Commit Graph

12343 Commits

Author SHA1 Message Date
Gilles Peskine
c0ace355a4 mbedtls_ctr_drbg_context: minor documentation improvements 2019-10-23 19:46:56 +02:00
Gilles Peskine
460988a472 fixup! CTR_DRBG: support set_entropy_len() before seed()
Remove a comment that documented a now-removed restriction.
2019-10-23 19:46:56 +02:00
Gilles Peskine
379561feff fixup! CTR_DRBG: support set_entropy_len() before seed()
Update a comment that referred to a now-removed function.
2019-10-23 19:46:56 +02:00
Gilles Peskine
9d3baea439 fixup! HMAC_DRBG: support set_entropy_len() before seed() 2019-10-23 19:46:55 +02:00
Jaeden Amero
b23abcb38d
Merge pull request #2898 from gilles-peskine-arm/asan-test-fail-development
Make sure Asan failures are detected in 'make test'
2019-10-22 16:30:28 +01:00
Gilles Peskine
ce35cb3cc7 'make test' must fail if Asan fails
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
  cleanup failed, in particular if a sanitizer reported a memory leak.

Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.

Fix ARMmbed/mbed-crypto#303
2019-10-21 20:10:21 +02:00
Gilles Peskine
5ca393f7b8 Asan make builds: avoid sanitizer recovery
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
2019-10-21 20:10:12 +02:00
Gilles Peskine
2558d30f93 Use UBsan in addition to Asan with 'make test'
When building with make with the address sanitizer enabled, also
enable the undefined behavior sanitizer.
2019-10-21 20:09:22 +02:00
Gilles Peskine
8fd5942229 Unify ASan options in make builds
Use a common set of options when building with Asan without CMake.
2019-10-21 20:09:13 +02:00
Gilles Peskine
54d1937433 Fix memory leak in some SE HAL tests 2019-10-21 19:18:22 +02:00
Gilles Peskine
8b5389f360 'make test' must fail if Asan fails
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
  cleanup failed, in particular if a sanitizer reported a memory leak.

Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.

Fix ARMmbed/mbed-crypto#303
2019-10-21 19:17:42 +02:00
Gilles Peskine
bfeed663d2 Asan make builds: avoid sanitizer recovery
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
2019-10-21 19:08:01 +02:00
Gilles Peskine
004206c7f5 Unify ASan options in make builds
Use a common set of options when building with Asan without CMake.
2019-10-21 17:13:45 +02:00
Gilles Peskine
dd61a2e3b8 Use the intended configuration in component_test_se_full 2019-10-21 15:58:20 +02:00
Gilles Peskine
ccfc5eaa81 Fix memory leak in some SE HAL tests 2019-10-21 15:57:51 +02:00
Jaeden Amero
b1c7197166
Merge pull request #299 from gilles-peskine-arm/drbg-set_entropy_len
Allow xxx_drbg_set_entropy_len before xxx_drbg_seed
2019-10-18 15:39:03 +01:00
Jaeden Amero
719ae74253
Merge pull request #2884 from AndrzejKurek/iotssl-2886-fix-parallel-make-jobs-2
Fix parallel make jobs for shared target
2019-10-18 14:18:55 +01:00
Gilles Peskine
150d577780
Merge pull request #292 from gilles-peskine-arm/psa-destroy_0
Make psa_close_key(0) and psa_destroy_key(0) succeed
2019-10-14 11:21:54 +02:00
Jaeden Amero
1b717c9278
Merge pull request #2887 from gilles-peskine-arm/update-crypto-20191011
Update crypto submodule
2019-10-14 09:19:07 +01:00
Gilles Peskine
581bfcfc96 Create seedfile in test-ref-configs.pl
config-symmetric-only.h enables MBEDTLS_ENTROPY_NV_SEED so it needs a
seedfile. Create it in test-ref-configs.pl so that the script works on
its own, even if it is not invoked by all.sh.
2019-10-11 18:21:08 +02:00
Gilles Peskine
b16841ee69 Fixed -Wunused warnings when building without asymmetric crypto 2019-10-11 18:21:08 +02:00
Gilles Peskine
fec306452b Add a reference configuration without any asymmetric cryptography
Add a reference configuration with most symmetric cryptographic
algorithms enabled, but without any asymmetric cryptography. This
checks that we don't have spurious unexpected dependencies on
asymmetric-only modules such as bignum.

Keep HAVE_ASM disabled because it's platform-specific.

Keep HAVEGE disabled because it's untested and not recommended.

Keep MEMORY_BUFFER_ALLOC out because it isn't related to cryptography
at all and it makes memory sanitizers ineffective.

Keep THREADING disabled because it requires special build options.
2019-10-11 18:21:08 +02:00
Gilles Peskine
50ed86b6b9 CTR_DRBG: support set_entropy_len() before seed()
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().

This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
2019-10-11 18:04:12 +02:00
Gilles Peskine
8bf5613336 CTR_DRBG: Don't use functions before they're defined
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
2019-10-11 18:04:12 +02:00
Gilles Peskine
8f7921ec4b HMAC_DRBG: support set_entropy_len() before seed()
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
2019-10-11 18:04:12 +02:00
Gilles Peskine
e601625b96 Update crypto submodule
* #272: Insert doxygen comments on old algorithms so they appear in PSA documentation
* #285: SE driver: make persistent data work
* #279: Include IANA reference in the definition of ECC curves and DH groups
* #287: DRBG documentation improvements
* #297: Fix int overflow in mbedtls_asn1_get_int (Credit to OSS-Fuzz)
2019-10-11 17:37:02 +02:00
Gilles Peskine
3cdb3da3a0
Merge pull request #297 from gilles-peskine-arm/asn1_get_int-undefined_shift
Fix int overflow in mbedtls_asn1_get_int
2019-10-11 17:31:16 +02:00
Gilles Peskine
e5e9081b76
Merge pull request #287 from gilles-peskine-arm/ctr_drbg-doc-nist-crypto
DRBG documentation improvements
2019-10-11 16:57:45 +02:00
Jaeden Amero
cb5fa8b4bd
Merge pull request #279 from athoelke/at-fix262
Include IANA reference in the definition of ECC curves and DH groups
2019-10-11 14:03:18 +01:00
Gilles Peskine
b8cde4ec03 Consolidate invalid-handle tests
Consolidate the invalid-handle tests from test_suite_psa_crypto and
test_suite_psa_crypto_slot_management. Start with the code in
test_suite_psa_crypto_slot_management and adapt it to test one invalid
handle value per run of the test function.
2019-10-11 11:44:48 +02:00
Gilles Peskine
37570e8152 mbedtls_asn1_get_int: fix int overflow
Fix a signed int overflow in mbedtls_asn1_get_int() for numbers
between INT_MAX+1 and UINT_MAX (typically 0x80000000..0xffffffff).
This was undefined behavior which in practice would typically have
resulted in an incorrect value, but which may plausibly also have
caused the postcondition (*p == initial<*p> + len) to be violated.

Credit to OSS-Fuzz.
2019-10-10 19:29:27 +02:00
Gilles Peskine
9fd9794d10 mbedtls_asn1_get_int: explain the logic
No behavior change.
2019-10-10 19:27:53 +02:00
Gilles Peskine
0370b1bd7d ASN1 tests: more INTEGER test cases
Test more INTEGER values, especially near the boundary of int (which
is at 2^31-1 on all our officially supported platforms).
2019-10-10 19:25:39 +02:00
Gilles Peskine
970dcbf453 ASN1 tests: Match negative INTEGERs with the actual library behavior
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on negative INTEGERs (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Change
the test function to the library behavior.

Fix the test data with negative INTEGERs. These test cases were
previously not run (they were introduced but deliberately deactivated
in 27d806fab4). The test data was
actually wrong: ASN.1 uses two's complement, which has no negative 0,
and some encodings were wrong. Now the tests have correct data, and
the test code rectifies the expected data to match the library
behavior.
2019-10-10 19:21:12 +02:00
Gilles Peskine
321adb297c ASN1 tests: Match "Empty INTEGER" with the actual library behavior
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on an empty INTEGER (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Write
a test function that matches the library behavior.
2019-10-10 19:18:21 +02:00
Gilles Peskine
03c165e1e1 Fix the build and the tests when MBEDTLS_BIGNUM_C is unset
When the asn1parse module is enabled but the bignum module is
disabled, the asn1parse test suite did not work. Fix this.

* Fix a syntax error in get_integer() (label immediately followed by a
  closing brace).
* Fix an unused variable in get_integer().
* Fix `TEST_ASSERT( *p == q );` in nested_parse() failing because `*p`
  was not set.
* Fix nested_parse() not outputting the length of what it parsed.
2019-10-10 19:15:18 +02:00
Gilles Peskine
36029387de
Merge pull request #285 from gilles-peskine-arm/psa-se_driver-validate_save_persistent
SE driver: make persistent data work
2019-10-09 18:35:33 +02:00
Gilles Peskine
1bbe284d63
Merge pull request #272 from adrianlshaw/document_old_algs
Insert doxygen comments on old algorithms so they appear in PSA documentation
2019-10-09 17:18:11 +02:00
Gilles Peskine
43326f0d1e Change PSA_DH_GROUP_CUSTOM to not be in the vendor-defined range 2019-10-09 16:43:39 +02:00
Gilles Peskine
04129a0d96 Update slot management tests now that {close,destroy}_key(0) succeed 2019-10-09 16:23:49 +02:00
Andrzej Kurek
8028cb19f4 Makefile: add path prefixes to other versions of libmbedcrypto library 2019-10-08 10:10:43 -04:00
Gilles Peskine
cb25cdd53a Add ECDSA tests with hash and key of different lengths
Add some ECDSA test cases where the hash is shorter or longer than the
key length, to check that the API doesn't enforce a relationship
between the two.

For the sign_deterministic tests, the keys are
tests/data_files/ec_256_prv.pem and tests/data_files/ec_384_prv.pem
and the signatures were obtained with Python Cryptodome:

from binascii import hexlify, unhexlify
from Crypto.Hash import SHA256, SHA384
from Crypto.PublicKey import ECC
from Crypto.Signature import DSS
k2 = ECC.import_key(unhexlify("3077020101042049c9a8c18c4b885638c431cf1df1c994131609b580d4fd43a0cab17db2f13eeea00a06082a8648ce3d030107a144034200047772656f814b399279d5e1f1781fac6f099a3c5ca1b0e35351834b08b65e0b572590cdaf8f769361bcf34acfc11e5e074e8426bdde04be6e653945449617de45"))
SHA384.new(b'hello').hexdigest()
hexlify(DSS.new(k2, 'deterministic-rfc6979').sign(SHA384.new(b'hello')))
k3 = ECC.import_key(unhexlify("3081a402010104303f5d8d9be280b5696cc5cc9f94cf8af7e6b61dd6592b2ab2b3a4c607450417ec327dcdcaed7c10053d719a0574f0a76aa00706052b81040022a16403620004d9c662b50ba29ca47990450e043aeaf4f0c69b15676d112f622a71c93059af999691c5680d2b44d111579db12f4a413a2ed5c45fcfb67b5b63e00b91ebe59d09a6b1ac2c0c4282aa12317ed5914f999bc488bb132e8342cc36f2ca5e3379c747"))
SHA256.new(b'hello').hexdigest()
hexlify(DSS.new(k3, 'deterministic-rfc6979').sign(SHA256.new(b'hello')))
2019-10-08 16:05:02 +02:00
Gilles Peskine
1841cf43ee Make psa_close_key(0) and psa_destroy_key(0) succeed 2019-10-08 15:57:27 +02:00
Gilles Peskine
f102e4e4f6 Test that psa_close_key(0) and psa_destroy_key(0) succeed 2019-10-08 15:57:27 +02:00
Gilles Peskine
2493401af4 Document that psa_close_key(0) and psa_destroy_key(0) succeed
Document that passing 0 to a close/destroy function does nothing and
returns PSA_SUCCESS.

Although this was not written explicitly, the specification strongly
suggested that this would return PSA_ERROR_INVALID_HANDLE. While
returning INVALID_HANDLE makes sense, it was awkward for a very common
programming style where applications can store 0 in a handle variable
to indicate that the handle has been closed or has never been open:
applications had to either check if (handle != 0) before calling
psa_close_key(handle) or psa_destroy_key(handle), or ignore errors
from the close/destroy function. Now applications following this style
can just call psa_close_key(handle) or psa_destroy_key(handle).
2019-10-08 15:43:13 +02:00
Gilles Peskine
0d50d41c92
Merge pull request #2882 from gilles-peskine-arm/update-crypto-20191004
Update crypto submodule:

* https://github.com/ARMmbed/mbed-crypto/pull/277: Improve speed of PBKDF2 by caching the digest state of the passphras
* https://github.com/ARMmbed/mbed-crypto/pull/269: Add PSA API versioning
* https://github.com/ARMmbed/mbed-crypto/pull/278: Fix on target test issues
* https://github.com/ARMmbed/mbed-crypto/pull/286: Fix defgroup syntax for API version section
* https://github.com/ARMmbed/mbed-crypto/pull/75: ASN.1 tests without x509
2019-10-08 15:34:11 +02:00
Andrew Thoelke
6e59505bb2 Recommend use of GREASE values for vendor defined DH groups 2019-10-07 22:27:17 +01:00
Andrew Thoelke
691ec52694 Remove over-specific RFC references
Rely on general reference to IANA documentation
2019-10-07 15:28:36 +01:00
Gilles Peskine
e249c0e6b3 config.pl full: exclude MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
This is a variant toggle, not an extra feature, so it should be tested
separately.
2019-10-07 15:57:50 +02:00
Andrzej Kurek
232e8f959a Enable parallel shared target tests
Now that the dependency issues for shared target are fixed, the feature can be
enabled in tests.
2019-10-07 09:24:43 -04:00