mirror of
https://github.com/yuzu-emu/mbedtls.git
synced 2024-11-26 16:45:41 +01:00
167 lines
9.9 KiB
Makefile
167 lines
9.9 KiB
Makefile
## This file contains a record of how some of the test data was
|
|
## generated. The final build products are committed to the repository
|
|
## as well to make sure that the test data is identical. You do not
|
|
## need to use this makefile unless you're extending mbed TLS's tests.
|
|
|
|
## Many data files were generated prior to the existence of this
|
|
## makefile, so the method of their generation was not recorded.
|
|
|
|
## Note that in addition to depending on the version of the data
|
|
## generation tool, many of the build outputs are randomized, so
|
|
## running this makefile twice would not produce the same results.
|
|
|
|
## Tools
|
|
OPENSSL ?= openssl
|
|
MBEDTLS_CERT_WRITE ?= $(PWD)/../../programs/x509/cert_write
|
|
|
|
## Build the generated test data. Note that since the final outputs
|
|
## are committed to the repository, this target should do nothing on a
|
|
## fresh checkout. Furthermore, since the generation is randomized,
|
|
## re-running the same targets may result in differing files. The goal
|
|
## of this makefile is primarily to serve as a record of how the
|
|
## targets were generated in the first place.
|
|
default: all_final
|
|
|
|
all_intermediate := # temporary files
|
|
all_final := # files used by tests
|
|
|
|
|
|
|
|
################################################################
|
|
#### Generate certificates from existing keys
|
|
################################################################
|
|
|
|
test_ca_crt = test-ca.crt
|
|
test_ca_key_file_rsa = test-ca.key
|
|
test_ca_pwd_rsa = PolarSSLTest
|
|
test_ca_config_file = test-ca.opensslconf
|
|
|
|
test-ca.csr: $(test_ca_key_file_rsa) $(test_ca_config_file)
|
|
$(OPENSSL) req -new -config $(test_ca_config_file) -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@
|
|
all_intermediate += test-ca.csr
|
|
test-ca-sha1.crt: $(test_ca_key_file_rsa) $(test_ca_config_file) test-ca.csr
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha1 -in test-ca.csr -out $@
|
|
all_final += test-ca-sha1.crt
|
|
test-ca-sha256.crt: $(test_ca_key_file_rsa) $(test_ca_config_file) test-ca.csr
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.csr -out $@
|
|
all_final += test-ca-sha256.crt
|
|
|
|
cli_crt_key_file_rsa = cli-rsa.key
|
|
cli_crt_extensions_file = cli.opensslconf
|
|
|
|
cli-rsa.csr: $(cli_crt_key_file_rsa)
|
|
$(OPENSSL) req -new -key $(cli_crt_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -subj "/C=NL/O=PolarSSL/CN=PolarSSL Client 2" -out $@
|
|
all_intermediate += cli-rsa.csr
|
|
cli-rsa-sha1.crt: $(cli_crt_key_file_rsa) test-ca-sha1.crt cli-rsa.csr
|
|
$(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA test-ca-sha1.crt -CAkey $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 4 -days 3653 -sha1 -in cli-rsa.csr -out $@
|
|
all_final += cli-rsa-sha1.crt
|
|
cli-rsa-sha256.crt: $(cli_crt_key_file_rsa) test-ca-sha256.crt cli-rsa.csr
|
|
$(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA test-ca-sha256.crt -CAkey $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 4 -days 3653 -sha256 -in cli-rsa.csr -out $@
|
|
all_final += cli-rsa-sha256.crt
|
|
|
|
server2-rsa.csr: server2.key
|
|
$(OPENSSL) req -new -key server2.key -passin "pass:$(test_ca_pwd_rsa)" -subj "/C=NL/O=PolarSSL/CN=localhost" -out $@
|
|
all_intermediate += server2-rsa.csr
|
|
server2-sha256.crt: server2-rsa.csr
|
|
$(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA test-ca-sha256.crt -CAkey $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 4 -days 3653 -sha256 -in server2-rsa.csr -out $@
|
|
all_final += server2-sha256.crt
|
|
|
|
### Generate certificates for CRT write check tests
|
|
### The test files use the Mbed TLS generated certificates server1*.crt,
|
|
### but for comparison with OpenSSL also rules for OpenSSL-generated
|
|
### certificates server1*.crt.openssl are offered.
|
|
###
|
|
### Known differences:
|
|
### * OpenSSL encodes trailing zero-bits in bit-strings occurring in X.509 extension
|
|
### as unused bits, while Mbed TLS doesn't.
|
|
|
|
test_ca_server1_db = test-ca.server1.db
|
|
test_ca_server1_serial = test-ca.server1.serial
|
|
test_ca_server1_config_file = test-ca.server1.opensslconf
|
|
|
|
server1.csr: server1.key server1_csr.opensslconf
|
|
$(OPENSSL) req -keyform PEM -key server1.key -config server1_csr.opensslconf -out $@ -new
|
|
all_final += server1.csr
|
|
|
|
server1.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 version=3 output_file=$@
|
|
server1.noauthid.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20110212144406 not_after=20210212144406 md=SHA1 authority_identifier=0 version=3 output_file=$@
|
|
server1.der: server1.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.crt server1.noauthid.crt server1.der
|
|
|
|
server1.key_usage.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment version=3 output_file=$@
|
|
server1.key_usage_noauthid.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment authority_identifier=0 version=3 output_file=$@
|
|
server1.key_usage.der: server1.key_usage.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.der
|
|
|
|
server1.cert_type.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 ns_cert_type=ssl_server version=3 output_file=$@
|
|
server1.cert_type_noauthid.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 ns_cert_type=ssl_server authority_identifier=0 version=3 output_file=$@
|
|
server1.cert_type.der: server1.cert_type.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.der
|
|
|
|
server1.v1.crt: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.csr issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20110212144406 not_after=20210212144406 md=SHA1 version=1 output_file=$@
|
|
server1.v1.der: server1.v1.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.v1.crt server1.v1.der
|
|
|
|
# OpenSSL-generated certificates for comparison
|
|
# Also provide certificates to DER format to allow
|
|
# direct binary comparison using e.g. dumpasn1
|
|
server1.crt.openssl server1.key_usage.crt.openssl server1.cert_type.crt.openssl: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file)
|
|
echo "01" > $(test_ca_server1_serial)
|
|
rm -f $(test_ca_server1_db)
|
|
touch $(test_ca_server1_db)
|
|
$(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.csr -extensions v3_ext -extfile $@.v3_ext -out $@
|
|
server1.der.openssl: server1.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
server1.key_usage.der.openssl: server1.key_usage.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
server1.cert_type.der.openssl: server1.cert_type.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
|
|
server1.v1.crt.openssl: server1.key server1.csr $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file)
|
|
echo "01" > $(test_ca_server1_serial)
|
|
rm -f $(test_ca_server1_db)
|
|
touch $(test_ca_server1_db)
|
|
$(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.csr -out $@
|
|
server1.v1.der.openssl: server1.v1.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
|
|
server1_all: server1.csr server1.crt server1.noauthid.crt server1.crt.openssl server1.v1.crt server1.v1.crt.openssl server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.crt.openssl server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.crt.openssl server1.der server1.der.openssl server1.v1.der server1.v1.der.openssl server1.key_usage.der server1.key_usage.der.openssl server1.cert_type.der server1.cert_type.der.openssl
|
|
|
|
################################################################
|
|
#### Meta targets
|
|
################################################################
|
|
|
|
all_final: $(all_final)
|
|
all: $(all_intermediate) $(all_final)
|
|
|
|
.PHONY: default all_final all server1_all
|
|
|
|
# These files should not be committed to the repository.
|
|
list_intermediate:
|
|
@printf '%s\n' $(all_intermediate) | sort
|
|
# These files should be committed to the repository so that the test data is
|
|
# available upon checkout without running a randomized process depending on
|
|
# third-party tools.
|
|
list_final:
|
|
@printf '%s\n' $(all_final) | sort
|
|
.PHONY: list_intermediate list_final
|
|
|
|
## Remove intermediate files
|
|
clean:
|
|
rm -f $(all_intermediate)
|
|
## Remove all build products, even the ones that are committed
|
|
neat: clean
|
|
rm -f $(all_final)
|
|
.PHONY: clean neat
|