#! /usr/bin/env bash # all.sh # # Copyright The Mbed TLS Contributors # SPDX-License-Identifier: Apache-2.0 # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. ################################################################ #### Documentation ################################################################ # Purpose # ------- # # To run all tests possible or available on the platform. # # Notes for users # --------------- # # Warning: the test is destructive. It includes various build modes and # configurations, and can and will arbitrarily change the current CMake # configuration. The following files must be committed into git: # * include/mbedtls/config.h # * Makefile, library/Makefile, programs/Makefile, tests/Makefile, # programs/fuzz/Makefile # After running this script, the CMake cache will be lost and CMake # will no longer be initialised. # # The script assumes the presence of a number of tools: # * Basic Unix tools (Windows users note: a Unix-style find must be before # the Windows find in the PATH) # * Perl # * GNU Make # * CMake # * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind) # * G++ # * arm-gcc and mingw-gcc # * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc # * OpenSSL and GnuTLS command line tools, recent enough for the # interoperability tests. If they don't support SSLv3 then a legacy # version of these tools must be present as well (search for LEGACY # below). # See the invocation of check_tools below for details. # # This script must be invoked from the toplevel directory of a git # working copy of Mbed TLS. # # The behavior on an error depends on whether --keep-going (alias -k) # is in effect. # * Without --keep-going: the script stops on the first error without # cleaning up. This lets you work in the configuration of the failing # component. # * With --keep-going: the script runs all requested components and # reports failures at the end. In particular the script always cleans # up on exit. # # Note that the output is not saved. You may want to run # script -c tests/scripts/all.sh # or # tests/scripts/all.sh >all.log 2>&1 # # Notes for maintainers # --------------------- # # The bulk of the code is organized into functions that follow one of the # following naming conventions: # * pre_XXX: things to do before running the tests, in order. # * component_XXX: independent components. They can be run in any order. # * component_check_XXX: quick tests that aren't worth parallelizing. # * component_build_XXX: build things but don't run them. # * component_test_XXX: build and test. # * support_XXX: if support_XXX exists and returns false then # component_XXX is not run by default. # * post_XXX: things to do after running the tests. # * other: miscellaneous support functions. # # Each component must start by invoking `msg` with a short informative message. # # Warning: due to the way bash detects errors, the failure of a command # inside 'if' or '!' is not detected. Use the 'not' function instead of '!'. # # Each component is executed in a separate shell process. The component # fails if any command in it returns a non-zero status. # # The framework performs some cleanup tasks after each component. This # means that components can assume that the working directory is in a # cleaned-up state, and don't need to perform the cleanup themselves. # * Run `make clean`. # * Restore `include/mbedtks/config.h` from a backup made before running # the component. # * Check out `Makefile`, `library/Makefile`, `programs/Makefile`, # `tests/Makefile` and `programs/fuzz/Makefile` from git. # This cleans up after an in-tree use of CMake. # # The tests are roughly in order from fastest to slowest. This doesn't # have to be exact, but in general you should add slower tests towards # the end and fast checks near the beginning. ################################################################ #### Initialization and command line parsing ################################################################ # Abort on errors (even on the left-hand side of a pipe). # Treat uninitialised variables as errors. set -e -o pipefail -u pre_check_environment () { if [ -d library -a -d include -a -d tests ]; then :; else echo "Must be run from mbed TLS root" >&2 exit 1 fi } pre_initialize_variables () { CONFIG_H='include/mbedtls/config.h' CRYPTO_CONFIG_H='include/psa/crypto_config.h' # Files that are clobbered by some jobs will be backed up. Use a different # suffix from auxiliary scripts so that all.sh and auxiliary scripts can # independently decide when to remove the backup file. backup_suffix='.all.bak' # Files clobbered by config.py files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H" # Files clobbered by in-tree cmake files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile" append_outcome=0 MEMORY=0 FORCE=0 QUIET=0 KEEP_GOING=0 # Seed value used with the --release-test option. # # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if # both values are kept in sync. If you change the value here because it # breaks some tests, you'll definitely want to change it in # basic-build-test.sh as well. RELEASE_SEED=1 : ${MBEDTLS_TEST_OUTCOME_FILE=} : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"} export MBEDTLS_TEST_OUTCOME_FILE export MBEDTLS_TEST_PLATFORM # Default commands, can be overridden by the environment : ${OPENSSL:="openssl"} : ${OPENSSL_LEGACY:="$OPENSSL"} : ${OPENSSL_NEXT:="$OPENSSL"} : ${GNUTLS_CLI:="gnutls-cli"} : ${GNUTLS_SERV:="gnutls-serv"} : ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"} : ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"} : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build} : ${ARMC5_BIN_DIR:=/usr/bin} : ${ARMC6_BIN_DIR:=/usr/bin} : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-} : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-} # if MAKEFLAGS is not set add the -j option to speed up invocations of make if [ -z "${MAKEFLAGS+set}" ]; then export MAKEFLAGS="-j$(all_sh_nproc)" fi # Include more verbose output for failing tests run by CMake or make export CTEST_OUTPUT_ON_FAILURE=1 # CFLAGS and LDFLAGS for Asan builds that don't use CMake ASAN_CFLAGS='-Werror -Wall -Wextra -fsanitize=address,undefined -fno-sanitize-recover=all' # Gather the list of available components. These are the functions # defined in this script whose name starts with "component_". # Parse the script with sed. This way we get the functions in the order # they are defined. ALL_COMPONENTS=$(sed -n 's/^ *component_\([0-9A-Z_a-z]*\) *().*/\1/p' <"$0") # Exclude components that are not supported on this platform. SUPPORTED_COMPONENTS= for component in $ALL_COMPONENTS; do case $(type "support_$component" 2>&1) in *' function'*) if ! support_$component; then continue; fi;; esac SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component" done } # Test whether the component $1 is included in the command line patterns. is_component_included() { # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS # only does word splitting. set -f for pattern in $COMMAND_LINE_COMPONENTS; do set +f case ${1#component_} in $pattern) return 0;; esac done set +f return 1 } usage() { cat < Prefix for a cross-compiler for arm-none-eabi (default: "${ARM_NONE_EABI_GCC_PREFIX}") --arm-linux-gnueabi-gcc-prefix= Prefix for a cross-compiler for arm-linux-gnueabi (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}") --armcc Run ARM Compiler builds (on by default). --restore First clean up the build tree, restoring backed up files. Do not run any components unless they are explicitly specified. --error-test Error test mode: run a failing function in addition to any specified component. May be repeated. --except Exclude the COMPONENTs listed on the command line, instead of running only those. --no-append-outcome Write a new outcome file and analyze it (default). --no-armcc Skip ARM Compiler builds. --no-force Refuse to overwrite modified files (default). --no-keep-going Stop at the first error (default). --no-memory No additional memory tests (default). --no-quiet Print full ouput from components. --out-of-source-dir= Directory used for CMake out-of-source build tests. --outcome-file= File where test outcomes are written (not done if empty; default: \$MBEDTLS_TEST_OUTCOME_FILE). --random-seed Use a random seed value for randomized tests (default). -r|--release-test Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}. -s|--seed Integer seed value to use for this test run. Tool path options: --armc5-bin-dir= ARM Compiler 5 bin directory. --armc6-bin-dir= ARM Compiler 6 bin directory. --gnutls-cli= GnuTLS client executable to use for most tests. --gnutls-serv= GnuTLS server executable to use for most tests. --gnutls-legacy-cli= GnuTLS client executable to use for legacy tests. --gnutls-legacy-serv= GnuTLS server executable to use for legacy tests. --openssl= OpenSSL executable to use for most tests. --openssl-legacy= OpenSSL executable to use for legacy tests e.g. SSLv3. --openssl-next= OpenSSL executable to use for recent things like ARIA EOF } # Cleanup before/after running a component. # Remove built files as well as the cmake cache/config. # Does not remove generated source files. cleanup() { command make clean # Remove CMake artefacts find . -name .git -prune -o \ -iname CMakeFiles -exec rm -rf {} \+ -o \ \( -iname cmake_install.cmake -o \ -iname CTestTestfile.cmake -o \ -iname CMakeCache.txt \) -exec rm {} \+ # Recover files overwritten by in-tree CMake builds rm -f include/Makefile include/mbedtls/Makefile programs/*/Makefile # Remove any artifacts from the component_test_cmake_as_subdirectory test. rm -rf programs/test/cmake_subproject/build rm -f programs/test/cmake_subproject/Makefile rm -f programs/test/cmake_subproject/cmake_subproject # Restore files that may have been clobbered by the job for x in $files_to_back_up; do cp -p "$x$backup_suffix" "$x" done } # Final cleanup when this script exits (except when exiting on a failure # in non-keep-going mode). final_cleanup () { cleanup for x in $files_to_back_up; do rm -f "$x$backup_suffix" done } # Executed on exit. May be redefined depending on command line options. final_report () { : } fatal_signal () { final_cleanup final_report $1 trap - $1 kill -$1 $$ } trap 'fatal_signal HUP' HUP trap 'fatal_signal INT' INT trap 'fatal_signal TERM' TERM # Number of processors on this machine. Used as the default setting # for parallel make. all_sh_nproc () { { nproc || # Linux sysctl -n hw.ncpuonline || # NetBSD, OpenBSD sysctl -n hw.ncpu || # FreeBSD echo 1 } 2>/dev/null } msg() { if [ -n "${current_component:-}" ]; then current_section="${current_component#component_}: $1" else current_section="$1" fi if [ $QUIET -eq 1 ]; then return fi echo "" echo "******************************************************************" echo "* $current_section " printf "* "; date echo "******************************************************************" } armc6_build_test() { FLAGS="$1" msg "build: ARM Compiler 6 ($FLAGS)" ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \ WARNING_CFLAGS='-xc -std=c99' make lib msg "size: ARM Compiler 6 ($FLAGS)" "$ARMC6_FROMELF" -z library/*.o make clean } err_msg() { echo "$1" >&2 } check_tools() { for TOOL in "$@"; do if ! `type "$TOOL" >/dev/null 2>&1`; then err_msg "$TOOL not found!" exit 1 fi done } pre_parse_command_line () { COMMAND_LINE_COMPONENTS= all_except=0 error_test=0 restore_first=0 no_armcc= # Note that legacy options are ignored instead of being omitted from this # list of options, so invocations that worked with previous version of # all.sh will still run and work properly. while [ $# -gt 0 ]; do case "$1" in --append-outcome) append_outcome=1;; --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";; --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";; --armcc) no_armcc=;; --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";; --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";; --error-test) error_test=$((error_test + 1));; --except) all_except=1;; --force|-f) FORCE=1;; --gnutls-cli) shift; GNUTLS_CLI="$1";; --gnutls-legacy-cli) shift; GNUTLS_LEGACY_CLI="$1";; --gnutls-legacy-serv) shift; GNUTLS_LEGACY_SERV="$1";; --gnutls-serv) shift; GNUTLS_SERV="$1";; --help|-h) usage; exit;; --keep-going|-k) KEEP_GOING=1;; --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;; --list-components) printf '%s\n' $SUPPORTED_COMPONENTS; exit;; --memory|-m) MEMORY=1;; --no-append-outcome) append_outcome=0;; --no-armcc) no_armcc=1;; --no-force) FORCE=0;; --no-keep-going) KEEP_GOING=0;; --no-memory) MEMORY=0;; --no-quiet) QUIET=0;; --openssl) shift; OPENSSL="$1";; --openssl-legacy) shift; OPENSSL_LEGACY="$1";; --openssl-next) shift; OPENSSL_NEXT="$1";; --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";; --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";; --quiet|-q) QUIET=1;; --random-seed) unset SEED;; --release-test|-r) SEED=$RELEASE_SEED;; --restore) restore_first=1;; --seed|-s) shift; SEED="$1";; -*) echo >&2 "Unknown option: $1" echo >&2 "Run $0 --help for usage." exit 120 ;; *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";; esac shift done # With no list of components, run everything. if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then all_except=1 fi # --no-armcc is a legacy option. The modern way is --except '*_armcc*'. # Ignore it if components are listed explicitly on the command line. if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*" fi # Error out if an explicitly requested component doesn't exist. if [ $all_except -eq 0 ]; then unsupported=0 # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS # only does word splitting. set -f for component in $COMMAND_LINE_COMPONENTS; do set +f # If the requested name includes a wildcard character, don't # check it. Accept wildcard patterns that don't match anything. case $component in *[*?\[]*) continue;; esac case " $SUPPORTED_COMPONENTS " in *" $component "*) :;; *) echo >&2 "Component $component was explicitly requested, but is not known or not supported." unsupported=$((unsupported + 1));; esac done set +f if [ $unsupported -ne 0 ]; then exit 2 fi fi # Build the list of components to run. RUN_COMPONENTS= for component in $SUPPORTED_COMPONENTS; do if is_component_included "$component"; [ $? -eq $all_except ]; then RUN_COMPONENTS="$RUN_COMPONENTS $component" fi done unset all_except unset no_armcc } pre_check_git () { if [ $FORCE -eq 1 ]; then rm -rf "$OUT_OF_SOURCE_DIR" git checkout-index -f -q $CONFIG_H cleanup else if [ -d "$OUT_OF_SOURCE_DIR" ]; then echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2 echo "You can either delete this directory manually, or force the test by rerunning" echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR" exit 1 fi if ! git diff --quiet include/mbedtls/config.h; then err_msg "Warning - the configuration file 'include/mbedtls/config.h' has been edited. " echo "You can either delete or preserve your work, or force the test by rerunning the" echo "script as: $0 --force" exit 1 fi fi } pre_restore_files () { # If the makefiles have been generated by a framework such as cmake, # restore them from git. If the makefiles look like modifications from # the ones checked into git, take care not to modify them. Whatever # this function leaves behind is what the script will restore before # each component. case "$(head -n1 Makefile)" in *[Gg]enerated*) git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile ;; esac } pre_back_up () { for x in $files_to_back_up; do cp -p "$x" "$x$backup_suffix" done } pre_setup_keep_going () { failure_count=0 # Number of failed components last_failure_status=0 # Last failure status in this component # See err_trap previous_failure_status=0 previous_failed_command= previous_failure_funcall_depth=0 unset report_failed_command start_red= end_color= if [ -t 1 ]; then case "${TERM:-}" in *color*|cygwin|linux|rxvt*|screen|[Eex]term*) start_red=$(printf '\033[31m') end_color=$(printf '\033[0m') ;; esac fi # Keep a summary of failures in a file. We'll print it out at the end. failure_summary_file=$PWD/all-sh-failures-$$.log : >"$failure_summary_file" # Whether it makes sense to keep a component going after the specified # command fails (test command) or not (configure or build). # This function normally receives the failing simple command # ($BASH_COMMAND) as an argument, but if $report_failed_command is set, # this is passed instead. # This doesn't have to be 100% accurate: all failures are recorded anyway. # False positives result in running things that can't be expected to # work. False negatives result in things not running after something else # failed even though they might have given useful feedback. can_keep_going_after_failure () { case "$1" in "msg "*) false;; "cd "*) false;; *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ... *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ... *make*check*) true;; "grep "*) true;; "[ "*) true;; "! "*) true;; *) false;; esac } # This function runs if there is any error in a component. # It must either exit with a nonzero status, or set # last_failure_status to a nonzero value. err_trap () { # Save $? (status of the failing command). This must be the very # first thing, before $? is overridden. last_failure_status=$? failed_command=${report_failed_command-$BASH_COMMAND} if [[ $last_failure_status -eq $previous_failure_status && "$failed_command" == "$previous_failed_command" && ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]] then # The same command failed twice in a row, but this time one level # less deep in the function call stack. This happens when the last # command of a function returns a nonzero status, and the function # returns that same status. Ignore the second failure. previous_failure_funcall_depth=${#FUNCNAME[@]} return fi previous_failure_status=$last_failure_status previous_failed_command=$failed_command previous_failure_funcall_depth=${#FUNCNAME[@]} text="$current_section: $failed_command -> $last_failure_status" echo "${start_red}^^^^$text^^^^${end_color}" >&2 echo "$text" >>"$failure_summary_file" # If the command is fatal (configure or build command), stop this # component. Otherwise (test command) keep the component running # (run more tests from the same build). if ! can_keep_going_after_failure "$failed_command"; then exit $last_failure_status fi } final_report () { if [ $failure_count -gt 0 ]; then echo echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" echo "${start_red}FAILED: $failure_count components${end_color}" cat "$failure_summary_file" echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" elif [ -z "${1-}" ]; then echo "SUCCESS :)" fi if [ -n "${1-}" ]; then echo "Killed by SIG$1." fi rm -f "$failure_summary_file" if [ $failure_count -gt 0 ]; then exit 1 fi } } # record_status() and if_build_succeeded() are kept temporarily for backward # compatibility. Don't use them in new components. record_status () { "$@" } if_build_succeeded () { "$@" } # '! true' does not trigger the ERR trap. Arrange to trigger it, with # a reasonably informative error message (not just "$@"). not () { if "$@"; then report_failed_command="! $*" false unset report_failed_command fi } pre_prepare_outcome_file () { case "$MBEDTLS_TEST_OUTCOME_FILE" in [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";; esac if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then rm -f "$MBEDTLS_TEST_OUTCOME_FILE" fi } pre_print_configuration () { if [ $QUIET -eq 1 ]; then return fi msg "info: $0 configuration" echo "MEMORY: $MEMORY" echo "FORCE: $FORCE" echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}" echo "SEED: ${SEED-"UNSET"}" echo echo "OPENSSL: $OPENSSL" echo "OPENSSL_LEGACY: $OPENSSL_LEGACY" echo "OPENSSL_NEXT: $OPENSSL_NEXT" echo "GNUTLS_CLI: $GNUTLS_CLI" echo "GNUTLS_SERV: $GNUTLS_SERV" echo "GNUTLS_LEGACY_CLI: $GNUTLS_LEGACY_CLI" echo "GNUTLS_LEGACY_SERV: $GNUTLS_LEGACY_SERV" echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR" echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR" } # Make sure the tools we need are available. pre_check_tools () { # Build the list of variables to pass to output_env.sh. set env case " $RUN_COMPONENTS " in # Require OpenSSL and GnuTLS if running any tests (as opposed to # only doing builds). Not all tests run OpenSSL and GnuTLS, but this # is a good enough approximation in practice. *" test_"*) # To avoid setting OpenSSL and GnuTLS for each call to compat.sh # and ssl-opt.sh, we just export the variables they require. export OPENSSL_CMD="$OPENSSL" export GNUTLS_CLI="$GNUTLS_CLI" export GNUTLS_SERV="$GNUTLS_SERV" # Avoid passing --seed flag in every call to ssl-opt.sh if [ -n "${SEED-}" ]; then export SEED fi set "$@" OPENSSL="$OPENSSL" OPENSSL_LEGACY="$OPENSSL_LEGACY" set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV" set "$@" GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI" set "$@" GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV" check_tools "$OPENSSL" "$OPENSSL_LEGACY" "$OPENSSL_NEXT" \ "$GNUTLS_CLI" "$GNUTLS_SERV" \ "$GNUTLS_LEGACY_CLI" "$GNUTLS_LEGACY_SERV" ;; esac case " $RUN_COMPONENTS " in *_doxygen[_\ ]*) check_tools "doxygen" "dot";; esac case " $RUN_COMPONENTS " in *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";; esac case " $RUN_COMPONENTS " in *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";; esac case " $RUN_COMPONENTS " in *" test_zeroize "*) check_tools "gdb";; esac case " $RUN_COMPONENTS " in *_armcc*) ARMC5_CC="$ARMC5_BIN_DIR/armcc" ARMC5_AR="$ARMC5_BIN_DIR/armar" ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf" ARMC6_CC="$ARMC6_BIN_DIR/armclang" ARMC6_AR="$ARMC6_BIN_DIR/armar" ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf" check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \ "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";; esac # past this point, no call to check_tool, only printing output if [ $QUIET -eq 1 ]; then return fi msg "info: output_env.sh" case $RUN_COMPONENTS in *_armcc*) set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;; *) set "$@" RUN_ARMCC=0;; esac "$@" scripts/output_env.sh } ################################################################ #### Basic checks ################################################################ # # Test Suites to be executed # # The test ordering tries to optimize for the following criteria: # 1. Catch possible problems early, by running first tests that run quickly # and/or are more likely to fail than others (eg I use Clang most of the # time, so start with a GCC build). # 2. Minimize total running time, by avoiding useless rebuilds # # Indicative running times are given for reference. component_check_recursion () { msg "Check: recursion.pl" # < 1s tests/scripts/recursion.pl library/*.c } component_check_generated_files () { msg "Check: freshness of generated source files" # < 1s tests/scripts/check-generated-files.sh } component_check_doxy_blocks () { msg "Check: doxygen markup outside doxygen blocks" # < 1s tests/scripts/check-doxy-blocks.pl } component_check_files () { msg "Check: file sanity checks (permissions, encodings)" # < 1s tests/scripts/check_files.py } component_check_changelog () { msg "Check: changelog entries" # < 1s rm -f ChangeLog.new scripts/assemble_changelog.py -o ChangeLog.new if [ -e ChangeLog.new ]; then # Show the diff for information. It isn't an error if the diff is # non-empty. diff -u ChangeLog ChangeLog.new || true rm ChangeLog.new fi } component_check_names () { msg "Check: declared and exported names (builds the library)" # < 3s tests/scripts/check_names.py -v } component_check_test_cases () { msg "Check: test case descriptions" # < 1s if [ $QUIET -eq 1 ]; then opt='--quiet' else opt='' fi tests/scripts/check_test_cases.py $opt unset opt } component_check_doxygen_warnings () { msg "Check: doxygen warnings (builds the documentation)" # ~ 3s tests/scripts/doxygen.sh } ################################################################ #### Build and test many configurations and targets ################################################################ component_test_default_out_of_box () { msg "build: make, default config (out-of-box)" # ~1min make # Disable fancy stuff SAVE_MBEDTLS_TEST_OUTCOME_FILE="$MBEDTLS_TEST_OUTCOME_FILE" unset MBEDTLS_TEST_OUTCOME_FILE msg "test: main suites make, default config (out-of-box)" # ~10s make test msg "selftest: make, default config (out-of-box)" # ~10s programs/test/selftest export MBEDTLS_TEST_OUTCOME_FILE="$SAVE_MBEDTLS_TEST_OUTCOME_FILE" unset SAVE_MBEDTLS_TEST_OUTCOME_FILE } component_test_default_cmake_gcc_asan () { msg "build: cmake, gcc, ASan" # ~ 1 min 50s CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (ASan build)" # ~ 1 min tests/ssl-opt.sh msg "test: compat.sh (ASan build)" # ~ 6 min tests/compat.sh msg "test: context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_full_cmake_gcc_asan () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, ASan build)" make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (full config, ASan build)" tests/ssl-opt.sh msg "test: compat.sh (full config, ASan build)" tests/compat.sh msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec tests/context-info.sh } component_test_psa_crypto_key_id_encodes_owner () { msg "build: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" make test } # check_renamed_symbols HEADER LIB # Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol # name is LIB. check_renamed_symbols () { ! nm "$2" | sed 's/.* //' | grep -x -F "$(sed -n 's/^ *# *define *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")" } component_build_psa_crypto_spm () { msg "build: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM # We can only compile, not link, since our test and sample programs # aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM # is active. make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib # Check that if a symbol is renamed by crypto_spe.h, the non-renamed # version is not present. echo "Checking for renamed symbols in the library" check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a } component_test_psa_crypto_client () { msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT, make" scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT make msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT, make" make test } component_test_zlib_make() { msg "build: zlib enabled, make" scripts/config.py set MBEDTLS_ZLIB_SUPPORT make ZLIB=1 CFLAGS='-Werror -O2' msg "test: main suites (zlib, make)" make test msg "test: ssl-opt.sh (zlib, make)" tests/ssl-opt.sh } support_test_zlib_make () { base=support_test_zlib_$$ cat <<'EOF' > ${base}.c #include "zlib.h" int main(void) { return 0; } EOF gcc -o ${base}.exe ${base}.c -lz 2>/dev/null ret=$? rm -f ${base}.* return $ret } component_test_zlib_cmake() { msg "build: zlib enabled, cmake" scripts/config.py set MBEDTLS_ZLIB_SUPPORT cmake -D ENABLE_ZLIB_SUPPORT=On -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites (zlib, cmake)" make test msg "test: ssl-opt.sh (zlib, cmake)" tests/ssl-opt.sh } support_test_zlib_cmake () { support_test_zlib_make "$@" } component_test_psa_crypto_rsa_no_genprime() { msg "build: default config minus MBEDTLS_GENPRIME" scripts/config.py unset MBEDTLS_GENPRIME make msg "test: default config minus MBEDTLS_GENPRIME" make test } component_test_ref_configs () { msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . tests/scripts/test-ref-configs.pl } component_test_sslv3 () { msg "build: Default + SSLv3 (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_SSL_PROTO_SSL3 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: SSLv3 - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "build: SSLv3 - compat.sh (ASan build)" # ~ 6 min tests/compat.sh -m 'tls1 tls1_1 tls12 dtls1 dtls12' env OPENSSL_CMD="$OPENSSL_LEGACY" tests/compat.sh -m 'ssl3' msg "build: SSLv3 - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh msg "build: SSLv3 - context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_no_renegotiation () { msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_no_pem_no_fs () { msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)" scripts/config.py unset MBEDTLS_PEM_PARSE_C scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_rsa_no_crt () { msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_RSA_NO_CRT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f RSA msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min tests/compat.sh -t RSA msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_no_ctr_drbg_classic () { msg "build: Full minus CTR_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, classic crypto - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_ctr_drbg_use_psa () { msg "build: Full minus CTR_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_hmac_drbg_classic () { msg "build: Full minus HMAC_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, classic crypto - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_no_hmac_drbg_use_psa () { msg "build: Full minus HMAC_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_psa_external_rng_no_drbg_classic () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py set MBEDTLS_ECP_NO_INTERNAL_RNG # When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG, # the SSL test programs don't have an RNG and can't work. Explicitly # make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG. make CFLAGS="$ASAN_CFLAGS -O2 -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default' } component_test_psa_external_rng_no_drbg_use_psa () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py set MBEDTLS_ECP_NO_INTERNAL_RNG make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_psa_external_rng_use_psa_crypto () { msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_CTR_DRBG_C make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" make test msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_ecp_no_internal_rng () { msg "build: Default plus ECP_NO_INTERNAL_RNG minus DRBG modules" scripts/config.py set MBEDTLS_ECP_NO_INTERNAL_RNG scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py unset MBEDTLS_PSA_CRYPTO_C # requires a DRBG scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA Crypto CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: ECP_NO_INTERNAL_RNG, no DRBG module" make test # no SSL tests as they all depend on having a DRBG } component_test_ecp_restartable_no_internal_rng () { msg "build: Default plus ECP_RESTARTABLE and ECP_NO_INTERNAL_RNG, no DRBG" scripts/config.py set MBEDTLS_ECP_NO_INTERNAL_RNG scripts/config.py set MBEDTLS_ECP_RESTARTABLE scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py unset MBEDTLS_PSA_CRYPTO_C # requires CTR_DRBG scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA Crypto CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: ECP_RESTARTABLE and ECP_NO_INTERNAL_RNG, no DRBG module" make test # no SSL tests as they all depend on having a DRBG } component_test_new_ecdh_context () { msg "build: new ECDH context (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_ECDH_LEGACY_CONTEXT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: new ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: new ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: new ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARCFOUR\|ARIA\|CAMELLIA\|CHACHA\|DES\|RC4' } component_test_everest () { msg "build: Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_ECDH_LEGACY_CONTEXT scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARCFOUR\|ARIA\|CAMELLIA\|CHACHA\|DES\|RC4' } component_test_everest_curve25519_only () { msg "build: Everest ECDH context, only Curve25519" # ~ 6 min scripts/config.py unset MBEDTLS_ECDH_LEGACY_CONTEXT scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED # Disable all curves for c in $(sed -n 's/#define \(MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED\).*/\1/p' <"$CONFIG_H"); do scripts/config.py unset "$c" done scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: Everest ECDH context, only Curve25519" # ~ 50s make test } component_test_small_ssl_out_content_len () { msg "build: small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests" tests/ssl-opt.sh -f "Max fragment\|Large packet" } component_test_small_ssl_in_content_len () { msg "build: small SSL_IN_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests" tests/ssl-opt.sh -f "Max fragment" } component_test_small_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg" } component_test_small_mbedtls_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket" } component_test_psa_collect_statuses () { msg "build+test: psa_collect_statuses" # ~30s scripts/config.py full tests/scripts/psa_collect_statuses.py # Check that psa_crypto_init() succeeded at least once grep -q '^0:psa_crypto_init:' tests/statuses.log rm -f tests/statuses.log } component_test_full_cmake_clang () { msg "build: cmake, full config, clang" # ~ 50s scripts/config.py full CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On . make msg "test: main suites (full config, clang)" # ~ 5s make test msg "test: psa_constant_names (full config, clang)" # ~ 1s tests/scripts/test_psa_constant_names.py msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private' msg "test: compat.sh RC4, DES, 3DES & NULL (full config)" # ~ 2 min env OPENSSL_CMD="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '^$' -f 'NULL\|DES\|RC4\|ARCFOUR' msg "test: compat.sh ARIA + ChachaPoly" env OPENSSL_CMD="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' } component_test_memsan_constant_flow () { # This tests both (1) accesses to undefined memory, and (2) branches or # memory access depending on secret values. To distinguish between those: # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist? # - or alternatively, change the build type to MemSanDbg, which enables # origin tracking and nicer stack traces (which are useful for debugging # anyway), and check if the origin was TEST_CF_SECRET() or something else. msg "build: cmake MSan (clang), full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (Msan + constant flow)" make test } component_test_valgrind_constant_flow () { # This tests both (1) everything that valgrind's memcheck usually checks # (heap buffer overflows, use of uninitialized memory, use-after-free, # etc.) and (2) branches or memory access depending on secret values, # which will be reported as uninitialized memory. To distinguish between # secret and actually uninitialized: # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist? # - or alternatively, build with debug info and manually run the offending # test suite with valgrind --track-origins=yes, then check if the origin # was TEST_CF_SECRET() or something else. msg "build: cmake release GCC, full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND cmake -D CMAKE_BUILD_TYPE:String=Release . make # this only shows a summary of the results (how many of each type) # details are left in Testing//DynamicAnalysis.xml msg "test: main suites (valgrind + constant flow)" make memcheck } component_test_default_no_deprecated () { # Test that removing the deprecated features from the default # configuration leaves something consistent. msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s scripts/config.py set MBEDTLS_DEPRECATED_REMOVED make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s make test } component_test_full_no_deprecated () { msg "build: make, full_no_deprecated config" # ~ 30s scripts/config.py full_no_deprecated make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config" # ~ 5s make test } component_test_full_no_deprecated_deprecated_warning () { # Test that there is nothing deprecated in "full_no_deprecated". # A deprecated feature would trigger a warning (made fatal) from # MBEDTLS_DEPRECATED_WARNING. msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s scripts/config.py full_no_deprecated scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED scripts/config.py set MBEDTLS_DEPRECATED_WARNING make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s make test } component_test_full_deprecated_warning () { # Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes # with only certain whitelisted types of warnings. msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_DEPRECATED_WARNING # Expect warnings from '#warning' directives in check_config.h. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s # Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features. # By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set. # Expect warnings from '#warning' directives in check_config.h and # from the use of deprecated functions in test suites. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s make test } # Check that the specified libraries exist and are empty. are_empty_libraries () { nm "$@" >/dev/null 2>/dev/null ! nm "$@" 2>/dev/null | grep -v ':$' | grep . } component_build_crypto_default () { msg "build: make, crypto only" scripts/config.py crypto make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_full () { msg "build: make, crypto only, full config" scripts/config.py crypto_full make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_baremetal () { msg "build: make, crypto only, baremetal config" scripts/config.py crypto_baremetal make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_test_depends_curves () { msg "test/build: curves.pl (gcc)" # ~ 4 min tests/scripts/curves.pl } component_test_depends_curves_psa () { msg "test/build: curves.pl with MBEDTLS_USE_PSA_CRYPTO defined (gcc)" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO tests/scripts/curves.pl } component_test_depends_hashes () { msg "test/build: depends-hashes.pl (gcc)" # ~ 2 min tests/scripts/depends-hashes.pl } component_test_depends_hashes_psa () { msg "test/build: depends-hashes.pl with MBEDTLS_USE_PSA_CRYPTO defined (gcc)" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO tests/scripts/depends-hashes.pl } component_test_depends_pkalgs () { msg "test/build: depends-pkalgs.pl (gcc)" # ~ 2 min tests/scripts/depends-pkalgs.pl } component_test_depends_pkalgs_psa () { msg "test/build: depends-pkalgs.pl with MBEDTLS_USE_PSA_CRYPTO defined (gcc)" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO tests/scripts/depends-pkalgs.pl } component_build_key_exchanges () { msg "test/build: key-exchanges (gcc)" # ~ 1 min tests/scripts/key-exchanges.pl } component_test_make_cxx () { msg "build: Unix make, full, gcc + g++" scripts/config.py full make TEST_CPP=1 lib programs msg "test: cpp_dummy_build" programs/test/cpp_dummy_build } component_test_no_use_psa_crypto_full_cmake_asan() { # full minus MBEDTLS_USE_PSA_CRYPTO: run the same set of tests as basic-build-test.sh msg "build: cmake, full config minus MBEDTLS_USE_PSA_CRYPTO, ASan" scripts/config.py full scripts/config.py set MBEDTLS_ECP_RESTARTABLE # not using PSA, so enable restartable ECC scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO)" make test msg "test: ssl-opt.sh (full minus MBEDTLS_USE_PSA_CRYPTO)" tests/ssl-opt.sh msg "test: compat.sh default (full minus MBEDTLS_USE_PSA_CRYPTO)" tests/compat.sh msg "test: compat.sh RC4, DES & NULL (full minus MBEDTLS_USE_PSA_CRYPTO)" env OPENSSL_CMD="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '3DES\|DES-CBC3' -f 'NULL\|DES\|RC4\|ARCFOUR' msg "test: compat.sh ARIA + ChachaPoly (full minus MBEDTLS_USE_PSA_CRYPTO)" env OPENSSL_CMD="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' } component_test_psa_crypto_config_accel_ecdsa () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having # partial support for cipher operations in the driver test library. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING # SHA384 needed for some ECDSA signature tests. scripts/config.py -f tests/include/test/drivers/config_test_driver.h set MBEDTLS_SHA512_C loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA KEY_TYPE_ECC_KEY_PAIR KEY_TYPE_ECC_PUBLIC_KEY" loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) make -C tests libtestdriver1.a CFLAGS="$ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS" # Restore test driver base configuration scripts/config.py -f tests/include/test/drivers/config_test_driver.h unset MBEDTLS_SHA512_C scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )" make CFLAGS="$ASAN_CFLAGS -O -Werror -I../tests/include -I../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" unset loc_accel_flags unset loc_accel_list if_build_succeeded not grep mbedtls_ecdsa_ library/ecdsa.o msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" make test } component_test_psa_crypto_config_accel_rsa_signature () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated RSA signature" # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having # partial support for cipher operations in the driver test library. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING # It seems it is not possible to remove only the support for RSA signature # in the library. Thus we have to remove all RSA support (signature and # encryption/decryption). AS there is no driver support for asymmetric # encryption/decryption so far remove RSA encryption/decryption from the # application algorithm list. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT # Make sure both the library and the test library support the SHA hash # algorithms and only those ones (SHA256 is included by default). That way: # - the test library can compute the RSA signatures even in the case of a # composite RSA signature algorithm based on a SHA hash (no other hash # used in the unit tests). # - the dependency of RSA signature tests on PSA_WANT_ALG_SHA_xyz is # fulfilled as the hash SHA algorithm is supported by the library, and # thus the tests are run, not skipped. # - when testing a signature key with an algorithm wildcard built from # PSA_ALG_ANY_HASH as algorithm to test with the key, the chosen hash # algorithm based on the hashes supported by the library is also # supported by the test library. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h set MBEDTLS_SHA1_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h set MBEDTLS_SHA512_C # We need PEM parsing in the test library as well to support the import # of PEM encoded RSA keys. scripts/config.py -f tests/include/test/drivers/config_test_driver.h set MBEDTLS_PEM_PARSE_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h set MBEDTLS_BASE64_C loc_accel_list="ALG_RSA_PKCS1V15_SIGN ALG_RSA_PSS KEY_TYPE_RSA_KEY_PAIR KEY_TYPE_RSA_PUBLIC_KEY" loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) make -C tests libtestdriver1.a CFLAGS="$ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS" # Restore test driver base configuration scripts/config.py -f tests/include/test/drivers/config_test_driver.h unset MBEDTLS_SHA1_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h unset MBEDTLS_SHA512_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h unset MBEDTLS_PEM_PARSE_C scripts/config.py -f tests/include/test/drivers/config_test_driver.h unset MBEDTLS_BASE64_C # Mbed TLS library build scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG # Remove RSA support and its dependencies scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_MD2_C scripts/config.py unset MBEDTLS_MD4_C scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1 scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_1 scripts/config.py unset MBEDTLS_SSL_CBC_RECORD_SPLITTING loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )" make CFLAGS="$ASAN_CFLAGS -Werror -I../tests/include -I../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" unset loc_accel_flags unset loc_accel_list if_build_succeeded not grep mbedtls_rsa_rsassa_pkcs1_v15_sign library/rsa.o if_build_succeeded not grep mbedtls_rsa_rsassa_pss_sign_ext library/rsa.o msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated RSA signature" make test } component_test_psa_crypto_config_accel_hash () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having # partial support for cipher operations in the driver test library. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING loc_accel_list="ALG_MD4 ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) make -C tests libtestdriver1.a CFLAGS="$ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS" scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_MD2_C scripts/config.py unset MBEDTLS_MD4_C scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SHA1_C # Don't unset MBEDTLS_SHA256_C as it is needed by PSA crypto core. scripts/config.py unset MBEDTLS_SHA512_C # Unset MBEDTLS_SSL_PROTO_SSL3, MBEDTLS_SSL_PROTO_TLS1 and MBEDTLS_SSL_PROTO_TLS1_1 as they depend on MBEDTLS_SHA1_C scripts/config.py unset MBEDTLS_SSL_PROTO_SSL3 scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1 scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_1 # Unset MBEDTLS_SSL_CBC_RECORD_SPLITTING as it depends on MBEDTLS_SSL_PROTO_TLS1 in the default configuration. scripts/config.py unset MBEDTLS_SSL_CBC_RECORD_SPLITTING loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )" make CFLAGS="$ASAN_CFLAGS -Werror -I../tests/include -I../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" unset loc_accel_flags unset loc_accel_list if_build_succeeded not grep mbedtls_sha512_init library/sha512.o if_build_succeeded not grep mbedtls_sha1_init library/sha1.o msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" make test } component_test_psa_crypto_config_accel_cipher () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated cipher" loc_accel_list="ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB ALG_OFB ALG_XTS KEY_TYPE_DES" loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) make -C tests libtestdriver1.a CFLAGS="$ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS" scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG # There is no intended accelerator support for ALG STREAM_CIPHER and # ALG_ECB_NO_PADDING. Therefore, asking for them in the build implies the # inclusion of the Mbed TLS cipher operations. As we want to test here with # cipher operations solely supported by accelerators, disabled those # PSA configuration options. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_CMAC scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7 scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_DES_C loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )" make CFLAGS="$ASAN_CFLAGS -Werror -I../tests/include -I../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" unset loc_accel_flags unset loc_accel_list if_build_succeeded not grep mbedtls_des* library/des.o msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" make test } component_test_psa_crypto_config_no_driver() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG minus MBEDTLS_PSA_CRYPTO_DRIVERS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO make CC=gcc CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: full + MBEDTLS_PSA_CRYPTO_CONFIG minus MBEDTLS_PSA_CRYPTO_DRIVERS" make test } component_test_psa_crypto_config_chachapoly_disabled() { # full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305 msg "build: full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305" scripts/config.py full scripts/config.py unset MBEDTLS_CHACHAPOLY_C scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_GCM scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_CHACHA20_POLY1305 make CC=gcc CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305" make test } # This should be renamed to test and updated once the accelerator ECDSA code is in place and ready to test. component_build_psa_accel_alg_ecdsa() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_ECDSA # without MBEDTLS_ECDSA_C # PSA_WANT_ALG_ECDSA and PSA_WANT_ALG_DETERMINISTIC_ECDSA are already # set in include/psa/crypto_config.h msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_ECDSA without MBEDTLS_ECDSA_C" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDSA -DMBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test. component_build_psa_accel_alg_ecdh() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_ECDH # without MBEDTLS_ECDH_C msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator ECC key pair code is in place and ready to test. component_build_psa_accel_key_type_ecc_key_pair() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_ECC_KEY_PAIR msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_KEY_PAIR" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR 1 scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator ECC public key code is in place and ready to test. component_build_psa_accel_key_type_ecc_public_key() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test. component_build_psa_accel_alg_hmac() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_HMAC msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HMAC" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test. component_build_psa_accel_alg_hkdf() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_HKDF # without MBEDTLS_HKDF_C msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_HKDF_C # Make sure to unset TLS1_3_EXPERIMENTAL since it requires HKDF_C and will not build properly without it. scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator MD2 code is in place and ready to test. component_build_psa_accel_alg_md2() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_MD2 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD2 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD2 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator MD4 code is in place and ready to test. component_build_psa_accel_alg_md4() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_MD4 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD4 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD4 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test. component_build_psa_accel_alg_md5() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_MD5 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD5 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test. component_build_psa_accel_alg_ripemd160() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RIPEMD160 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RIPEMD160 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test. component_build_psa_accel_alg_sha1() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_1 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_1 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test. component_build_psa_accel_alg_sha224() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_224 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_224 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test. component_build_psa_accel_alg_sha256() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_256 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_256 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test. component_build_psa_accel_alg_sha384() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_384 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_384 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test. component_build_psa_accel_alg_sha512() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_512 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_512 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD2 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD4 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_MD5 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_224 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_256 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_SHA_384 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_crypt() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PKCS1V15_CRYPT msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_sign() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PKCS1V15_SIGN and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_oaep() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_OAEP and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_OAEP 1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pss() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PSS and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_RSA_OAEP # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_key_pair() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_RSA_KEY_PAIR and PSA_WANT_ALG_RSA_PSS msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_public_key() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY and PSA_WANT_ALG_RSA_PSS msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f include/psa/crypto_config.h set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } component_test_check_params_functionality () { msg "build+test: MBEDTLS_CHECK_PARAMS functionality" scripts/config.py full # includes CHECK_PARAMS # Make MBEDTLS_PARAM_FAILED call mbedtls_param_failed(). scripts/config.py unset MBEDTLS_CHECK_PARAMS_ASSERT make CC=gcc CFLAGS='-Werror -O1' all test } component_test_check_params_without_platform () { msg "build+test: MBEDTLS_CHECK_PARAMS without MBEDTLS_PLATFORM_C" scripts/config.py full # includes CHECK_PARAMS # Keep MBEDTLS_PARAM_FAILED as assert. scripts/config.py unset MBEDTLS_PLATFORM_EXIT_ALT scripts/config.py unset MBEDTLS_PLATFORM_TIME_ALT scripts/config.py unset MBEDTLS_PLATFORM_FPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_MEMORY scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_PLATFORM_PRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_SNPRINTF_ALT scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_C make CC=gcc CFLAGS='-Werror -O1' all test } component_test_check_params_silent () { msg "build+test: MBEDTLS_CHECK_PARAMS with alternative MBEDTLS_PARAM_FAILED()" scripts/config.py full # includes CHECK_PARAMS # Set MBEDTLS_PARAM_FAILED to nothing. sed -i 's/.*\(#define MBEDTLS_PARAM_FAILED( cond )\).*/\1/' "$CONFIG_H" make CC=gcc CFLAGS='-Werror -O1' all test } component_test_no_platform () { # Full configuration build, without platform support, file IO and net sockets. # This should catch missing mbedtls_printf definitions, and by disabling file # IO, it should catch missing '#include ' msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_PLATFORM_C scripts/config.py unset MBEDTLS_NET_C scripts/config.py unset MBEDTLS_PLATFORM_MEMORY scripts/config.py unset MBEDTLS_PLATFORM_PRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_FPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_SNPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_TIME_ALT scripts/config.py unset MBEDTLS_PLATFORM_EXIT_ALT scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19, # to re-enable platform integration features otherwise disabled in C99 builds make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test } component_build_no_std_function () { # catch compile bugs in _uninit functions msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check . make } component_build_no_ssl_srv () { msg "build: full config except ssl_srv.c, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_SRV_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_ssl_cli () { msg "build: full config except ssl_cli.c, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_CLI_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_sockets () { # Note, C99 compliance can also be tested with the sockets support disabled, # as that requires a POSIX platform (which isn't the same as C99). msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc. scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib } component_test_memory_buffer_allocator_backtrace () { msg "build: default config with memory buffer allocator and backtrace enabled" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_BACKTRACE scripts/config.py set MBEDTLS_MEMORY_DEBUG CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE" make test } component_test_memory_buffer_allocator () { msg "build: default config with memory buffer allocator" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C" make test msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C" # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out. tests/ssl-opt.sh -e '^DTLS proxy' } component_test_no_max_fragment_length () { # Run max fragment length tests with MFL disabled msg "build: default config except MFL extension (ASan build)" # ~ 30s scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: ssl-opt.sh, MFL-related tests" tests/ssl-opt.sh -f "Max fragment length" } component_test_asan_remove_peer_certificate () { msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)" scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" make test msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/ssl-opt.sh msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/compat.sh msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/context-info.sh } component_test_no_max_fragment_length_small_ssl_out_content_len () { msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MFL tests (disabled MFL extension case) & large packet tests" tests/ssl-opt.sh -f "Max fragment length\|Large buffer" msg "test: context-info.sh (disabled MFL extension case)" tests/context-info.sh } component_test_variable_ssl_in_out_buffer_len () { msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/compat.sh } component_test_variable_ssl_in_out_buffer_len_CID () { msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled" tests/compat.sh } component_test_variable_ssl_in_out_buffer_len_record_splitting () { msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH scripts/config.py set MBEDTLS_SSL_CBC_RECORD_SPLITTING CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled" tests/compat.sh } component_test_ssl_alloc_buffer_and_mfl () { msg "build: default config with memory buffer allocator and MFL extension" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_DEBUG scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" make test msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" tests/ssl-opt.sh -f "Handshake memory usage" } component_test_when_no_ciphersuites_have_mac () { msg "build: when no ciphersuites have MAC" scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER scripts/config.py unset MBEDTLS_ARC4_C scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC make msg "test: !MBEDTLS_SSL_SOME_MODES_USE_MAC" make test msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_MODES_USE_MAC" tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM' } component_test_null_entropy () { msg "build: default config with MBEDTLS_TEST_NULL_ENTROPY (ASan build)" scripts/config.py set MBEDTLS_TEST_NULL_ENTROPY scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES scripts/config.py set MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_ENTROPY_HARDWARE_ALT scripts/config.py unset MBEDTLS_HAVEGE_C CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan -D UNSAFE_BUILD=ON . make msg "test: MBEDTLS_TEST_NULL_ENTROPY - main suites (inc. selftests) (ASan build)" make test } component_test_no_date_time () { msg "build: default config without MBEDTLS_HAVE_TIME_DATE" scripts/config.py unset MBEDTLS_HAVE_TIME_DATE CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check . make msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites" make test } component_test_platform_calloc_macro () { msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO free CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" make test } component_test_malloc_0_null () { msg "build: malloc(0) returns NULL (ASan+UBSan build)" scripts/config.py full make CC=gcc CFLAGS="'-DMBEDTLS_CONFIG_FILE=\"$PWD/tests/configs/config-wrapper-malloc-0-null.h\"' $ASAN_CFLAGS -O" LDFLAGS="$ASAN_CFLAGS" msg "test: malloc(0) returns NULL (ASan+UBSan build)" make test msg "selftest: malloc(0) returns NULL (ASan+UBSan build)" # Just the calloc selftest. "make test" ran the others as part of the # test suites. programs/test/selftest calloc msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)" # Run a subset of the tests. The choice is a balance between coverage # and time (including time indirectly wasted due to flaky tests). # The current choice is to skip tests whose description includes # "proxy", which is an approximation of skipping tests that use the # UDP proxy, which tend to be slower and flakier. tests/ssl-opt.sh -e 'proxy' } component_test_aes_fewer_tables () { msg "build: default config with AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES" make test } component_test_aes_rom_tables () { msg "build: default config with AES_ROM_TABLES enabled" scripts/config.py set MBEDTLS_AES_ROM_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_ROM_TABLES" make test } component_test_aes_fewer_tables_and_rom_tables () { msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES scripts/config.py set MBEDTLS_AES_ROM_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES + AES_ROM_TABLES" make test } component_test_ctr_drbg_aes_256_sha_256 () { msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_512 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_256 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_se_default () { msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C" scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS" msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C" make test } component_test_psa_crypto_drivers () { msg "build: MBEDTLS_PSA_CRYPTO_DRIVERS w/ driver hooks" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS scripts/config.py set MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL" loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" loc_cflags="${loc_cflags} -I../tests/include -O2" make CC=gcc CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS" unset loc_cflags msg "test: full + MBEDTLS_PSA_CRYPTO_DRIVERS" make test } component_test_make_shared () { msg "build/test: make shared" # ~ 40s make SHARED=1 all check ldd programs/util/strerror | grep libmbedcrypto programs/test/dlopen_demo.sh } component_test_cmake_shared () { msg "build/test: cmake shared" # ~ 2min cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On . make ldd programs/util/strerror | grep libmbedcrypto make test programs/test/dlopen_demo.sh } test_build_opt () { info=$1 cc=$2; shift 2 for opt in "$@"; do msg "build/test: $cc $opt, $info" # ~ 30s make CC="$cc" CFLAGS="$opt -std=c99 -pedantic -Wall -Wextra -Werror" # We're confident enough in compilers to not run _all_ the tests, # but at least run the unit tests. In particular, runs with # optimizations use inline assembly whereas runs with -O0 # skip inline assembly. make test # ~30s make clean done } component_test_clang_opt () { scripts/config.py full test_build_opt 'full config' clang -O0 -Os -O2 } component_test_gcc_opt () { scripts/config.py full test_build_opt 'full config' gcc -O0 -Os -O2 } component_build_mbedtls_config_file () { msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s # Use the full config so as to catch a maximum of places where # the check of MBEDTLS_CONFIG_FILE might be missing. scripts/config.py full sed 's!"check_config.h"!"mbedtls/check_config.h"!' <"$CONFIG_H" >full_config.h echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H" make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'" rm -f full_config.h } component_test_m32_o0 () { # Build without optimization, so as to use portable C code (in a 32-bit # build) and not the i386-specific inline assembly. msg "build: i386, make, gcc -O0 (ASan build)" # ~ 30s scripts/config.py full make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O0" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc -O0 (ASan build)" make test } support_test_m32_o0 () { case $(uname -m) in *64*) true;; *) false;; esac } component_test_m32_o2 () { # Build with optimization, to use the i386 specific inline assembly # and go faster for tests. msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s scripts/config.py full make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O2" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc -O2 (ASan build)" make test msg "test ssl-opt.sh, i386, make, gcc-O2" tests/ssl-opt.sh } support_test_m32_o2 () { support_test_m32_o0 "$@" } component_test_m32_everest () { msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_ECDH_LEGACY_CONTEXT scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O2" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARCFOUR\|ARIA\|CAMELLIA\|CHACHA\|DES\|RC4' } support_test_m32_everest () { support_test_m32_o0 "$@" } component_test_mx32 () { msg "build: 64-bit ILP32, make, gcc" # ~ 30s scripts/config.py full make CC=gcc CFLAGS='-Werror -Wall -Wextra -mx32' LDFLAGS='-mx32' msg "test: 64-bit ILP32, make, gcc" make test } support_test_mx32 () { case $(uname -m) in amd64|x86_64) true;; *) false;; esac } component_test_min_mpi_window_size () { msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s make test } component_test_have_int32 () { msg "build: gcc, force 32-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32' msg "test: gcc, force 32-bit bignum limbs" make test } component_test_have_int64 () { msg "build: gcc, force 64-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64' msg "test: gcc, force 64-bit bignum limbs" make test } component_test_no_udbl_division () { msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s make test } component_test_no_64bit_multiplication () { msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s make test } component_test_no_strings () { msg "build: no strings" # ~10s scripts/config.py full # Disable options that activate a large amount of string constants. scripts/config.py unset MBEDTLS_DEBUG_C scripts/config.py unset MBEDTLS_ERROR_C scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY scripts/config.py unset MBEDTLS_VERSION_FEATURES make CFLAGS='-Werror -Os' msg "test: no strings" # ~ 10s make test } component_build_arm_none_eabi_gcc () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1" # ~ 10s scripts/config.py baremetal make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1" ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o } component_build_arm_linux_gnueabi_gcc_arm5vte () { msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte" # ~ 10s scripts/config.py baremetal # Build for a target platform that's close to what Debian uses # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort). # See https://github.com/ARMmbed/mbedtls/pull/2169 and comments. # Build everything including programs, see for example # https://github.com/ARMmbed/mbedtls/pull/3449#issuecomment-675313720 make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1" ${ARM_LINUX_GNUEABI_GCC_PREFIX}size library/*.o } support_build_arm_linux_gnueabi_gcc_arm5vte () { type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1 } component_build_arm_none_eabi_gcc_arm5vte () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte" # ~ 10s scripts/config.py baremetal # This is an imperfect substitute for # component_build_arm_linux_gnueabi_gcc_arm5vte # in case the gcc-arm-linux-gnueabi toolchain is not available make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1" ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o } component_build_arm_none_eabi_gcc_m0plus () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus" # ~ 10s scripts/config.py baremetal make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os" ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o } component_build_arm_none_eabi_gcc_no_udbl_division () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib echo "Checking that software 64-bit division is not required" not grep __aeabi_uldiv library/*.o } component_build_arm_none_eabi_gcc_no_64bit_multiplication () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib echo "Checking that software 64-bit multiplication is not required" not grep __aeabi_lmul library/*.o } component_build_armcc () { msg "build: ARM Compiler 5" scripts/config.py baremetal make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib msg "size: ARM Compiler 5" "$ARMC5_FROMELF" -z library/*.o make clean # ARM Compiler 6 - Target ARMv7-A armc6_build_test "--target=arm-arm-none-eabi -march=armv7-a" # ARM Compiler 6 - Target ARMv7-M armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m" # ARM Compiler 6 - Target ARMv8-A - AArch32 armc6_build_test "--target=arm-arm-none-eabi -march=armv8.2-a" # ARM Compiler 6 - Target ARMv8-M armc6_build_test "--target=arm-arm-none-eabi -march=armv8-m.main" # ARM Compiler 6 - Target ARMv8-A - AArch64 armc6_build_test "--target=aarch64-arm-none-eabi -march=armv8.2-a" } component_build_ssl_hw_record_accel() { msg "build: default config with MBEDTLS_SSL_HW_RECORD_ACCEL enabled" scripts/config.pl set MBEDTLS_SSL_HW_RECORD_ACCEL make CFLAGS='-Werror -O1' } component_test_tls13_experimental () { msg "build: default config with MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL enabled" scripts/config.pl set MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: default config with MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL enabled" make test } component_build_mingw () { msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib programs # note Make tests only builds the tests, but doesn't run them make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror' WINDOWS_BUILD=1 tests make WINDOWS_BUILD=1 clean msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 lib programs make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 tests make WINDOWS_BUILD=1 clean } support_build_mingw() { case $(i686-w64-mingw32-gcc -dumpversion) in [0-5]*) false;; *) true;; esac } component_test_memsan () { msg "build: MSan (clang)" # ~ 1 min 20s scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (MSan)" # ~ 10s make test msg "test: ssl-opt.sh (MSan)" # ~ 1 min tests/ssl-opt.sh # Optional part(s) if [ "$MEMORY" -gt 0 ]; then msg "test: compat.sh (MSan)" # ~ 6 min 20s tests/compat.sh fi } component_test_valgrind () { msg "build: Release (clang)" CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites valgrind (Release)" make memcheck # Optional parts (slow; currently broken on OS X because programs don't # seem to receive signals under valgrind on OS X). if [ "$MEMORY" -gt 0 ]; then msg "test: ssl-opt.sh --memcheck (Release)" tests/ssl-opt.sh --memcheck fi if [ "$MEMORY" -gt 1 ]; then msg "test: compat.sh --memcheck (Release)" tests/compat.sh --memcheck fi if [ "$MEMORY" -gt 0 ]; then msg "test: context-info.sh --memcheck (Release)" tests/context-info.sh --memcheck fi } support_test_cmake_out_of_source () { distrib_id="" distrib_ver="" distrib_ver_minor="" distrib_ver_major="" # Attempt to parse lsb-release to find out distribution and version. If not # found this should fail safe (test is supported). if [[ -f /etc/lsb-release ]]; then while read -r lsb_line; do case "$lsb_line" in "DISTRIB_ID"*) distrib_id=${lsb_line/#DISTRIB_ID=};; "DISTRIB_RELEASE"*) distrib_ver=${lsb_line/#DISTRIB_RELEASE=};; esac done < /etc/lsb-release distrib_ver_major="${distrib_ver%%.*}" distrib_ver="${distrib_ver#*.}" distrib_ver_minor="${distrib_ver%%.*}" fi # Running the out of source CMake test on Ubuntu 16.04 using more than one # processor (as the CI does) can create a race condition whereby the build # fails to see a generated file, despite that file actually having been # generated. This problem appears to go away with 18.04 or newer, so make # the out of source tests unsupported on Ubuntu 16.04. [ "$distrib_id" != "Ubuntu" ] || [ "$distrib_ver_major" -gt 16 ] } component_test_cmake_out_of_source () { msg "build: cmake 'out-of-source' build" MBEDTLS_ROOT_DIR="$PWD" mkdir "$OUT_OF_SOURCE_DIR" cd "$OUT_OF_SOURCE_DIR" cmake -D CMAKE_BUILD_TYPE:String=Check "$MBEDTLS_ROOT_DIR" make msg "test: cmake 'out-of-source' build" make test # Test an SSL option that requires an auxiliary script in test/scripts/. # Also ensure that there are no error messages such as # "No such file or directory", which would indicate that some required # file is missing (ssl-opt.sh tolerates the absence of some files so # may exit with status 0 but emit errors). ./tests/ssl-opt.sh -f 'Fallback SCSV: beginning of list' 2>ssl-opt.err cat ssl-opt.err >&2 # If ssl-opt.err is non-empty, record an error and keep going. [ ! -s ssl-opt.err ] rm ssl-opt.err cd "$MBEDTLS_ROOT_DIR" rm -rf "$OUT_OF_SOURCE_DIR" } component_test_cmake_as_subdirectory () { msg "build: cmake 'as-subdirectory' build" MBEDTLS_ROOT_DIR="$PWD" cd programs/test/cmake_subproject cmake . make ./cmake_subproject cd "$MBEDTLS_ROOT_DIR" unset MBEDTLS_ROOT_DIR } support_test_cmake_as_subdirectory () { support_test_cmake_out_of_source } component_test_zeroize () { # Test that the function mbedtls_platform_zeroize() is not optimized away by # different combinations of compilers and optimization flags by using an # auxiliary GDB script. Unfortunately, GDB does not return error values to the # system in all cases that the script fails, so we must manually search the # output to check whether the pass string is present and no failure strings # were printed. # Don't try to disable ASLR. We don't care about ASLR here. We do care # about a spurious message if Gdb tries and fails, so suppress that. gdb_disable_aslr= if [ -z "$(gdb -batch -nw -ex 'set disable-randomization off' 2>&1)" ]; then gdb_disable_aslr='set disable-randomization off' fi for optimization_flag in -O2 -O3 -Ofast -Os; do for compiler in clang gcc; do msg "test: $compiler $optimization_flag, mbedtls_platform_zeroize()" make programs CC="$compiler" DEBUG=1 CFLAGS="$optimization_flag" gdb -ex "$gdb_disable_aslr" -x tests/scripts/test_zeroize.gdb -nw -batch -nx 2>&1 | tee test_zeroize.log grep "The buffer was correctly zeroized" test_zeroize.log not grep -i "error" test_zeroize.log rm -f test_zeroize.log make clean done done unset gdb_disable_aslr } component_test_psa_compliance () { msg "build: make, default config + CMAC, libmbedcrypto.a only" scripts/config.py set MBEDTLS_CMAC_C make -C library libmbedcrypto.a msg "unit test: test_psa_compliance.py" ./tests/scripts/test_psa_compliance.py } support_test_psa_compliance () { # psa-compliance-tests only supports CMake >= 3.10.0 ver="$(cmake --version)" ver="${ver#cmake version }" ver_major="${ver%%.*}" ver="${ver#*.}" ver_minor="${ver%%.*}" [ "$ver_major" -eq 3 ] && [ "$ver_minor" -ge 10 ] } component_check_python_files () { msg "Lint: Python scripts" tests/scripts/check-python-files.sh } component_check_generate_test_code () { msg "uint test: generate_test_code.py" # unittest writes out mundane stuff like number or tests run on stderr. # Our convention is to reserve stderr for actual errors, and write # harmless info on stdout so it can be suppress with --quiet. ./tests/scripts/test_generate_test_code.py 2>&1 } ################################################################ #### Termination ################################################################ post_report () { msg "Done, cleaning up" final_cleanup final_report } ################################################################ #### Run all the things ################################################################ # Function invoked by --error-test to test error reporting. pseudo_component_error_test () { msg "Testing error reporting $error_test_i" if [ $KEEP_GOING -ne 0 ]; then echo "Expect three failing commands." fi # If the component doesn't run in a subshell, changing error_test_i to an # invalid integer will cause an error in the loop that runs this function. error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell # Expected error: 'grep non_existent /dev/null -> 1' grep non_existent /dev/null # Expected error: '! grep -q . tests/scripts/all.sh -> 1' not grep -q . "$0" # Expected error: 'make unknown_target -> 2' make unknown_target false "this should not be executed" } # Run one component and clean up afterwards. run_component () { current_component="$1" export MBEDTLS_TEST_CONFIGURATION="$current_component" # Unconditionally create a seedfile that's sufficiently long. # Do this before each component, because a previous component may # have messed it up or shortened it. local dd_cmd dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1) case $OSTYPE in linux*|freebsd*|openbsd*|darwin*) dd_cmd+=(status=none) esac "${dd_cmd[@]}" # Run the component in a subshell, with error trapping and output # redirection set up based on the relevant options. if [ $KEEP_GOING -eq 1 ]; then # We want to keep running if the subshell fails, so 'set -e' must # be off when the subshell runs. set +e fi ( if [ $QUIET -eq 1 ]; then # msg() will be silenced, so just print the component name here. echo "${current_component#component_}" exec >/dev/null fi if [ $KEEP_GOING -eq 1 ]; then # Keep "set -e" off, and run an ERR trap instead to record failures. set -E trap err_trap ERR fi # The next line is what runs the component "$@" if [ $KEEP_GOING -eq 1 ]; then trap - ERR exit $last_failure_status fi ) component_status=$? if [ $KEEP_GOING -eq 1 ]; then set -e if [ $component_status -ne 0 ]; then failure_count=$((failure_count + 1)) fi fi # Restore the build tree to a clean state. cleanup unset current_component } # Preliminary setup pre_check_environment pre_initialize_variables pre_parse_command_line "$@" pre_check_git pre_restore_files pre_back_up build_status=0 if [ $KEEP_GOING -eq 1 ]; then pre_setup_keep_going fi pre_prepare_outcome_file pre_print_configuration pre_check_tools cleanup # Run the requested tests. for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do run_component pseudo_component_error_test done unset error_test_i for component in $RUN_COMPONENTS; do run_component "component_$component" done # We're done. post_report