This commit adds an error condition for bad user configurations
and updates the number of SSL module errors in error.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit uses the previously defined macro to uniformize
bounds checks in several places. It also adds bounds checks to
the ClientHello writing function that were previously missing.
Also, the functions adding extensions to the ClientHello message
can now fail if the buffer is too small or a different error
condition occurs, and moreover they take an additional buffer
end parameter to free them from the assumption that one is
writing to the default output buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds a macro for buffer bounds checks in the SSL
module. It takes the buffer's current and end position as the
first argument(s), followed by the needed space; if the
available space is too small, it returns an SSL_BUFFER_TOO_SMALL
error.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The ssl_cli.c:ssl_write_supported_elliptic_curves_ext()
function is compiled only if MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C
or MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED is defined which
implies that MBEDTLS_ECP_C is defined. Thus remove the
precompiler conditions on MBEDTLS_ECP_C in its code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The function mbedtls_mpi_sub_abs first checked that A >= B and then
performed the subtraction, relying on the fact that A >= B to
guarantee that the carry propagation would stop, and not taking
advantage of the fact that the carry when subtracting two numbers can
only be 0 or 1. This made the carry propagation code a little hard to
follow.
Write an ad hoc loop for the carry propagation, checking the size of
the result. This makes termination obvious.
The initial check that A >= B is no longer needed, since the function
now checks that the carry propagation terminates, which is equivalent.
This is a slight performance gain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was some confusion during review about when A->p[n] could be
nonzero. In fact, there is no need to set A->p[n]: only the
intermediate result d might need to extend to n+1 limbs, not the final
result A. So never access A->p[n]. Rework the explanation of the
calculation in a way that should be easier to follow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The function mpi_sub_hlp had confusing semantics: although it took a
size parameter, it accessed the limb array d beyond this size, to
propagate the carry. This made the function difficult to understand
and analyze, with a potential buffer overflow if misused (not enough
room to propagate the carry).
Change the function so that it only performs the subtraction within
the specified number of limbs, and returns the carry.
Move the carry propagation out of mpi_sub_hlp and into its caller
mbedtls_mpi_sub_abs. This makes the code of subtraction very slightly
less neat, but not significantly different.
In the one other place where mpi_sub_hlp is used, namely mpi_montmul,
this is a net win because the carry is potentially sensitive data and
the function carefully arranges to not have to propagate it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mpi_sub_hlp performs a subtraction A - B, but took parameters in the
order (B, A). Swap the parameters so that they match the usual
mathematical syntax.
This has the additional benefit of putting the output parameter (A)
first, which is the normal convention in this module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Let code analyzers know that this is deliberate. For example MSVC
warns about the conversion if it's implicit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mpi_montmul, an auxiliary function for modular
exponentiation (mbedtls_mpi_mod_exp) that performs Montgomery
multiplication, the last step is a conditional subtraction to force
the result into the correct range. The current implementation uses a
branch and therefore may leak information about secret data to an
adversary who can observe what branch is taken through a side channel.
Avoid this potential leak by always doing the same subtraction and
doing a contant-trace conditional assignment to set the result.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Separate out a version of mpi_safe_cond_assign that works on
equal-sized limb arrays, without worrying about allocation sizes or
signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reverts commit 2cc69fffcf.
A check was added in mpi_montmul because clang-analyzer warned about a
possibly null pointer. However this was a false positive. Recent
versions of clang-analyzer no longer emit a warning (3.6 does, 6
doesn't).
Incidentally, the size check was wrong: mpi_montmul needs
T->n >= 2 * (N->n + 1), not just T->n >= N->n + 1.
Given that this is an internal function which is only used from one
public function and in a tightly controlled way, remove both the null
check (which is of low value to begin with) and the size check (which
would be slightly more valuable, but was wrong anyway). This allows
the function not to need to return an error, which makes the source
code a little easier to read and makes the object code a little
smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
To find any files with a missing copyright declaration, use the following script:
# ========================
#!/bin/sh
# Find files with copyright declarations, and list their file extensions
exts=$(grep -Ril --exclude-dir .git 'Copyright.*Arm' | sed '
s/.*\./-name "*./
s/$/"/
' | sort -u | sed -n '
:l
N
$!bl
s/\n/ -o /gp
')
# Find files with file extensions that ususally include copyright extensions,
# but don't include a copyright declaration themselves.
eval "find -path './.git' -prune -o\
! -path './tests/data_files/format_pkcs12.fmt'\
! -path './programs/psa/psa_constant_names_generated.c'\
'(' $exts ')' -print" | xargs grep -Li 'Copyright.*Arm'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Similarly to the recently-added tests for dependencies on CTR_DRBG:
constrained environments will probably want only one DRBG module, and we
should make sure that tests pass in such a configuration.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Enable branch coverage output in basic_build_test.sh. This
includes enabling branch coverage output to the lcov make target,
which is disabled by default.
Signed-off-by: Dan Handley <dan.handley@arm.com>
People who prefer to rely on HMAC_DRBG (for example because they use it for
deterministic ECDSA and don't want a second DRBG for code size reasons) should
be able to build and run the tests suites without CTR_DRBG.
Ideally we should make sure the level of testing (SSL) is the same regardless
of which DRBG modules is enabled, but that's a more significant piece of work.
For now, just ensure everything builds and `make test` passes.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Running the entropy unit test creates a suitable seedfile, but this
only works due to the happy accident that no prior unit test needs one
(specifically, test_suite_entropy runs before test_suite_rsa). So
create one explicitly, both for robustness and to keep the script
closer to the version in development where the explicit seedfile
creation is required.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We're only interested in files that are committed and pushed to be
included in Mbed TLS, not in any other files that may be lying around.
So ask git for the list of file names.
This script is primarily intended to run on the CI, and there it runs
on a fresh Git checkout plus potentially some other checkouts or
leftovers from a previous part of the CI job. It should also run
reasonably well on developer machines, where there may be various
additional files. In both cases, git is available.
Ad hoc directory exclusions are no longer needed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Have an explicit list of exemptions for specific checks rather than
whitelisting files to check. Some checks, such as permissions, should
apply to all files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
