Use psa_generate_random() to generate IVs instead of
mbedtls_psa_get_random(). mbedtls_psa_get_random() is
meant to be used as the f_rng argument of Mbed TLS
library functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Symmetric key management is not intended to be
delegated to drivers. Thus, key management code
for a given symmetric key type should be included
in the library whether or not the support for
cryptographic operations based on that type of
symmetric key may be delegated to drivers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Isolate the Mbed TLS cipher driver interfaces.
Do the actual cipher operations in utility
functions that are just called by the interface
functions.
The utility functions are intended to be also called
by the cipher test driver interface functions (to be
introduced subsequently) and allow to test the case
where cipher operations are fully accelerated with no
fallback (component test_psa_crypto_config_basic of
all.sh).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As per drivers, pass to the Mbed TLS implementation of
the cipher multi-part operation its operation context
and not the PSA operation context.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move members that are of no use to the PSA crypto core
to the Mbed TLS implementation specific operation context.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For cipher multi-part operations, dispatch based on
the driver identifier even in the case of the
Mbed TLS software implementation (viewed as a driver).
Also use the driver identifier to check that an
cipher operation context is active or not.
This aligns the way hash and cipher multi-part
operations are dispatched.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change the operation context to the PSA one to be
able to call the software implementation from
the driver wrapper later on.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change the signature of
psa_driver_wrapper_cipher_encrypt/decrypt_setup to
that of a PSA driver cipher_encrypt/decrypt_setup
entry point.
Change the operation context to the PSA one to be
able to call the software implementation from
the driver wrapper later on.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Split out the cipher setup based on cipher.c
in psa_cipher_setup_internal() whose signature
is that of a PSA driver cipher_setup entry
point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rework psa_cipher_setup in preparation of
calling the cipher setup based on cipher.c
through the interface of a PSA driver
cipher_setup entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add psa_crypto_cipher.[ch] files to contain the
Mbed TLS implementation of PSA driver cipher driver
entry points.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To run succesfully the test
"PSA sign: invalid algorithm for ECC key" of
test_suite_psa_crypto when ECDSA support is not included
in the library, always return INVALID_ARGUMENT
in case of an ECC key not used for ECDSA, whether
ECDSA support is present or not.
Then apply the same logic to RSA sign RSA and RSA/ECC
verify for the sake of consistency.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add missing PSA_WANT_CCM/GCM/CMAC. This completes
the set of PSA_WANT config options given the
current support of PSA crypto in Mbed TLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
If an elliptic curve was enabled in the Mbed TLS classic API (#define
MBEDTLS_ECP_DP_xxx), but not enabled in the PSA configuration (#define
PSA_WANT_ECC_xxx), it would still work if you tried to use it through
PSA.
This is generally benign, but could be a security issue if you want to
disable a curve in PSA for some security reason (such as a known bug
in its implementation, which may not matter in the classic API if Mbed
TLS is running in a secure enclave and is only reachable from
untrusted callers through the PSA API). More urgently, this broke
test_suite_psa_crypto_not_supported.generated.
So if a curve is not enabled in the PSA configuration, ensure that
it's treated as unsupported through the PSA software implementation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Return PSA_ERROR_INVALID_HANDLE instead of
PSA_ERROR_DOES_NOT_EXIST if invalid key is passed for some key
operations.
Signed-off-by: Maulik Patel <Maulik.Patel@arm.com>
The hash driver entry points (and consequentially the hash driver core)
are now always compiled on when PSA_CRYPTO_DRIVER_TEST is turned on.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The PSA Core is already calling psa_hash_abort, so the driver doesn't
have to do that explicitly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Drivers (both built-in and external) need to declare their context
structures in a way such that they are accessible by the
to-be-autogenerated crypto_driver_contexts.h file. That file lives in
include/psa, which means all builtin driver context structure
declarations also need to live in include/psa.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
MinGW and older windows compilers cannot cope with %zu or %lld (there is
a workaround for MinGW, but it involves linking more code, there is no
workaround for Windows compilers prior to 2013). Attempt to work around
this by defining printf specifiers for size_t per platform for the
compilers that cannot use the C99 specifiers.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This was a false positive caused by the compiler seeing the %08lx
specifiers and judging the output on that, rather than the numbers being
fed in. Given these are going to be maximum 32 bit numbers, then better
to use %08x, which keeps -Wformat-truncation=2 happy as well.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fixes for printf format specifiers, where they have been flagged as
invalid sizes by coverity, and new build flags to enable catching these
errors when building using CMake. Note that this patch uses %zu, which
requires C99 or later.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Printf could potentially produce 2 64 bit numbers here when there is
only space for one, thus causing a buffer overflow. This was caught by
the new warning flags.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
We were not getting any warnings on printf format errors, as we do not
explicitly use printf anywhere in the code. Thankfully there is a way
to mark a function as having printf behaviour so that its inputs can be
checked in the same way as printf would be.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Apply the right define guards for the right purpose. The 'core' hash
driver is included if any hash algorithm is either to be tested through
the test driver, or if it is requested by a user and not accelerated
(i.e. 'fallback'/'software' driver requested for the algorithm).
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Apparently there's a goal to make the PSA Crypto core free from
dynamic memory allocations. Therefore, all driver context structures
need to be known at compile time in order for the core to know their
final size.
This change defines & implements for hashing operations how the context
structures get defined.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mac size is previously checked to not be less than 4, so it can't be zero
anymore at this point.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Memsan build was reporting a false positive use of uninitialised memory
in x509_crt.c on a struct filled by an _stat function call. According to
the man pages, the element reported has to be filled in by the call, so
to be safe, and keep memsan happy, zero the struct first.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix function mbedtls_ecp_mul_shortcuts() to skip multiplication when m
is 0 and simply assignt 0 to R. Additionally fix ecjpake_zkp_read() to
return MBEDTLS_ERR_ECP_INVALID_KEY when the above condintion is met.
Fix#1792
Signed-off-by: TRodziewicz <rodziewicz@gmail.com>
When ECDSA is not supported by the library, prefer
to return NOT_SUPPORTED than INVALID_ARGUMENT when
asked for an ECDSA signature.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move the check that ECDSA is supported from the
caller of the function responsible for Mbed TLS
ECDSA signatures to this function, namely
mbedtls_psa_ecdsa_sign_hash().
This makes the caller code more readable and is
more aligned with what is expected from a
sign_hash() PSA driver entry point.
Add a negative test case where a deterministic
ECDSA signature is requested while the library
does not support deterministic ECDSA.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reworked the validation of MAC algorithm with the used key type by
introducing psa_mac_key_can_do, which guarantees that PSA_MAC_LENGTH can
be called successfully after validation of the algorithm and key type.
This means psa_get_mac_output_length is no longer required.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Multiplication is not constant flow on any CPU we are generally
targetting, so replace this with bit twiddling.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Comparing algorithm with its FULL_LENGTH_MAC version doesn't work in
cases where algorithm is a wildcard. Wildcard input is not specified in
the documentation of the function, but in order to test the function
using the same test as PSA_MAC_LENGTH we're mimicking that behaviour here.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Avoid code duplication. Also update the guarantees made by the function
doc to match the guarantees given by PSA_MAC_LENGTH.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This makes it more in-line with how psa_key_policy_permits works. It
also adds consistency: the intersection of MAC with default length and
MAC with exact-length is now computed correctly in case the exact length
equals the default length of the algorithm when used with the given
key type.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout() when given a file descriptor that is beyond
FD_SETSIZE. The bug was due to not checking that the file descriptor
is within the range of an fd_set object.
Fix#4169
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although the library documentation does not guarantee that calling
mbedtls_entropy_free() twice works, it's a plausible assumption and it's
natural to write code that frees an object twice. While this is uncommon for
an entropy context, which is usually a global variable, it came up in our
own unit tests (random_twice tests in test_suite_random).
Announce this in the same changelog entry as for RSA because it's the same
bug in the two modules.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_rsa_gen_key() was not freeing the RSA object, and specifically
not freeing the mutex, in some error cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When MBEDTLS_THREADING_C is enabled, RSA code protects the use of the
key with a mutex. mbedtls_rsa_free() frees this mutex by calling
mbedtls_mutex_free(). This does not match the usage of
mbedtls_mutex_free(), which in general can only be done once.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_hmac_drbg_free() left a mutex in the initialized state. This
caused a resource leak on platforms where mbedtls_mutex_init()
allocates resources.
To fix this, mbedtls_hmac_drbg_free() no longer reinitializes the
mutex. To preserve the property that mbedtls_hmac_drbg_free() leaves
the object in an initialized state, which is generally true throughout
the library except regarding mutex objects on some platforms, no
longer initialize the mutex in mbedtls_hmac_drbg_init(). Since the
mutex is only used after seeding, and seeding is only permitted once,
call mbedtls_mutex_init() as part of the seeding process.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ctr_drbg_free() left a mutex in the initialized state. This
caused a resource leak on platforms where mbedtls_mutex_init()
allocates resources.
To fix this, mbedtls_ctr_drbg_free() no longer reinitializes the
mutex. To preserve the property that mbedtls_ctr_drbg_free() leaves
the object in an initialized state, which is generally true throughout
the library except regarding mutex objects on some platforms, no
longer initialize the mutex in mbedtls_ctr_drbg_init(). Since the
mutex is only used after seeding, and seeding is only permitted once,
call mbedtls_mutex_init() as part of the seeding process.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document the usage inside the library, and relate it with how it's
additionally used in the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Change psa_ecdsa_sign/verify signature to that of
a sign/verify_hash driver entry point before to
move them to the psa_crypto_ecp.c ECP specific file.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change psa_rsa_sign/verify signature to that of
a sign/verify_hash driver entry point before to
move them to the psa_crypto_rsa.c RSA specific file.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change psa_driver_wrapper_sign/verify_hash signature
to that of a sign/verify_hash driver entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Wrap sign/verify_hash software implementation into
psa_sign/verify_hash_internal() functions whose
signature is that of a sign/verify_hash driver
entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change the psa_crypto use of the CHACHA20 cipher to also use the new
MBEDTLS_PSA_BUILTIN_KE_TYPE_CHACHA20.
Signed-off-by: David Brown <david.brown@linaro.org>
Change a few conditionals in the psa library to be based on the
MBEDTLS_PSA_BUILTIN_KEY_TYPE_DES instead of the WANT macros. Future
additions of HW acceleration will need to be mindful of these
definitions if any of this code is needed in those instances.
Signed-off-by: David Brown <david.brown@linaro.org>
When converting definitions to use the new PSA defines, one erroneously
was conditionalized on the WANT macro instead of on the BUILTIN macro.
Signed-off-by: David Brown <david.brown@linaro.org>
There are a few instances of MBEDTLS_*_C (specifically for DES) in
psa_crypto.c. Change to the PSA_WANT_KEY_TYPE_DES macros to reflect the
new PSA crypto config.
Signed-off-by: David Brown <david.brown@linaro.org>
This file will always be used with the PSA configurations, so use the
MBEDTLS_PSA_BUILTIN... definitions for the symmetric cyphers.
Signed-off-by: David Brown <david.brown@linaro.org>
There was some intentional duplication between
library/psa_crypto_random_impl.h and include/mbedtls/psa_util.h, with
the intent that the compiler would complain if one file was edited in
a way that's incompatible with the other file. However, the two files
were never included together, and in fact could not be included
together because some definitions can't be duplicated (type, static
variable).
Now library/psa_crypto_random_impl.h includes
include/mbedtls/psa_util.h, so the compiler will check what it can.
There is less redundancy since it isn't always possible to declare
something twice (specifically, types can't be declared).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use PSA_EXPORT_KEY_OUTPUT_SIZE macro to compute the
size of the buffer to contain the generated key
instead of computing it alongside the key type and
size validation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When generating transparent keys, we need to be able
to compute the size of the key buffer whether the
key is generated by the Mbed TLS library or by an
accelerator. Thus, change the RSA/ECP
MBEDTLS_PSA_BUILTIN_... compilation guards with
their PSA_WANT_... counterparts.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change psa_generate_key_internal() signature to
that of a PSA driver generate_key entry point.
That way, this function can be called by the
driver wrapper when a software fallback is
necessary.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename and export get_key_buffer_size to be able to call
it from psa_crypto.c to compute the size of buffers to
contain keys generated by an opaque driver without
storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Restrict the scope of get_expected_key_size to
generation of key in a secure element or
cryptoprocessor without storage.
For transparent driver, the key buffer size calculation is
for the time being moved to psa_driver_wrapper_generate_key
and will eventually be done by psa_get_key_buffer_size.
Rename the function to get_key_buffer_size to
align its naming with that of psa_get_key_buffer_size.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In case of a secure element or cryptoprocessor with
storage, when generating a key, the key material is
not exported from the secure element or cryptoprocessor
thus there is no need to allocate a buffer in that case.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Preparatory commit to eventually change
psa_generate_key_internal() signature to that of
a PSA driver generate_key entry point.
To be able to change the signature, the buffer to
store the generated key has to be allocated before
the call to psa_generate_key_internal().
This commit moves the allocation and clean-up in
case of error of the buffer to store the generated
key from psa_generate_key_internal() to
psa_generate_key().
This has the nice benefit of factorizing the key
buffer allocation and clean-up.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Preparatory commit to eventually change
psa_generate_key_internal() signature to that of
a PSA driver generate_key entry point.
To be able to change the signature, the buffer to
store the key has to be allocated before the call
to psa_generate_key_internal() thus its size has
to be calculed beforehand as well.
This is the purpose of this commit: to move the
computation of the key size in bytes out of
psa_generate_key_internal().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Small improvements to psa_generate_key_internal()
implementation:
. declare only once the status local variable and
initialize it to PSA_ERROR_CORRUPTION_DETECTED
to improve robustness against FI attacks.
. remove an unnecessary assignment.
. use type local variable instead of its global
variable equivalent.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In psa_generate_derived_key_internal() an error case was returning
directly rather than jumping to the exit label, which meant that an
allocated buffer would not be free'd.
Found via coverity.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make sure MBEDTLS_PSA_CRYPTO_CLIENT is defined
when MBEDTLS_PSA_CRYPTO_C is defined and guard
PSA client code only with MBEDTLS_PSA_CRYPTO_CLIENT.
The definition of MBEDTLS_PSA_CRYPTO_CLIENT is done
in crypto_types.h before the definition of
psa_key_attributes_t. That way as PSA crypto client
code is related to key attributes we can be quite
confident that MBEDTLS_PSA_CRYPTO_CLIENT will be
defined when needed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add ECP/RSA transparent test driver import_key
entry point and use it in the transparent test
driver entry supporting both ECP and RSA.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
