Depends on the current transform, which might change when retransmitting a
flight containing a Finished message, so compute it only after the transform
is swapped.
Use the same values as other 3d tests: this makes the test hopefully a bit
faster than the default values, while not increasing the failure rate.
While at it:
- adjust "needs_more_time" setting for 3d interop tests (we can't set the
timeout values for other implementations, so the test might be slow)
- fix some supposedly DTLS 1.0 test that were using dtls1_2 on the command
line
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
Now that the UDP proxy has the ability to delay specific
handshake message on the client and server side, use
this to rewrite the reordering tests and thereby make
them independent on the choice of PRNG used by the proxy
(which is not stable across platforms).
The SSL context is passed to the reassembly preparation function
ssl_prepare_reassembly_buffer() solely for the purpose of allowing
debugging output. This commit marks the context as unused if
debugging is disabled (through !MBEDTLS_DEBUG_C).
This commit implements the buffering of a record from the next epoch.
- The buffering substructure of mbedtls_ssl_handshake_params
gets another field to hold a raw record (incl. header) from
a future epoch.
- If ssl_parse_record_header() sees a record from the next epoch,
it signals that it might be suitable for buffering by returning
MBEDTLS_ERR_SSL_EARLY_MESSAGE.
- If ssl_get_next_record() finds this error code, it passes control
to ssl_buffer_future_record() which may or may not decide to buffer
the record; it does so if
- a handshake is in progress,
- the record is a handshake record
- no record has already been buffered.
If these conditions are met, the record is backed up in the
aforementioned buffering substructure.
- If the current datagram is fully processed, ssl_load_buffered_record()
is called to check if a record has been buffered, and if yes,
if by now the its epoch is the current one; if yes, it copies
the record into the (empty! otherwise, ssl_load_buffered_record()
wouldn't have been called) input buffer.
This commit implements future handshake message buffering
and loading by implementing ssl_load_buffered_message()
and ssl_buffer_message().
Whenever a handshake message is received which is
- a future handshake message (i.e., the sequence number
is larger than the next expected one), or which is
- a proper fragment of the next expected handshake message,
ssl_buffer_message() is called, which does the following:
- Ignore message if its sequence number is too far ahead
of the next expected sequence number, as controlled by
the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS.
- Otherwise, check if buffering for the message with the
respective sequence number has already commenced.
- If not, allocate space to back up the message within
the buffering substructure of mbedtls_ssl_handshake_params.
If the message is a proper fragment, allocate additional
space for a reassembly bitmap; if it is a full message,
omit the bitmap. In any case, fall throuh to the next case.
- If the message has already been buffered, check that
the header is the same, and add the current fragment
if the message is not yet complete (this excludes the
case where a future message has been received in a single
fragment, hence omitting the bitmap, and is afterwards
also received as a series of proper fragments; in this
case, the proper fragments will be ignored).
For loading buffered messages in ssl_load_buffered_message(),
the approach is the following:
- Check the first entry in the buffering window (the window
is always based at the next expected handshake message).
If buffering hasn't started or if reassembly is still
in progress, ignore. If the next expected message has been
fully received, copy it to the input buffer (which is empty,
as ssl_load_buffered_message() is only called in this case).
This commit returns the error code MBEDTLS_ERR_SSL_EARLY_MESSAGE
for proper handshake fragments, forwarding their treatment to
the buffering function ssl_buffer_message(); currently, though,
this function does not yet buffer or reassembly HS messages, so:
! This commit temporarily disables support for handshake reassembly !
This commit introduces helper functions
- ssl_get_hs_frag_len()
- ssl_get_hs_frag_off()
to parse the fragment length resp. fragment offset fields
in the handshake header.
Moreover, building on these helper functions, it adds a
function ssl_check_hs_header() checking the validity of
a DTLS handshake header with respect to the specification,
i.e. the indicated fragment must be a subrange of the total
handshake message, and the total handshake fragment length
(including header) must not exceed the record content size.
These checks were previously performed at a later stage during
ssl_reassemble_dtls_handshake().
This commit introduces a static helper function ssl_get_hs_total_len()
parsing the total message length field in the handshake header, and
puts it to use in mbedtls_ssl_prepare_handshake_record().
This commit introduces, but does not yet put to use, a sub-structure
of mbedtls_ssl_handshake_params::buffering that will be used for the
buffering and/or reassembly of handshake messages with handshake
sequence numbers that are greater or equal to the next expected
sequence number.
This commit introduces a sub-structure `buffering` within
mbedtls_ssl_handshake_params that shall contain all data
related to the reassembly and/or buffering of handshake
messages.
Currently, only buffering of CCS messages is implemented,
so the only member of this struct is the previously introduced
`seen_ccs` field.
This commit introduces a static function ssl_hs_is_proper_fragment()
to check if the current incoming handshake message is a proper fragment.
It is used within mbedtls_ssl_prepare_handshake_record() to decide whether
handshake reassembly through ssl_reassemble_dtls_handshake() is needed.
The commit changes the behavior of the library in the (unnatural)
situation where proper fragments for a handshake message are followed
by a non-fragmented version of the same message. In this case,
the previous code invoked the handshake reassembly routine
ssl_reassemble_dtls_handshake(), while with this commit, the full
handshake message is directly forwarded to the user, no altering
the handshake reassembly state -- in particular, not freeing it.
As a remedy, freeing of a potential handshake reassembly structure
is now done as part of the handshake update function
mbedtls_ssl_update_handshake_status().
This commit adds a parameter to ssl_prepare_reassembly_buffer()
allowing to disable the allocation of space for a reassembly bitmap.
This will allow this function to be used for the allocation of buffers
for future handshake messages in case these need no fragmentation.
This commit moves the code-path preparing the handshake
reassembly buffer, consisting of header, message content,
and reassembly bitmap, to a separate function
ssl_prepare_reassembly_buffer().
This leads future HS messages to traverse the buffering
function ssl_buffer_message(), which however doesn't do
anything at the moment for HS messages. Since the error
code MBEDTLS_ERR_SSL_EARLY_MESSAGE is afterwards remapped
to MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -- which is what
was returned prior to this commit when receiving a future
handshake message -- this commit therefore does not yet
introduce any change in observable behavior.
This commit implements support for remembering out-of-order
CCS messages. Specifically, a flag is set whenever a CCS message
is read which remains until the end of a flight, and when a
CCS message is expected and a CCS message has been seen in the
current flight, a synthesized CCS record is created.
This commit introduces a function ssl_record_is_in_progress()
to indicate if there is there is more data within the current
record to be processed. Further, it moves the corresponding
call from ssl_read_record_layer() to the parent function
mbedtls_ssl_read_record(). With this change, ssl_read_record_layer()
has the sole purpose of fetching and decoding a new record,
and hence this commit also renames it to ssl_get_next_record().
Subsequent commits will potentially inject buffered
messages after the last incoming message has been
consumed, but before a new one is fetched. As a
preparatory step to this, this commit moves the call
to ssl_consume_current_message() from ssl_read_record_layer()
to the calling function mbedtls_ssl_read_record().
The first part of the function ssl_read_record_layer() was
to mark the previous message as consumed. This commit moves
the corresponding code-path to a separate static function
ssl_consume_current_message().
This function was previously global because it was
used directly within ssl_parse_certificate_verify()
in library/ssl_srv.c. The previous commit removed
this dependency, replacing the call by a call to
the global parent function mbedtls_ssl_read_record().
This renders mbedtls_ssl_read_record_layer() internal
and therefore allows to make it static, and accordingly
rename it as ssl_read_record_layer().
Usually, debug messages beginning with "=> and "<="
match up and indicate entering of and returning from
functions, respectively. This commit fixes one exception
to this rule in mbedtls_ssl_read_record(), which sometimes
printed two messages of the form "<= XXX".
Previously, mbedtls_ssl_read_record() always updated the handshake
checksum in case a handshake record was received. While desirable
most of the time, for the CertificateVerify message the checksum
update must only happen after the message has been fully processed,
because the validation requires the handshake digest up to but
excluding the CertificateVerify itself. As a remedy, the bulk
of mbedtls_ssl_read_record() was previously duplicated within
ssl_parse_certificate_verify(), hardening maintenance in case
mbedtls_ssl_read_record() is subject to changes.
This commit adds a boolean parameter to mbedtls_ssl_read_record()
indicating whether the checksum should be updated in case of a
handshake message or not. This allows using it also for
ssl_parse_certificate_verify(), manually updating the checksum
after the message has been processed.
This for example lead to the following corner case bug:
The code attempted to piggy-back a Finished message at
the end of a datagram where precisely 12 bytes of payload
were still available. This lead to an empty Finished fragment
being sent, and when mbedtls_ssl_flight_transmit() was called
again, it believed that it was just starting to send the
Finished message, thereby calling ssl_swap_epochs() which
had already happened in the call sending the empty fragment.
Therefore, the second call would send the 'rest' of the
Finished message with wrong epoch.
This commit adds four tests to ssl-opt.sh running default
DTLS client and server with and without datagram packing
enabled, and checking that datagram packing is / is not
used by inspecting the debug output.
