Commit Graph

281 Commits

Author SHA1 Message Date
Bence Szépkúti
44bfbe3b95 Update copyright notices to use Linux Foundation guidance
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.

Also remove the now-redundant lines declaring that the files are part of
MbedTLS.

This commit was generated using the following script:

# ========================
#!/bin/sh

# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '

# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I

# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================

Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
2020-08-19 16:54:51 +02:00
Bence Szépkúti
4e9f71227a Update license headers to Apache-2.0 OR GPL-2.0-or-later
This will allow us to ship the LTS branches in a single archive

This commit was generated using the following script:

# ========================
#!/bin/sh

header1='\ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later\
 *\
 *  This file is provided under the Apache License 2.0, or the\
 *  GNU General Public License v2.0 or later.\
 *\
 *  **********\
 *  Apache License 2.0:\
 *\
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may\
 *  not use this file except in compliance with the License.\
 *  You may obtain a copy of the License at\
 *\
 *  http://www.apache.org/licenses/LICENSE-2.0\
 *\
 *  Unless required by applicable law or agreed to in writing, software\
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
 *  See the License for the specific language governing permissions and\
 *  limitations under the License.\
 *\
 *  **********\
 *\
 *  **********\
 *  GNU General Public License v2.0 or later:\
 *\
 *  This program is free software; you can redistribute it and/or modify\
 *  it under the terms of the GNU General Public License as published by\
 *  the Free Software Foundation; either version 2 of the License, or\
 *  (at your option) any later version.\
 *\
 *  This program is distributed in the hope that it will be useful,\
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of\
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\
 *  GNU General Public License for more details.\
 *\
 *  You should have received a copy of the GNU General Public License along\
 *  with this program; if not, write to the Free Software Foundation, Inc.,\
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\
 *\
 *  **********'

find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i "
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I s/\/\*/&\n */

# Insert new copyright header
/SPDX-License-Identifier/ i\
$header1

# Delete old copyright header
/SPDX-License-Identifier/,$ {
  # Delete lines until the one preceding the mbedtls declaration
  N
  1,/This file is part of/ {
    /This file is part of/! D
  }
}
"

# Format copyright header for inclusion into scripts
header2=$(echo "$header1" | sed 's/^\\\? \* \?/#/')

find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i "
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header2

# Delete old copyright header
/SPDX-License-Identifier/,$ {
  # Delete lines until the one preceding the mbedtls declaration
  N
  1,/This file is part of/ {
    /This file is part of/! D
  }
}
"
# ========================

Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
2020-06-15 12:56:41 +02:00
Gilles Peskine
087bb4c5b1
Merge pull request #2705 from k-stachowiak/unified-exit-in-examples-2.7
Backport 2.7: Unify the example programs' termination
2020-05-12 10:47:04 +02:00
Krzysztof Stachowiak
a08652233d Unify the example programs' termination
This is done to account for platforms, for which we want custom behavior
upon the program termination, hence we call `mbedtls_exit()` instead of
returning from `main()`.

For the sake of consistency, introduces the modifications have been made
to the test and utility examples as well. These, while less likely to be
used in the low level environments, won't suffer from such a change.
2020-05-11 22:20:32 +02:00
Gilles Peskine
63d92c6633 Strict C99: don't use extremely large string literals
Don't use string literals that are longer than 4095 bytes, which is
the minimum that C99 compilers are required to support. Compilers are
extremely likely to support longer literals, but `gcc -std=c99 -pedantic`
complains.

Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
2020-04-30 18:47:36 +02:00
Jaeden Amero
334ab9b7cb Merge remote-tracking branch 'origin/pr/2498' into mbedtls-2.7
* origin/pr/2498:
  Adapt ChangeLog
  ssl_server2: Fail gracefully if no PEM-encoded CRTs are available
  ssl_server2: Skip CA setup if `ca_path` or `ca_file` argument "none"
  ssl_client2: Fail gracefully if no PEM-encoded CRTs are available
  ssl_client2: Skip CA setup if `ca_path` or `ca_file` argument "none"
2019-06-14 08:48:10 +01:00
Ron Eldor
9840c215f3 Add guards for MBEDTLS_X509_CRL_PARSE_C in sample
Add checks in `ssl_server2` that `MBEDTLS_X509_CRL_PARSE_C` is defined
to fix compilation issue. Fixes #560.
2019-04-04 15:11:42 +03:00
Hanno Becker
beaf3d0eaa ssl_server2: Fail gracefully if no PEM-encoded CRTs are available 2019-03-05 16:22:55 +00:00
Hanno Becker
d6bbf05f7c ssl_server2: Skip CA setup if ca_path or ca_file argument "none"
This allows to test PSK-based ciphersuites via ssl_server2 in builds
which have MBEDTLS_X509_CRT_PARSE_C enabled but both MBEDTLS_FS_IO and
MBEDTLS_CERTS_C disabled.
2019-03-05 16:22:39 +00:00
Hanno Becker
6950ebb31f Document psk_list parameter of ssl_server2 example program 2019-01-14 09:27:04 +00:00
Simon Butcher
fa8c974329 Merge remote-tracking branch 'public/pr/2115' into mbedtls-2.7-proposed 2018-11-04 18:42:47 +00:00
Simon Butcher
437f96e3a4 Add a macro to define the memory size in ssl_server2.c
When MBEDTLS_MEMORY_BUFFER_ALLOC_C was defined, the sample ssl_server2.c was
using its own memory buffer for memory allocated by the library. The memory
used wasn't obvious, so this adds a macro for the memory buffer allocated to
make the allocated memory size more obvious and hence easier to configure.
2018-10-18 10:08:56 +01:00
Simon Butcher
35007df398 Increase the memory buffer size for ssl_server2.c
Newer features in the library have increased the overall RAM usage of the
library, when all features are enabled. ssl_server2.c, with all features enabled
was running out of memory for the ssl-opt.sh test 'Authentication: client
max_int chain, server required'.

This commit increases the memory buffer allocation for ssl_server2.c to allow
the test to work with all features enabled.
2018-10-18 10:08:53 +01:00
Hanno Becker
f690ffa53c Fix ordering of free()ing of internal structures in ssl_server2
If `MBEDTLS_MEMORY_BUFFER_ALLOC_C` is configured and Mbed TLS'
custom buffer allocator is used for calloc() and free(), the
read buffer used by the server example application is allocated
from the buffer allocator, but freed after the buffer allocator
has been destroyed. If memory backtracing is enabled, this leaves
a memory leak in the backtracing structure allocated for the buffer,
as found by valgrind.

Fixes #2069.
2018-10-09 12:45:46 +01:00
Andrzej Kurek
3d5cd4ec0a Remove trailing whitespace 2018-09-26 22:53:13 +01:00
Andrzej Kurek
216b40de9b ssl_server2: add buffer overhead for a termination character
Switch to mbedtls style of memory allocation
2018-09-26 22:53:12 +01:00
Andrzej Kurek
557335e56d Added buffer_size and response_size options for ssl-server2.
Added appropriate tests.
2018-09-26 22:53:12 +01:00
Manuel Pégourié-Gonnard
4fa619fe56 Fix race condition in error printing in ssl_server2.c
The race goes this way:
1. ssl_recv() succeeds (ie no signal received yet)
2. processing the message leads to aborting handshake with ret != 0
3. reset ret if we were signaled
4. print error if ret is still non-zero
5. go back to net_accept() which can be interrupted by a signal
We print the error message only if the signal is received between steps 3 and
5, not when it arrives between steps 1 and 3.

This can cause failures in ssl-opt.sh where we check for the presence of "Last
error was..." in the server's output: if we perform step 2, the client will be
notified and exit, then ssl-opt.sh will send SIGTERM to the server, but if it
didn't get a chance to run and pass step 3 in the meantime, we're in trouble.

The purpose of step 3 was to avoid spurious "Last error" messages in the
output so that ssl-opt.sh can check for a successful run by the absence of
that message. However, it is enough to suppress that message when the last
error we get is the one we expect from being interrupted by a signal - doing
more could hide real errors.

Also, improve the messages printed when interrupted to make it easier to
distinguish the two cases - this could be used in a testing script wanted to
check that the server doesn't see the client as disconnecting unexpectedly.
2018-01-25 11:27:24 +01:00
Ron Eldor
71f68c4043 Fix ssl_server2 sample application prompt
FIx the type of server_addr parameter from %d to %s.
Issue reported by Email by Bei Jin
2017-10-06 11:59:13 +01:00
Ron Eldor
2a47be5012 Minor: Fix typos in program comments
Fix a couple of typos and writer's mistakes,
in some reference program applications
2017-07-27 21:44:33 +01:00
Hanno Becker
8651a43e95 Remove %zu format string from ssl_client2 and ssl_server2 2017-06-09 16:13:22 +01:00
Hanno Becker
e6706e62d8 Add tests for missing CA chains and bad curves.
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
2017-06-07 11:26:59 +01:00
Gilles Peskine
682df09159 Allow SHA-1 in server tests, when the signature_algorithm extension is not used 2017-06-06 18:44:14 +02:00
Gilles Peskine
bc70a1836b Test that SHA-1 defaults off
Added tests to validate that certificates signed using SHA-1 are
rejected by default, but accepted if SHA-1 is explicitly enabled.
2017-06-06 18:44:14 +02:00
Gilles Peskine
ef86ab238f Allow SHA-1 in X.509 and TLS tests
SHA-1 is now disabled by default in the X.509 layer. Explicitly enable
it in our tests for now. Updating all the test data to SHA-256 should
be done over time.
2017-06-06 18:44:13 +02:00
Janos Follath
4817e27d4d Add the CA list suppression option to ssl_server2
Adding the CA suppression list option to the 'ssl_server2' sample
program is a prerequisite for adding tests for this feature to the
integration test suite (ssl-opt.sh).
2017-05-16 10:22:37 +01:00
Andres AG
0b736db0f3 Remove use of inttypes.h in MSVC from ssl_server2
The sample application programs/ssl/ssl_server2.c was previously
modifies to use inttypes.h to parse a string to a 64-bit integer.
However, MSVC does not support C99, so compilation fails. This
patch modifies the sample app to use the MSVC specific parsing
functions instead of inttypes.h.
2017-03-01 23:24:35 +00:00
Andres AG
692ad84e5c Add DTLS test to check 6 byte record ctr is cmp
Add a test to ssl-opt.sh to ensure that in DTLS a 6 byte record counter
is compared in ssl_check_ctr_renegotiate() instead of a 8 byte one as in
the TLS case. Because currently there are no testing facilities to check
that renegotiation routines are triggered after X number of input/output
messages, the test consists on setting a renegotiation period that
cannot be represented in 6 bytes, but whose least-significant byte is 2.
If the library behaves correctly, the renegotiation routines will be
executed after two exchanged.
2017-01-19 16:30:57 +00:00
Andres AG
788aa4a812 Rename net.{c,h} to net_sockets.{c,h}
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
2016-09-26 23:23:52 +01:00
Simon Butcher
d3138c35c6 Fixes SSL sample apps for non-default configs
Fixes the SSL sample applications to build for the non-default configs
which don't build if MBEDTLS_PLATFORM_C isn't defined.
2016-04-27 01:26:50 +01:00
Manuel Pégourié-Gonnard
fadacb9d0b Merge branch 'development' into iotssl-461-ecjpake-finalization
* development: (73 commits)
  Bump yotta dependencies version
  Fix typo in documentation
  Corrected misleading fn description in ssl_cache.h
  Corrected URL/reference to MPI library
  Fix yotta dependencies
  Fix minor spelling mistake in programs/pkey/gen_key.c
  Bump version to 2.1.2
  Fix CVE number in ChangeLog
  Add 'inline' workaround where needed
  Fix references to non-standard SIZE_T_MAX
  Fix yotta version dependencies again
  Upgrade yotta dependency versions
  Fix compile error in net.c with musl libc
  Add missing warning in doc
  Remove inline workaround when not useful
  Fix macroization of inline in C++
  Changed attribution for Guido Vranken
  Merge of IOTSSL-476 - Random malloc in pem_read()
  Fix for IOTSSL-473 Double free error
  Fix potential overflow in CertificateRequest
  ...

Conflicts:
	include/mbedtls/ssl_internal.h
	library/ssl_cli.c
2015-10-20 15:00:29 +02:00
Manuel Pégourié-Gonnard
70905a7855 Add ecjpake_pw option to ssl_client2/server2 2015-09-16 22:58:29 +02:00
Manuel Pégourié-Gonnard
22311ae62e Improve help message of ssl_*2.c 2015-09-09 11:22:58 +02:00
Manuel Pégourié-Gonnard
3f09b6d4c2 Fix API 2015-09-08 11:58:14 +02:00
Manuel Pégourié-Gonnard
37ff14062e Change main license to Apache 2.0 2015-09-04 14:21:07 +02:00
Simon Butcher
ed51594337 Merge pull request #265 from ARMmbed/iotssl-460-bugfixes
Iotssl 460 bugfixes
2015-09-02 23:36:36 +01:00
Manuel Pégourié-Gonnard
a2cda6bfaf Add mbedtls_ssl_get_max_frag_len()
This is not very useful for TLS as mbedtls_ssl_write() will automatically
fragment and return the length used, and the application should check for that
anyway, but this is useful for DTLS where mbedtls_ssl_write() returns an
error, and the application needs to be able to query the maximum length
instead of just guessing.
2015-08-31 20:47:04 +02:00
Manuel Pégourié-Gonnard
ea35666f50 Fix -Wshadow warnings
Checked that it is supported by gcc 4.2.1 (FreeBSD 9).

fixes #240
2015-08-31 10:34:26 +02:00
Manuel Pégourié-Gonnard
6fb8187279 Update date in copyright line 2015-07-28 17:11:58 +02:00
Manuel Pégourié-Gonnard
6755717f18 Fix stupid typo in ssl_server2.c 2015-07-02 11:15:48 +02:00
Manuel Pégourié-Gonnard
9de64f5af1 Fix MSVC warnings in library and programs 2015-07-01 16:56:08 +02:00
Manuel Pégourié-Gonnard
052f28853b Cosmetics in debug in ssl_{client,server}2.c
Print only the basename from the file, and print level too.
2015-07-01 12:01:13 +02:00
Manuel Pégourié-Gonnard
abc729e664 Simplify net_accept() with UDP sockets
This is made possible by the new API where net_accept() gets a pointer to
bind_ctx, so it can update it.
2015-07-01 01:28:24 +02:00
Manuel Pégourié-Gonnard
3d7d00ad23 Rename mbedtls_net_close() to mbedtls_net_free()
close() may be more meaningful, but free() is symmetric with _init(), and more
consistent with all other modules
2015-06-30 16:50:37 +02:00
Manuel Pégourié-Gonnard
5db64328ab Adapt programs to the new NET API 2015-06-30 16:48:17 +02:00
Manuel Pégourié-Gonnard
1c5b9fc19f Avoid truncating peer cert info in ssl_server2 2015-06-27 14:38:51 +02:00
Manuel Pégourié-Gonnard
61ee351af4 Adapt programs to the new debug API 2015-06-23 23:30:16 +02:00
Manuel Pégourié-Gonnard
c0d749418b Make 'port' a string in NET module
- avoids dependency on snprintf
- allows using "smtps" instead of "456" if desired
2015-06-23 13:09:11 +02:00
Manuel Pégourié-Gonnard
6ea831dcf4 Add tests for mbedtls_set_hs_ca_chain() 2015-06-22 17:30:18 +02:00
Manuel Pégourié-Gonnard
4d6f178376 Add support for SNI CA and authmode in ssl_server2 2015-06-22 14:52:40 +02:00