In ssl_parse_hello_verify_request, we print cookie_len bytes without
checking that there are that many bytes left in ssl->in_msg. This
could potentially log data outside the received message (not a big
deal) and could potentially read from memory outside of the receive
buffer (which would be a remotely exploitable crash).
* restricted/pr/666: (24 commits)
Add ChangeLog entry
mpi_lt_mpi_ct: fix condition handling
mpi_lt_mpi_ct: Add further tests
mpi_lt_mpi_ct: Fix test numbering
mpi_lt_mpi_ct perform tests for both limb size
ct_lt_mpi_uint: cast the return value explicitely
mbedtls_mpi_lt_mpi_ct: add tests for 32 bit limbs
mbedtls_mpi_lt_mpi_ct: simplify condition
Rename variable for better readability
mbedtls_mpi_lt_mpi_ct: Improve documentation
Make mbedtls_mpi_lt_mpi_ct more portable
Bignum: Document assumptions about the sign field
Add more tests for mbedtls_mpi_lt_mpi_ct
mpi_lt_mpi_ct test: hardcode base 16
Document ct_lt_mpi_uint
mpi_lt_mpi_ct: make use of unsigned consistent
ct_lt_mpi_uint: make use of biL
Change mbedtls_mpi_cmp_mpi_ct to check less than
mbedtls_mpi_cmp_mpi_ct: remove multiplications
Remove excess vertical space
...
This issue has been reported by Tuba Yavuz, Farhaan Fowze, Ken (Yihang) Bai,
Grant Hernandez, and Kevin Butler (University of Florida) and
Dave Tian (Purdue University).
In AES encrypt and decrypt some variables were left on the stack. The value
of these variables can be used to recover the last round key. To follow best
practice and to limit the impact of buffer overread vulnerabilities (like
Heartbleed) we need to zeroize them before exiting the function.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
The blinding applied to the scalar before modular inversion is
inadequate. Bignum is not constant time/constant trace, side channel
attacks can retrieve the blinded value, factor it (it is smaller than
RSA keys and not guaranteed to have only large prime factors). Then the
key can be recovered by brute force.
Reducing the blinded value makes factoring useless because the adversary
can only recover pk*t+z*N instead of pk*t.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
The former test-only function mbedtls_ctr_drbg_seed_entropy_len() is
no longer used, but keep it for strict ABI compatibility.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
According to SP800-90A, the DRBG seeding process should use a nonce
of length `security_strength / 2` bits as part of the DRBG seed. It
further notes that this nonce may be drawn from the same source of
entropy that is used for the first `security_strength` bits of the
DRBG seed. The present HMAC DRBG implementation does that, requesting
`security_strength * 3 / 2` bits of entropy from the configured entropy
source in total to form the initial part of the DRBG seed.
However, some entropy sources may have thresholds in terms of how much
entropy they can provide in a single call to their entropy gathering
function which may be exceeded by the present HMAC DRBG implementation
even if the threshold is not smaller than `security_strength` bits.
Specifically, this is the case for our own entropy module implementation
which only allows requesting at most 32 Bytes of entropy at a time
in configurations disabling SHA-512, and this leads to runtime failure
of HMAC DRBG when used with Mbed Crypto' own entropy callbacks in such
configurations.
This commit fixes this by splitting the seed entropy acquisition into
two calls, one requesting `security_strength` bits first, and another
one requesting `security_strength / 2` bits for the nonce.
Fixes#237.
* origin/mbedtls-2.7:
Changelog entry for HAVEGE fix
Prevent building the HAVEGE module on platforms where it doesn't work
Fix misuse of signed ints in the HAVEGE module
The failure of mbedtls_md was not checked in one place. This could have led
to an incorrect computation if a hardware accelerator failed. In most cases
this would have led to the key exchange failing, so the impact would have been
a hard-to-diagnose error reported in the wrong place. If the two sides of the
key exchange failed in the same way with an output from mbedtls_md that was
independent of the input, this could have led to an apparently successful key
exchange with a predictable key, thus a glitching md accelerator could have
caused a security vulnerability.
If int is not capable of storing as many values as unsigned, the code
may generate a trap value. If signed int and unsigned int aren't
32-bit types, the code may calculate meaningless values.
The elements of the HAVEGE state are manipulated with bitwise
operations, with the expectations that the elements are 32-bit
unsigned integers (or larger). But they are declared as int, and so
the code has undefined behavior. Clang with Asan correctly points out
some shifts that reach the sign bit.
Use unsigned int internally. This is technically an aliasing violation
since we're accessing an array of `int` via a pointer to `unsigned
int`, but since we don't access the array directly inside the same
function, it's very unlikely to be compiled in an unintended manner.
* restricted/pr/581:
Remove unnecessary empty line
Add a test for signing content with a long ECDSA key
Add documentation notes about the required size of the signature buffers
Add missing MBEDTLS_ECP_C dependencies in check_config.h
Change size of preallocated buffer for pk_sign() calls
* origin/pr/2713:
programs: Make `make clean` clean all programs always
ssl_tls: Enable Suite B with subset of ECP curves
windows: Fix Release x64 configuration
timing: Remove redundant include file
net_sockets: Fix typo in net_would_block()
- Explain the use of explicit ASN.1 tagging for the extensions structuree
- Remove misleading comment which suggests that mbedtls_x509_get_ext()
also parsed the header of the first extension, which is not the case.
Some functions within the X.509 module return an ASN.1 low level
error code where instead this error code should be wrapped by a
high-level X.509 error code as in the bulk of the module.
Specifically, the following functions are affected:
- mbedtls_x509_get_ext()
- x509_get_version()
- x509_get_uid()
This commit modifies these functions to always return an
X.509 high level error code.
Care has to be taken when adapting `mbetls_x509_get_ext()`:
Currently, the callers `mbedtls_x509_crt_ext()` treat the
return code `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG` specially to
gracefully detect and continue if the extension structure is not
present. Wrapping the ASN.1 error with
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and adapting the check
accordingly would mean that an unexpected tag somewhere
down the extension parsing would be ignored by the caller.
The way out of this is the following: Luckily, the extension
structure is always the last field in the surrounding structure,
so if there is some data remaining, it must be an Extension
structure, so we don't need to deal with a tag mismatch gracefully
in the first place.
We may therefore wrap the return code from the initial call to
`mbedtls_asn1_get_tag()` in `mbedtls_x509_get_ext()` by
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and simply remove
the special treatment of `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG`
in the callers `x509_crl_get_ext()` and `x509_crt_get_ext()`.
This renders `mbedtls_x509_get_ext()` unsuitable if it ever
happened that an Extension structure is optional and does not
occur at the end of its surrounding structure, but for CRTs
and CRLs, it's fine.
The following tests need to be adapted:
- "TBSCertificate v3, issuerID wrong tag"
The issuerID is optional, so if we look for its presence
but find a different tag, we silently continue and try
parsing the subjectID, and then the extensions. The tag '00'
used in this test doesn't match either of these, and the
previous code would hence return LENGTH_MISMATCH after
unsucessfully trying issuerID, subjectID and Extensions.
With the new code, any data remaining after issuerID and
subjectID _must_ be Extension data, so we fail with
UNEXPECTED_TAG when trying to parse the Extension data.
- "TBSCertificate v3, UIDs, invalid length"
The test hardcodes the expectation of
MBEDTLS_ERR_ASN1_INVALID_LENGTH, which needs to be
wrapped in MBEDTLS_ERR_X509_INVALID_FORMAT now.
Fixes#2431.
When parsing a substructure of an ASN.1 structure, no field within
the substructure must exceed the bounds of the substructure.
Concretely, the `end` pointer passed to the ASN.1 parsing routines
must be updated to point to the end of the substructure while parsing
the latter.
This was previously not the case for the routines
- x509_get_attr_type_and_value(),
- mbedtls_x509_get_crt_ext(),
- mbedtls_x509_get_crl_ext().
These functions kept using the end of the parent structure as the
`end` pointer and would hence allow substructure fields to cross
the substructure boundary. This could lead to successful parsing
of ill-formed X.509 CRTs.
This commit fixes this.
Care has to be taken when adapting `mbedtls_x509_get_crt_ext()`
and `mbedtls_x509_get_crl_ext()`, as the underlying function
`mbedtls_x509_get_ext()` returns `0` if no extensions are present
but doesn't set the variable which holds the bounds of the Extensions
structure in case the latter is present. This commit addresses
this by returning early from `mbedtls_x509_get_crt_ext()` and
`mbedtls_x509_get_crl_ext()` if parsing has reached the end of
the input buffer.
The following X.509 parsing tests need to be adapted:
- "TBSCertificate, issuer two inner set datas"
This test exercises the X.509 CRT parser with a Subject name
which has two empty `AttributeTypeAndValue` structures.
This is supposed to fail with `MBEDTLS_ERR_ASN1_OUT_OF_DATA`
because the parser should attempt to parse the first structure
and fail because of a lack of data. Previously, it failed to
obey the (0-length) bounds of the first AttributeTypeAndValue
structure and would try to interpret the beginning of the second
AttributeTypeAndValue structure as the first field of the first
AttributeTypeAndValue structure, returning an UNEXPECTED_TAG error.
- "TBSCertificate, issuer, no full following string"
This test exercises the parser's behaviour on an AttributeTypeAndValue
structure which contains more data than expected; it should therefore
fail with MBEDTLS_ERR_ASN1_LENGTH_MISMATCH. Because of the missing bounds
check, it previously failed with UNEXPECTED_TAG because it interpreted
the remaining byte in the first AttributeTypeAndValue structure as the
first byte in the second AttributeTypeAndValue structure.
- "SubjectAltName repeated"
This test should exercise two SubjectAltNames extensions in succession,
but a wrong length values makes the second SubjectAltNames extension appear
outside of the Extensions structure. With the new bounds in place, this
therefore fails with a LENGTH_MISMATCH error. This commit adapts the test
data to put the 2nd SubjectAltNames extension inside the Extensions
structure, too.
* restricted/pr/554:
Fix too small buffer in a test
Add changelog entry for mbedtls_ecdh_get_params robustness
Fix ecdh_get_params with mismatching group
Add test case for ecdh_get_params with mismatching group
Add test case for ecdh_calc_secret
* origin/pr/2435:
Use certificates from data_files and refer them
Specify server certificate to use in SHA-1 test
refactor CA and SRV certificates into separate blocks
refactor SHA-1 certificate defintions and assignment
refactor server SHA-1 certificate definition into a new block
define TEST_SRV_CRT_RSA_SOME in similar logic to TEST_CA_CRT_RSA_SOME
server SHA-256 certificate now follows the same logic as CA SHA-256 certificate
add entry to ChangeLog
* restricted/pr/529:
Fix order of sections in the ChangeLog
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
If mbedtls_ecdh_get_params is called with keys belonging to
different groups, make it return an error the second time, rather than
silently interpret the first key as being on the second curve.
This makes the non-regression test added by the previous commit pass.
Refactor the function mbedtls_asn1_write_bitstring() that removes
trailing 0s at the end of DER encoded bitstrings. The function is
implemented according to Hanno Becker's suggestions.
This commit also changes the functions x509write_crt_set_ns_cert_type
and crt_set_key_usage to call the new function as the use named
bitstrings instead of the regular bitstrings.
In mbedtls_mpi_exp_mod(), the limit check on wsize is never true when
MBEDTLS_MPI_WINDOW_SIZE is at least 6. Wrap in a preprocessor guard
to remove the dead code and resolve a Coverity finding from the
DEADCODE checker.
Change-Id: Ice7739031a9e8249283a04de11150565b613ae89
Fixes memory leak in mpi_miller_rabin() that occurs when the function has
failed to obtain a usable random 'A' 30 turns in a row.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
DTLS records from previous epochs were incorrectly checked against the
current epoch transform's minimal content length, leading to the
rejection of entire datagrams. This commit fixed that and adapts two
test cases accordingly.
Internal reference: IOTSSL-1417
We were still reusing the internal HMAC-DRBG of the deterministic ECDSA
for blinding. This meant that with cryptographically low likelyhood the
result was not the same signature as the one the deterministic ECDSA
algorithm has to produce (however it is still a valid ECDSA signature).
To correct this we seed a second HMAC-DRBG with the same seed to restore
correct behavior. We also apply a label to avoid reusing the bits of the
ephemeral key for a different purpose and reduce the chance that they
leak.
This workaround can't be implemented in the restartable case without
penalising the case where external RNG is available or completely
defeating the purpose of the restartable feature, therefore in this case
the small chance of incorrect behavior remains.
`mbedtls_ecdsa_sign_det` reuses the internal HMAC-DRBG instance to
implement blinding. The advantage of this is that the algorithm is
deterministic too, not just the resulting signature. The drawback is
that the blinding is always the same for the same key and message.
This diminishes the efficiency of blinding and leaks information about
the private key.
A function that takes external randomness fixes this weakness.
Use `cmake -D CMAKE_BUILD_TYPE=Asan` rather than manually setting
`-fsanitize=address`. This lets cmake determine the necessary compiler
and linker flags.
With UNSAFE_BUILD on, force -Wno-error. This is necessary to build
with MBEDTLS_TEST_NULL_ENTROPY.
Return the error code if failed, instead of returning value `1`.
If not failed, return the call of the underlying function,
in `mbedtls_ecdsa_genkey()`.
Change the secondary X509 CSR parsing call for the alternative MS header to only
occur if the first call fails due to the header being unfound, instead of any
call.
Add support for RFC7468, and the alternative Microsoft footer/headers for CSR's
that contain the text 'BEGIN NEW CERTIFICATE REQUEST' instead of
'BEGIN CERTIFICATE REQUEST'.
Refactor `mpi_write_hlp()` to not be recursive, to fix stack overflows.
Iterate over the `mbedtls_mpi` division of the radix requested,
until it is zero. Each iteration, put the residue in the next LSB
of the output buffer. Fixes#2190
In mbedtls_mpi_write_binary, avoid leaking the size of the number
through timing or branches, if possible. More precisely, if the number
fits in the output buffer based on its allocated size, the new code's
trace doesn't depend on the value of the number.
Previously, when checking whether a CRT was revoked through
one of the configured CRLs, the library would only consider
those CRLs whose `issuer` field binary-matches the `subject`
field of the CA that has issued the CRT in question. If those
fields were not binary equivalent, the corresponding CRL was
discarded.
This is not in line with RFC 5280, which demands that the
comparison should be format- and case-insensitive. For example:
- If the same string is once encoded as a `PrintableString` and
another time as a `UTF8String`, they should compare equal.
- If two strings differ only in their choice of upper and lower case
letters, they should compare equal.
This commit fixes this by using the dedicated x509_name_cmp()
function to compare the CRL issuer with the CA subject.
Fixes#1784.
This commit fixes issue #1212 related to platform-specific entropy
polling in an syscall-emulated environment.
Previously, the implementation of the entropy gathering function
`mbedtls_platform_entropy_poll()` for linux machines used the
following logic to determine how to obtain entropy from the kernel:
1. If the getrandom() system call identifier SYS_getrandom is present and
the kernel version is 3.17 or higher, use syscall( SYS_getrandom, ... )
2. Otherwise, fall back to reading from /dev/random.
There are two issues with this:
1. Portability:
When cross-compiling the code for a different
architecture and running it through system call
emulation in qemu, qemu reports the host kernel
version through uname but, as of v.2.5.0,
doesn't support emulating the getrandom() syscall.
This leads to `mbedtls_platform_entropy_poll()`
failing even though reading from /dev/random would
have worked.
2. Style:
Extracting the linux kernel version from
the output of `uname` is slightly tedious.
This commit fixes both by implementing the suggestion in #1212:
- It removes the kernel-version detection through uname().
- Instead, it checks whether `syscall( SYS_getrandom, ... )`
fails with errno set to ENOSYS indicating an unknown system call.
If so, it falls through to trying to read from /dev/random.
Fixes#1212.
Use `( x >> y ) & z` instead of `x >> y & z`. Both are equivalent
by operator precedence, but the former is more readable and the
commonly used idiom in the library.
stdio.h was being included both conditionally if MBEDTLS_FS_IO was
defined, and also unconditionally, which made at least one of them
redundant.
This change removes the unconditional inclusion of stdio.h and makes it
conditional on MBEDTLS_PLATFORM_C.
Context: This commit makes a change to mbedtls_pk_parse_key() which
is responsible for parsing of private keys. The function doesn't know
the key format in advance (PEM vs. DER, encrypted vs. unencrypted) and
tries them one by one, resetting the PK context in between.
Issue: The previous code resets the PK context through a call to
mbedtls_pk_free() along, lacking the accompanying mbedtls_pk_init()
call. Practically, this is not an issue because functionally
mbedtls_pk_free() + mbedtls_pk_init() is equivalent to mbedtls_pk_free()
with the current implementation of these functions, but strictly
speaking it's nonetheless a violation of the API semantics according
to which xxx_free() functions leave a context in uninitialized state.
(yet not entirely random, because xxx_free() functions must be idempotent,
so they cannot just fill the context they operate on with garbage).
Change: The commit adds calls to mbedtls_pk_init() after those calls
to mbedtls_pk_free() within mbedtls_pk_parse_key() after which the
PK context might still be used.
When a random number is generated for the Miller-Rabin primality test,
if the bit length of the random number is larger than the number being
tested, the random number is shifted right to have the same bit length.
This introduces bias, as the random number is now guaranteed to be
larger than 2^(bit length-1).
Changing this to instead zero all bits higher than the tested numbers
bit length will remove this bias and keep the random number being
uniformly generated.
This commit changes the behavior of the record decryption routine
`ssl_decrypt_buf()` in the following situation:
1. A CBC ciphersuite with Encrypt-then-MAC is used.
2. A record with valid MAC but invalid CBC padding is received.
In this situation, the previous code would not raise and error but
instead forward the decrypted packet, including the wrong padding,
to the user.
This commit changes this behavior to return the error
MBEDTLS_ERR_SSL_INVALID_MAC instead.
While erroneous, the previous behavior does not constitute a
security flaw since it can only happen for properly authenticated
records, that is, if the peer makes a mistake while preparing the
padded plaintext.
This commit duplicates the public function mbedtls_asn1_find_named_data()
defined in library/asn1parse.c within library/asn1write.c in order to
avoid a dependency of the ASN.1 writing module on the ASN.1 parsing module.
The duplication is unproblematic from a semantic and an efficiency
perspective becasue it is just a short list traversal that doesn't
actually do any ASN.1 parsing.
Previously, mbedtls_pkcs5_pbes2() was unconditionally declared
in `pkcs5.h` but defined as a stub returning
`MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE` in case
MBEDTLS_ASN1_PARSE_C was not defined.
In line with the previous commits, this commit removes declaration
and definition from both `pkcs5.h` and `pkcs5.c` in case
MBEDTLS_ASN1_PARSE_C is not defined.
This commit ensures that buffers holding fragmented or
handshake messages get zeroized before they are freed
when the respective handshake message is no longer needed.
Previously, the handshake message content would leak on
the heap.
The code assumed that `int x = - (unsigned) u` with 0 <= u < INT_MAX
sets `x` to the negative of u, but actually this calculates
(UINT_MAX - u) and then converts this value to int, which overflows.
Cast to int before applying the unary minus operator to guarantee the
desired behavior.
The code was making two unsequenced reads from volatile locations.
This is undefined behavior. It was probably harmless because we didn't
care in what order the reads happened and the reads were from ordinary
memory, but UB is UB and IAR8 complained.
The input distribution to primality testing functions is completely
different when used for generating primes and when for validating
primes. The constants used in the library are geared towards the prime
generation use case and are weak when used for validation. (Maliciously
constructed composite numbers can pass the test with high probability)
The mbedtls_mpi_is_prime() function is in the public API and although it
is not documented, it is reasonable to assume that the primary use case
is validating primes. The RSA module too uses it for validating key
material.
This commit removes the definition of the API function
`mbedtls_platform_set_calloc_free()`
from `library/platform.c` in case the macros
`MBEDTLS_PLATFORM_CALLOC_MACRO`
`MBEDTLS_PLATFORM_FREE_MACRO`
for compile time configuration of calloc/free are set.
This is in line with the corresponding header `mbedtls/platform.h`
which declares `mbedtls_platform_set_calloc_free()` only if
`MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO` are not defined.
Fixes#1642.
The previous code triggered a compiler warning because of a comparison
of a signed and an unsigned integer.
The conversion is safe because `len` is representable by 16-bits,
hence smaller than the maximum integer.
In the previous bounds check `(*p) > end - len`, the computation
of `end - len` might underflow if `end` is within the first 64KB
of the address space (note that the length `len` is controlled by
the peer). In this case, the bounds check will be bypassed, leading
to `*p` exceed the message bounds by up to 64KB when leaving
`ssl_parse_server_psk_hint()`. In a pure PSK-based handshake,
this doesn't seem to have any consequences, as `*p*` is not accessed
afterwards. In a PSK-(EC)DHE handshake, however, `*p` is read from
in `ssl_parse_server_ecdh_params()` and `ssl_parse_server_dh_params()`
which might lead to an application crash of information leakage.
Get rid of the variable p. This makes it more apparent where the code
accesses the buffer at an offset whose value is sensitive.
No intended behavior change in this commit.
Rather than doing the quadratic-time constant-memory-trace on the
whole working buffer, do it on the section of the buffer where the
data to copy has to lie, which can be significantly smaller if the
output buffer is significantly smaller than the working buffer, e.g.
for TLS RSA ciphersuites (48 bytes vs MBEDTLS_MPI_MAX_SIZE).
In mbedtls_rsa_rsaes_pkcs1_v15_decrypt, use size_greater_than (which
is based on bitwise operations) instead of the < operator to compare
sizes when the values being compared must not leak. Some compilers
compile < to a branch at least under some circumstances (observed with
gcc 5.4 for arm-gnueabi -O9 on a toy program).
Replace memmove(to, to + offset, length) by a functionally equivalent
function that strives to make the same memory access patterns
regardless of the value of length. This fixes an information leak
through timing (especially timing of memory accesses via cache probes)
that leads to a Bleichenbacher-style attack on PKCS#1 v1.5 decryption
using the plaintext length as the observable.
mbedtls_rsa_rsaes_pkcs1_v15_decrypt takes care not to reveal whether
the padding is valid or not, even through timing or memory access
patterns. This is a defense against an attack published by
Bleichenbacher. The attacker can also obtain the same information by
observing the length of the plaintext. The current implementation
leaks the length of the plaintext through timing and memory access
patterns.
This commit is a first step towards fixing this leak. It reduces the
leak to a single memmove call inside the working buffer.
Make the function more robust by taking an arbitrary zero/nonzero
argument instead of insisting on zero/all-bits-one. Update and fix its
documentation.
mbedtls_rsa_rsaes_pkcs1_v15_decrypt took care of calculating the
padding length without leaking the amount of padding or the validity
of the padding. However it then skipped the copying of the data if the
padding was invalid, which could allow an adversary to find out
whether the padding was valid through precise timing measurements,
especially if for a local attacker who could observe memory access via
cache timings.
Avoid this leak by always copying from the decryption buffer to the
output buffer, even when the padding is invalid. With invalid padding,
copy the same amount of data as what is expected on valid padding: the
minimum valid padding size if this fits in the output buffer,
otherwise the output buffer size. To avoid leaking payload data from
an unsuccessful decryption, zero the decryption buffer before copying
if the padding was invalid.
Deprecate mbedtls_hmac_drbg_update (which returns void) in favor of a
new function mbedtls_hmac_drbg_update_ret which reports error. The old
function is not officially marked as deprecated in this branch because
this is a stable maintenance branch.
Deprecate mbedtls_ctr_drbg_update (which returns void) in favor of a
new function mbedtls_ctr_drbg_update_ret which reports error. The old
function is not officially marked as deprecated in this branch because
this is a stable maintenance branch.
When writing a private EC key, use a constant size for the private
value, as specified in RFC 5915. Previously, the value was written
as an ASN.1 INTEGER, which caused the size of the key to leak
about 1 bit of information on average, and could cause the value to be
1 byte too large for the output buffer.
The debugging functions
- mbedtls_debug_print_ret,
- mbedtls_debug_print_buf,
- mbedtls_debug_print_mpi, and
- mbedtls_debug_print_crt
return immediately if the SSL configuration bound to the
passed SSL context is NULL, has no debugging functions
configured, or if the debug threshold is below the debugging
level.
However, they do not check whether the provided SSL context
is not NULL before accessing the SSL configuration bound to it,
therefore leading to a segmentation fault if it is.
In contrast, the debugging function
- mbedtls_debug_print_msg
does check for ssl != NULL before accessing ssl->conf.
This commit unifies the checks by always returning immediately
if ssl == NULL.
`mbedtls_ssl_get_record_expansion()` is supposed to return the maximum
difference between the size of a protected record and the size of the
encapsulated plaintext.
Previously, it did not correctly estimate the maximum record expansion
in case of CBC ciphersuites in (D)TLS versions 1.1 and higher, in which
case the ciphertext is prefixed by an explicit IV.
This commit fixes this bug. Fixes#1914.
In `mbedtls_ccm_self_test()`, enforce input and output
buffers sent to the ccm API to be contigous and aligned,
by copying the test vectors to buffers on the stack.
- in x509_profile_check_pk_alg
- in x509_profile_check_md_alg
- in x509_profile_check_key
and in ssl_cli.c : unsigned char gets promoted to signed integer
In ecp_mul_comb(), if (!p_eq_g && grp->T == NULL) and then ecp_precompute_comb() fails (which can
happen due to OOM), then the new array of points T will be leaked (as it's newly allocated, but
hasn't been asigned to grp->T yet).
Symptom was a memory leak in ECDHE key exchange under low memory conditions.
The length to the debug message could conceivably leak through the time it
takes to print it, and that length would in turn reveal whether padding was
correct or not.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function, and the location where we read the MAC, give information
about that.
A local attacker could gain information about that by observing via a
cache attack whether the bytes at the end of the record (at the location of
would-be padding) have been read during MAC verification (computation +
comparison).
Let's make sure they're always read.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function gives information about that.
Information about this length (modulo the MD/SHA block size) can be deduced
from how much MD/SHA padding (this is distinct from TLS-CBC padding) is used.
If MD/SHA padding is read from a (static) buffer, a local attacker could get
information about how much is used via a cache attack targeting that buffer.
Let's get rid of this buffer. Now the only buffer used is the internal MD/SHA
one, which is always read fully by the process() function.
Move definition of `MBEDTLS_CIPHER_MODE_STREAM` to header file
(`mbedtls_cipher_internal.h`), because it is used by more than
one file. Raised by TrinityTonic in #1719
