Mention explicitly that only DNS names are supported so far, and while at it
explain where the name is searched.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Replace the now-redundant internal curve type macros ECP_xxx by the
macros MBEDTLS_ECP__xxx_ENABLED which are declared in ecp.h.
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
Document that mbedtls_ecp_muladd and mbedtls_ecp_muladd_restartable
are only implemented on short Weierstrass curves.
Exclude these functions at build time if no short Weierstrass curve
is included in the build. Before, these functions failed to compile in
such a configuration.
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
Document in config.h, and enforce in check_config.h, that
MBEDTLS_ECDSA_C requires at least one short Weierstrass curve to be
enabled. A Montgomery curve is not enough.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The condition is a complex and repeated a few times. There were already some
inconsistencies in the repetitions as some of them forgot about DES.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
PSA_ALG_ECB_NO_PADDING came in to the PSA Crypto API spec v1.0.0, but
was not implemented yet in the mbed TLS implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
By convention, in the project, functions that have a
check or similar in the name return 0 if the check
succeeds, non-zero otherwise. Align with this for
mbedtls_ssl_chk_buf_ptr().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The case of MBEDTLS_ECP_RESTARTABLE isn't handled correctly yet: in that case
the DRBG instance should persist when resuming the operation. This will be
addressed in the next commit.
When both CTR_DRBG and HMAC_DRBG are available, CTR_DRBG is preferred since
both are suitable but CTR_DRBG tends to be faster and I needed a tie-breaker.
There are currently three possible cases to test:
- NO_INTERNAL_RNG is set -> tested in test_ecp_no_internal_rng
- it's unset and CTR_DRBG is available -> tested in the default config
- it's unset and CTR_DRBG is disabled -> tested in
test_ecp_internal_rng_no_ctr_drbg
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
This is to avoid confusion with the class of macros
MBEDTLS_SSL_PROTO_TLS1_X
which have an underscore between major and minor version number.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
TLS 1.3 record protection allows the addition of an arbitrary amount
of padding.
This commit introduces a configuration option
```
MBEDTLS_SSL_TLS13_PADDING_GRANULARITY
```
The semantics of this option is that padding is chosen in a minimal
way so that the padded plaintext has a length which is a multiple of
MBEDTLS_SSL_TLS13_PADDING_GRANULARITY.
For example, setting MBEDTLS_SSL_TLS13_PADDING_GRANULARITY to 1024
means that padded plaintexts will have length 1024, 2048, ..., while
setting it to 1 means that no padding will be used.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds an error condition for bad user configurations
and updates the number of SSL module errors in error.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Detected by Travis
https://travis-ci.org/github/ARMmbed/mbedtls/jobs/692213150
/home/travis/build/ARMmbed/mbedtls/include/mbedtls/x509_crt.h:333:
warning: argument 'make_copy' of command @param is not found in the
argument list of mbedtls_x509_crt_parse_der_with_ext_cb(mbedtls_x509_crt
*chain, const unsigned char *buf, size_t buflen, int no_copy,
mbedtls_x509_crt_ext_cb_t cb)
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
new name: mbedtls_x509_crt_parse_der_with_ext_cb
Co-authored-by: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Now that lifetimes have structures and secure element drivers handle
all the lifetimes with a certain location, update driver registration
to take a location as argument rather than a lifetime.
This commit updates the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that lifetimes have structures and secure element drivers handle
all the lifetimes with a certain location, update driver registration
to take a location as argument rather than a lifetime.
This commit updates the PSA specification draft.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Applications need this to combine implementation-specific values of
persistence levels and location indicators.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Call persistence "default" because that is genuinely the default that
applications should use if they don't know better. It's slightly
misleading in that the default persistence when you create a key is
volatile, not this: "default" is the default persistence for
persistent keys, not the default persistence for keys in general. But
we haven't found a better name.
Introduce the term "primary local storage" to designate the default
storage location.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit adds a macro for buffer bounds checks in the SSL
module. It takes the buffer's current and end position as the
first argument(s), followed by the needed space; if the
available space is too small, it returns an SSL_BUFFER_TOO_SMALL
error.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Most of the documentation and some of the function names use
"asymmetric", so use "asymmetric" everywhere. Mention "public-key" in
key places to make the relevant functions easy to find if someone is
looking for that.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On dual world platforms, we want to run the PK module (pk.c) on the NS
side so TLS can use PSA APIs via the PK interface. PK currently has a
hard dependency on mbedtls_ecc_group_to_psa() which is declared in
crypto_extra.h, but only defined in psa_crypto.c, which is only built
for the S side.
Without this change, dual world platforms get error messages like the
following.
[Error] @0,0: L6218E: Undefined symbol mbedtls_ecc_group_to_psa (referred from BUILD/LPC55S69_NS/ARM/mbed-os/features/mbedtls/mbed-crypto/src/pk.o)
Make mbedtls_ecc_group_to_psa() inline within crypto_extra.h so that it
is available to both NS and S world code.
Fixes#3300
Signed-off-by: Darryl Green <darryl.green@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
This routine is functionally equivalent to mbedtls_x509_crt_parse_der(),
but it accepts an additional callback function which it calls with
every unsupported certificate extension.
Proposed solution to https://github.com/ARMmbed/mbedtls/issues/3241
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
1. The functions mbedtls_high_level_strerr and mbedtls_low_level_strerr
accept any error code and extract the high-level and low-level parts
respectively.
2. Documentation updates.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
The presence of these markers in the original code was helpful to me in
figuring out that this portion of the code is auto-generated.
Therefore, I think those are useful and should be present.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Problem
-------
mbedtls_strerror is a utility function which converts an mbedTLS error code
into a human readable string. It requires the caller to allocate a buffer every
time an error code needs to be converted to a string. It is an overkill and a
waste of RAM for resource constrained microcontrollers - where the most common
use case is to use these strings for logging.
Solution
--------
The proposed commit adds two functions:
* const char * mbedtls_high_level_strerr( int error_code );
* const char * mbedtls_low_level_strerr( int error_code );
The above two functions convert the high level and low level parts of an mbedTLS
error code to human readable strings. They return a const pointer to an
unmodifiable string which is not supposed to be modified by the caller and only
to be used for logging purposes. The caller no longer needs to allocate a
buffer.
Backward Compatibility
----------------------
The proposed change is completely backward compatible as it does not change
the existing mbedtls_strerror function and ensures that it continues to behave
the same way.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Additional sanity checks in check_config.h to ensure:
* if test certificates are included (MBEDTLS_CERTS_C) there must be also be
support for the core X509 feature (MBEDTLS_X509_USE_C). This has a
secondary dependency on the public key abstraction layer (MBEDTLS_PK_C),
necessary as the certificates will either be signed by RSA or ECDSA, and
therefore need to be part of the library.
* if any of the TLS protocols are defined (MBEDTLS_SSL_PROTO_xxx) then a
key exchange method must also be defined (MBEDTLS_KEY_EXCHANGE_xxx).
Anyone who knows the library will probably not make these mistakes or will
quickly diagnose and fix them, but it is possible to compile and link both
configurations if you build only the library and not the example programs, and
therefore users may not realise immediately that there's a mistake, only
discovering it at runtime.
These checks may therefore save someone some time.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
When this option is enabled, the product includes additional
interfaces that enable additional tests. This option should not be
enabled in production, but is included in the "full" build to enable
the extra tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Look for changes that remove X509/SSL functionality.
```
git diff 'HEAD^{/^Merge}~1' HEAD --diff-filter=M -- . ':!library/error.c' ':!library/version_features.c' ':!programs/test/query_config.c' ':!visualc' ':!*.pdf' ':!*.der' | grep -E "^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_"
```
All of these removals are in `config.h` or `check_config.h`. Selectively revert the differences in these two files.
```
git diff 'HEAD^{/^Merge}~1' 'HEAD^{/^Merge}' include/mbedtls/config.h include/mbedtls/check_config.h | git apply -p1 -R
```
* `include/mbedtls/check_config.h`:
* ARIA for GCM: don't remove it.
* `MBEDTLS_PSA_CRYPTO_SE_C`: don't remove it.
* `MBEDTLS_SHA512_NO_SHA384`: don't remove it.
* `MBEDTLS_SSL_DTLS_CONNECTION_ID`: restore it.
* `include/mbedtls/config.h`:
* warning about `MBEDTLS_ECDSA_SIGN_ALT`: don't remove it.
* `MBEDTLS_CTR_DRBG_USE_128_BIT_KEY` full paragraph: don't remove it.
* `MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER`: don't remove it.
* `MBEDTLS_SHA512_SMALLER`…: don't remove it.
* `MBEDTLS_SSL_RECORD_CHECKING`: restore it.
* `MBEDTLS_SSL_CONTEXT_SERIALIZATION`: restore it.
* `MBEDTLS_USE_PSA_CRYPTO` note: don't restore the tls version.
* `MBEDTLS_USE_PSA_CRYPTO` warning: restore the tls version.
* `MBEDTLS_CMAC_C`: restore it to being disabled by default. It's a minor API change in Mbed TLS because it changes the layout of `mbedtls_cipher_context_t`.
* `MBEDTLS_CTR_DRBG_C`: don't restore the older version of the description from tls.
* `MBEDTLS_GCM_C`: don't restore the older description from tls.
* `MBEDTLS_PSA_CRYPTO_C`: don't restore `crypto/`.
* `MBEDTLS_PSA_CRYPTO_SE_C`: don't remove it.
* `MBEDTLS_PSA_CRYPTO_STORAGE_C`: don't restore `crypto/`. Don't disable it by default.
* `MBEDTLS_PSA_ITS_FILE_C`: don't restore, like for ``MBEDTLS_PSA_CRYPTO_STORAGE_C``.
* `MBEDTLS_CTR_DRBG_USE_128_BIT_KEY` single line: don't restore it since there is now a full paragraph in the proper section above.
* `MBEDTLS_SSL_CID_IN_LEN_MAX`…: restore it.
* `MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES`: restore the version without a space to format the line like the others.
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
Add a description of MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY to the
documentation, as suggested by hanno-arm.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a conditional buffer resizing feature. Introduce tests exercising
it in various setups (serialization, renegotiation, mfl manipulations).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This patch changes the compatibility API defined in crypto_compat.h
to static inline functions as the previous macro definitions were
causing issues for the C pre-processor when included in projects
which need to redefine the PSA function names. Making it static
inline function solves this problem neatly and also modern compilers
do a good job at inlining the function which makes the need for making
it a macro redundant.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
* iotssl-2652-deprecate-pkcs11:
Group PKCS11_C entries in check_config.h
Clarify that what we're dropping is pkcs11-helper support
Fix typo in doxy docs for ssl_pkcs11_sign()
Add missing docs to PKCS#11 public funcs
Wrap PKCS1 module with DEPRECATED_REMOVED
Fix deprecated docs for PKCS1
Deprecate MBEDTLS_PKCS11_C functions
Add ChangeLog entry for MBEDTLS_PKCS11_C deprecation
Deprecate MBEDTLS_PKCS11_C feature
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
Adapt to the change of encoding of elliptic curve key types in PSA
crypto. Before, an EC key type encoded the TLS curve identifier. Now
the EC key type only includes an ad hoc curve family identifier, and
determining the exact curve requires both the key type and size. This
commit moves from the old encoding and old definitions from
crypto/include/mbedtls/psa_util.h to the new encoding and definitions
from the immediately preceding crypto submodule update.
Change the encoding of key types, EC curve families and DH group
families to make the low-order bit a parity bit (with even parity).
This ensures that distinct key type values always have a Hamming
distance of at least 2, which makes it easier for implementations to
resist single bit flips.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
Remove the values of curve encodings that are based on the TLS registry
and include the curve size, keeping only the new encoding that merely
encodes a curve family in 8 bits.
Keep the old constant names as aliases for the new values and
deprecate the old names.
Define constants for ECC curve families and DH group families. These
constants have 0x0000 in the lower 16 bits of the key type.
Support these constants in the implementation and in the PSA metadata
tests.
Switch the slot management and secure element driver HAL tests to the
new curve encodings. This requires SE driver code to become slightly
more clever when figuring out the bit-size of an imported EC key since
it now needs to take the data size into account.
Switch some documentation to the new encodings.
Remove the macro PSA_ECC_CURVE_BITS which can no longer be implemented.
Change the representation of psa_ecc_curve_t and psa_dh_group_t from
the IETF 16-bit encoding to a custom 24-bit encoding where the upper 8
bits represent a curve family and the lower 16 bits are the key size
in bits. Families are based on naming and mathematical similarity,
with sufficiently precise families that no two curves in a family have
the same bit size (for example SECP-R1 and SECP-R2 are two different
families).
As a consequence, the lower 16 bits of a key type value are always
either the key size or 0.
Don't assume that the PSA encoding of elliptic curves is identical to
the TLS encoding. This is currently true but about to change.
The new implementation only works when MBEDTLS_ECP_C is defined. This
is ok because the function is only used with MBEDTLS_ECP_C defined.
Internally, use the corresponding function from psa_crypto.c instead.
Externally, this function is not used in Mbed TLS and is documented as
"may change at any time".
Key types are now encoded through a category in the upper 4 bits (bits
28-31) and a type-within-category in the next 11 bits (bits 17-27),
with bit 16 unused and bits 0-15 only used for the EC curve or DH
group.
For symmetric keys, bits 20-22 encode the block size (0x0=stream,
0x3=8B, 0x4=16B).
Change the numerical encoding of values for symmetric key types to
have 0000 as the lower 16 bits. Now the lower 16 bits are only used
for key types that have a subtype (EC curve or DH group).
Whether a parameter should be const is an implementation detail of the
function, so don't declare a parameter of psa_hash_compare as
const. (This only applies to parameters themselves, not to objects
that pointer parameters points to.)
Before the initial seeding, reseed_counter used to always be 0. Now, the
value depends on whether or not the user has explicitly set the amount
of data to get from the nonce (via e.g.
mbedtls_ctr_drbg_set_nonce_len()). Add comments to clarify the possible
values reseed_counter can have before the initial seeding.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
Rename some macros and functions related to signature which are
changing as part of the addition of psa_sign_message and
psa_verify_message.
perl -i -pe '%t = (
PSA_KEY_USAGE_SIGN => PSA_KEY_USAGE_SIGN_HASH,
PSA_KEY_USAGE_VERIFY => PSA_KEY_USAGE_VERIFY_HASH,
PSA_ASYMMETRIC_SIGNATURE_MAX_SIZE => PSA_SIGNATURE_MAX_SIZE,
PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE => PSA_SIGN_OUTPUT_SIZE,
psa_asymmetric_sign => psa_sign_hash,
psa_asymmetric_verify => psa_verify_hash,
); s/\b(@{[join("|", keys %t)]})\b/$t{$1}/ge' $(git ls-files . ':!:**/crypto_compat.h')
Move backward compatibility aliases to a separate header. Reserve
crypto_extra.h for implementation-specific extensions that we intend
to keep supporting.
This is better documentation for users. New users should simply ignore
backward compatibility aliases, and old users can look at
crypto_compat.h to see what is deprecated without bothering about new
features appearing in crypto_extra.h.
This facilitates maintenance because scripts such as
generate_psa_constants that want to ignore backward compability
aliases can simply exclude crypto_compat.h from their parsing.
First deal with deleted files.
* Files deleted by us: keep them deleted.
* Files deleted by them, whether modified by us or not: keep our version.
```
git rm $(git status -s | sed -n 's/^DU //p')
git reset -- $(git status -s | sed -n 's/^D //p')
git checkout -- $(git status -s | sed -n 's/^ D //p')
git add -- $(git status -s | sed -n 's/^UD //p')
```
Individual files with conflicts:
* `3rdparty/everest/library/Hacl_Curve25519_joined.c`: spurious conflict because git mistakenly identified this file as a rename. Keep our version.
* `README.md`: conflict due to their change in a paragraph that doesn't exist in our version. Keep our version of this paragraph.
* `docs/architecture/Makefile`: near-identical additions. Adapt the definition of `all_markdown` and include the clean target.
* `doxygen/input/docs_mainpage.h`: conflict in the version number. Keep our version number.
* `include/mbedtls/config.h`: two delete/modify conflicts. Keep the removed chunks out.
* `library/CMakeLists.txt`: discard all their changes as they are not relevant.
* `library/Makefile`:
* Discard the added chunk about the crypto submodule starting with `INCLUDING_FROM_MBEDTLS:=1`.
* delete/modify: keep the removed chunk out.
* library build: This is almost delete/modify. Their changes are mostly not applicable. Do keep the `libmbedcrypto.$(DLEXT): | libmbedcrypto.a` order dependency.
* `.c.o`: `-o` was added on both sides but in a different place. Change to their place.
* `library/error.c`: to be regenerated.
* `library/version_features.c`: to be regenerated.
* `programs/Makefile`: Most of the changes are not relevant. The one relevant change is in the `clean` target for Windows; adapt it by removing `/S` from our version.
* `programs/test/query_config.c`: to be regenerated.
* `scripts/config.py`: added in parallel on both sides. Keep our version.
* `scripts/footprint.sh`: parallel changes. Keep our version.
* `scripts/generate_visualc_files.pl`: one delete/modify conflict. Keep the removed chunks out.
* `tests/Makefile`: discard all of their changes.
* `tests/scripts/all.sh`:
* `pre_initialize_variables` add `append_outcome`: add it.
* `pre_initialize_variables` add `ASAN_CFLAGS`: already there, keep our version.
* `pre_parse_command_line` add `--no-append-outcome`: add it.
* `pre_parse_command_line` add `--outcome-file`: add it.
* `pre_print_configuration`: add `MBEDTLS_TEST_OUTCOME_FILE`.
* Several changes in SSL-specific components: keep our version without them.
* Several changes where `config.pl` was changed to `config.py` and there was an adjacent difference: keep our version.
* Changes regarding the inclusion of `MBEDTLS_MEMORY_xxx`: ignore them here, they will be normalized in a subsequent commit.
* `component_test_full_cmake_gcc_asan`: add it without the TLS tests.
* `component_test_no_use_psa_crypto_full_cmake_asan`: keep the fixed `msg`, discard other changes.
* `component_test_memory_buffer_allocator_backtrace`, `component_test_memory_buffer_allocator`: add them without the TLS tests.
* `component_test_m32_everest`: added in parallel on both sides. Keep our version.
* `tests/scripts/check-names.sh`, `tests/scripts/list-enum-consts.pl`, `tests/scripts/list-identifiers.sh`, ``tests/scripts/list-macros.sh`: discard all of their changes.
* `tests/scripts/test-ref-configs.pl`: the change in the conflict is not relevant, so keep our version there.
* `visualc/VS2010/*.vcxproj`: to be regenerated.
Regenerate files:
```
scripts/generate_visualc_files.pl
git add visualc/VS2010/*.vcxproj
scripts/generate_errors.pl
git add library/error.c
scripts/generate_features.pl
git add library/version_features.c
scripts/generate_query_config.pl
git add programs/test/query_config.c
```
Rejected changes in non-conflicting files:
* `CMakeLists.txt`: discard their addition which has already been side-ported.
* `doxygen/mbedtls.doxyfile`: keep the version number change. Discard the changes related to `../crypto` paths.
Keep the following changes after examination:
* `.travis.yml`: all of their changes are relevant.
* `include/mbedtls/error.h`: do keep their changes. Even though Crypto doesn't use TLS errors, it must not encroach on TLS's allocated numbers.
* `tests/scripts/check-test-cases.py`: keep the code dealing with `ssl-opt.sh`. It works correctly when the file is not present.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
The initial value for the max calculation needs to be 0. The fallback
needs to come last. With the old code, the value was never smaller
than the fallback.
For RSA_ALT, use MPI_MAX_SIZE. Only use this if RSA_ALT is enabled.
For PSA, check PSA_ASYMMETRIC_SIGNATURE_MAX_SIZE, and separately check
the special case of ECDSA where PSA and mbedtls have different
representations for the signature.
PSA_ASYMMETRIC_SIGNATURE_MAX_SIZE was taking the maximum ECDSA key
size as the ECDSA signature size. Fix it to use the actual maximum
size of an ECDSA signature.
The original definition of MBEDTLS_PK_SIGNATURE_MAX_SIZE only took RSA
into account. An ECDSA signature may be larger than the maximum
possible RSA signature size, depending on build options; for example
this is the case with config-suite-b.h.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing it. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Since the addition of mbedtls_ctr_drbg_set_nonce_len(),
the second call to mbedtls_ctr_drbg_seed() uses a nonsensical value as
the entropy nonce length.
Calling free() and seed() with no intervening init fails when
MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid mutex
representation.
The default entropy nonce length is either zero or nonzero depending
on the desired security strength and the entropy length.
The implementation calculates the actual entropy nonce length from the
actual entropy length, and therefore it doesn't need a constant that
indicates the default entropy nonce length. A portable application may
be interested in this constant, however. And our test code could
definitely use it.
Define a constant MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN and use it in
test code. Previously, test_suite_ctr_drbg had knowledge about the
default entropy nonce length built in and test_suite_psa_crypto_init
failed. Now both use MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN.
This change means that the test ctr_drbg_entropy_usage no longer
validates that the default entropy nonce length is sensible. So add a
new test that checks that the default entropy length and the default
entropy nonce length are sufficient to ensure the expected security
strength.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
Document that passing 0 to a close/destroy function does nothing and
returns PSA_SUCCESS.
Although this was not written explicitly, the specification strongly
suggested that this would return PSA_ERROR_INVALID_HANDLE. While
returning INVALID_HANDLE makes sense, it was awkward for a very common
programming style where applications can store 0 in a handle variable
to indicate that the handle has been closed or has never been open:
applications had to either check if (handle != 0) before calling
psa_close_key(handle) or psa_destroy_key(handle), or ignore errors
from the close/destroy function. Now applications following this style
can just call psa_close_key(handle) or psa_destroy_key(handle).
The documentation of HMAC_DRBG erroneously claimed that
mbedtls_hmac_drbg_set_entropy_len() had an impact on the initial
seeding. This is in fact not the case: mbedtls_hmac_drbg_seed() forces
the entropy length to its chosen value. Fix the documentation.
The documentation of CTR_DRBG erroneously claimed that
mbedtls_ctr_drbg_set_entropy_len() had an impact on the initial
seeding. This is in fact not the case: mbedtls_ctr_drbg_seed() forces
the initial seeding to grab MBEDTLS_CTR_DRBG_ENTROPY_LEN bytes of
entropy. Fix the documentation and rewrite the discussion of the
entropy length and the security strength accordingly.
