Generate programs/test/cpp_dummy_build.cpp dynamically instead of
maintaining it manually. This removes the need to update it when the list of
headers changes.
Include all the headers unconditionally except for the ones that cannot be
included directly.
Support this dynamic generation both with make and with cmake.
Adapt all.sh accordingly. Remove the redundant C build from
component_build_default_make_gcc_and_cxx (it was also done in
component_test_default_out_of_box), leaving a component_test_make_cxx. Also
run the C++ program, because why not. Do this in the full configuration
which may catch a bit more problems in headers.
Fixes#2570 for good.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Thomas Daubney <>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We previously introduced a safety check ensuring that if a datagram had
already been dropped twice, it would no longer be dropped or delayed
after that.
This missed an edge case: if a datagram is dropped once, it can be
delayed any number of times. Since "delay" is not defined in terms of
time (x seconds) but in terms of ordering with respect to other messages
(will be forwarded after the next message is forwarded), depending on
the RNG results this could result in an endless loop where all messages
are delayed until the next, which is itself delayed, etc. and no message
is ever forwarded.
The probability of this happening n times in a row is (1/d)^n, where d
is the value passed as delay=d, so for delay=5 and n=5 it's around 0.03%
which seems small but we still happened on such an occurrence in real
life:
tests/ssl-opt.sh --seed 1625061502 -f 'DTLS proxy: 3d, min handshake, resumption$'
results (according to debug statements added for the investigation) in
the ClientHello of the second handshake being dropped once then delayed
5 times, after which the client stops re-trying and the test fails for
no interesting reason.
Make sure this doesn't happen again by putting a cap on the number of
times we fail to forward a given datagram immediately.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The numerical identifier of the CID extension hasn't been settled yet
and different implementations use values from different drafts. Allow
configuring the value at compile time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Part of build_default_make_gcc_and_cxx compares the list of headers
included by `programs/test/cpp_dummy_build.cpp` and the actual headers
present. Add in the missing `mbedtls/psa_config.h` file to this list so
that this test passes.
Signed-off-by: David Brown <david.brown@linaro.org>
Declaring query_config() belongs with the query_config program, not in
ssl_test_lib.h, so move the declaration to a new header file
query_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If you pass a curve name to the benchmark program, the ECDH and ECDSA
benchmarks will only run for that particular curve. By default, all
curves are benchmarked.
To simplify the implementation, if you pass multiple curves, only the
last one will be benchmarked.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The driver interfaces described in crypto_accel_driver.h and
crypto_entropy_driver.h are no longer being worked on. We do not
intend to finish the design of these interfaces or to implement them
in Mbed TLS. They have been superseded by the unified driver
interface (docs/proposed/psa-driver-interface.md), which is being
actively worked on both to finalize the specification and to implement
it in Mbed TLS.
The partially implemented dynamic secure element interface is staying
for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Allow the user to configure PSA to use HMAC_DRBG even if CTR_DRBG is
available, or to explicitly select the hash algorithm to use for
HMAC_DRBG, by setting MBEDTLS_PSA_HMAC_DRBG_MD_TYPE in config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a configuration option for autonomous random drivers, i.e. PSA
crypto drivers that provide a random generator, that have their own
entropy source and do not support injecting entropy from another
source.
This commit only creates the configuration option. Subsequent commits
will add the implementation and tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In cmake version < 3.0, the SOURCES property on targets cannot be
modified after the target is defined. There are several instances in
the code that were using `target_properties()`, which is not available
in the older versions of cmake. Unfortunately, the workaround in #3801
(381c1078fc) assumes that this SOURCES property can be modified.
Work around this by building up any necessary sources before declaring
the target. This is more awkward, but needed to continue to be able to
support the old versions of cmake.
Fixes#3788.
Signed-off-by: David Brown <david.brown@linaro.org>
CMake versions less than 3.0 do not support the `target_sources`
command. In order to be able to support v2.8.12.2 of cmake, directly
set the SOURCES property instead of using the target_sources command.
A future patch could reverse this, if the project decides to forgo
support for cmake versions less than 3.0.
Fixes#3801
Signed-off-by: David Brown <david.brown@linaro.org>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
Since the recent changes required the addition of a new definition
in mbedtls/config.h, we also need to update query_config.c to account
for the new MBEDTLS_PSA_CRYPTO_CONFIG setting.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Use list of executables to:
- factorize the code to define executables
- highlight the similarities and differences of the executable definitions
- avoid list duplication
Use alphabetic order for executables in lists.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
