Test signature and signature verification by a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test_suite_psa_crypto_driver_wrappers test suite, the
sign/verify tests with software fallback tests should be run
only if the software fallback is available.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change signature test driver default forced return
value from PSA_ERROR_NOT_SUPPORTED to PSA_SUCCESS to
be able to run the PSA unit tests with hash signature
and signature verification being handled by the
transparent test driver.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change psa_ecdsa_sign/verify signature to that of
a sign/verify_hash driver entry point before to
move them to the psa_crypto_ecp.c ECP specific file.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
There are type annotations that indirectly depend on the
typing_extensions module (on Python 3.5-3.7: Protocol was added to the
core typing module in 3.8). The typing_extensions module is not
installed by default, so the code didn't run on a pristine Python
installation.
To avoid depending on a non-default module, make the dependency on
typing_extensions optional. (It's still required to run mypy, but
installing mypy takes care of providing typing_extensions.) If it
isn't available, provide a substitute definition that's just good
enough to get the scripts to run.
Move this ugly code to its own module to avoid the temptation of
spreading such ugliness all over the place. It's likely to be used in
other modules anyway.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A temporary hack: at the time of writing, not all dependency symbols
are implemented yet. Skip test cases for which the dependency symbols are
not available. Once all dependency symbols are available, this comit
should be reverted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_TYPE_RAW_DATA and PSA_KEY_TYPE_DERIVE are always supported.
Make this explicit by declaring PSA_WANT_KEY_TYPE_RAW_DATA and
PSA_WANT_KEY_TYPE_DERIVE unconditionally. This makes it easier to
infer dependencies in a systematic way.
Don't generate not-supported test cases for those key types. They
would always be skipped, which is noise and would make it impossible
to eventually validate that all test cases pass in at least one
configuration over the whole CI.
Don't remove the exception in set_psa_test_dependencies.py for now, to
get less noise in dependencies. This may be revised later if it is
deemed more important to be systematic.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ECC curve dependency symbols include the key size in addition to the
curve family. Tweak the dependencies once the key size is known.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test data file is automatically generated. We could do that as
part of the build, since the only requirement is Python and we have a
requirement on Python to build tests anyway (to generate the .c file
from the .function file). However, committing the generating file into
the repository has less impact on build scripts, and will be necessary
for some of the files generated by generate_psa_tests.py (at least the
storage format stability tests, for which stability is guaranteed by
the fact that the generated file doesn't change). To keep things
simple, for now, let's commit all the files generated by
generate_psa_tests.py into the repository.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the generation is sensitive to trivial differences such as
running `tests/scripts/generate_psa_tests.py` vs
`./tests/scripts/generate_psa_tests.py` vs an absolute path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add support for ECC key types to the generation of not-supported test
cases in generate_psa_tests.py. For each curve, generate test cases
both for when ECC isn't supported and for when the curve isn't
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SECP192R1 is declared in the PSA API specification, but it's an old
one that Mbed TLS doesn't support and even OpenSSL doesn't support.
We don't have test vectors for it. Just skip it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Asymmetric keys can't just be arbitrary byte strings: the public key
has to match the private key and the private key usually has
nontrivial constraints.
In order to have deterministic test data and not to rely on
cryptographic dependencies in the Python script, hard-code some test
keys.
In this commit, copy some test keys from test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For each declared key type, generate test cases for psa_import_key and
psa_generate_key when the corresponding type is not supported.
Some special cases:
* Public keys can never be generated.
* Omit key types that Mbed TLS does not support at all.
* ECC and FFDH, which depend on a curve/group, are not covered yet.
The generated test cases are written to
tests/suites/test_suite_psa_crypto_not_supported.generated.data .
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit creates a script to generate test cases automatically
based on enumerating PSA key types, algorithms and other
classifications of cryptographic mechanisms.
Subsequent commits will implement the generation of test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To start with, test that key creation fails as intended when the key
type is not supported. This commit only covers psa_import_key and
psa_generate_key. A follow-up will cover psa_key_derivation_output_key.
My primary intent in creating this new test suite is to automatically
generate test cases by enumerating the key types and algorithms that
the library supports. But this commit only adds a few manually written
test cases, to get the ball rolling.
Move the relevant test cases of test_suite_psa_crypto.data that only
depend on generic knowledge about the API. Keep test cases that depend
more closely on the implementation, such as tests of non-supported key
sizes, in test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
New Python module intended to gather knowledge about key types and
cryptographic mechanisms, such as the ability to create test data for
a given key type and the determination of whether an algorithm is
compatible with a key type.
This commit just creates a class for knowledge about key types.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Older versions of Pylint (<2.1.0) limited the names of various things
to 30 characters. We allowed up to 35 characters for method name due
to pre-existing identifiers.
Modern versions of Pylint no longer have an upper limit. Let's not be
pickier than Pylint's default configuration.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
At the moment it makes no difference, but it could if e.g. a new
algorithm was called 'foomask'.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
By default, exclude macros whose numerical value is not a valid member
of the semantic type (e.g. PSA_ALG_xxx_BASE is not itself an
algorithm, only an intermediate value used to construct others). But
do include them with include_intermediate=True, which
generate_psa_constants.py does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Change psa_rsa_sign/verify signature to that of
a sign/verify_hash driver entry point before to
move them to the psa_crypto_rsa.c RSA specific file.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change psa_driver_wrapper_sign/verify_hash signature
to that of a sign/verify_hash driver entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Wrap sign/verify_hash software implementation into
psa_sign/verify_hash_internal() functions whose
signature is that of a sign/verify_hash driver
entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Update with CHACHA20_POLY1305, CHACHA20. Add in CTR, which was missing,
and move ALG_XTS to its proper location alphabetically.
Signed-off-by: David Brown <david.brown@linaro.org>
Change the psa_crypto use of the CHACHA20 cipher to also use the new
MBEDTLS_PSA_BUILTIN_KE_TYPE_CHACHA20.
Signed-off-by: David Brown <david.brown@linaro.org>
