These tests are trivial except when compiling with MBEDTLS_THREADING_C
and a mutex implementation that are picky about matching each
mbedtls_mutex_init() with exactly one mbedtls_mutex_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If the mutex usage verification framework is enabled and it detects a
mutex usage error, report this error and mark the test as failed.
This detects most usage errors, but not all cases of using
uninitialized memory (which is impossible in full generality) and not
leaks due to missing free (which will be handled in a subsequent commit).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using pthread mutexes (MBEDTLS_THREADING_C and
MBEDTLS_THREADING_PTHREAD enabled), and when test hooks are
enabled (MBEDTLS_TEST_HOOKS), set up wrappers around the
mbedtls_mutex_xxx abstraction. In this commit, the wrapper functions
don't do anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some functions were not deinitializing the PSA subsystem. This could
lead to resource leaks at the level of individual test cases, and
possibly at the level of the whole test suite depending on the order
and selection of test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make USE_PSA_INIT() and USE_PSA_DONE() available in all test suites in
all cases, doing nothing if MBEDTLS_USE_PSA_CRYPTO is disabled. Use
those in preference to having explicit
defined(MBEDTLS_USE_PSA_CRYPTO) checks (but there may still be places
left where using the new macros would be better).
Also provide PSA_INIT() by symmetry with PSA_DONE(), functional
whenver MBEDTLS_PSA_CRYPTO_C is enabled, but currently unused.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A temporary hack: at the time of writing, not all dependency symbols
are implemented yet. Skip test cases for which the dependency symbols are
not available. Once all dependency symbols are available, this comit
should be reverted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_TYPE_RAW_DATA and PSA_KEY_TYPE_DERIVE are always supported.
Make this explicit by declaring PSA_WANT_KEY_TYPE_RAW_DATA and
PSA_WANT_KEY_TYPE_DERIVE unconditionally. This makes it easier to
infer dependencies in a systematic way.
Don't generate not-supported test cases for those key types. They
would always be skipped, which is noise and would make it impossible
to eventually validate that all test cases pass in at least one
configuration over the whole CI.
Don't remove the exception in set_psa_test_dependencies.py for now, to
get less noise in dependencies. This may be revised later if it is
deemed more important to be systematic.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ECC curve dependency symbols include the key size in addition to the
curve family. Tweak the dependencies once the key size is known.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test data file is automatically generated. We could do that as
part of the build, since the only requirement is Python and we have a
requirement on Python to build tests anyway (to generate the .c file
from the .function file). However, committing the generating file into
the repository has less impact on build scripts, and will be necessary
for some of the files generated by generate_psa_tests.py (at least the
storage format stability tests, for which stability is guaranteed by
the fact that the generated file doesn't change). To keep things
simple, for now, let's commit all the files generated by
generate_psa_tests.py into the repository.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To start with, test that key creation fails as intended when the key
type is not supported. This commit only covers psa_import_key and
psa_generate_key. A follow-up will cover psa_key_derivation_output_key.
My primary intent in creating this new test suite is to automatically
generate test cases by enumerating the key types and algorithms that
the library supports. But this commit only adds a few manually written
test cases, to get the ball rolling.
Move the relevant test cases of test_suite_psa_crypto.data that only
depend on generic knowledge about the API. Keep test cases that depend
more closely on the implementation, such as tests of non-supported key
sizes, in test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that the support for key generation in the transparent
test driver is at the same level as the support in the
Mbed TLS library, remove the restriction on the generate
key test case that was introduced by the work on key
import and export through the PSA driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a test in test_suite_psa_crypto_driver_wrappers that
when accelerators do not support the generation of a key
and there is no software fallback, the key generation
fails with the PSA_ERROR_NOT_SUPPORTED error code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Add macros to skip a test case when hitting a
common alternative implementation limitation.
Add a macro for AES-192 and GCM with a nonce
length different from 12 bytes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Make sure MBEDTLS_PSA_CRYPTO_CLIENT is defined
when MBEDTLS_PSA_CRYPTO_C is defined and guard
PSA client code only with MBEDTLS_PSA_CRYPTO_CLIENT.
The definition of MBEDTLS_PSA_CRYPTO_CLIENT is done
in crypto_types.h before the definition of
psa_key_attributes_t. That way as PSA crypto client
code is related to key attributes we can be quite
confident that MBEDTLS_PSA_CRYPTO_CLIENT will be
defined when needed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move test macros previously located in `suites/helpers.function` to
`include/test/macros.h`. This makes these test infrastructure macros
available for use in other parts of the test infrastructure at compile
time as opposed to run time.
This commit is a simple cut and paste from one file to the other.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the source address and the frame counter have the expected
length. Otherwise, if the test data was invalid, the test code could
build nonsensical inputs, potentially overflowing the iv buffer.
The primary benefit of this change is that it also silences a warning
from compiling with `gcc-10 -O3` (observed with GCC 10.2.0 on
Linux/amd64). GCC unrolled the loops and complained about a buffer
overflow with warnings like:
```
suites/test_suite_ccm.function: In function 'test_mbedtls_ccm_star_auth_decrypt':
suites/test_suite_ccm.function:271:15: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
271 | iv[i] = source_address->x[i];
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~
suites/test_suite_ccm.function:254:19: note: at offset [13, 14] to object 'iv' with size 13 declared here
254 | unsigned char iv[13];
```
Just using memcpy instead of loops bypasses this warnings. The added
checks are a bonus.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function generate_random allocated a few extra bytes after
the expected output and checked that these extra bytes were not
overwritten. Memory sanity checks such as AddressSanitizer and
Valgrind already detect this kind of buffer overflow, so having this
test in our code was actually redundant. Remove it.
This has the benefit of not triggering a build error with GCC
(observed with 7.5.0 and 9.3.0) when ASan+UBSan is enabled: with the
previous code using trail, GCC complained about an excessively large
value passed to calloc(), which was (size_t)(-sizeof(trail)).
Thus this commit fixes#4122.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test random generation as a whole. This is different from
test_suite_*_drbg and test_suite_entropy, which respectively test PRNG
modules and entropy collection.
Start with basic tests: good-case tests, and do it twice and compare
the results to validate that entropy collection doesn't repeat itself.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Both tests do not require a lot of RAM, even though it may seem
like it at first sight. The derivation output is generated blockwise
from the KDF function, which only keeps state amounting to a couple
of blocks of the underlying hash primitive at a time.
There is never an allocation to keep the full derivation capacity in
memory...
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add doxygen style documentation to `mbedtls_test_fail`, `mbedtls_test_skip`,
`mbedtls_test_set_step` and `mbedtls_test_info_reset`. This should make it
easier to understand how the test infrastructure is used.
Also make some minor style changes to meet the coding standards and make it
more obvious that `mbedtls_test_info.step` was being incremented.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a new function `mbedtls_test_info_reset()` to remove direct writes to
`mbedtls_test_info`. This change still allows values to be read directly
however all writes are now done inside of `helpers.c`.
Also slightly reordered code to make it easier to read.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
