/** * \file psa/crypto_accel_driver.h * \brief PSA cryptography accelerator driver module * * This header declares types and function signatures for cryptography * drivers that access key material directly. This is meant for * on-chip cryptography accelerators. * * This file is part of the PSA Crypto Driver Model, containing functions for * driver developers to implement to enable hardware to be called in a * standardized way by a PSA Cryptographic API implementation. The functions * comprising the driver model, which driver authors implement, are not * intended to be called by application developers. */ /* * Copyright (C) 2018, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef PSA_CRYPTO_ACCEL_DRIVER_H #define PSA_CRYPTO_ACCEL_DRIVER_H #include "crypto_driver_common.h" #ifdef __cplusplus extern "C" { #endif /** \defgroup driver_digest Hardware-Accelerated Message Digests * * Generation and authentication of Message Digests (aka hashes) must be done * in parts using the following sequence: * - `psa_drv_hash_setup_t` * - `psa_drv_hash_update_t` * - `psa_drv_hash_update_t` * - ... * - `psa_drv_hash_finish_t` * * If a previously started Message Digest operation needs to be terminated * before the `psa_drv_hash_finish_t` operation is complete, it should be aborted * by the `psa_drv_hash_abort_t`. Failure to do so may result in allocated * resources not being freed or in other undefined behavior. */ /**@{*/ /** \brief The hardware-specific hash context structure * * The contents of this structure are implementation dependent and are * therefore not described here */ typedef struct psa_drv_hash_context_s psa_drv_hash_context_t; /** \brief The function prototype for the start operation of a hash (message * digest) operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_hash__setup * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying hash function * * \param[in,out] p_context A structure that will contain the * hardware-specific hash context * * \retval PSA_SUCCESS Success. */ typedef psa_status_t (*psa_drv_hash_setup_t)(psa_drv_hash_context_t *p_context); /** \brief The function prototype for the update operation of a hash (message * digest) operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_hash__update * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm * * \param[in,out] p_context A hardware-specific structure for the * previously-established hash operation to be * continued * \param[in] p_input A buffer containing the message to be appended * to the hash operation * \param[in] input_length The size in bytes of the input message buffer */ typedef psa_status_t (*psa_drv_hash_update_t)(psa_drv_hash_context_t *p_context, const uint8_t *p_input, size_t input_length); /** \brief The function prototype for the finish operation of a hash (message * digest) operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_hash__finish * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm * * \param[in,out] p_context A hardware-specific structure for the * previously started hash operation to be * fiinished * \param[out] p_output A buffer where the generated digest will be * placed * \param[in] output_size The size in bytes of the buffer that has been * allocated for the `p_output` buffer * \param[out] p_output_length The number of bytes placed in `p_output` after * success * * \retval PSA_SUCCESS * Success. */ typedef psa_status_t (*psa_drv_hash_finish_t)(psa_drv_hash_context_t *p_context, uint8_t *p_output, size_t output_size, size_t *p_output_length); /** \brief The function prototype for the abort operation of a hash (message * digest) operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_hash__abort * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm * * \param[in,out] p_context A hardware-specific structure for the previously * started hash operation to be aborted */ typedef void (*psa_drv_hash_abort_t)(psa_drv_hash_context_t *p_context); /**@}*/ /** \defgroup accel_mac Hardware-Accelerated Message Authentication Code * Generation and authentication of Message Authentication Codes (MACs) using * cryptographic accelerators can be done either as a single function call (via the * `psa_drv_accel_mac_generate_t` or `psa_drv_accel_mac_verify_t` * functions), or in parts using the following sequence: * - `psa_drv_accel_mac_setup_t` * - `psa_drv_accel_mac_update_t` * - `psa_drv_accel_mac_update_t` * - ... * - `psa_drv_accel_mac_finish_t` or `psa_drv_accel_mac_finish_verify_t` * * If a previously started MAC operation needs to be terminated, it * should be done so by the `psa_drv_accel_mac_abort_t`. Failure to do so may * result in allocated resources not being freed or in other undefined * behavior. * */ /**@{*/ /** \brief The hardware-accelerator-specific MAC context structure * * The contents of this structure are implementation dependent and are * therefore not described here. */ typedef struct psa_drv_accel_mac_context_s psa_drv_accel_mac_context_t; /** \brief The function prototype for the setup operation of a * hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___setup * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying primitive, and `MAC_VARIANT` * is the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in,out] p_context A structure that will contain the * hardware-specific MAC context * \param[in] p_key A buffer containing the cleartext key material * to be used in the operation * \param[in] key_length The size in bytes of the key material * * \retval PSA_SUCCESS * Success. */ typedef psa_status_t (*psa_drv_accel_mac_setup_t)(psa_drv_accel_mac_context_t *p_context, const uint8_t *p_key, size_t key_length); /** \brief The function prototype for the update operation of a * hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___update * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` * is the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in,out] p_context A hardware-specific structure for the * previously-established MAC operation to be * continued * \param[in] p_input A buffer containing the message to be appended * to the MAC operation * \param[in] input_length The size in bytes of the input message buffer */ typedef psa_status_t (*psa_drv_accel_mac_update_t)(psa_drv_accel_mac_context_t *p_context, const uint8_t *p_input, size_t input_length); /** \brief The function prototype for the finish operation of a * hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___finish * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is * the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in,out] p_context A hardware-specific structure for the * previously started MAC operation to be * finished * \param[out] p_mac A buffer where the generated MAC will be placed * \param[in] mac_length The size in bytes of the buffer that has been * allocated for the `p_mac` buffer * * \retval PSA_SUCCESS * Success. */ typedef psa_status_t (*psa_drv_accel_mac_finish_t)(psa_drv_accel_mac_context_t *p_context, uint8_t *p_mac, size_t mac_length); /** \brief The function prototype for the finish and verify operation of a * hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___finish_verify * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is * the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in,out] p_context A hardware-specific structure for the * previously started MAC operation to be * verified and finished * \param[in] p_mac A buffer containing the MAC that will be used * for verification * \param[in] mac_length The size in bytes of the data in the `p_mac` * buffer * * \retval PSA_SUCCESS * The operation completed successfully and the comparison matched */ typedef psa_status_t (*psa_drv_accel_mac_finish_verify_t)(psa_drv_accel_mac_context_t *p_context, const uint8_t *p_mac, size_t mac_length); /** \brief The function prototype for the abort operation for a previously * started hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___abort * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is * the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in,out] p_context A hardware-specific structure for the * previously started MAC operation to be * aborted * */ typedef psa_status_t (*psa_drv_accel_mac_abort_t)(psa_drv_accel_mac_context_t *p_context); /** \brief The function prototype for the one-shot operation of a * hardware-accelerated MAC operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac__ * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is * the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in] p_input A buffer containing the data to be MACed * \param[in] input_length The length in bytes of the `p_input` data * \param[in] p_key A buffer containing the key material to be used * for the MAC operation * \param[in] key_length The length in bytes of the `p_key` data * \param[in] alg The algorithm to be performed * \param[out] p_mac The buffer where the resulting MAC will be placed * upon success * \param[in] mac_length The length in bytes of the `p_mac` buffer */ typedef psa_status_t (*psa_drv_accel_mac_t)(const uint8_t *p_input, size_t input_length, const uint8_t *p_key, size_t key_length, psa_algorithm_t alg, uint8_t *p_mac, size_t mac_length); /** \brief The function prototype for the one-shot hardware-accelerated MAC * Verify operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_mac___verify * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is * the specific variant of a MAC operation (such as HMAC or CMAC) * * \param[in] p_input A buffer containing the data to be MACed * \param[in] input_length The length in bytes of the `p_input` data * \param[in] p_key A buffer containing the key material to be used * for the MAC operation * \param[in] key_length The length in bytes of the `p_key` data * \param[in] alg The algorithm to be performed * \param[in] p_mac The MAC data to be compared * \param[in] mac_length The length in bytes of the `p_mac` buffer * * \retval PSA_SUCCESS * The operation completed successfully and the comparison matched */ typedef psa_status_t (*psa_drv_accel_mac_verify_t)(const uint8_t *p_input, size_t input_length, const uint8_t *p_key, size_t key_length, psa_algorithm_t alg, const uint8_t *p_mac, size_t mac_length); /**@}*/ /** \defgroup accel_cipher Hardware-Accelerated Block Ciphers * Encryption and Decryption using hardware-acceleration in block modes other * than ECB must be done in multiple parts, using the following flow: * - `psa_drv_accel_ciphersetup_t` * - `psa_drv_accel_cipher_set_iv_t` (optional depending upon block mode) * - `psa_drv_accel_cipher_update_t` * - `psa_drv_accel_cipher_update_t` * - ... * - `psa_drv_accel_cipher_finish_t` * If a previously started hardware-accelerated Cipher operation needs to be * terminated, it should be done so by the `psa_drv_accel_cipher_abort_t`. * Failure to do so may result in allocated resources not being freed or in * other undefined behavior. */ /**@{*/ /** \brief The hardware-accelerator-specific cipher context structure * * The contents of this structure are implementation dependent and are * therefore not described here. */ typedef struct psa_drv_accel_cipher_context_s psa_drv_accel_cipher_context_t; /** \brief The function prototype for the setup operation of * hardware-accelerated block cipher operations. * Functions that implement this prototype should be named in the following * conventions: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_setup__ * ~~~~~~~~~~~~~ * Where * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES) * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR) * * For stream ciphers: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_setup_ * ~~~~~~~~~~~~~ * Where `CIPHER_NAME` is the name of a stream cipher (i.e. RC4) * * \param[in,out] p_context A structure that will contain the * hardware-specific cipher context * \param[in] direction Indicates if the operation is an encrypt or a * decrypt * \param[in] p_key_data A buffer containing the cleartext key material * to be used in the operation * \param[in] key_data_size The size in bytes of the key material * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_cipher_setup_t)(psa_drv_accel_cipher_context_t *p_context, psa_encrypt_or_decrypt_t direction, const uint8_t *p_key_data, size_t key_data_size); /** \brief The function prototype for the set initialization vector operation * of hardware-accelerated block cipher operations * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_set_iv__ * ~~~~~~~~~~~~~ * Where * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES) * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR) * * \param[in,out] p_context A structure that contains the previously setup * hardware-specific cipher context * \param[in] p_iv A buffer containing the initialization vecotr * \param[in] iv_length The size in bytes of the contents of `p_iv` * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_cipher_set_iv_t)(psa_drv_accel_cipher_context_t *p_context, const uint8_t *p_iv, size_t iv_length); /** \brief The function prototype for the update operation of * hardware-accelerated block cipher operations. * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_update__ * ~~~~~~~~~~~~~ * Where * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES) * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR) * * \param[in,out] p_context A hardware-specific structure for the * previously started cipher operation * \param[in] p_input A buffer containing the data to be * encrypted or decrypted * \param[in] input_size The size in bytes of the `p_input` buffer * \param[out] p_output A caller-allocated buffer where the * generated output will be placed * \param[in] output_size The size in bytes of the `p_output` buffer * \param[out] p_output_length After completion, will contain the number * of bytes placed in the `p_output` buffer * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_cipher_update_t)(psa_drv_accel_cipher_context_t *p_context, const uint8_t *p_input, size_t input_size, uint8_t *p_output, size_t output_size, size_t *p_output_length); /** \brief The function prototype for the finish operation of * hardware-accelerated block cipher operations. * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_finish__ * ~~~~~~~~~~~~~ * Where * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES) * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR) * * \param[in,out] p_context A hardware-specific structure for the * previously started cipher operation * \param[out] p_output A caller-allocated buffer where the generated * output will be placed * \param[in] output_size The size in bytes of the `p_output` buffer * \param[out] p_output_length After completion, will contain the number of * bytes placed in the `p_output` buffer * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_cipher_finish_t)(psa_drv_accel_cipher_context_t *p_context, uint8_t *p_output, size_t output_size, size_t *p_output_length); /** \brief The function prototype for the abort operation of * hardware-accelerated block cipher operations. * * Functions that implement the following prototype should be named in the * following convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_cipher_abort__ * ~~~~~~~~~~~~~ * Where * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES) * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR) * * \param[in,out] p_context A hardware-specific structure for the * previously started cipher operation * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_cipher_abort_t)(psa_drv_accel_cipher_context_t *p_context); /**@}*/ /** \defgroup accel_aead Hardware-Accelerated Authenticated Encryption with Additional Data * * Hardware-accelerated Authenticated Encryption with Additional Data (AEAD) * operations must be done in one function call. While this creates a burden * for implementers as there must be sufficient space in memory for the entire * message, it prevents decrypted data from being made available before the * authentication operation is complete and the data is known to be authentic. */ /**@{*/ /** \brief The function prototype for the hardware-accelerated authenticated * encryption operation. * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_aead__encrypt * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the AEAD algorithm * * \param[in] p_key A pointer to the key material * \param[in] key_length The size in bytes of the key material * \param[in] alg The AEAD algorithm to compute * (\c PSA_ALG_XXX value such that * #PSA_ALG_IS_AEAD(`alg`) is true) * \param[in] nonce Nonce or IV to use * \param[in] nonce_length Size of the `nonce` buffer in bytes * \param[in] additional_data Additional data that will be MACed * but not encrypted. * \param[in] additional_data_length Size of `additional_data` in bytes * \param[in] plaintext Data that will be MACed and * encrypted. * \param[in] plaintext_length Size of `plaintext` in bytes * \param[out] ciphertext Output buffer for the authenticated and * encrypted data. The additional data is * not part of this output. For algorithms * where the encrypted data and the * authentication tag are defined as * separate outputs, the authentication * tag is appended to the encrypted data. * \param[in] ciphertext_size Size of the `ciphertext` buffer in * bytes * This must be at least * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(`alg`, * `plaintext_length`). * \param[out] ciphertext_length On success, the size of the output in * the `ciphertext` buffer * * \retval #PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_aead_encrypt_t)(const uint8_t *p_key, size_t key_length, psa_algorithm_t alg, const uint8_t *nonce, size_t nonce_length, const uint8_t *additional_data, size_t additional_data_length, const uint8_t *plaintext, size_t plaintext_length, uint8_t *ciphertext, size_t ciphertext_size, size_t *ciphertext_length); /** \brief The function prototype for the hardware-accelerated authenticated * decryption operation. * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_aead__decrypt * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the AEAD algorithm * \param[in] p_key A pointer to the key material * \param[in] key_length The size in bytes of the key material * \param[in] alg The AEAD algorithm to compute * (\c PSA_ALG_XXX value such that * #PSA_ALG_IS_AEAD(`alg`) is true) * \param[in] nonce Nonce or IV to use * \param[in] nonce_length Size of the `nonce` buffer in bytes * \param[in] additional_data Additional data that has been MACed * but not encrypted * \param[in] additional_data_length Size of `additional_data` in bytes * \param[in] ciphertext Data that has been MACed and * encrypted * For algorithms where the encrypted data * and the authentication tag are defined * as separate inputs, the buffer must * contain the encrypted data followed by * the authentication tag. * \param[in] ciphertext_length Size of `ciphertext` in bytes * \param[out] plaintext Output buffer for the decrypted data * \param[in] plaintext_size Size of the `plaintext` buffer in * bytes * This must be at least * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(`alg`, * `ciphertext_length`). * \param[out] plaintext_length On success, the size of the output * in the \b plaintext buffer * * \retval #PSA_SUCCESS * Success. */ typedef psa_status_t (*psa_drv_accel_aead_decrypt_t)(const uint8_t *p_key, size_t key_length, psa_algorithm_t alg, const uint8_t *nonce, size_t nonce_length, const uint8_t *additional_data, size_t additional_data_length, const uint8_t *ciphertext, size_t ciphertext_length, uint8_t *plaintext, size_t plaintext_size, size_t *plaintext_length); /**@}*/ /** \defgroup accel_asymmetric Hardware-Accelerated Asymmetric Cryptography * * Since the amount of data that can (or should) be encrypted or signed using * asymmetric keys is limited by the key size, hardware-accelerated asymmetric * key operations must be done in single function calls. */ /**@{*/ /** * \brief The function prototype for the hardware-accelerated asymmetric sign * operation. * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_asymmetric__sign * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the signing algorithm * * This function supports any asymmetric-key output from psa_export_key() as * the buffer in \ref p_key. Refer to the documentation of \ref * psa_export_key() for the formats. * * \param[in] p_key A buffer containing the private key * material * \param[in] key_size The size in bytes of the `p_key` data * \param[in] alg A signature algorithm that is compatible * with the type of `p_key` * \param[in] p_hash The hash or message to sign * \param[in] hash_length Size of the `p_hash` buffer in bytes * \param[out] p_signature Buffer where the signature is to be written * \param[in] signature_size Size of the `p_signature` buffer in bytes * \param[out] p_signature_length On success, the number of bytes * that make up the returned signature value * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_asymmetric_sign_t)(const uint8_t *p_key, size_t key_size, psa_algorithm_t alg, psa_key_type_t key_type, const uint8_t *p_hash, size_t hash_length, uint8_t *p_signature, size_t signature_size, size_t *p_signature_length); /** * \brief The function prototype for the hardware-accelerated signature verify * operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_asymmetric__verify * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the signing algorithm * * This function supports any output from \ref psa_export_public_key() as the * buffer in \ref p_key. Refer to the documentation of \ref * psa_export_public_key() for the format of public keys and to the * documentation of \ref psa_export_key() for the format for other key types. * * \param[in] p_key A buffer containing the public key material * \param[in] key_size The size in bytes of the `p_key` data * \param[in] alg A signature algorithm that is compatible with * the type of `key` * \param[in] p_hash The hash or message whose signature is to be * verified * \param[in] hash_length Size of the `p_hash` buffer in bytes * \param[in] p_signature Buffer containing the signature to verify * \param[in] signature_length Size of the `p_signature` buffer in bytes * * \retval PSA_SUCCESS * The signature is valid. */ typedef psa_status_t (*psa_drv_accel_asymmetric_verify_t)(const uint8_t *p_key, size_t key_size, psa_algorithm_t alg, psa_key_type_t key_type, const uint8_t *p_hash, size_t hash_length, const uint8_t *p_signature, size_t signature_length); /** * \brief The function prototype for the hardware-accelerated asymmetric * encrypt operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_asymmetric__encrypt * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the encryption algorithm * * This function supports any output from \ref psa_export_public_key() as the * buffer in \ref p_key. Refer to the documentation of \ref * psa_export_public_key() for the format of public keys and to the * documentation of \ref psa_export_key() for the format for other key types. * * \param[in] p_key A buffer containing the public key material * \param[in] key_size The size in bytes of the `p_key` data * \param[in] alg An asymmetric encryption algorithm that is * compatible with the type of `key` * \param[in] p_input The message to encrypt * \param[in] input_length Size of the `p_input` buffer in bytes * \param[in] p_salt A salt or label, if supported by the * encryption algorithm * If the algorithm does not support a * salt, pass `NULL` * If the algorithm supports an optional * salt and you do not want to pass a salt, * pass `NULL`. * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is * supported. * \param[in] salt_length Size of the `p_salt` buffer in bytes * If `p_salt` is `NULL`, pass 0. * \param[out] p_output Buffer where the encrypted message is to * be written * \param[in] output_size Size of the `p_output` buffer in bytes * \param[out] p_output_length On success, the number of bytes * that make up the returned output * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_asymmetric_encrypt_t)(const uint8_t *p_key, size_t key_size, psa_algorithm_t alg, psa_key_type_t key_type, const uint8_t *p_input, size_t input_length, const uint8_t *p_salt, size_t salt_length, uint8_t *p_output, size_t output_size, size_t *p_output_length); /** * \brief The function prototype for the hardware=acce;erated asymmetric * decrypt operation * * Functions that implement this prototype should be named in the following * convention: * ~~~~~~~~~~~~~{.c} * psa_drv_accel_asymmetric__decrypt * ~~~~~~~~~~~~~ * Where `ALGO` is the name of the encryption algorithm * * This function supports any asymmetric-key output from psa_export_key() as * the buffer in \ref p_key. Refer to the documentation of \ref * psa_export_key() for the formats. * * \param[in] p_key A buffer containing the private key material * \param[in] key_size The size in bytes of the `p_key` data * \param[in] alg An asymmetric encryption algorithm that is * compatible with the type of `key` * \param[in] p_input The message to decrypt * \param[in] input_length Size of the `p_input` buffer in bytes * \param[in] p_salt A salt or label, if supported by the * encryption algorithm * If the algorithm does not support a * salt, pass `NULL`. * If the algorithm supports an optional * salt and you do not want to pass a salt, * pass `NULL`. * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is * supported * \param[in] salt_length Size of the `p_salt` buffer in bytes * If `p_salt` is `NULL`, pass 0 * \param[out] p_output Buffer where the decrypted message is to * be written * \param[in] output_size Size of the `p_output` buffer in bytes * \param[out] p_output_length On success, the number of bytes * that make up the returned output * * \retval PSA_SUCCESS */ typedef psa_status_t (*psa_drv_accel_asymmetric_decrypt_t)(const uint8_t *p_key, size_t key_size, psa_algorithm_t alg, psa_key_type_t key_type, const uint8_t *p_input, size_t input_length, const uint8_t *p_salt, size_t salt_length, uint8_t *p_output, size_t output_size, size_t *p_output_length); /**@}*/ #ifdef __cplusplus } #endif #endif /* PSA_CRYPTO_ACCEL_DRIVER_H */