Section 4.2.8 of RFC 6347 describes how to handle the case of a DTLS client
establishing a new connection using the same UDP quartet as an already active
connection, which we implement under the compile option
MBEDTLS_SSL_DLTS_CLIENT_PORT_REUSE. Relevant excerpts:
[the server] MUST NOT destroy the existing
association until the client has demonstrated reachability either by
completing a cookie exchange or by completing a complete handshake
including delivering a verifiable Finished message.
[...]
The reachability requirement prevents
off-path/blind attackers from destroying associations merely by
sending forged ClientHellos.
Our code chooses to use a cookie exchange for establishing reachability, but
unfortunately that check was effectively removed in a recent refactoring,
which changed what value ssl_handle_possible_reconnect() needs to return in
order for ssl_get_next_record() (introduced in that refactoring) to take the
proper action. Unfortunately, in addition to changing the value, the
refactoring also changed a return statement to an assignment to the ret
variable, causing the function to reach the code for a valid cookie, which
immediately destroys the existing association, effectively bypassing the
cookie verification.
This commit fixes that by immediately returning after sending a
HelloVerifyRequest when a ClientHello without a valid cookie is found. It also
updates the description of the function to reflect the new return value
convention (the refactoring updated the code but not the documentation).
The commit that changed the return value convention (and introduced the bug)
is 2fddd3765e, whose commit message explains the
change.
Note: this bug also indirectly caused the ssl-opt.sh test case "DTLS client
reconnect from same port: reconnect" to occasionally fail due to a race
condition between the reception of the ClientHello carrying a valid cookie and
the closure of the connection by the server after noticing the ClientHello
didn't carry a valid cookie after it incorrectly destroyed the previous
connection, that could cause that ClientHello to be invisible to the server
(if that message reaches the server just before it does `net_close()`). A
welcome side effect of this commit is to remove that race condition, as the
new connection will immediately start with a ClientHello carrying a valid
cookie in the SSL input buffer, so the server will not call `net_close()` and
not risk discarding a better ClientHello that arrived in the meantime.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
mbedtls.doxyfile - PROJECT_NAME - mbed TLS v2.16.6 chosen.
doc_mainpage.h - mbed TLS v2.16.6 version chosen.
hmac_drbg.h - line 260, extended description chosen.
- line 313, extended description chosen.
- line 338, extended description chosen.
version.h - 2.16.6 chosen.
CMakeLists.txt - 2.16.6 chosen.
test_suite_version.data - 2.16.6 chosen.
Makefile - 141 - manual correction - baremetal version of C_SOURCE_FILES
with variables for directories plus 2.16.6 CTAGS addition.
pkparse.c - lines 846 onwards - the asn1_get_nonzero_mpi implementation chosen.
ssl_tls.c - line 5269 - edited manually, left the ret=0, because baremetal has
a different behaviour since commit 87b5626, but added a debug
message that's new in 2.16.6.
all.sh:
- component_build_deprecated - chosen the refactored version from 2.16.6,
but with extra flags from baremetal.
- rest of the _no_xxx tests - merged make options to have PTHREAD=1 and
other changes from 2.16.6 (like -O1 instead of -O0).
- component_build_arm_none_eabi_gcc_no_64bit_multiplication - added
TINYCRYPT_BUILD=0 to the 2.16.6 version of make.
x509/req_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
x509/crl_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
x509/cert_app.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_mail_client.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_pthread_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl/ssl_fork_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_client1.c - line 54 - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_client2.c - line 54 - left baremetal log but with mbedtls_exit( 0 ) call.
- line 132 - new options of both branches added.
- skip close notify handled as in 2.16.6, but with `ssl` instead of `&ssl`.
- Merged the 2.16.6 usage split with additional baremetal usages.
- Merged options from baremetal and 2.16.6.
ssl_server.c - left baremetal log but with mbedtls_exit( 0 ) call.
ssl_server2.c - Merged the 2.16.6 usage split with additional baremetal usages.
config.pl - fixed missing defines from the documentation, removed duplicates,
and reorganised so that the documentation and excluded list
are ordered in the same way.
test_suite_x509parse.data - only added the two new pathlen tests.
x509_crt.c - change the return code by removing
MBEDTLS_ERR_X509_INVALID_EXTENSIONS, since it's added by
x509_crt_frame_parse_ext not by an "or", but by "+=".
Changelog - Assigned all entries to appropriate sections.
ssl-opt.sh - line 8263 - merged options.
- removed lines 1165 - 1176 - there was a duplicate test, probably
an artifact of previous merges.
check-files.py - sticked to old formatting.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This reverts commit 7550e857bf, reversing
changes made to d0c2575324.
stat() will never return S_IFLNK as the file type, as stat()
explicitly follows symlinks.
Fixes#3005.
If Y was constructed through functions in this module, then Y->n == 0
iff Y->p == NULL. However we do not prevent filling mpi structures
manually, and zero may be represented with n=0 and p a valid pointer.
Most of the code can cope with such a representation, but for the
source of mbedtls_mpi_copy, this would cause an integer underflow.
Changing the test for zero from Y->p==NULL to Y->n==0 causes this case
to work at no extra cost.
When mbedtls_x509_crt_parse_path() checks each object in the supplied path, it only processes regular files. This change makes it also accept a symlink to a file. Fixes#3005.
This was observed to be a problem on Fedora/CentOS/RHEL systems, where the ca-bundle in the default location is actually a symlink.
The functions mbedtls_ctr_drbg_random() and
mbedtls_ctr_drbg_random_with_add() could return 0 if an AES function
failed. This could only happen with alternative AES
implementations (the built-in implementation of the AES functions
involved never fail), typically due to a failure in a hardware
accelerator.
Bug reported and fix proposed by Johan Uppman Bruce and Christoffer
Lauri, Sectra.
This issue has been reported by Tuba Yavuz, Farhaan Fowze, Ken (Yihang) Bai,
Grant Hernandez, and Kevin Butler (University of Florida) and
Dave Tian (Purdue University).
In AES encrypt and decrypt some variables were left on the stack. The value
of these variables can be used to recover the last round key. To follow best
practice and to limit the impact of buffer overread vulnerabilities (like
Heartbleed) we need to zeroize them before exiting the function.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
The blinding applied to the scalar before modular inversion is
inadequate. Bignum is not constant time/constant trace, side channel
attacks can retrieve the blinded value, factor it (it is smaller than
RSA keys and not guaranteed to have only large prime factors). Then the
key can be recovered by brute force.
Reducing the blinded value makes factoring useless because the adversary
can only recover pk*t+z*N instead of pk*t.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
The former test-only function mbedtls_ctr_drbg_seed_entropy_len() is
no longer used, but keep it for strict ABI compatibility.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
ssl_decompress_buf() was operating on data from the ssl context, but called at
a point where this data is actually in the rec structure. Call it later so
that the data is back to the ssl structure.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
There is a 50% performance drop in the SCA_CM enabled encrypt and
decrypt functions. Therefore use the older version of encrypt/decypt
functions when SCA_CM is disabled.
-Do not reuse any part of randomized number, use separate byte for
each purpose.
-Combine some separate loops together to get rid of gap between them
-Extend usage of flow_control
* upstream/pr/2945:
Rename macro MBEDTLS_MAX_RAND_DELAY
Update signature of mbedtls_platform_random_delay
Replace mbedtls_platform_enforce_volatile_reads 2
Replace mbedtls_platform_enforce_volatile_reads
Add more variation to random delay countermeasure
Add random delay to enforce_volatile_reads
Update comments of mbedtls_platform_random_delay
Follow Mbed TLS coding style
Add random delay function to platform_utils
When reading the input, buffer will be initialised with random data
and the reading will start from a random offset. When writing the data,
the output will be initialised with random data and the writing will start
from a random offset.
When reading the input, the buffer will be initialised with random data
and the reading will start from a random offset. When writing the data,
the output will be initialised with random data and the writing will
start from a random offset.
Add more variation to the random delay function by xor:ing two
variables. It is not enough to increment just a counter to create a
delay as it will be visible as uniform delay that can be easily
removed from the trace by analysis.
The flag is used for tracking if the premaster has
been succesfully generated. Note that when resuming
a session, the flag should not be used when trying to
notice if all the key generation/derivation has been done.
Default flow assumes failure causes multiple issues with
compatibility tests when the return value is initialised
with error value in ssl_in_server_key_exchange_parse.
The function would need a significant change in structure for this.
The verification could be skipped in server, changed the default flow
so that the handshake status is ever updated if the verify
succeeds, and that is checked twice.
Check that the encryption has been done for the outbut buffer.
This is to ensure that glitching out the encryption doesn't
result as a unecrypted buffer to be sent.
This is to enable hardening the security when changing
states in state machine so that the state cannot be changed by bit flipping.
The later commit changes the enumerations so that the states have large
hamming distance in between them to prevent this kind of attack.
-Replace usage of rand() with mbedtls_platform_random_in_range()
-Prevent for-ever loop by hardcoding SCA countermeasure position in
case of used random function is always returning constant number.
-Use separate control bytes for start and final round to get them
randomized separately.
-Remove struct name.
-Fix comments and follow Mbed TLS coding style.
