This commit changes the stack's behaviour when facing a record
with a non-matching CID. Previously, the stack failed in this
case, while now we silently skip over the current record.
Previously, ssl_get_next_record() would fetch 13 Bytes for the
record header and hand over to ssl_parse_record_header() to parse
and validate these. With the introduction of CID-based records, the
record length is not known in advance, and parsing and validating
must happen at the same time. ssl_parse_record_header() is therefore
rewritten in the following way:
1. Fetch and validate record content type and version.
2. If the record content type indicates a record including a CID,
adjust the record header pointers accordingly; here, we use the
statically configured length of incoming CIDs, avoiding any
elaborate CID parsing mechanism or dependency on the record
epoch, as explained in the previous commit.
3. Fetch the rest of the record header (note: this doesn't actually
fetch anything, but makes sure that the datagram fetched in the
earlier call to ssl_fetch_input() contains enough data).
4. Parse and validate the rest of the record header as before.
This commit modifies the code surrounding the invocations of
ssl_decrypt_buf() and ssl_encrypt_buf() to deal with a change
of record content type during CID-based record encryption/decryption.
mbedtls_ssl_context contains pointers in_buf, in_hdr, in_len, ...
which point to various parts of the header of an incoming TLS or
DTLS record; similarly, there are pointers out_buf, ... for
outgoing records.
This commit adds fields in_cid and out_cid which point to where
the CID of incoming/outgoing records should reside, if present,
namely prior to where the record length resides.
Quoting https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04:
The DTLSInnerPlaintext value is then encrypted and the CID added to
produce the final DTLSCiphertext.
struct {
ContentType special_type = tls12_cid; /* 25 */
ProtocolVersion version;
uint16 epoch;
uint48 sequence_number;
opaque cid[cid_length]; // New field
uint16 length;
opaque enc_content[DTLSCiphertext.length];
} DTLSCiphertext;
For outgoing records, out_cid is set in ssl_update_out_pointers()
based on the settings in the current outgoing transform.
For incoming records, ssl_update_in_pointers() sets in_cid as if no
CID was present, and it is the responsibility of ssl_parse_record_header()
to update the field (as well as in_len, in_msg and in_iv) when parsing
records that do contain a CID. This will be done in a subsequent commit.
Finally, the code around the invocations of ssl_decrypt_buf()
and ssl_encrypt_buf() is adapted to transfer the CID from the
input/output buffer to the CID field in the internal record
structure (which is what ssl_{encrypt/decrypt}_buf() uses).
Note that mbedtls_ssl_in_hdr_len() doesn't need change because
it infers the header length as in_iv - in_hdr, which will account
for the CID for records using such.
Using the Connection ID extension increases the maximum record expansion
because
- the real record content type is added to the plaintext
- the plaintext may be padded with an arbitrary number of
zero bytes, in order to prevent leakage of information
through package length analysis. Currently, we always
pad the plaintext in a minimal way so that its length
is a multiple of 16 Bytes.
This commit adapts the various parts of the library to account
for that additional source of record expansion.
Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
With the introduction of the CID feature, the stack needs to be able
to handle a change of record content type during record protection,
which in particular means that the record content type check will
need to move or be duplicated.
This commit introduces a tiny static helper function which checks
the validity of record content types, which hopefully makes it
easier to subsequently move or duplicate this check.
With the introduction of the CID extension, the record content type
may change during decryption; we must therefore re-consider every
record content type check that happens before decryption, and either
move or duplicate it to ensure it also applies to records whose
real content type is only revealed during decryption.
This commit does this for the silent dropping of unexpected
ApplicationData records in DTLS. Previously, this was caught
in ssl_parse_record_header(), returning
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD which in ssl_get_next_record()
would lead to silent skipping of the record.
When using CID, this check wouldn't trigger e.g. when delayed
encrypted ApplicationData records come on a CID-based connection
during a renegotiation.
This commit moves the check to mbedtls_ssl_handle_message_type()
and returns MBEDTLS_ERR_SSL_NON_FATAL if it triggers, which leads
so silent skipover in the caller mbedtls_ssl_read_record().
The SSL context structure mbedtls_ssl_context contains several pointers
ssl->in_hdr, ssl->in_len, ssl->in_iv, ssl->in_msg pointing to various
parts of the record header in an incoming record, and they are setup
in the static function ssl_update_in_pointers() based on the _expected_
transform for the next incoming record.
In particular, the pointer ssl->in_msg is set to where the record plaintext
should reside after record decryption, and an assertion double-checks this
after each call to ssl_decrypt_buf().
This commit removes the dependency of ssl_update_in_pointers() on the
expected incoming transform by setting ssl->in_msg to ssl->in_iv --
the beginning of the record content (potentially including the IV) --
and adjusting ssl->in_msg after calling ssl_decrypt_buf() on a protected
record.
Care has to be taken to not load ssl->in_msg before calling
mbedtls_ssl_read_record(), then, which was previously the
case in ssl_parse_server_hello(); the commit fixes that.
If a record exhibits an invalid feature only after successful
authenticated decryption, this is a protocol violation by the
peer and should hence lead to connection failure. The previous
code, however, would silently ignore such records. This commit
fixes this.
So far, the only case to which this applies is the non-acceptance
of empty non-AD records in TLS 1.2. With the present commit, such
records lead to connection failure, while previously, they were
silently ignored.
With the introduction of the Connection ID extension (or TLS 1.3),
this will also apply to records whose real content type -- which
is only revealed during authenticated decryption -- is invalid.
In contrast to other aspects of the Connection ID extension,
the CID-based additional data for MAC computations differs from
the non-CID case even if the CID length is 0, because it
includes the CID length.
Quoting the CID draft 04:
- Block Ciphers:
MAC(MAC_write_key, seq_num +
tls12_cid + // New input
DTLSPlaintext.version +
cid + // New input
cid_length + // New input
length_of_DTLSInnerPlaintext + // New input
DTLSInnerPlaintext.content + // New input
DTLSInnerPlaintext.real_type + // New input
DTLSInnerPlaintext.zeros // New input
)
And similar for AEAD and Encrypt-then-MAC.
While 'session hash' is currently unique, so suitable to prove that the
intended code path has been taken, it's a generic enough phrase that in the
future we might add other debug messages containing it in completely unrelated
code paths. In order to future-proof the accuracy of the test, let's use a
more specific string.
The previous comment used "TLS" as a shortcut for "TLS 1.0/1.1" which was
confusing. This partially reflected the names of the calc_verify/finished that
go ssl, tls (for 1.0/1.1) tls_shaxxx (for 1.2), but still it's clearer to be
explicit in the comment - and perhaps in the long term the function names
could be clarified instead.
This commit temporarily comments the copying of the negotiated CIDs
into the established ::mbedtls_ssl_transform in mbedtls_ssl_derive_keys()
until the CID feature has been fully implemented.
While mbedtls_ssl_decrypt_buf() and mbedtls_ssl_encrypt_buf() do
support CID-based record protection by now and can be unit tested,
the following two changes in the rest of the stack are still missing
before CID-based record protection can be integrated:
- Parsing of CIDs in incoming records.
- Allowing the new CID record content type for incoming records.
- Dealing with a change of record content type during record
decryption.
Further, since mbedtls_ssl_get_peer_cid() judges the use of CIDs by
the CID fields in the currently transforms, this change also requires
temporarily disabling some grepping for ssl_client2 / ssl_server2
debug output in ssl-opt.sh.
This commit modifies ssl_decrypt_buf() and ssl_encrypt_buf()
to include the CID into authentication data during record
protection.
It does not yet implement the new DTLSInnerPlaintext format
from https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04
When using this function to deserialize, it's not a problem to have a session
structure as input as we'll have one around anyway (most probably freshly
deserialised).
However for tests it's convenient to be able to build a transform without
having a session structure around.
Also, removing this structure from parameters makes the function signature
more uniform, the only exception left being the ssl param at the end that's
hard to avoid for now.
Configs with no DEBUG_C are use for example in test-ref-configs.pl, which also
runs parts of compat.sh or ssl-opt.sh on them, so the added 'ssl = NULL'
statements will be exercised in those tests at least.
Make it more explicit what's used. Unfortunately, we still need ssl as a
parameter for debugging, and because calc_verify wants it as a parameter (for
all TLS versions except SSL3 it would actually only need handshake, but SSL3
also accesses session_negotiate).
It's also because of calc_verify that we can't make it const yet, but see next
commit.
This commit adds tests exercising mutually inverse pairs of
record encryption and decryption transformations for the various
transformation types allowed in TLS: Stream, CBC, and AEAD.
The hash contexts `ssl_transform->md_ctx_{enc/dec}` are not used if
only AEAD ciphersuites are enabled. This commit removes them from the
`ssl_transform` struct in this case, saving a few bytes.
This commit guards code specific to AEAD, CBC and stream cipher modes
in `ssl_derive_keys` by the respective configuration flags, analogous
to the guards that are already in place in the record decryption and
encryption functions `ssl_decrypt_buf` resp. `ssl_decrypt_buf`.
Analogous to the previous commit, but concerning the record decryption
routine `ssl_decrypt_buf`.
An important change regards the checking of CBC padding:
Prior to this commit, the CBC padding check always read 256 bytes at
the end of the internal record buffer, almost always going past the
boundaries of the record under consideration. In order to stay within
the bounds of the given record, this commit changes this behavior by
always reading the last min(256, plaintext_len) bytes of the record
plaintext buffer and taking into consideration the last `padlen` of
these for the padding check. With this change, the memory access
pattern and runtime of the padding check is entirely determined by
the size of the encrypted record, in particular not giving away
any information on the validity of the padding.
The following depicts the different behaviors:
1) Previous CBC padding check
1.a) Claimed padding length <= plaintext length
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+------------------------------------...
| read for padding check ...
+------------------------------------...
|
contents discarded
from here
1.b) Claimed padding length > plaintext length
+----------------------------------------+----+
| Record plaintext buffer | PL |
+----------------------------------------+----+
+-------------------------...
| read for padding check ...
+-------------------------...
|
contents discarded
from here
2) New CBC padding check
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+---------------------------------------+
| read for padding check |
+---------------------------------------+
|
contents discarded
until here
The previous version of the record encryption function
`ssl_encrypt_buf` takes the entire SSL context as an argument,
while intuitively, it should only depend on the current security
parameters and the record buffer.
Analyzing the exact dependencies, it turned out that in addition
to the currently active `ssl_transform` instance and the record
information, the encryption function needs access to
- the negotiated protocol version, and
- the status of the encrypt-then-MAC extension.
This commit moves these two fields into `ssl_transform` and
changes the signature of `ssl_encrypt_buf` to only use an instance
of `ssl_transform` and an instance of the new `ssl_record` type.
The `ssl_context` instance is *solely* kept for the debugging macros
which need an SSL context instance.
The benefit of the change is twofold:
1) It avoids the need of the MPS to deal with instances of
`ssl_context`. The MPS should only work with records and
opaque security parameters, which is what the change in
this commit makes progress towards.
2) It significantly eases testing of the encryption function:
independent of any SSL context, the encryption function can
be passed some record buffer to encrypt alongside some arbitrary
choice of parameters, and e.g. be checked to not overflow the
provided memory.
The macro constant `MBEDTLS_SSL_MAC_ADD` defined in `ssl_internal.h`
defines an upper bound for the amount of space needed for the record
authentication tag. Its definition distinguishes between the
presence of an ARC4 or CBC ciphersuite suite, in which case the maximum
size of an enabled SHA digest is used; otherwise, `MBEDTLS_SSL_MAC_ADD`
is set to 16 to accomodate AEAD authentication tags.
This assignment has a flaw in the situation where confidentiality is
not needed and the NULL cipher is in use. In this case, the
authentication tag also uses a SHA digest, but the definition of
`MBEDTLS_SSL_MAC_ADD` doesn't guarantee enough space.
The present commit fixes this by distinguishing between the presence
of *some* ciphersuite using a MAC, including those using a NULL cipher.
For that, the previously internal macro `SSL_SOME_MODES_USE_MAC` from
`ssl_tls.c` is renamed and moved to the public macro
`MBEDTLS_SOME_MODES_USE_MAC` defined in `ssl_internal.h`.
Prior to this commit, the security parameter struct `ssl_transform`
contained a `ciphersuite_info` field pointing to the information
structure for the negotiated ciphersuite. However, the only
information extracted from that structure that was used in the core
encryption and decryption functions `ssl_encrypt_buf`/`ssl_decrypt_buf`
was the authentication tag length in case of an AEAD cipher.
The present commit removes the `ciphersuite_info` field from the
`ssl_transform` structure and adds an explicit `taglen` field
for AEAD authentication tag length.
This is in accordance with the principle that the `ssl_transform`
structure should contain the raw parameters needed for the record
encryption and decryption functions to work, but not the higher-level
information that gave rise to them. For example, the `ssl_transform`
structure implicitly contains the encryption/decryption keys within
their cipher contexts, but it doesn't contain the SSL master or
premaster secrets. Likewise, it contains an explicit `maclen`, while
the status of the 'Truncated HMAC' extension -- which determines the
value of `maclen` when the `ssl_transform` structure is created in
`ssl_derive_keys` -- is not contained in `ssl_transform`.
The `ciphersuite_info` pointer was used in other places outside
the encryption/decryption functions during the handshake, and for
these functions to work, this commit adds a `ciphersuite_info` pointer
field to the handshake-local `ssl_handshake_params` structure.
The `ssl_transform` security parameter structure contains opaque
cipher contexts for use by the record encryption/decryption functions
`ssl_decrypt_buf`/`ssl_encrypt_buf`, while the underlying key material
is configured once in `ssl_derive_keys` and is not explicitly dealt with
anymore afterwards. In particular, the key length is not needed
explicitly by the encryption/decryption functions but is nonetheless
stored in an explicit yet superfluous `keylen` field in `ssl_transform`.
This commit removes this field.
The SSL module accesses ECDH context members directly. This can't work
with the new context, where we can't make any assumption about the
implementation of the context.
This commit makes use of the new functions to avoid accessing ECDH
members directly. The only members that are still accessed directly are
the group ID and the point format and they are independent from the
implementation.
ssl_write_handshake_msg() includes the assertion that
`ssl->handshake != NULL` when handling a record which is
(a) a handshake message, and NOT
(b) a HelloRequest.
However, it later calls `ssl_append_flight()` for any
record different from a HelloRequest handshake record,
that is, records satisfying !(a) || !(b), instead of
(a) && !(b) as covered by the assertion (specifically,
CCS or Alert records).
Since `ssl_append_flight()` assumes that `ssl->handshake != NULL`,
this rightfully triggers static analyzer warnings.
This commit expands the scope of the assertion to check
that `ssl->handshake != NULL` for any record which is not
a HelloRequest.
This commit changes the behavior of the record decryption routine
`ssl_decrypt_buf()` in the following situation:
1. A CBC ciphersuite with Encrypt-then-MAC is used.
2. A record with valid MAC but invalid CBC padding is received.
In this situation, the previous code would not raise and error but
instead forward the decrypted packet, including the wrong padding,
to the user.
This commit changes this behavior to return the error
MBEDTLS_ERR_SSL_INVALID_MAC instead.
While erroneous, the previous behavior does not constitute a
security flaw since it can only happen for properly authenticated
records, that is, if the peer makes a mistake while preparing the
padded plaintext.
This commit ensures that buffers holding fragmented or
future handshake messages get zeroized before they are
freed when the respective handshake message is no longer
needed. Previously, the handshake message content would
leak on the heap.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
By the standard (RFC 6066, Sect. 4), the Maximum Fragment Length (MFL)
extension limits the maximum record payload size, but not the maximum
datagram size. However, not inferring any limitations on the MTU when
setting the MFL means that a party has no means to dynamically inform
the peer about MTU limitations.
This commit changes the function ssl_get_remaining_payload_in_datagram()
to never return more than
MFL - { Total size of all records within the current datagram }
thereby limiting the MTU to MFL + { Maximum Record Expansion }.
The function ssl_free_buffered_record() frees a future epoch record, if
such is present. Previously, it was called in mbedtls_handshake_free(),
i.e. an unused buffered record would be cleared at the end of the handshake.
This commit moves the call to the function ssl_buffering_free() responsible
for freeing all buffering-related data, and which is called not only at
the end of the handshake, but at the end of every flight. In particular,
future record epochs won't be buffered across flight boundaries anymore,
and they shouldn't.
The previous code appended messages to flights only if their handshake type,
as derived from the first byte in the message, was different from
MBEDTLS_SSL_HS_HELLO_REQUEST. This check should only be performed
for handshake records, while CCS records should immediately be appended.
In SSLv3, the client sends a NoCertificate alert in response to
a CertificateRequest if it doesn't have a CRT. This previously
lead to failure in ssl_write_handshake_msg() which only accepted
handshake or CCS records.
The previous code appended messages to flights only if their handshake type,
as derived from the first byte in the message, was different from
MBEDTLS_SSL_HS_HELLO_REQUEST. This check should only be performed
for handshake records, while CCS records should immediately be appended.
In SSLv3, the client sends a NoCertificate alert in response to
a CertificateRequest if it doesn't have a CRT. This previously
lead to failure in ssl_write_handshake_msg() which only accepted
handshake or CCS records.
Previous commits introduced the field `total_bytes_buffered`
which is supposed to keep track of the cumulative size of
all heap allocated buffers used for the purpose of reassembly
and/or buffering of future messages.
However, the buffering of future epoch records were not reflected
in this field so far. This commit changes this, adding the length
of a future epoch record to `total_bytes_buffered` when it's buffered,
and subtracting it when it's freed.
This commit adds a static function ssl_buffer_make_space() which
takes a buffer size as an argument and attempts to free as many
future message bufffers as necessary to ensure that the desired
amount of buffering space is available without violating the
total buffering limit set by MBEDTLS_SSL_DTLS_MAX_BUFFERING.
If the next expected handshake message can't be reassembled because
buffered future messages have already used up too much of the available
space for buffering, free those future message buffers in order to
make space for the reassembly, starting with the handshake message
that's farthest in the future.
This commit adds a static function ssl_buffering_free_slot()
which allows to free a particular structure used to buffer
and/or reassembly some handshake message.
This commit introduces a compile time constant MBEDTLS_SSL_DTLS_MAX_BUFFERING
to mbedtls/config.h which allows the user to control the cumulative size of
all heap buffer allocated for the purpose of reassembling and buffering
handshake messages.
It is put to use by introducing a new field `total_bytes_buffered` to
the buffering substructure of `mbedtls_ssl_handshake_params` that keeps
track of the total size of heap allocated buffers for the purpose of
reassembly and buffering at any time. It is increased whenever a handshake
message is buffered or prepared for reassembly, and decreased when a
buffered or fully reassembled message is copied into the input buffer
and passed to the handshake logic layer.
This commit does not yet include future epoch record buffering into
account; this will be done in a subsequent commit.
Also, it is now conceivable that the reassembly of the next expected
handshake message fails because too much buffering space has already
been used up for future messages. This case currently leads to an
error, but instead, the stack should get rid of buffered messages
to be able to buffer the next one. This will need to be implemented
in one of the next commits.
A previous commit introduced the function ssl_prepare_reassembly_buffer()
which took a message length and a boolean flag indicating if a reassembly
bit map was needed, and attempted to heap-allocate a buffer of sufficient
size to hold both the message, its header, and potentially the reassembly
bitmap.
A subsequent commit is going to introduce a limit on the amount of heap
allocations allowed for the purpose of buffering, and this change will
need to know the reassembly buffer size before attempting the allocation.
To this end, this commit changes ssl_prepare_reassembly_buffer() into
ssl_get_reassembly_buffer_size() which solely computes the reassembly
buffer size, and performing the heap allocation manually in
ssl_buffer_message().
This commit moves the length and content check for CCS messages to
the function mbedtls_ssl_handle_message_type() which is called after
a record has been deprotected.
Previously, these checks were performed in the function
mbedtls_ssl_parse_change_cipher_spec(); however, now that
the arrival of out-of-order CCS messages is remembered
as a boolean flag, the check also has to happen when this
flag is set. Moving the length and content check to
mbedtls_ssl_handle_message_type() allows to treat both
checks uniformly.
Depends on the current transform, which might change when retransmitting a
flight containing a Finished message, so compute it only after the transform
is swapped.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
The SSL context is passed to the reassembly preparation function
ssl_prepare_reassembly_buffer() solely for the purpose of allowing
debugging output. This commit marks the context as unused if
debugging is disabled (through !MBEDTLS_DEBUG_C).
This commit implements the buffering of a record from the next epoch.
- The buffering substructure of mbedtls_ssl_handshake_params
gets another field to hold a raw record (incl. header) from
a future epoch.
- If ssl_parse_record_header() sees a record from the next epoch,
it signals that it might be suitable for buffering by returning
MBEDTLS_ERR_SSL_EARLY_MESSAGE.
- If ssl_get_next_record() finds this error code, it passes control
to ssl_buffer_future_record() which may or may not decide to buffer
the record; it does so if
- a handshake is in progress,
- the record is a handshake record
- no record has already been buffered.
If these conditions are met, the record is backed up in the
aforementioned buffering substructure.
- If the current datagram is fully processed, ssl_load_buffered_record()
is called to check if a record has been buffered, and if yes,
if by now the its epoch is the current one; if yes, it copies
the record into the (empty! otherwise, ssl_load_buffered_record()
wouldn't have been called) input buffer.
This commit implements future handshake message buffering
and loading by implementing ssl_load_buffered_message()
and ssl_buffer_message().
Whenever a handshake message is received which is
- a future handshake message (i.e., the sequence number
is larger than the next expected one), or which is
- a proper fragment of the next expected handshake message,
ssl_buffer_message() is called, which does the following:
- Ignore message if its sequence number is too far ahead
of the next expected sequence number, as controlled by
the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS.
- Otherwise, check if buffering for the message with the
respective sequence number has already commenced.
- If not, allocate space to back up the message within
the buffering substructure of mbedtls_ssl_handshake_params.
If the message is a proper fragment, allocate additional
space for a reassembly bitmap; if it is a full message,
omit the bitmap. In any case, fall throuh to the next case.
- If the message has already been buffered, check that
the header is the same, and add the current fragment
if the message is not yet complete (this excludes the
case where a future message has been received in a single
fragment, hence omitting the bitmap, and is afterwards
also received as a series of proper fragments; in this
case, the proper fragments will be ignored).
For loading buffered messages in ssl_load_buffered_message(),
the approach is the following:
- Check the first entry in the buffering window (the window
is always based at the next expected handshake message).
If buffering hasn't started or if reassembly is still
in progress, ignore. If the next expected message has been
fully received, copy it to the input buffer (which is empty,
as ssl_load_buffered_message() is only called in this case).
This commit returns the error code MBEDTLS_ERR_SSL_EARLY_MESSAGE
for proper handshake fragments, forwarding their treatment to
the buffering function ssl_buffer_message(); currently, though,
this function does not yet buffer or reassembly HS messages, so:
! This commit temporarily disables support for handshake reassembly !
This commit introduces helper functions
- ssl_get_hs_frag_len()
- ssl_get_hs_frag_off()
to parse the fragment length resp. fragment offset fields
in the handshake header.
Moreover, building on these helper functions, it adds a
function ssl_check_hs_header() checking the validity of
a DTLS handshake header with respect to the specification,
i.e. the indicated fragment must be a subrange of the total
handshake message, and the total handshake fragment length
(including header) must not exceed the record content size.
These checks were previously performed at a later stage during
ssl_reassemble_dtls_handshake().
This commit introduces a static helper function ssl_get_hs_total_len()
parsing the total message length field in the handshake header, and
puts it to use in mbedtls_ssl_prepare_handshake_record().
This commit introduces, but does not yet put to use, a sub-structure
of mbedtls_ssl_handshake_params::buffering that will be used for the
buffering and/or reassembly of handshake messages with handshake
sequence numbers that are greater or equal to the next expected
sequence number.
This commit introduces a sub-structure `buffering` within
mbedtls_ssl_handshake_params that shall contain all data
related to the reassembly and/or buffering of handshake
messages.
Currently, only buffering of CCS messages is implemented,
so the only member of this struct is the previously introduced
`seen_ccs` field.
This commit introduces a static function ssl_hs_is_proper_fragment()
to check if the current incoming handshake message is a proper fragment.
It is used within mbedtls_ssl_prepare_handshake_record() to decide whether
handshake reassembly through ssl_reassemble_dtls_handshake() is needed.
The commit changes the behavior of the library in the (unnatural)
situation where proper fragments for a handshake message are followed
by a non-fragmented version of the same message. In this case,
the previous code invoked the handshake reassembly routine
ssl_reassemble_dtls_handshake(), while with this commit, the full
handshake message is directly forwarded to the user, no altering
the handshake reassembly state -- in particular, not freeing it.
As a remedy, freeing of a potential handshake reassembly structure
is now done as part of the handshake update function
mbedtls_ssl_update_handshake_status().
This commit adds a parameter to ssl_prepare_reassembly_buffer()
allowing to disable the allocation of space for a reassembly bitmap.
This will allow this function to be used for the allocation of buffers
for future handshake messages in case these need no fragmentation.
This commit moves the code-path preparing the handshake
reassembly buffer, consisting of header, message content,
and reassembly bitmap, to a separate function
ssl_prepare_reassembly_buffer().
This leads future HS messages to traverse the buffering
function ssl_buffer_message(), which however doesn't do
anything at the moment for HS messages. Since the error
code MBEDTLS_ERR_SSL_EARLY_MESSAGE is afterwards remapped
to MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -- which is what
was returned prior to this commit when receiving a future
handshake message -- this commit therefore does not yet
introduce any change in observable behavior.
This commit implements support for remembering out-of-order
CCS messages. Specifically, a flag is set whenever a CCS message
is read which remains until the end of a flight, and when a
CCS message is expected and a CCS message has been seen in the
current flight, a synthesized CCS record is created.
This commit introduces a function ssl_record_is_in_progress()
to indicate if there is there is more data within the current
record to be processed. Further, it moves the corresponding
call from ssl_read_record_layer() to the parent function
mbedtls_ssl_read_record(). With this change, ssl_read_record_layer()
has the sole purpose of fetching and decoding a new record,
and hence this commit also renames it to ssl_get_next_record().
Subsequent commits will potentially inject buffered
messages after the last incoming message has been
consumed, but before a new one is fetched. As a
preparatory step to this, this commit moves the call
to ssl_consume_current_message() from ssl_read_record_layer()
to the calling function mbedtls_ssl_read_record().
The first part of the function ssl_read_record_layer() was
to mark the previous message as consumed. This commit moves
the corresponding code-path to a separate static function
ssl_consume_current_message().
This function was previously global because it was
used directly within ssl_parse_certificate_verify()
in library/ssl_srv.c. The previous commit removed
this dependency, replacing the call by a call to
the global parent function mbedtls_ssl_read_record().
This renders mbedtls_ssl_read_record_layer() internal
and therefore allows to make it static, and accordingly
rename it as ssl_read_record_layer().
Usually, debug messages beginning with "=> and "<="
match up and indicate entering of and returning from
functions, respectively. This commit fixes one exception
to this rule in mbedtls_ssl_read_record(), which sometimes
printed two messages of the form "<= XXX".
Previously, mbedtls_ssl_read_record() always updated the handshake
checksum in case a handshake record was received. While desirable
most of the time, for the CertificateVerify message the checksum
update must only happen after the message has been fully processed,
because the validation requires the handshake digest up to but
excluding the CertificateVerify itself. As a remedy, the bulk
of mbedtls_ssl_read_record() was previously duplicated within
ssl_parse_certificate_verify(), hardening maintenance in case
mbedtls_ssl_read_record() is subject to changes.
This commit adds a boolean parameter to mbedtls_ssl_read_record()
indicating whether the checksum should be updated in case of a
handshake message or not. This allows using it also for
ssl_parse_certificate_verify(), manually updating the checksum
after the message has been processed.
This for example lead to the following corner case bug:
The code attempted to piggy-back a Finished message at
the end of a datagram where precisely 12 bytes of payload
were still available. This lead to an empty Finished fragment
being sent, and when mbedtls_ssl_flight_transmit() was called
again, it believed that it was just starting to send the
Finished message, thereby calling ssl_swap_epochs() which
had already happened in the call sending the empty fragment.
Therefore, the second call would send the 'rest' of the
Finished message with wrong epoch.
This commit adds a public function
`mbedtls_ssl_conf_datagram_packing()`
that allows to allow / forbid the packing of multiple
records within a single datagram.
The `partial` argument is only used when DTLS and same port
client reconnect are enabled. This commit marks the variable
as unused if that's not the case.
If neither the maximum fragment length extension nor DTLS
are used, the SSL context argument is unnecessary as the
maximum payload length is hardcoded as MBEDTLS_SSL_MAX_CONTENT_LEN.
This commit finally enables datagram packing by modifying the
record preparation function ssl_write_record() to not always
calling mbedtls_ssl_flush_output().
The packing of multiple records within a single datagram works
by increasing the pointer `out_hdr` (pointing to the beginning
of the next outgoing record) within the datagram buffer, as
long as space is available and no flush was mandatory.
This commit does not yet change the code's behavior of always
flushing after preparing a record, but it introduces the logic
of increasing `out_hdr` after preparing the record, and resetting
it after the flush has been completed.
Previously, the record sequence number was incremented at the
end of each successful call to mbedtls_ssl_flush_output(),
which works as long as there is precisely one such call for
each outgoing record.
When packing multiple records into a single datagram, this
property is no longer true, and instead the increment of the
record sequence number must happen after the record has been
prepared, and not after it has been dispatched.
This commit moves the code for incrementing the record sequence
number from mbedtls_ssl_flush_output() to ssl_write_record().
This commit is another step towards supporting the packing of
multiple records within a single datagram.
Previously, the incremental outgoing record sequence number was
statically stored within the record buffer, at its final place
within the record header. This slightly increased efficiency
as it was not necessary to copy the sequence number when writing
outgoing records.
When allowing multiple records within a single datagram, it is
necessary to allow the position of the current record within the
datagram buffer to be flexible; in particular, there is no static
address for the record sequence number field within the record header.
This commit introduces an additional field `cur_out_ctr` within
the main SSL context structure `mbedtls_ssl_context` to keep track
of the outgoing record sequence number independent of the buffer used
for the current record / datagram. Whenever a new record is written,
this sequence number is copied to the the address `out_ctr` of the
sequence number header field within the current outgoing record.
The SSL/TLS module maintains a number of internally used pointers
`out_hdr`, `out_len`, `out_iv`, ..., indicating where to write the
various parts of the record header.
These pointers have to be kept in sync and sometimes need update:
Most notably, the `out_msg` pointer should always point to the
beginning of the record payload, and its offset from the pointer
`out_iv` pointing to the end of the record header is determined
by the length of the explicit IV used in the current record
protection mechanism.
This commit introduces functions deducing these pointers from
the pointers `out_hdr` / `in_hdr` to the beginning of the header
of the current outgoing / incoming record.
The flexibility gained by these functions will subsequently
be used to allow shifting of `out_hdr` for the purpose of
packing multiple records into a single datagram.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
Note: no interop tests in ssl-opt.sh for now, as some of them make us run into
bugs in (the CI's default versions of) OpenSSL and GnuTLS, so interop tests
will be added later once the situation is clarified. <- TODO
This will allow fragmentation to always happen in the same place, always from
a buffer distinct from ssl->out_msg, and with the same way of resuming after
returning WANT_WRITE
- take advantage of the fact that we're only called for first send
- put all sanity checks at the top
- rename and constify shortcut variables
- improve comments
`mbedtls_ssl_get_record_expansion()` is supposed to return the maximum
difference between the size of a protected record and the size of the
encapsulated plaintext.
It had the following two bugs:
(1) It did not consider the new ChaChaPoly ciphersuites, returning
the error code #MBEDTLS_ERR_SSL_INTERNAL_ERROR in this case.
(2) It did not correctly estimate the maximum record expansion in case
of CBC ciphersuites in (D)TLS versions 1.1 and higher, in which
case the ciphertext is prefixed by an explicit IV.
This commit fixes both bugs.
The length to the debug message could conceivably leak through the time it
takes to print it, and that length would in turn reveal whether padding was
correct or not.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function, and the location where we read the MAC, give information
about that.
A local attacker could gain information about that by observing via a
cache attack whether the bytes at the end of the record (at the location of
would-be padding) have been read during MAC verification (computation +
comparison).
Let's make sure they're always read.
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
For the situation where the mbedTLS device has limited RAM, but the
other end of the connection doesn't support the max_fragment_length
extension. To be spec-compliant, mbedTLS has to keep a 16384 byte
incoming buffer. However the outgoing buffer can be made smaller without
breaking spec compliance, and we save some RAM.
See comments in include/mbedtls/config.h for some more details.
(The lower limit of outgoing buffer size is the buffer size used during
handshake/cert negotiation. As the handshake is half-duplex it might
even be possible to store this data in the "incoming" buffer during the
handshake, which would save even more RAM - but it would also be a lot
hackier and error-prone. I didn't really explore this possibility, but
thought I'd mention it here in case someone sees this later on a mission
to jam mbedTLS into an even tinier RAM footprint.)
It's undesirable to have users of the SSL layer check for an error code
specific to a lower-level layer, both out of general layering principles, and
also because if we later make another crypto module gain resume capabilities,
we would need to change the contract again (checking for a new module-specific
error code).
Summary of merge conflicts:
include/mbedtls/ecdh.h -> documentation style
include/mbedtls/ecdsa.h -> documentation style
include/mbedtls/ecp.h -> alt style, new error codes, documentation style
include/mbedtls/error.h -> new error codes
library/error.c -> new error codes (generated anyway)
library/ecp.c:
- code of an extracted function was changed
library/ssl_cli.c:
- code addition on one side near code change on the other side
(ciphersuite validation)
library/x509_crt.c -> various things
- top fo file: helper structure added near old zeroize removed
- documentation of find_parent_in()'s signature: improved on one side,
added arguments on the other side
- documentation of find_parent()'s signature: same as above
- verify_chain(): variables initialised later to give compiler an
opportunity to warn us if not initialised on a code path
- find_parent(): funcion structure completely changed, for some reason git
tried to insert a paragraph of the old structure...
- merge_flags_with_cb(): data structure changed, one line was fixed with a
cast to keep MSVC happy, this cast is already in the new version
- in verify_restratable(): adjacent independent changes (function
signature on one line, variable type on the next)
programs/ssl/ssl_client2.c:
- testing for IN_PROGRESS return code near idle() (event-driven):
don't wait for data in the the socket if ECP_IN_PROGRESS
tests/data_files/Makefile: adjacent independent additions
tests/suites/test_suite_ecdsa.data: adjacent independent additions
tests/suites/test_suite_x509parse.data: adjacent independent additions
* development: (1059 commits)
Change symlink to hardlink to avoid permission issues
Fix out-of-tree testing symlinks on Windows
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
...
As a protection against the Lucky Thirteen attack, the TLS code for
CBC decryption in encrypt-then-MAC mode performs extra MAC
calculations to compensate for variations in message size due to
padding. The amount of extra MAC calculation to perform was based on
the assumption that the bulk of the time is spent in processing
64-byte blocks, which is correct for most supported hashes but not for
SHA-384. Correct the amount of extra work for SHA-384 (and SHA-512
which is currently not used in TLS, and MD2 although no one should
care about that).
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
Rename to mbedtls_ssl_get_async_operation_data and
mbedtls_ssl_set_async_operation_data so that they're about
"async operation data" and not about some not-obvious "data".
When a handshake step starts an asynchronous operation, the
application needs to know which SSL connection the operation is for,
so that when the operation completes, the application can wake that
connection up. Therefore the async start callbacks need to take the
SSL context as an argument. It isn't enough to let them set a cookie
in the SSL connection, the application needs to be able to find the
right SSL connection later.
Also pass the SSL context to the other callbacks for consistency. Add
a new field to the handshake that the application can use to store a
per-connection context. This new field replaces the former
context (operation_ctx) that was created by the start function and
passed to the resume function.
Add a boolean flag to the handshake structure to track whether an
asynchronous operation is in progress. This is more robust than
relying on the application to set a non-null application context.
Change the signature of mbedtls_ssl_handshake_free again. Now take the
whole SSL context as argument and not just the configuration and the
handshake substructure.
This is in preparation for changing the asynchronous cancel callback
to take the SSL context as an argument.
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
In mbedtls_ssl_get_key_exchange_md_tls1_2, add an output parameter for
the hash length. The code that calls this function can currently do
without it, but it will need the hash length in the future, when
adding support for a third-party callback to calculate the signature
of the hash.
New compile-time option MBEDTLS_SSL_ASYNC_PRIVATE_C, enabling
callbacks to replace private key operations. These callbacks allow the
SSL stack to make an asynchronous call to an external cryptographic
module instead of calling the cryptography layer inside the library.
The call is asynchronous in that it may return the new status code
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, in which case the SSL stack returns
and can be later called where it left off.
This commit introduces the configuration option. Later commits will
implement the feature proper.
This function is declared in ssl_internal.h, so this is not a public
API change.
This is in preparation for mbedtls_ssl_handshake_free needing to call
methods from the config structure.
This commit removes all the static occurrencies of the function
mbedtls_zeroize() in each of the individual .c modules. Instead the
function has been moved to utils.h that is included in each of the
modules.
In mbedtls_ssl_derive_keys, don't call mbedtls_md_hmac_starts in
ciphersuites that don't use HMAC. This doesn't change the behavior of
the code, but avoids relying on an uncaught error when attempting to
start an HMAC operation that hadn't been initialized.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
A previous commit changed the record encryption function
`ssl_encrypt_buf` to compute the MAC in a temporary buffer
and copying the relevant part of it (which is strictly smaller
if the truncated HMAC extension is used) to the outgoing message
buffer. However, the change was only made in case Encrypt-Then-MAC
was enabled, but not in case of MAC-Then-Encrypt. While this
doesn't constitute a problem, for the sake of uniformity this
commit changes `ssl_encrypt_buf` to compute the MAC in a temporary
buffer in this case, too.
* restricted/pr/403:
Correct record header size in case of TLS
Don't allocate space for DTLS header if DTLS is disabled
Improve debugging output
Adapt ChangeLog
Add run-time check for handshake message size in ssl_write_record
Add run-time check for record content size in ssl_encrypt_buf
Add compile-time checks for size of record content and payload
In a previous PR (Fix heap corruption in implementation of truncated HMAC
extension #425) the place where MAC is computed was changed from the end of
the SSL I/O buffer to a local buffer (then (part of) the content of the local
buffer is either copied to the output buffer of compare to the input buffer).
Unfortunately, this change was made only for TLS 1.0 and later, leaving SSL
3.0 in an inconsistent state due to ssl_mac() still writing to the old,
hard-coded location, which, for MAC verification, resulted in later comparing
the end of the input buffer (containing the computed MAC) to the local buffer
(uninitialised), most likely resulting in MAC verification failure, hence no
interop (even with ourselves).
This commit completes the move to using a local buffer by using this strategy
for SSL 3.0 too. Fortunately ssl_mac() was static so it's not a problem to
change its signature.
In case truncated HMAC must be used but the Mbed TLS peer hasn't been updated
yet, one can use the compile-time option MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT to
temporarily fall back to the old, non-compliant implementation of the truncated
HMAC extension.
The truncated HMAC extension as described in
https://tools.ietf.org/html/rfc6066.html#section-7 specifies that when truncated
HMAC is used, only the HMAC output should be truncated, while the HMAC key
generation stays unmodified. This commit fixes Mbed TLS's behavior of also
truncating the key, potentially leading to compatibility issues with peers
running other stacks than Mbed TLS.
Details:
The keys for the MAC are pieces of the keyblock that's generated from the
master secret in `mbedtls_ssl_derive_keys` through the PRF, their size being
specified as the size of the digest used for the MAC, regardless of whether
truncated HMAC is enabled or not.
/----- MD size ------\ /------- MD size ----\
Keyblock +----------------------+----------------------+------------------+---
now | MAC enc key | MAC dec key | Enc key | ...
(correct) +----------------------+----------------------+------------------+---
In the previous code, when truncated HMAC was enabled, the HMAC keys
were truncated to 10 bytes:
/-10 bytes-\ /-10 bytes-\
Keyblock +-------------+-------------+------------------+---
previously | MAC enc key | MAC dec key | Enc key | ...
(wrong) +-------------+-------------+------------------+---
The reason for this was that a single variable `transform->maclen` was used for
both the keysize and the size of the final MAC, and its value was reduced from
the MD size to 10 bytes in case truncated HMAC was negotiated.
This commit fixes this by introducing a temporary variable `mac_key_len` which
permanently holds the MD size irrespective of the presence of truncated HMAC,
and using this temporary to obtain the MAC key chunks from the keyblock.
Previously, MAC validation for an incoming record proceeded as follows:
1) Make a copy of the MAC contained in the record;
2) Compute the expected MAC in place, overwriting the presented one;
3) Compare both.
This resulted in a record buffer overflow if truncated MAC was used, as in this
case the record buffer only reserved 10 bytes for the MAC, but the MAC
computation routine in 2) always wrote a full digest.
For specially crafted records, this could be used to perform a controlled write of
up to 6 bytes past the boundary of the heap buffer holding the record, thereby
corrupting the heap structures and potentially leading to a crash or remote code
execution.
This commit fixes this by making the following change:
1) Compute the expected MAC in a temporary buffer that has the size of the
underlying message digest.
2) Compare to this to the MAC contained in the record, potentially
restricting to the first 10 bytes if truncated HMAC is used.
A similar fix is applied to the encryption routine `ssl_encrypt_buf`.
* development: (30 commits)
update README file (#1144)
Fix typo in asn1.h
Improve leap year test names in x509parse.data
Correctly handle leap year in x509_date_is_valid()
Renegotiation: Add tests for SigAlg ext parsing
Parse Signature Algorithm ext when renegotiating
Minor style fix
config.pl get: be better behaved
config.pl get: don't rewrite config.h; detect write errors
Fixed "config.pl get" for options with no value
Fix typo and bracketing in macro args
Ensure failed test_suite output is sent to stdout
Remove use of GNU sed features from ssl-opt.sh
Fix typos in ssl-opt.sh comments
Add ssl-opt.sh test to check gmt_unix_time is good
Extend ssl-opt.h so that run_test takes function
Always print gmt_unix_time in TLS client
Restored note about using minimum functionality in makefiles
Note in README that GNU make is required
Fix changelog for ssl_server2.c usage fix
...
Previously, if `MBEDTLS_SSL_RENEGOTIATION` was disabled, incoming handshake
messages in `mbedtls_ssl_read` (expecting application data) lead to the
connection being closed. This commit fixes this, restricting the
`MBEDTLS_SSL_RENEGOTIATION`-guard to the code-paths responsible for accepting
renegotiation requests and aborting renegotiation attempts after too many
unexpected records have been received.
This commit reconciles the code path responsible for resending the
final DTLS handshake flight with the path for handling resending of
the other flights.
DTLS records from previous epochs were incorrectly checked against the
current epoch transform's minimal content length, leading to the
rejection of entire datagrams. This commit fixed that and adapts two
test cases accordingly.
Internal reference: IOTSSL-1417
- Enhances the documentation of mbedtls_ssl_get_bytes_avail (return
the number of bytes left in the current application data record, if
there is any).
- Introduces a new public function mbedtls_ssl_check_pending for
checking whether any data in the internal buffers still needs to be
processed. This is necessary for users implementing event-driven IO
to decide when they can safely idle until they receive further
events from the underlying transport.
Give a note on the debugging output on the following occasions:
(1) The timer expires in mbedtls_ssl_fetch_input
(2) There's more than one records within a single datagram
