In builds enabling only a single MD digest, we want to be able to
implement the MD info getter functions by returning compile-time
constants matching the fields of the MD info structures used so far.
To avoid information duplication hardening maintainability, this
commit introduces the possibility of providing the various aspects
of a particular digest implementation by defining macros
MBEDTLS_MD_INFO_DIGEST_FIELD (e.g. MBEDTLS_MD_INFO_SHA256_SIZE)
and to generate the corresponding mbedtls_md_info instance from
this set of macros, via the new macro MBEDTLS_MD_INFO().
This way, we'll be able to switch between MD info based builds
and single-digest builds without information duplication.
This commit continues the introduction of the MD digest implementation
abstraction layer given by `mbedtls_md_handle_t` by adding getter
functions returning the various properties of an implementation
(e.g. name, digest type, digest size). For the existing implementation,
these are just structure field accesses; however, in configurations
hardcoding the choice of a fixed digest algorithm, we'll be able to
implement them as inline functions returning compile-time constants.
As has been previously done for ciphersuites, this commit introduces
a zero-cost abstraction layer around the type
mbedtls_md_info const *
whose valid values represent implementations of message digest algorithms.
Access to a particular digest implementation can be requested by name or
digest ID through the API mbedtls_md_info_from_xxx(), which either returns
a valid implementation or NULL, representing failure.
This commit replaces such uses of `mbedtls_md_info const *` by an abstract
type `mbedtls_md_handle_t` whose valid values represent digest implementations,
and which has a designated invalid value MBEDTLS_MD_INVALID_HANDLE.
The purpose of this abstraction layer is to pave the way for builds which
support precisely one digest algorithm. In this case, mbedtls_md_handle_t
can be implemented as a two-valued type, with one value representing the
invalid handle, and the unique valid value representing the unique enabled
digest.
Cookies are fully opaque so we can change the hash used at any time, it's not
part of the API.
The cookie module handles truncation, so it's simpler to always use SHA-256
rather than check if SHA-224 is available.
No need to play tricks with macros and functions depending on whether
SHA256_SMALLER is enabled or not, with a static inline function all common
compilers (tested with arm-gcc, armcc5, arm-clang) will Do The Right Thing
depending on whether we told them to optimize for size or speed.
The TinyCrypt PK signature wrapper uses ASN.1 writing functions
for length and tag, accounting for the only dependency of the
baremetal build on ASN.1 writing.
Since all lengths to be encoded are below 128 Bytes and are hence
ASN.1 encoded as single Bytes, the dependency on ASN.1 writing can
be removed at low complexity by writing the length and tags directly.
Extend scope of TC in ECDH-param extraction from CRT
Previously, TinyCrypt was only used for ECDHE-ECDSA/RSA ciphersuites.
This commit is a step towards using it for _all_ ciphersuites involving
ECDHE (specifically: ECDHE, ECDHE-PSK, static ECDH), extending the scope
of the use of TinyCrypt in the writing of the ClientKeyExchange message.
Extend scope of TC in ECDH-param extraction from CRT
Previously, TinyCrypt was only used for ECDHE-ECDSA/RSA ciphersuites.
This commit is a step towards using it for _all_ ciphersuites involving
ECDHE (specifically: ECDHE, ECDHE-PSK, static ECDH), extending the scope
of the use of TinyCrypt in the parsing of the ServerKeyExchange message.
Previously, TinyCrypt was only used for ECDHE-ECDSA/RSA ciphersuites.
This commit is a step towards using it for _all_ ciphersuites involving
ECDHE (specifically: ECDHE, ECDHE-PSK, static ECDH), extending the scope
of the use of TinyCrypt in the parsing of the ClientKeyExchange message.
Previously, TinyCrypt was only used for ECDHE-ECDSA/RSA ciphersuites.
This commit is a step towards using it for _all_ ciphersuites involving
ECDHE (specifically: ECDHE, ECDHE-PSK, static ECDH), extending the scope
of the use of TinyCrypt in the writing of the ServerKeyExchange message.
Extend scope of TC in ECDH-param extraction from CRT
Previously, TinyCrypt was only used for ECDHE-ECDSA/RSA ciphersuites.
This commit is a step towards using it for _all_ ciphersuites involving
ECDHE (specifically: ECDHE, ECDHE-PSK, static ECDH), extending the scope
of the use of TinyCrypt in the assembly of the PMS.
mbedtls/ecp.h defines constants
MBEDTLS_ECP_PF_UNCOMPRESSED
MBEDTLS_ECP_PF_COMPRESSED
MBEDTLS_ECP_TLS_NAMED_CURVE
which regard the encoding of elliptic curves and curve point formats in TLS.
As such, they should be defined in the SSL namespace. Asides, this will help
replacing the legacy ECC crypto by alternative ECC implementations.
PEM-encoded keys with PEM header
-----BEGIN EC PRIVATE KEY-----
...
-----END EC PRIVATE KEY-----
were previously not parsed in configurations using TinyCrypt
instead of legacy ECC crypto.
The PK type MBEDTLS_PK_ECDSA is never returned from
`mbedtls_pk_info_from_type()`. Instead, EC keys either
are identified as MBEDTLS_PK_ECKEY_DH (in case they
must only be used for ECDHE) or MBEDTLS_PK_ECKEY (in
case they can be used for any algorithm).
With TinyCrypt and legacy ECC mutually exclusive, we don't have
to use #if TINYCRYPT #else #if LEGACY #endif #endif anymore, but
can add the TC and legacy based ECC implementations independently.
- TinyCrypt uses `0` for errors.
- The first argument to uECC_verify() should be the public key,
but the previous code passed the beginning of the entire
private-public key structure.
The PK-type MBEDTLS_PK_ECDSA isn't really used by the library.
Especially, when parsing a generic EC key, a PK context of type
MBEDTLS_PK_ECKEY will be requested. Hence, to drop in TinyCrypt
for the legacy-ECC implementation, the PK type that TinyCrypt
implements must be MBEDTLS_PK_ECKEY.
The SSL context maintains a set of 'out pointers' indicating the
address at which to write the header fields of the next outgoing
record. Some of these addresses have a static offset from the
beginning of the record header, while other offsets can vary
depending on the active record encryption mechanism: For example,
if an explicit IV is in use, there's an offset between the end
of the record header and the beginning of the encrypted data to
allow the explicit IV to be placed in between; also, if the DTLS
Connection ID (CID) feature is in use, the CID is part of the
record header, shifting all subsequent information (length, IV, data)
to the back.
When setting up an SSL context, the out pointers are initialized
according to the identity transform + no CID, and it is important
to keep them up to date whenever the record encryption mechanism
changes, which is done by the helper function ssl_update_out_pointers().
During context deserialization, updating the out pointers according
to the deserialized record transform went missing, leaving the out
pointers the initial state. When attemping to encrypt a record in
this state, this lead to failure if either a CID or an explicit IV
was in use. This wasn't caught in the tests by the bad luck that
they didn't use CID, _and_ used the default ciphersuite based on
ChaChaPoly, which doesn't have an explicit IV. Changing either of
this would have made the existing tests fail.
This commit fixes the bug by adding a call to ssl_update_out_pointers()
to ssl_context_load() implementing context deserialization.
Extending test coverage is left for a separate commit.
* mbedtls-2.16: (21 commits)
Exclude DTLS 1.2 only with older OpenSSL
Document the rationale for the armel build
Switch armel build to -Os
Add a build on ARMv5TE in ARM mode
Add changelog entry for ARM assembly fix
bn_mul.h: require at least ARMv6 to enable the ARM DSP code
Changelog entry for test certificates update
Change worktree_rev to HEAD for rev-parse
Add ChangeLog entry for entropy_nv_seed test case fix
entropy_nv_seed: cope with SHA-256
entropy_nv_seed: clean up properly
Add ChangeLog entry for undefined behavior fix in test_suite_nist_kw
Don't call memset after calloc
Adapt ChangeLog
ECP restart: Don't calculate address of sub ctx if ctx is NULL
Update certificates to expire in 2029
Update soon to be expired crl
Test that a shared library build produces a dynamically linked executable
Test that the shared library build with CMake works
Add a test of MBEDTLS_CONFIG_FILE
...
The NO_INLINE annotation of tls_prf_sha256() and tls_prf_sha384() from
the last commit surprisingly had an influence on ARMC5 compilation in
that tls_prf_generic() was no longer automatically inlined into
tls_prf_sha256() if only the latter was enabled (and is the point
where tls_prf_generic() is called). This commit forces inlining
of tls_prf_generic() in this case.
Usually, compilers are clever enough to pick the best inlining
strategy, but in this instance, it appears that compiling on ARMC6,
the compilers inlines xxx_prf_yyy() and xxx_calc_finished_yyy()
even though it really shouldn't. Forbid inlining through the use
of __attribute__((noinline)).
Somehow, at least ARMC5 isn't able to recognize this automatically.
Since some of the arguments to ssl_populate_transform() are compile-
time constants in reduced configurations, inlining leads to slightly
shorter code.
This saves a few bytes in configurations where only one hash
is enabled, and configurations allowing multiple hashes probably
don't care about code-size anyway.
This function is called on client-only once the ciphersuite has
been chosen and it it is known which digest the client will need
for the handshake transcript throughout the handshake, and causes
all other unneeded handshake transcripts to be discontinued.
(On the server, we cannot call this function because we don't know
which hash the client will those in its CertificateVerify message).
However, the benefit of this call is marginal, since transcript hash
computation is negligible compared to asymmetric crypto, and moreover
the handshake transcript contexts for the unused digests are still
stored in the SSL handshake parameter structure and not freed until
the end of the handshake.
Finally, if we're running on a _really_ constrained client, there
will be only one hash function enabled anyway, and in this case
the checksum optimization has no effect.
This commit therefore removes checksum optimization altogether,
saving some code on constrained systems.
- a comment regarding the implementation of hmac_drbg_reseed_core()
was misplaced.
- add more references to the standard, and add details on how the
comments in the code refer to various parts of the standard.
Now function mbedtls_ssl_set_hostname is compile-time configurable
in config.h with define MBEDTLS_X509_REMOVE_HOSTNAME_VERIFICATION.
This affects to many x509 API's. See config.h for details.
According to SP800-90A, the DRBG seeding process should use a nonce
of length `security_strength / 2` bits as part of the DRBG seed. It
further notes that this nonce may be drawn from the same source of
entropy that is used for the first `security_strength` bits of the
DRBG seed. The present HMAC DRBG implementation does that, requesting
`security_strength * 3 / 2` bits of entropy from the configured entropy
source in total to form the initial part of the DRBG seed.
However, some entropy sources may have thresholds in terms of how much
entropy they can provide in a single call to their entropy gathering
function which may be exceeded by the present HMAC DRBG implementation
even if the threshold is not smaller than `security_strength` bits.
Specifically, this is the case for our own entropy module implementation
which only allows requesting at most 32 Bytes of entropy at a time
in configurations disabling SHA-512, and this leads to runtime failure
of HMAC DRBG when used with Mbed TLS' own entropy callbacks in such
configurations.
This commit fixes this by splitting the seed entropy acquisition into
two calls, one requesting `security_strength` bits first, and another
one requesting `security_strength / 2` bits for the nonce.
