Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
Add test cases for SSL asynchronous signature to ssl-opt.sh:
* Delay=0,1 to test the sequences of calls to f_async_resume
* Test fallback when the async callbacks don't support that key
* Test error injection at each stage
* Test renegotiation
New options in ssl_server2 to use the asynchronous private key
operation feature.
Features: resume delay to call resume more than once; error injection
at each stage; renegotiation support.
The idea is to use the simple program that is expected to be modified
rarely to set a breakpoint in a specific line and check that the
function mbedtls_zeroize() does actually set the buffer to 0 and is not
optimised out by the compiler.
Also, introduce MBEDTLS_EINTR locally in net_sockets.c
for the platform-dependent return code macro used by
the `select` call to indicate that the poll was interrupted
by a signal handler: On Unix, the corresponding macro is EINTR,
while on Windows, it's WSAEINTR.
Previously, the idling loop in ssl_server2 didn't check whether
the underlying call to mbedtls_net_poll signalled that the socket
became invalid. This had the consequence that during idling, the
server couldn't be terminated through a SIGTERM, as the corresponding
handler would only close the sockets and expect the remainder of
the program to shutdown gracefully as a consequence of this.
This was subsequently attempted to be fixed through a change
in ssl-opt.sh by terminating the server through a KILL signal,
which however lead to other problems when the latter was run
under valgrind.
This commit changes the idling loop in ssl_server2 and ssl_client2
to obey the return code of mbedtls_net_poll and gracefully shutdown
if an error occurs, e.g. because the socket was closed.
As a consequence, the server termination via a KILL signal in
ssl-opt.sh is no longer necessary, with the previous `kill; wait`
pattern being sufficient. The commit reverts the corresponding
change.
Initializing arrays using non-constant expressions is not permitted in
C89, and was causing errors when compiling with Metrowerks CodeWarrior
(for classic MacOS) in C89 mode. Clang also produces a warning when
compiling with '-Wc99-extensions':
test/benchmark.c:670:42: warning: initializer for aggregate is not a compile-time constant [-Wc99-extensions]
const unsigned char *dhm_P[] = { dhm_P_2048, dhm_P_3072 };
^~~~~~~~~~
test/benchmark.c:674:42: warning: initializer for aggregate is not a compile-time constant [-Wc99-extensions]
const unsigned char *dhm_G[] = { dhm_G_2048, dhm_G_3072 };
^~~~~~~~~~
Declaring the arrays as 'static' makes them constant expressions.
fixes#1353
The race goes this way:
1. ssl_recv() succeeds (ie no signal received yet)
2. processing the message leads to aborting handshake with ret != 0
3. reset ret if we were signaled
4. print error if ret is still non-zero
5. go back to net_accept() which can be interrupted by a signal
We print the error message only if the signal is received between steps 3 and
5, not when it arrives between steps 1 and 3.
This can cause failures in ssl-opt.sh where we check for the presence of "Last
error was..." in the server's output: if we perform step 2, the client will be
notified and exit, then ssl-opt.sh will send SIGTERM to the server, but if it
didn't get a chance to run and pass step 3 in the meantime, we're in trouble.
The purpose of step 3 was to avoid spurious "Last error" messages in the
output so that ssl-opt.sh can check for a successful run by the absence of
that message. However, it is enough to suppress that message when the last
error we get is the one we expect from being interrupted by a signal - doing
more could hide real errors.
Also, improve the messages printed when interrupted to make it easier to
distinguish the two cases - this could be used in a testing script wanted to
check that the server doesn't see the client as disconnecting unexpectedly.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
1) `mbedtls_rsa_import_raw` used an uninitialized return
value when it was called without any input parameters.
While not sensible, this is allowed and should be a
succeeding no-op.
2) The MPI test for prime generation missed a return value
check for a call to `mbedtls_mpi_shift_r`. This is neither
critical nor new but should be fixed.
3) Both the RSA keygeneration example program and the
RSA test suites contained code initializing an RSA context
after a potentially failing call to CTR DRBG initialization,
leaving the corresponding RSA context free call in the
cleanup section of the respective function orphaned.
While this defect existed before, Coverity picked up on
it again because of newly introduced MPI's that were
also wrongly initialized only after the call to CTR DRBG
init. The commit fixes both the old and the new issue
by moving the initializtion of both the RSA context and
all MPI's prior to the first potentially failing call.
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
MSVC rightfully complained that there was some conversion from `size_t`
to `unsigned int` that could come with a loss of data. This commit
re-types the corresponding struct field `ctx_buffer::len` to `size_t`.
Also, the function `ctx_buffer_append` has an integer return value
which is supposed to be the (positive) length of the appended data
on success, and a check is inserted that the data to be appended does
not exceed MAX_INT in length.
Don't mangle arguments containing spaces and other special characters,
pass them unchanged to the proxy or server as applicable.
More robust parsing of server parameters: don't hit on partial words;
use ssl_server2's default values.
Minor style improvements.
The UDP proxy corrupts application data at the end of the datagram. If
there are multiple DTLS records within the same datagram, this leads
to the wrong message being corrupted. This commit always corrupts the
beginning of the message to prevent this.
Overall, the UDP proxy needs reworking if it is supposed to reliably
support multiple records within a single datagram, because it
determines its actions from the type of the first record in the
current datagram only.
This commit provides the new option pack=TIME for the udp proxy
./programs/test/udp_proxy. If used, udp packets with the same
destination will be queued and concatenated for up to TIME
milliseconds before being delivered.
This is useful to test how mbed TLS's deals with multiple DTLS records
within a single datagram.
This commit introduces the script `programs/test/udp_proxy_wrapper.sh` which can
be used to wrap the SSL server binary `programs/ssl/ssl_server2` by the UDP
proxy application `programs/test/udp_proxy` while maintaining the same
interface from the command line.
Specifically, given UDP proxy arguments ARGS_UDP and SSL server arguments
ARGS_SSL, the command line
> ./udp_proxy_wrapper.sh ARGS_UDP -- ARGS_SSL
behaves like
> ./ssl_server2 ARGS_SSL
wrapped by
> ./udp_proxy ARGS_UDP
The motivation and benefit of this is that scripts like `ssl-opt.sh` can be used
with the server command line `P_SRV` modified to `./udp_proxy_wrapper.sh
ARGS_UDP -- DEFAULT_ARGS_SSL` which will result in all tests being executed for
an SSL server behind a UDP proxy.
This commit adds the following command line options to programs/x509/cert_write:
- version (val 1, 2, 3): Set the certificate's version (v1, v2, v3)
- authority_identifier (val 0, 1): Enable or disable the addition of the
authority identifier extension.
- subject_identifier (val 0, 1): Enable or disable the addition of the
subject identifier extension.
- basic_constraints (val 0, 1): Enable or disable the addition of the
basic constraints extension.
- md (val MD5, SHA1, SHA256, SHA512): Set the hash function used
when creating the CRT.
