Genertae test_suite_psa_crypto_generate_key.generated.data.
Use test_suite_psa_crypto_generate_key.function as a test function.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
At least twice, we added a classification flag but forgot to test it in the
relevant test functions. Add some protection so that this doesn't happen
again. In each classification category, put a macro xxx_FLAG_MASK_PLUS_ONE
at the end. In the corresponding test function, keep track of the flags that
are tested, and check that their mask is xxx_FLAG_MASK_PLUS_ONE - 1 which is
all the bits of the previous flags set.
Now, if we add a flag without testing it, the test
TEST_EQUAL( classification_flags_tested, xxx_FLAG_MASK_PLUS_ONE - 1 )
will fail. It will also fail if we make the set of flag numbers
non-consecutive, which is ok.
This reveals that three algorithm flags had been added but not tested (in
two separate occasions). Also, one key type flag that is no longer used by
the library was still defined but not tested, which is not a test gap but is
inconsistent. It's for DSA, which is relevant to the PSA encoding even if
Mbed TLS doesn't implement it, so keep the flag and do test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The status of signature wildcards with respect to PSA_ALG_IS_HASH_AND_SIGN
is unclear in the specification. A wildcard is usually instantiated with a
specific hash, making the implementation hash-and-sign, but it could also be
instantiated with a non-hash-and-sign algorithm. For the time being, go with
what's currently implemented, which is that they are considered
hash-and-sign.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Only tested for algorithms for which we support HMAC, since that's all we
use PSA_HASH_BLOCK_LENGTH for at the moment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Set the build type to Release (-O2) when running CPU-intensive tests (ssl-opt,
or unit tests with debug features). A build type of Check (-Os) would be best
when the main objective of the build is to check for build errors or warnings
and there aren't many tests to run; in this commit there are no such test
cases to change. Only use cmake with no build type (which results in not
passing a -O option, and thus missing some GCC warnings) when exercising cmake
features.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use Release mode (-O2) for component_test_full_cmake_clang which runs SSL
tests.
To have some coverage with Check mode (which enables more compiler warnings
but compiles with -Os), change a few other builds that only run unit tests
at most to Check mode.
Don't add any new builds, to keep the total build volume down. We don't need
extensive coverage of all combinations, just a reasonable set.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SSL testing benefits from faster executables, so use -O2 rather than -O1.
Some builds use -O1, but that's intended for jobs that only run unit tests,
where the build takes longer than the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_ALG_RSA_PSS algorithm now accepts only the same salt length for
verification that it produces when signing, as documented.
Fixes#4946.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the following combinations:
* 1024-bit key, SHA-256, salt=0
* 1024-bit key, SHA-256, salt=31 (1 byte shorter than standard)
* 1024-bit key, SHA-256, salt=32 (standard length)
* 1024-bit key, SHA-256, salt=94 (maximum possible length)
* 1024-bit key, SHA-512, salt=61 (1 byte shorter than standard)
* 1024-bit key, SHA-512, salt=62 (standard = maximum possible length)
* 528-bit key, SHA-512, salt=0 (only possible length)
Test psa_verify_hash() for both PSA_ALG_RSA_PSS and PSA_ALG_RSA_PSS_ANY_SALT
with all of these combinations. For psa_verify_message(), just test once
with the standard length and once with a different length.
Note that as of this commit, both PSA_ALG_RSA_PSS and
PSA_ALG_RSA_PSS_ANY_SALT accept any salt length during verification, hence
all the new test cases are positive.
The verify test cases were generated using the Python script below.
```
from Cryptodome import Hash
from Cryptodome.Hash import SHA512
from Cryptodome import PublicKey
from Cryptodome.PublicKey import RSA
from Cryptodome.Signature import pss
key = {
528: RSA.import_key(bytes.fromhex("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")),
1024: RSA.import_key(bytes.fromhex("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")),
}
hash_module = {
256: Hash.SHA256,
512: Hash.SHA512,
}
def print_test_case(remark, pub, kbits, hbits, input, output):
key_hex = pub.hex()
input_hex = input.hex()
output_hex = output.hex()
print(f"""\
PSA verify hash: RSA-{kbits} PSS SHA-{hbits}, {remark}
depends_on:PSA_WANT_ALG_RSA_PSS:PSA_WANT_ALG_SHA_{hbits}:PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY:MBEDTLS_PK_PARSE_C:MBEDTLS_MD_C
verify_hash:PSA_KEY_TYPE_RSA_PUBLIC_KEY:"{key_hex}":PSA_ALG_RSA_PSS(PSA_ALG_SHA_{hbits}):"{input_hex}":"{output_hex}"
PSA verify hash: RSA-{kbits} PSS-any-salt SHA-{hbits}, {remark}
depends_on:PSA_WANT_ALG_RSA_PSS:PSA_WANT_ALG_SHA_{hbits}:PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY:MBEDTLS_PK_PARSE_C:MBEDTLS_MD_C
verify_hash:PSA_KEY_TYPE_RSA_PUBLIC_KEY:"{key_hex}":PSA_ALG_RSA_PSS_ANY_SALT(PSA_ALG_SHA_{hbits}):"{input_hex}":"{output_hex}"
""")
def rand(n):
return bytes(x & 0xff for x in range(n))
def test_case(kbits, hbits, slen):
priv = key[kbits]
pub_spki = priv.publickey().export_key('DER')
pub_raw = PublicKey._expand_subject_public_key_info(pub_spki)[1]
hash_op = hash_module[hbits].new(b'abc')
digest = hash_op.copy().digest()
output = pss.new(priv, salt_bytes=slen, rand_func=rand).sign(hash_op)
print_test_case(f"slen={slen}", pub_raw, kbits, hbits, digest, output)
test_case(1024, 256, 0)
test_case(1024, 256, 31)
test_case(1024, 256, 32)
test_case(1024, 256, 94)
test_case(1024, 512, 61)
test_case(1024, 512, 62)
test_case(528, 512, 0)
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure the unique part fits in the 66 columns that the test runner displays.
Leave room for an additional distinguisher on signature key policy negative
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test cases strictly replicate a subset of the test cases for
PSA_ALG_RSA_PSS. The subset validates that PSA_ALG_RSA_PSS_ANY_SALT is
recognized wherever PSA_ALG_RSA_PSS is.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is a variant of PSA_ALG_RSA_PSS which currently has exactly the same
behavior, but is intended to have a different behavior when verifying
signatures.
In a subsequent commit, PSA_ALG_RSA_PSS will change to requiring the salt
length to be what it would produce when signing, as is currently documented,
whereas PSA_ALG_RSA_PSS_ANY_SALT will retain the current behavior of
allowing any salt length (including 0).
Changes in this commit:
* New algorithm constructor PSA_ALG_RSA_PSS_ANY_SALT.
* New predicates PSA_ALG_IS_RSA_PSS_STANDARD_SALT (corresponding to
PSA_ALG_RSA_PSS) and PSA_ALG_IS_RSA_PSS_ANY_SALT (corresponding to
PSA_ALG_RSA_PSS_ANY_SALT).
* Support for the new predicates in macro_collector.py (needed for
generate_psa_constant_names).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use case pattern matching instead of multiline split, given there is
only the well formatted PIDs to match on this should be safe.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
On machines with more modern kernels (>5.4 from testing so far) the
useage of -b seems to conflict with the usage of -p. Whilst the usage of
-b seems like a good idea to avoid blocks as we are tight looping on it,
the usage of -p seems to require the usage of stat() (specifically in
/proc) which -b forbids. All you get is a load of warnings
(suppressable by -w) but never a positive result, which means that all
servers are reported as "Failed to start". We are not keen on losing
-b, so instead parse the output of lsof (using -F to format it) to
check the if PIDs that it outputs match that we are looking for.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
digits is also a local variable in host_test.function, leading to compilers
complaining about that shadowing the global variable in
test_suite_base64.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is part of the definition of the encoding, not a choice of test
parameter, so keep it with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mask_of_range(), enc_char() and dec_value().
When constant-flow testing is enabled, verify that these functions are
constant-flow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When TEST_EQUAL fails, show the two numerical values in the test log (only
with host_test). The values are printed in hexa and signed decimal.
The arguments of TEST_EQUAL must now be integers, not pointers or floats.
The current implementation requires them to fit in unsigned long long
Signed values no larger than long long will work too. The implementation
uses unsigned long long rather than uintmax_t to reduce portability
concerns. The snprintf function must support "%llx" and "%lld".
For this purpose, add room for two lines of text to the mbedtls_test_info
structure. This adds 154 bytes of global data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Improve the code structure in case we want to add other similar conditions
later. Document better what we're doing, and document why we're doing it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Palliative for https://github.com/ARMmbed/mbedtls/issues/3377. If a test
case fails due to an unexpected resend, allow retrying, like in the case of
a client timeout.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This was causing some tests using the openssl s_client to not connect -
I suspect this was due to localhost (at least on my machine) resolving
to ::1 rather than 127.0.0.1. Note that the error seen would have been
that the session file specified with -sess_out did not get created.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Missing wildcards meant that some servers were not identified as DTLS,
which lead to port checking on TCP rather than UDP, and thus mistakenly
cancelling tests as the server had not come up.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Otherwise $COMMAND_LINE_COMPONENTS would try to expand wildcard patterns
based on files in the current directory.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Have simpler patterns related to 'test' (the central objective being to keep
going if 'make test' or 'tests/...' fails, but not if 'make tests' fails).
Add 'cd' as a can't-keep-going command.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Count invocations from 1 to n instead of n to 1.
Explain how changing the loop variable would cause an error if the function
was not executed in a subshell.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
all.sh restores **/Makefile from git in case the version in the worktree was
from doing a cmake in-tree build. Instead of doing this unconditionally, do
it only if the toplevel Makefile seems to have been automatically
generated (by cmake or otherwise, e.g. by mbedtls-prepare-build). This way
all.sh no longer silently wipes changes made to Makefile but not committed yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Back up the config files at the beginning of all.sh, rather than before each
component. In particular, create the backup before running cleanup for the
first time. This fixes#3139 (all.sh using a config.h.bak from a previous
job), and makes all.sh more robust against accidentally using a modified
config.h midway through because a component messed with the backup.
Use a different extension (*.all.bak rather than *.bak) for the backups.
This is necessary to ensure that auxiliary scripts such as depends*.pl that
make their own backup don't remove all.sh's backup, which the code from this
commit does not support.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate programs/test/cpp_dummy_build.cpp dynamically instead of
maintaining it manually. This removes the need to update it when the list of
headers changes.
Include all the headers unconditionally except for the ones that cannot be
included directly.
Support this dynamic generation both with make and with cmake.
Adapt all.sh accordingly. Remove the redundant C build from
component_build_default_make_gcc_and_cxx (it was also done in
component_test_default_out_of_box), leaving a component_test_make_cxx. Also
run the C++ program, because why not. Do this in the full configuration
which may catch a bit more problems in headers.
Fixes#2570 for good.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Thomas Daubney <>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't default to unbridled -j, which causes a load spike and isn't really
faster.
"Number of CPUs" is implemented here as a reasonable compromise between
portability, correctness and simplicity. This is just a default that can be
overridden by setting MAKEFLAGS in the environment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
redirect_out was no longer used and redirect_err was only used to
quiet dd. Change the dd invocation to only print diagnostics on
error (on platforms where this is possible).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is necessary to actually keep going and finish the
component-specific cleanup in component_test_cmake_out_of_source if
ssl-opt.err is non-empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In all.sh, when an explicit list of components is specified, error out
if one of the components is not known or not supported. Patterns that
happen to match zero components are still effectively ignored.
Fix#2783
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the `not` function, in keep-going mode, arrange to report the
failing command (rather than `"$@"`).
Note that the `!` keyword should not be used, because failures with
`!` are not reported properly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
