yuzu-emu/mbedtls
1
0
Fork 0
mirror of https://github.com/yuzu-emu/mbedtls.git synced 2024-12-02 00:04:17 +01:00
Code Issues Packages Projects Releases Wiki Activity
b3e3d79e1a
mbedtls/include/mbedtls/ctr_drbg.h
Jaeden Amero a15c71374b ctr_drbg: Clarify reseed_counter values before seeding 
Before the initial seeding, reseed_counter used to always be 0. Now, the
value depends on whether or not the user has explicitly set the amount
of data to get from the nonce (via e.g.
mbedtls_ctr_drbg_set_nonce_len()). Add comments to clarify the possible
values reseed_counter can have before the initial seeding.
2020-01-09 13:48:52 +00:00

563 lines
23 KiB
C
Raw Blame History

/**
* \file ctr_drbg.h
*
* \brief This file contains definitions and functions for the
* CTR_DRBG pseudorandom generator.
*
* CTR_DRBG is a standardized way of building a PRNG from a block-cipher
* in counter mode operation, as defined in <em>NIST SP 800-90A:
* Recommendation for Random Number Generation Using Deterministic Random
* Bit Generators</em>.
*
* The Mbed TLS implementation of CTR_DRBG uses AES-256 (default) or AES-128
* (if \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled at compile time)
* as the underlying block cipher, with a derivation function.
*
* The security strength as defined in NIST SP 800-90A is
* 128 bits when AES-128 is used (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY enabled)
* and 256 bits otherwise, provided that #MBEDTLS_CTR_DRBG_ENTROPY_LEN is
* kept at its default value (and not overridden in config.h) and that the
* DRBG instance is set up with default parameters.
* See the documentation of mbedtls_ctr_drbg_seed() for more
* information.
*/
/*
* Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CTR_DRBG_H
#define MBEDTLS_CTR_DRBG_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "mbedtls/aes.h"
#if defined(MBEDTLS_THREADING_C)
#include "mbedtls/threading.h"
#endif
#define MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED -0x0034 /**< The entropy source failed. */
#define MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG -0x0036 /**< The requested random buffer length is too big. */
#define MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG -0x0038 /**< The input (entropy + additional data) is too large. */
#define MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR -0x003A /**< Read or write error in file. */
#define MBEDTLS_CTR_DRBG_BLOCKSIZE 16 /**< The block size used by the cipher. */
#if defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
#define MBEDTLS_CTR_DRBG_KEYSIZE 16
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 16 bytes (128 bits)
* because #MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
*/
#else
#define MBEDTLS_CTR_DRBG_KEYSIZE 32
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 32 bytes (256 bits)
* because \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled.
*/
#endif
#define MBEDTLS_CTR_DRBG_KEYBITS ( MBEDTLS_CTR_DRBG_KEYSIZE * 8 ) /**< The key size for the DRBG operation, in bits. */
#define MBEDTLS_CTR_DRBG_SEEDLEN ( MBEDTLS_CTR_DRBG_KEYSIZE + MBEDTLS_CTR_DRBG_BLOCKSIZE ) /**< The seed length, calculated as (counter + AES key). */
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them using the compiler command
* line.
* \{
*/
/** \def MBEDTLS_CTR_DRBG_ENTROPY_LEN
*
* \brief The amount of entropy used per seed by default, in bytes.
*/
#if !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN)
#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
/** This is 48 bytes because the entropy module uses SHA-512
* (\c MBEDTLS_ENTROPY_FORCE_SHA256 is disabled).
*/
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48
#else /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
/** This is 32 bytes because the entropy module uses SHA-256
* (the SHA512 module is disabled or
* \c MBEDTLS_ENTROPY_FORCE_SHA256 is enabled).
*/
#if !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
/** \warning To achieve a 256-bit security strength, you must pass a nonce
* to mbedtls_ctr_drbg_seed().
*/
#endif /* !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) */
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 32
#endif /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
#endif /* !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) */
#if !defined(MBEDTLS_CTR_DRBG_RESEED_INTERVAL)
#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000
/**< The interval before reseed is performed by default. */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_INPUT 256
/**< The maximum number of additional input Bytes. */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_REQUEST)
#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024
/**< The maximum number of requested Bytes per call. */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_SEED_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384
/**< The maximum size of seed or reseed buffer in bytes. */
#endif
/* \} name SECTION: Module settings */
#define MBEDTLS_CTR_DRBG_PR_OFF 0
/**< Prediction resistance is disabled. */
#define MBEDTLS_CTR_DRBG_PR_ON 1
/**< Prediction resistance is enabled. */
#ifdef __cplusplus
extern "C" {
#endif
#if MBEDTLS_CTR_DRBG_ENTROPY_LEN >= MBEDTLS_CTR_DRBG_KEYSIZE * 3 / 2
/** The default length of the nonce read from the entropy source.
*
* This is \c 0 because a single read from the entropy source is sufficient
* to include a nonce.
* See the documentation of mbedtls_ctr_drbg_seed() for more information.
*/
#define MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN 0
#else
/** The default length of the nonce read from the entropy source.
*
* This is half of the default entropy length because a single read from
* the entropy source does not provide enough material to form a nonce.
* See the documentation of mbedtls_ctr_drbg_seed() for more information.
*/
#define MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN ( MBEDTLS_CTR_DRBG_ENTROPY_LEN + 1 ) / 2
#endif
/**
* \brief The CTR_DRBG context structure.
*/
typedef struct mbedtls_ctr_drbg_context
{
unsigned char counter[16]; /*!< The counter (V). */
int reseed_counter; /*!< The reseed counter.
* This is the number of requests that have
* been made since the last (re)seeding,
* minus one.
* Before the initial seeding, this field
* contains the amount of entropy in bytes
* to use as a nonce for the initial seeding,
* or -1 if no nonce length has been explicitly
* set (see mbedtls_ctr_drbg_set_nonce_len()).
*/
int prediction_resistance; /*!< This determines whether prediction
resistance is enabled, that is
whether to systematically reseed before
each random generation. */
size_t entropy_len; /*!< The amount of entropy grabbed on each
seed or reseed operation, in bytes. */
int reseed_interval; /*!< The reseed interval.
* This is the maximum number of requests
* that can be made between reseedings. */
mbedtls_aes_context aes_ctx; /*!< The AES context. */
/*
* Callbacks (Entropy)
*/
int (*f_entropy)(void *, unsigned char *, size_t);
/*!< The entropy callback function. */
void *p_entropy; /*!< The context for the entropy function. */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex;
#endif
}
mbedtls_ctr_drbg_context;
/**
* \brief This function initializes the CTR_DRBG context,
* and prepares it for mbedtls_ctr_drbg_seed()
* or mbedtls_ctr_drbg_free().
*
* \param ctx The CTR_DRBG context to initialize.
*/
void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx );
/**
* \brief This function seeds and sets up the CTR_DRBG
* entropy source for future reseeds.
*
* A typical choice for the \p f_entropy and \p p_entropy parameters is
* to use the entropy module:
* - \p f_entropy is mbedtls_entropy_func();
* - \p p_entropy is an instance of ::mbedtls_entropy_context initialized
* with mbedtls_entropy_init() (which registers the platform's default
* entropy sources).
*
* The entropy length is #MBEDTLS_CTR_DRBG_ENTROPY_LEN by default.
* You can override it by calling mbedtls_ctr_drbg_set_entropy_len().
*
* The entropy nonce length is:
* - \c 0 if the entropy length is at least 3/2 times the entropy length,
* which guarantees that the security strength is the maximum permitted
* by the key size and entropy length according to NIST SP 800-90A §10.2.1;
* - Half the entropy length otherwise.
* You can override it by calling mbedtls_ctr_drbg_set_nonce_len().
* With the default entropy length, the entropy nonce length is
* #MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN.
*
* You can provide a nonce and personalization string in addition to the
* entropy source, to make this instantiation as unique as possible.
* See SP 800-90A §8.6.7 for more details about nonces.
*
* The _seed_material_ value passed to the derivation function in
* the CTR_DRBG Instantiate Process described in NIST SP 800-90A §10.2.1.3.2
* is the concatenation of the following strings:
* - A string obtained by calling \p f_entropy function for the entropy
* length.
*/
#if MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN == 0
/**
* - If mbedtls_ctr_drbg_set_nonce_len() has been called, a string
* obtained by calling \p f_entropy function for the specified length.
*/
#else
/**
* - A string obtained by calling \p f_entropy function for the entropy nonce
* length. If the entropy nonce length is \c 0, this function does not
* make a second call to \p f_entropy.
*/
#endif
/**
* - The \p custom string.
*
* \note To achieve the nominal security strength permitted
* by CTR_DRBG, the entropy length must be:
* - at least 16 bytes for a 128-bit strength
* (maximum achievable strength when using AES-128);
* - at least 32 bytes for a 256-bit strength
* (maximum achievable strength when using AES-256).
*
* In addition, if you do not pass a nonce in \p custom,
* the sum of the entropy length
* and the entropy nonce length must be:
* - at least 24 bytes for a 128-bit strength
* (maximum achievable strength when using AES-128);
* - at least 48 bytes for a 256-bit strength
* (maximum achievable strength when using AES-256).
*
* \param ctx The CTR_DRBG context to seed.
* It must have been initialized with
* mbedtls_ctr_drbg_init().
* After a successful call to mbedtls_ctr_drbg_seed(),
* you may not call mbedtls_ctr_drbg_seed() again on
* the same context unless you call
* mbedtls_ctr_drbg_free() and mbedtls_ctr_drbg_init()
* again first.
* \param f_entropy The entropy callback, taking as arguments the
* \p p_entropy context, the buffer to fill, and the
* length of the buffer.
* \p f_entropy is always called with a buffer size
* less than or equal to the entropy length.
* \param p_entropy The entropy context to pass to \p f_entropy.
* \param custom The personalization string.
* This can be \c NULL, in which case the personalization
* string is empty regardless of the value of \p len.
* \param len The length of the personalization string.
* This must be at most
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT
* - #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
*/
int mbedtls_ctr_drbg_seed( mbedtls_ctr_drbg_context *ctx,
int (*f_entropy)(void *, unsigned char *, size_t),
void *p_entropy,
const unsigned char *custom,
size_t len );
/**
* \brief This function clears CTR_CRBG context data.
*
* \param ctx The CTR_DRBG context to clear.
*/
void mbedtls_ctr_drbg_free( mbedtls_ctr_drbg_context *ctx );
/**
* \brief This function turns prediction resistance on or off.
* The default value is off.
*
* \note If enabled, entropy is gathered at the beginning of
* every call to mbedtls_ctr_drbg_random_with_add()
* or mbedtls_ctr_drbg_random().
* Only use this if your entropy source has sufficient
* throughput.
*
* \param ctx The CTR_DRBG context.
* \param resistance #MBEDTLS_CTR_DRBG_PR_ON or #MBEDTLS_CTR_DRBG_PR_OFF.
*/
void mbedtls_ctr_drbg_set_prediction_resistance( mbedtls_ctr_drbg_context *ctx,
int resistance );
/**
* \brief This function sets the amount of entropy grabbed on each
* seed or reseed.
*
* The default value is #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \note The security strength of CTR_DRBG is bounded by the
* entropy length. Thus:
* - When using AES-256
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled,
* which is the default),
* \p len must be at least 32 (in bytes)
* to achieve a 256-bit strength.
* - When using AES-128
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled)
* \p len must be at least 16 (in bytes)
* to achieve a 128-bit strength.
*
* \param ctx The CTR_DRBG context.
* \param len The amount of entropy to grab, in bytes.
* This must be at most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT
* and at most the maximum length accepted by the
* entropy function that is set in the context.
*/
void mbedtls_ctr_drbg_set_entropy_len( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief This function sets the amount of entropy grabbed
* as a nonce for the initial seeding.
*
* Call this function before calling mbedtls_ctr_drbg_seed() to read
* a nonce from the entropy source during the initial seeding.
*
* \param ctx The CTR_DRBG context.
* \param len The amount of entropy to grab for the nonce, in bytes.
* This must be at most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT
* and at most the maximum length accepted by the
* entropy function that is set in the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if \p len is
* more than #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED
* if the initial seeding has already taken place.
*/
int mbedtls_ctr_drbg_set_nonce_len( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief This function sets the reseed interval.
*
* The reseed interval is the number of calls to mbedtls_ctr_drbg_random()
* or mbedtls_ctr_drbg_random_with_add() after which the entropy function
* is called again.
*
* The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
*
* \param ctx The CTR_DRBG context.
* \param interval The reseed interval.
*/
void mbedtls_ctr_drbg_set_reseed_interval( mbedtls_ctr_drbg_context *ctx,
int interval );
/**
* \brief This function reseeds the CTR_DRBG context, that is
* extracts data from the entropy source.
*
* \param ctx The CTR_DRBG context.
* \param additional Additional data to add to the state. Can be \c NULL.
* \param len The length of the additional data.
* This must be less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
*/
int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional, size_t len );
/**
* \brief This function updates the state of the CTR_DRBG context.
*
* \param ctx The CTR_DRBG context.
* \param additional The data to update the state with. This must not be
* \c NULL unless \p add_len is \c 0.
* \param add_len Length of \p additional in bytes. This must be at
* most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if
* \p add_len is more than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
* \return An error from the underlying AES cipher on failure.
*/
int mbedtls_ctr_drbg_update_ret( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional,
size_t add_len );
/**
* \brief This function updates a CTR_DRBG instance with additional
* data and uses it to generate random data.
*
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer in bytes.
* \param additional Additional data to update. Can be \c NULL, in which
* case the additional data is empty regardless of
* the value of \p add_len.
* \param add_len The length of the additional data
* if \p additional is not \c NULL.
* This must be less than #MBEDTLS_CTR_DRBG_MAX_INPUT
* and less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
* #MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG on failure.
*/
int mbedtls_ctr_drbg_random_with_add( void *p_rng,
unsigned char *output, size_t output_len,
const unsigned char *additional, size_t add_len );
/**
* \brief This function uses CTR_DRBG to generate random data.
*
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
*
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer in bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
* #MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG on failure.
*/
int mbedtls_ctr_drbg_random( void *p_rng,
unsigned char *output, size_t output_len );
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function updates the state of the CTR_DRBG context.
*
* \deprecated Superseded by mbedtls_ctr_drbg_update_ret()
* in 2.16.0.
*
* \note If \p add_len is greater than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT, only the first
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT Bytes are used.
* The remaining Bytes are silently discarded.
*
* \param ctx The CTR_DRBG context.
* \param additional The data to update the state with.
* \param add_len Length of \p additional data.
*/
MBEDTLS_DEPRECATED void mbedtls_ctr_drbg_update(
mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional,
size_t add_len );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_FS_IO)
/**
* \brief This function writes a seed file.
*
* \param ctx The CTR_DRBG context.
* \param path The name of the file.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on reseed
* failure.
*/
int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
/**
* \brief This function reads and updates a seed file. The seed
* is added to this instance.
*
* \param ctx The CTR_DRBG context.
* \param path The name of the file.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on
* reseed failure.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if the existing
* seed file is too large.
*/
int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The CTR_DRBG checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_ctr_drbg_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
#endif /* ctr_drbg.h */
Reference in New Issue View Git Blame Copy Permalink