The corner case tests were designed for 32 and 64 bit limbs
independently and performed only on the target platform. On the other
platform they are not corner cases anymore, but we can still exercise
them.
The corner case tests were designed for 64 bit limbs and failed on 32
bit platforms because the numbers in the test ended up being stored in a
different number of limbs and the function (correctly) returnd an error
upon receiving them.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing it. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Since the addition of mbedtls_ctr_drbg_set_nonce_len(),
the second call to mbedtls_ctr_drbg_seed() uses a nonsensical value as
the entropy nonce length.
Calling free() and seed() with no intervening init fails when
MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid mutex
representation.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Calling free() and seed() with no intervening init fails
when MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid
mutex representation. So add the missing free() and init().
The default entropy nonce length is either zero or nonzero depending
on the desired security strength and the entropy length.
The implementation calculates the actual entropy nonce length from the
actual entropy length, and therefore it doesn't need a constant that
indicates the default entropy nonce length. A portable application may
be interested in this constant, however. And our test code could
definitely use it.
Define a constant MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN and use it in
test code. Previously, test_suite_ctr_drbg had knowledge about the
default entropy nonce length built in and test_suite_psa_crypto_init
failed. Now both use MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN.
This change means that the test ctr_drbg_entropy_usage no longer
validates that the default entropy nonce length is sensible. So add a
new test that checks that the default entropy length and the default
entropy nonce length are sufficient to ensure the expected security
strength.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
cleanup failed, in particular if a sanitizer reported a memory leak.
Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.
FixARMmbed/mbed-crypto#303
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
