Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
PSA and SSL programs are PSA clients thus should use
psa_key_id_t as the type for key identifiers, not
mbedtls_svc_key_id_t.
As a consequence, PSA, ssl_server2 and ssl_client2
programs cannot compile and must not be compiled if
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER is defined.
Thus, add MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
compilation guard to those programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move all the PSA crypto APIs using key handles
to use key identifiers but psa_key_open() and
psa_key_close(). This is done without modifying
any test as key handles and key identifiers are
now the same.
Update the library modules using PSA crypto APIs
to get rid of key handles.
Programs and unit tests are updated to not use
key handles in subsequent commits, not in this
one.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As handles are now key identifiers, a handle may be
valid now even if it does not refer to any key
known to the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers are introduced in
PSA Crypto API v1.0.0. They are returned by the APIs
when importing or generating or deriving a volatile key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to pass existing tests like test_psa_crypto_config_basic
and test_psa_crypto_config_no_driver, all the new features need
to be enabled in the default crypto_config.h file. This change
enables those features by default and updates the other new
tests to compensate for everything being enabled by disabling
some features for some of the tests as needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Since the symmetric only reference config is utilizing PSA
crypto library builds, the config file needs to included the
new config_psa.h so that all the PSA feature macros are setup
properly for the test.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated some of the test names to better reflect what they are testing.
Expanded the testing around RSA feature for PSA crypto config. Updated
the test script to support backing up and restoring the
include/psa/crypto_config.h file so that features can be individually
setup for each unique feature test.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In the original attempt to add RSA support to PSA crypto config was too
generic. This set of changes adds support for the following RSA features:
PSA_WANT_ALG_RSA_PKCS1V15_CRYPT, PSA_WANT_ALG_RSA_PKCS1V15_SIGN,
PSA_WANT_ALG_RSA_OAEP, PSA_WANT_ALG_RSA_PSS, PSA_WANT_KEY_TYPE_RSA_KEY_PAIR,
and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY.
There were also some updates to ensure the proper inclusion of PSA crypto
library code when certain features are enabled. These updates were made to
address warnings and errors in builds from the new tests for these
features being added for PSA crypto configuration.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This phase adds in support for the following features being
added to the list of features that can be configured in the
include/psa/crypto_config.h header file using the PSA_WANT_ALG_xxx
macros: ECDH, HMAC, HKDF, and RSA. These changes include changes to
the PSA crypto library to use the appropriate new guards that
will allow the feature to be compiled in or out either using
new PSA_WANT_ALG_xxx or the previous MBEDTLS_xxx macros.
For HKDF and HMAC, most of the PSA library code did not have a
specific matching MBEDTLS_xxx macro for that feature, but was instead
using the generic dependent MBEDTLS_MD_C macro. The ECDH and RSA
features more closely aligned with a direct replacement with a similar
macro.
The new tests for RSA, HMAC, and HKDF would normally unset additional
dependent macros, but when attempting to implement that level of
testing it required removal of too many core features like MD_C, PK_C,
ECP_C and other low level features. This may point to additional phases of
work to complete the transition of these features to the new model.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add a build with MBEDTLS_ERROR_STRERROR_DUMMY but not MBEDTLS_ERROR_C.
Previously, both options were enabled by default, but
MBEDTLS_ERROR_STRERROR_DUMMY only matters when MBEDTLS_ERROR_C is
enabled, so its effect was not tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document that enabling MBEDTLS_PSA_CRYPTO_CONFIG requires including
mbedtls/config_psa.h from the configuration file (mbedtls/config.h or
MBEDTLS_USER_CONFIG_FILE).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In old-style configuration, do not include mbedtls/config_psa.h from
mbedtls/config.h.
The inclusion should not and did not break any code, but it caused our
testing to miss a break of backward compatibility (fixed in "Include
config_psa.h from psa/crypto.h"). If users have their own config.h
which enabled MBEDTLS_PSA_CRYPTO_C and worked prior to the creation of
config_psa.h and MBEDTLS_PSA_CRYPTO_CONFIG, their config.h must keep
working. By including config_psa.h from config.h in the legacy case,
we weren't testing the legacy configuration mechanism adequately.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Two sample configuration file were not being tested:
config-no-entropy.h and config-psa-crypto.h. Add them.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
<string.h> is actually needed when MBEDTLS_ERROR_C is enabled and not
when only MBEDTLS_ERROR_STRERROR_DUMMY is enabled.
Fix#3866.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the new PSA crypto configuration mechanism MBEDTLS_PSA_CRYPTO_CONFIG
is disabled, legacy configurations must keep working, even if they don't
include the new header file mbedtls/config_psa.h. Code that uses or
implements PSA crypto interfaces needs some of the symbols defined by the
new header file. Therefore, include the new header file via PSA crypto
headers, which are included everywhere mbedtls/config_psa.h is needed.
Include it early, in psa/crypto_platform.h, just after including
mbedtls/config.h, so that its symbols are available wherever the symbols
from mbedtls/config.h is available.
This fixes the unit tests with configs/config-psa-crypto.h: some unit
tests were failing, revealing that library features controlled with
the new symbols were no longer getting built.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With key usage based on key identifiers and not
key handles (openless APIs), volatile keys will
also have a key identifier. Thus, isolate key
identifier validation from key persistence
validation to clarify that key identifiers
are not specific to persistent keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
CMake versions less than 3.0 do not support the `target_sources`
command. In order to be able to support v2.8.12.2 of cmake, directly
set the SOURCES property instead of using the target_sources command.
A future patch could reverse this, if the project decides to forgo
support for cmake versions less than 3.0.
Fixes#3801
Signed-off-by: David Brown <david.brown@linaro.org>
