This patch modifies the function mbedtls_gcm_self_test() function to
ensure that AES-GCM-192 tests are only run if the key size is supported
by the available implementation. This is useful when using
MBEDTLS_AES_ALT as some hardware crypto accelerators might not support
AES-192.
This patch modifies the function mbedtls_aes_selftest() function to
ensure that AES-192 tests are only run if the key size is supported by
the available implementation. This is useful when using MBEDTLS_AES_ALT
as some hardware crypto accelerators might not support AES-192.
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
This commit changes the behaviour of mbedtls_ssl_parse_certificate
to make the two authentication modes MBEDTLS_SSL_VERIFY_REQUIRED and
MBEDTLS_SSL_VERIFY_OPTIONAL be in the following relationship:
Mode == MBEDTLS_SSL_VERIFY_REQUIRED
<=> Mode == MBEDTLS_SSL_VERIFY_OPTIONAL + check verify result
Also, it changes the behaviour to perform the certificate chain
verification even if the trusted CA chain is empty. Previously, the
function failed in this case, even when using optional verification,
which was brought up in #864.
* gilles/IOTSSL-1330/development:
Changelog entry for the bug fixes
SSLv3: when refusing renegotiation, stop processing
Ignore failures when sending fatal alerts
Cleaned up double variable declaration
Code portability fix
Added changelog entry
Send TLS alerts in many more cases
Skip all non-executables in run-test-suites.pl
SSL tests: server requires auth, client has no certificate
Balanced braces across preprocessor conditionals
Support setting the ports on the command line
By default, keep allowing SHA-1 in key exchange signatures. Disabling
it causes compatibility issues, especially with clients that use
TLS1.2 but don't send the signature_algorithms extension.
SHA-1 is forbidden in certificates by default, since it's vulnerable
to offline collision-based attacks.
In the TLS test client, allow SHA-1 as a signature hash algorithm.
Without this, the renegotation tests failed.
A previous commit had allowed SHA-1 via the certificate profile but
that only applied before the initial negotiation which includes the
signature_algorithms extension.
Default to forbidding the use of SHA-1 in TLS where it is unsafe: for
certificate signing, and as the signature hash algorithm for the TLS
1.2 handshake signature. SHA-1 remains allowed in HMAC-SHA-1 in the
XXX_SHA ciphersuites and in the PRF for TLS <= 1.1.
For easy backward compatibility for use in controlled environments,
turn on the MBEDTLS_TLS_DEFAULT_ALLOW_SHA1 compiled-time option.
* hanno/sig_hash_compatibility:
Improve documentation
Split long lines
Remember suitable hash function for any signature algorithm.
Introduce macros and functions to characterize certain ciphersuites.
Fixed a bug in ssl_srv.c when parsing TLS_FALLBACK_SCSV in the
ciphersuite list that caused it to miss it sometimes. Reported by Hugo
Leisink as issue #810. Fix initially by @andreasag01; this commit
isolates the bug fix and adds a non-regression test.
This patch modifies the following 2 functions in the AES module to
change the return type from void to int:
* mbedtls_aes_encrypt() -> mbedtls_internal_aes_encrypt()
* mbedtls_aes_decrypt() -> mbedtls_internal_aes_decrypt()
This change is necessary to allow users of MBEDTLS_AES_ALT,
MBEDTLS_AES_DECRYPT_ALT and MBEDTLS_AES_ENCRYPT_ALT to return an error
code when replacing the default with their own implementation, e.g.
a hardware crypto accelerator.
The RSA private key functions rsa_rsaes_pkcs1_v15_decrypt and
rsa_rsaes_oaep_decrypt put sensitive data (decryption results) on the
stack. Wipe it before returning.
Thanks to Laurent Simon for reporting this issue.
The sliding window exponentiation algorithm is vulnerable to
side-channel attacks. As a countermeasure we add exponent blinding in
order to prevent combining the results of different measurements.
This commit handles the case when the Chinese Remainder Theorem is used
to accelerate the computation.
The sliding window exponentiation algorithm is vulnerable to
side-channel attacks. As a countermeasure we add exponent blinding in
order to prevent combining the results of fifferent measurements.
This commits handles the case when the Chinese Remainder Theorem is NOT
used to accelerate computations.
According to RFC5246 the server can indicate the known Certificate
Authorities or can constrain the aurhorisation space by sending a
certificate list. This part of the message is optional and if omitted,
the client may send any certificate in the response.
The previous behaviour of mbed TLS was to always send the name of all the
CAs that are configured as root CAs. In certain cases this might cause
usability and privacy issues for example:
- If the list of the CA names is longer than the peers input buffer then
the handshake will fail
- If the configured CAs belong to third parties, this message gives away
information on the relations to these third parties
Therefore we introduce an option to suppress the CA list in the
Certificate Request message.
Providing this feature as a runtime option comes with a little cost in
code size and advantages in maintenance and flexibility.
This commit changes `ssl_parse_signature_algorithms_ext` to remember
one suitable ( := supported by client and by our config ) hash
algorithm per signature algorithm.
It also modifies the ciphersuite checking function
`ssl_ciphersuite_match` to refuse a suite if there
is no suitable hash algorithm.
Finally, it adds the corresponding entry to the ChangeLog.
The routine `mbedtls_ssl_write_server_key_exchange` heavily depends on
what kind of cipher suite is active: some don't need a
ServerKeyExchange at all, some need (EC)DH parameters but no server
signature, some require both. Each time we want to restrict a certain
piece of code to some class of ciphersuites, it is guarded by a
lengthy concatentation of configuration checks determining whether at
least one of the relevant cipher suites is enabled in the config; on
the code level, it is guarded by the check whether one of these
cipher suites is the active one.
To ease readability of the code, this commit introduces several helper
macros and helper functions that can be used to determine whether a
certain class of ciphersuites (a) is active in the config, and
(b) contains the currently present ciphersuite.
With this commit the Elliptic Curve Point interface is rewised. Two
compile time options has been removed to simplify the interface and
the function names got a new prefix that indicates that these functions
are for internal use and not part of the public interface.
The intended use of the abstraction layer for Elliptic Curve Point
arithmetic is to enable using hardware cryptographic accelerators.
These devices are a shared resource and the driver code rarely provides
thread safety.
This commit adds mutexes to the abstraction layer to protect the device
in a multi-threaded environment.
The primary use case behind providing an abstraction layer to enable
alternative Elliptic Curve Point arithmetic implementation, is making
use of cryptographic acceleration hardware if it is present.
To provide thread safety for the hardware accelerator we need a mutex
to guard it.
The compile time macros enabling the initialisation and deinitialisation
in the alternative Elliptic Curve Point arithmetic implementation had
names that did not end with '_ALT' as required by check-names.sh.
This patch introduces some additional checks in the PK module for 64-bit
systems only. The problem is that the API functions in the PK
abstraction accept a size_t value for the hashlen, while the RSA module
accepts an unsigned int for the hashlen. Instead of silently casting
size_t to unsigned int, this change checks whether the hashlen overflows
an unsigned int and returns an error.
In many places in TLS handling, some code detects a fatal error, sends
a fatal alert message, and returns to the caller. If sending the alert
fails, then return the error that triggered the alert, rather than
overriding the return status. This effectively causes alert sending
failures to be ignored. Formerly the code was inconsistently sometimes
doing one, sometimes the other.
In general ignoring the alert is the right thing: what matters to the
caller is the original error. A typical alert failure is that the
connection is already closed.
One case which remains not handled correctly is if the alert remains
in the output buffer (WANT_WRITE). Then it won't be sent, or will be
truncated. We'd need to either delay the application error or record
the write buffering notice; to be done later.
When provided with an empty line, mpi_read_file causes a numeric
underflow resulting in a stack underflow. This commit fixes this and
adds some documentation to mpi_read_file.
The modular inversion function hangs when provided with the modulus 1. This commit refuses this modulus with a BAD_INPUT error code. It also adds a test for this case.
The TLS client and server code was usually closing the connection in
case of a fatal error without sending an alert. This commit adds
alerts in many cases.
Added one test case to detect that we send the alert, where a server
complains that the client's certificate is from an unknown CA (case
tracked internally as IOTSSL-1330).
