This commit fixes the same warning fixed by baeedbf9, but without
wasting RAM. By casting `mbedtls_sha512_finish_ret()`, `padbuf`
could be kept 48 bytes long without triggering any warnings.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
GCC 11 generated a warning because `padbuf` was too small to be
used as an argument for `mbedtls_sha512_finish_ret`. The `output`
parameter of `mbedtls_sha512_finish_ret` has the type
`unsigned char[64]`, but `padbuf` was only 48 bytes long.
Even though `ssl_calc_finished_tls_sha384` uses only 48 bytes for
the hash output, the size of `padbuf` was increased to 64 bytes.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
In GCC 11, parameters declared as arrays in function prototypes
cannot be declared as pointers in the function definition. The
same is true for the other way around.
The definition of `mbedtls_aes_cmac_prf_128` was changed to match
its public prototype in `cmac.h`. The type `output` was
`unsigned char *`, now is `unsigned char [16]`.
In `ssl_tls.c`, all the `ssl_calc_verify_*` variants now use pointers
for the output `hash` parameter. The array parameters were removed
because those functions must be compatible with the function pointer
`calc_verify` (defined in `ssl_internal.h`).
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Rename functions to get a key slot:
. to make their naming more consistent
. to emphasize that those functions set a lock on the
key slot they return to protect it from being wiped
out and re-used while some part of the library
is accessing it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move the return of the identifier of a created key from
psa_start_key_creation() to psa_finish_key_creation().
That way in case of creation error, it is less likely to
return the identifier that was temporarily assigned to
the key while trying to create it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Decrement the slot access count in psa_finish_key_creation()
when the finalization succeeds instead of in functions calling
psa_finish_key_creation(). That way the decrementation cannot
be forgotten and it reduces the code size.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Special handling of volatile key identifiers is not
needed eventually, they can be handled just as
key identifier in the vendor range.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In case of a volatile key identifier, no need to check first
the validity of the key identifier, a volatile key identifier
is valid.
Move to a forward search for non-volatile key identifiers as
now key slots with small index are allocated first by
psa_get_empty_key_slot().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Moved new check_crypto_config.h file from include/psa to library
directory and the file is now included from *.c instead of the
crypto_config.h file. Fixed guards in PSA crypto library based
on review comments for new PSA crypto config features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Complement to 0a8352b4: peer_pmslen is not initialized when decryption
fails, so '|= peer_pmslen' may access uninitialized memory, as indicated
by Frama-C/Eva.
Co-authored-by: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: André Maroneze <maroneze@users.noreply.github.com>
Simplify the guards on MBEDTLS_ERROR_C and MBEDTLS_ERROR_STRERROR_DUMMY.
No longer include superfluous headers and definition: platform.h is
only needed for MBEDTLS_ERROR_C; time_t is not needed at all.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was one lingering MBEDTLS_MD_C that needed to be removed since
it is no longer needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Revised the placement of various new MBEDTLS_PSA_BUILTIN_xxx
guards based on review comments. Corrected guards in psa
test driver to use _ACCEL version instead of _BUILTIN version.
Updated check_config_psa.h to include additional dependency checks
for more algorithms. Renamed some of the new tests to be a little
more clear on the purpose.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When psa_close/destroy/purge_key is called, do not
reset a key slot containing the description
of a persistent key if it is currently accessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a counter of unaccessed slots and use it
in tests to check that at the end of PSA tests
all key slot are unaccessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add key slot access counter to be able to
state if a key slot containing the description
of a permanent key can be reset or reset
and re-used.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move all the PSA crypto APIs using key handles
to use key identifiers but psa_key_open() and
psa_key_close(). This is done without modifying
any test as key handles and key identifiers are
now the same.
Update the library modules using PSA crypto APIs
to get rid of key handles.
Programs and unit tests are updated to not use
key handles in subsequent commits, not in this
one.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers are introduced in
PSA Crypto API v1.0.0. They are returned by the APIs
when importing or generating or deriving a volatile key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In the original attempt to add RSA support to PSA crypto config was too
generic. This set of changes adds support for the following RSA features:
PSA_WANT_ALG_RSA_PKCS1V15_CRYPT, PSA_WANT_ALG_RSA_PKCS1V15_SIGN,
PSA_WANT_ALG_RSA_OAEP, PSA_WANT_ALG_RSA_PSS, PSA_WANT_KEY_TYPE_RSA_KEY_PAIR,
and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY.
There were also some updates to ensure the proper inclusion of PSA crypto
library code when certain features are enabled. These updates were made to
address warnings and errors in builds from the new tests for these
features being added for PSA crypto configuration.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
