Reusing the existing MBEDTLS_ECDSA_DETERMINISTIC macro. This changes
the algorithm used by the PK layer from deterministic to randomised if
the alternative implementation is present.
This commit implements the third option. This is a temporary solution
and should be fixed at the next device driver API change.
`mbedtls_ecdsa_sign_det` reuses the internal HMAC-DRBG instance to
implement blinding. The advantage of this is that the algorithm is
deterministic too, not just the resulting signature. The drawback is
that the blinding is always the same for the same key and message.
This diminishes the efficiency of blinding and leaks information about
the private key.
A function that takes external randomness fixes this weakness.
* restricted/pr/550:
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
As there are some definitions that are defined regardless of
whether MBEDTLS_ECP_RESTARTABLE is defined or not, these definitions
need to be moved outside the MBEDTLS_ECP_ALT guards. This is a simple
move as MBEDTLS_ECP_ALT and MBEDTLS_ECP_RESTARTABLE are mutually
exclusive options.
Document when a context must be initialized or not, when it must be
set up or not, and whether it needs a private key or a public key will
do.
The implementation is sometimes more liberal than the documentation,
accepting a non-set-up context as a context that can't perform the
requested information. This preserves backward compatibility.
For mbedtls_pk_parse_key and mbedtls_pk_parse_keyfile, the password is
optional. Clarify what this means: NULL is ok and means no password.
Validate parameters and test accordingly.
A 0-length buffer for the key is a legitimate edge case. Ensure that
it works, even with buf=NULL. Document the key and keylen parameters.
There are already test cases for parsing an empty buffer. A subsequent
commit will add tests for writing to an empty buffer.
