yuzu-emu/mbedtls
1
0
Fork 0
mirror of https://github.com/yuzu-emu/mbedtls.git synced 2024-11-23 08:35:43 +01:00
Code Issues Packages Projects Releases Wiki Activity
c9914ecd01
mbedtls/tests/scripts/all.sh
Manuel Pégourié-Gonnard 805b1461b8 all.sh: clean up some uses of "local" variables 
While pure sh doesn't have a concept of local variables, we can partially
emulate them by unsetting variables before we exit the function, and use the
convention of giving them lowercase names to distinguish from global
variables.

Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
2020-06-23 11:42:59 +02:00

1656 lines
56 KiB
Bash
Executable File
Raw Blame History

#! /usr/bin/env sh
# all.sh
#
# Copyright (c) 2014-2017, ARM Limited, All Rights Reserved
# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
#
# This file is provided under the Apache License 2.0, or the
# GNU General Public License v2.0 or later.
#
# **********
# Apache License 2.0:
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# **********
#
# **********
# GNU General Public License v2.0 or later:
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# **********
#
# This file is part of Mbed TLS (https://tls.mbed.org)
################################################################
#### Documentation
################################################################
# Purpose
# -------
#
# To run all tests possible or available on the platform.
#
# Notes for users
# ---------------
#
# Warning: the test is destructive. It includes various build modes and
# configurations, and can and will arbitrarily change the current CMake
# configuration. The following files must be committed into git:
# * include/mbedtls/config.h
# * Makefile, library/Makefile, programs/Makefile, tests/Makefile
# After running this script, the CMake cache will be lost and CMake
# will no longer be initialised.
#
# The script assumes the presence of a number of tools:
# * Basic Unix tools (Windows users note: a Unix-style find must be before
# the Windows find in the PATH)
# * Perl
# * GNU Make
# * CMake
# * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
# * G++
# * arm-gcc and mingw-gcc
# * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc
# * OpenSSL and GnuTLS command line tools, recent enough for the
# interoperability tests. If they don't support SSLv3 then a legacy
# version of these tools must be present as well (search for LEGACY
# below).
# See the invocation of check_tools below for details.
#
# This script must be invoked from the toplevel directory of a git
# working copy of Mbed TLS.
#
# Note that the output is not saved. You may want to run
# script -c tests/scripts/all.sh
# or
# tests/scripts/all.sh >all.log 2>&1
#
# Notes for maintainers
# ---------------------
#
# The bulk of the code is organized into functions that follow one of the
# following naming conventions:
# * pre_XXX: things to do before running the tests, in order.
# * component_XXX: independent components. They can be run in any order.
# * component_check_XXX: quick tests that aren't worth parallelizing.
# * component_build_XXX: build things but don't run them.
# * component_test_XXX: build and test.
# * support_XXX: if support_XXX exists and returns false then
# component_XXX is not run by default.
# * post_XXX: things to do after running the tests.
# * other: miscellaneous support functions.
#
# Each component must start by invoking `msg` with a short informative message.
#
# The framework performs some cleanup tasks after each component. This
# means that components can assume that the working directory is in a
# cleaned-up state, and don't need to perform the cleanup themselves.
# * Run `make clean`.
# * Restore `include/mbedtks/config.h` from a backup made before running
# the component.
# * Check out `Makefile`, `library/Makefile`, `programs/Makefile` and
# `tests/Makefile` from git. This cleans up after an in-tree use of
# CMake.
#
# Any command that is expected to fail must be protected so that the
# script keeps running in --keep-going mode despite `set -e`. In keep-going
# mode, if a protected command fails, this is logged as a failure and the
# script will exit with a failure status once it has run all components.
# Commands can be protected in any of the following ways:
# * `make` is a function which runs the `make` command with protection.
# Note that you must write `make VAR=value`, not `VAR=value make`,
# because the `VAR=value make` syntax doesn't work with functions.
# * Put `report_status` before the command to protect it.
# * Put `if_build_successful` before a command. This protects it, and
# additionally skips it if a prior invocation of `make` in the same
# component failed.
#
# The tests are roughly in order from fastest to slowest. This doesn't
# have to be exact, but in general you should add slower tests towards
# the end and fast checks near the beginning.
################################################################
#### Initialization and command line parsing
################################################################
# Abort on errors (and uninitialised variables)
set -eu
pre_check_environment () {
if [ -d library -a -d include -a -d tests ]; then :; else
echo "Must be run from mbed TLS root" >&2
exit 1
fi
}
pre_initialize_variables () {
CONFIG_H='include/mbedtls/config.h'
CONFIG_BAK="$CONFIG_H.bak"
MEMORY=0
FORCE=0
QUIET=0
KEEP_GOING=0
# Seed value used with the --release-test option.
#
# See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
# both values are kept in sync. If you change the value here because it
# breaks some tests, you'll definitely want to change it in
# basic-build-test.sh as well.
RELEASE_SEED=1
# Default commands, can be overridden by the environment
: ${OPENSSL:="openssl"}
: ${OPENSSL_LEGACY:="$OPENSSL"}
: ${OPENSSL_NEXT:="$OPENSSL"}
: ${GNUTLS_CLI:="gnutls-cli"}
: ${GNUTLS_SERV:="gnutls-serv"}
: ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"}
: ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"}
: ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
: ${ARMC5_BIN_DIR:=/usr/bin}
: ${ARMC6_BIN_DIR:=/usr/bin}
: ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
# if MAKEFLAGS is not set add the -j option to speed up invocations of make
if [ -z "${MAKEFLAGS+set}" ]; then
export MAKEFLAGS="-j"
fi
# CFLAGS and LDFLAGS for Asan builds that don't use CMake
ASAN_CFLAGS='-Werror -Wall -Wextra -fsanitize=address,undefined -fno-sanitize-recover=all'
# Gather the list of available components. These are the functions
# defined in this script whose name starts with "component_".
# Parse the script with sed, because in sh there is no way to list
# defined functions.
ALL_COMPONENTS=$(sed -n 's/^ *component_\([0-9A-Z_a-z]*\) *().*/\1/p' <"$0")
# Exclude components that are not supported on this platform.
SUPPORTED_COMPONENTS=
for component in $ALL_COMPONENTS; do
case $(type "support_$component" 2>&1) in
*' function'*)
if ! support_$component; then continue; fi;;
esac
SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
done
}
# Test whether the component $1 is included in the command line patterns.
is_component_included()
{
set -f
for pattern in $COMMAND_LINE_COMPONENTS; do
set +f
case ${1#component_} in $pattern) return 0;; esac
done
set +f
return 1
}
usage()
{
cat <<EOF
Usage: $0 [OPTION]... [COMPONENT]...
Run mbedtls release validation tests.
By default, run all tests. With one or more COMPONENT, run only those.
COMPONENT can be the name of a component or a shell wildcard pattern.
Examples:
$0 "check_*"
Run all sanity checks.
$0 --no-armcc --except test_memsan
Run everything except builds that require armcc and MemSan.
Special options:
-h|--help Print this help and exit.
--list-all-components List all available test components and exit.
--list-components List components supported on this platform and exit.
General options:
-q|--quiet Only output component names, and errors if any.
-f|--force Force the tests to overwrite any modified files.
-k|--keep-going Run all tests and report errors at the end.
-m|--memory Additional optional memory tests.
--arm-none-eabi-gcc-prefix=<string>
Prefix for a cross-compiler for arm-none-eabi
(default: "${ARM_NONE_EABI_GCC_PREFIX}")
--armcc Run ARM Compiler builds (on by default).
--except Exclude the COMPONENTs listed on the command line,
instead of running only those.
--no-armcc Skip ARM Compiler builds.
--no-force Refuse to overwrite modified files (default).
--no-keep-going Stop at the first error (default).
--no-memory No additional memory tests (default).
--no-quiet Print full ouput from components.
--out-of-source-dir=<path> Directory used for CMake out-of-source build tests.
--random-seed Use a random seed value for randomized tests (default).
-r|--release-test Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
-s|--seed Integer seed value to use for this test run.
Tool path options:
--armc5-bin-dir=<ARMC5_bin_dir_path> ARM Compiler 5 bin directory.
--armc6-bin-dir=<ARMC6_bin_dir_path> ARM Compiler 6 bin directory.
--gnutls-cli=<GnuTLS_cli_path> GnuTLS client executable to use for most tests.
--gnutls-serv=<GnuTLS_serv_path> GnuTLS server executable to use for most tests.
--gnutls-legacy-cli=<GnuTLS_cli_path> GnuTLS client executable to use for legacy tests.
--gnutls-legacy-serv=<GnuTLS_serv_path> GnuTLS server executable to use for legacy tests.
--openssl=<OpenSSL_path> OpenSSL executable to use for most tests.
--openssl-legacy=<OpenSSL_path> OpenSSL executable to use for legacy tests e.g. SSLv3.
--openssl-next=<OpenSSL_path> OpenSSL executable to use for recent things like ARIA
EOF
}
# remove built files as well as the cmake cache/config
cleanup()
{
if [ -n "${MBEDTLS_ROOT_DIR+set}" ]; then
cd "$MBEDTLS_ROOT_DIR"
fi
command make clean
# Remove CMake artefacts
find . -name .git -prune \
-iname CMakeFiles -exec rm -rf {} \+ -o \
\( -iname cmake_install.cmake -o \
-iname CTestTestfile.cmake -o \
-iname CMakeCache.txt \) -exec rm {} \+
# Recover files overwritten by in-tree CMake builds
rm -f include/Makefile include/mbedtls/Makefile programs/*/Makefile
git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile
git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile
if [ -f "$CONFIG_BAK" ]; then
mv "$CONFIG_BAK" "$CONFIG_H"
fi
}
# Executed on exit. May be redefined depending on command line options.
final_report () {
:
}
fatal_signal () {
cleanup
final_report $1
trap - $1
kill -$1 $$
}
trap 'fatal_signal HUP' HUP
trap 'fatal_signal INT' INT
trap 'fatal_signal TERM' TERM
msg()
{
if [ -n "${current_component:-}" ]; then
current_section="${current_component#component_}: $1"
else
current_section="$1"
fi
if [ $QUIET -eq 1 ]; then
return
fi
echo ""
echo "******************************************************************"
echo "* $current_section "
printf "* "; date
echo "******************************************************************"
}
armc6_build_test()
{
FLAGS="$1"
msg "build: ARM Compiler 6 ($FLAGS)"
ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
WARNING_CFLAGS='-xc -std=c99' make lib
msg "size: ARM Compiler 6 ($FLAGS)"
"$ARMC6_FROMELF" -z library/*.o
make clean
}
err_msg()
{
echo "$1" >&2
}
check_tools()
{
for TOOL in "$@"; do
if ! `type "$TOOL" >/dev/null 2>&1`; then
err_msg "$TOOL not found!"
exit 1
fi
done
}
check_headers_in_cpp () {
ls include/mbedtls | grep "\.h$" >headers.txt
<programs/test/cpp_dummy_build.cpp sed -n 's/"$//; s!^#include "mbedtls/!!p' |
sort |
diff headers.txt -
rm headers.txt
}
pre_parse_command_line () {
COMMAND_LINE_COMPONENTS=
all_except=0
no_armcc=
while [ $# -gt 0 ]; do
case "$1" in
--arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
--armcc) no_armcc=;;
--armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";;
--armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
--except) all_except=1;;
--force|-f) FORCE=1;;
--gnutls-cli) shift; GNUTLS_CLI="$1";;
--gnutls-legacy-cli) shift; GNUTLS_LEGACY_CLI="$1";;
--gnutls-legacy-serv) shift; GNUTLS_LEGACY_SERV="$1";;
--gnutls-serv) shift; GNUTLS_SERV="$1";;
--help|-h) usage; exit;;
--keep-going|-k) KEEP_GOING=1;;
--list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
--list-components) printf '%s\n' $SUPPORTED_COMPONENTS; exit;;
--memory|-m) MEMORY=1;;
--no-armcc) no_armcc=1;;
--no-force) FORCE=0;;
--no-keep-going) KEEP_GOING=0;;
--no-memory) MEMORY=0;;
--no-quiet) QUIET=0;;
--openssl) shift; OPENSSL="$1";;
--openssl-legacy) shift; OPENSSL_LEGACY="$1";;
--openssl-next) shift; OPENSSL_NEXT="$1";;
--out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
--quiet|-q) QUIET=1;;
--random-seed) unset SEED;;
--release-test|-r) SEED=$RELEASE_SEED;;
--seed|-s) shift; SEED="$1";;
-*)
echo >&2 "Unknown option: $1"
echo >&2 "Run $0 --help for usage."
exit 120
;;
*) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
esac
shift
done
# With no list of components, run everything.
if [ -z "$COMMAND_LINE_COMPONENTS" ]; then
all_except=1
fi
# --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
# Ignore it if components are listed explicitly on the command line.
if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
fi
# Build the list of components to run.
RUN_COMPONENTS=
for component in $SUPPORTED_COMPONENTS; do
if is_component_included "$component"; [ $? -eq $all_except ]; then
RUN_COMPONENTS="$RUN_COMPONENTS $component"
fi
done
unset all_except
unset no_armcc
}
pre_check_git () {
if [ $FORCE -eq 1 ]; then
rm -rf "$OUT_OF_SOURCE_DIR"
git checkout-index -f -q $CONFIG_H
cleanup
else
if [ -d "$OUT_OF_SOURCE_DIR" ]; then
echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
echo "You can either delete this directory manually, or force the test by rerunning"
echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
exit 1
fi
if ! git diff --quiet include/mbedtls/config.h; then
err_msg "Warning - the configuration file 'include/mbedtls/config.h' has been edited. "
echo "You can either delete or preserve your work, or force the test by rerunning the"
echo "script as: $0 --force"
exit 1
fi
fi
}
pre_setup_keep_going () {
failure_summary=
failure_count=0
start_red=
end_color=
if [ -t 1 ]; then
case "${TERM:-}" in
*color*|cygwin|linux|rxvt*|screen|[Eex]term*)
start_red=$(printf '\033[31m')
end_color=$(printf '\033[0m')
;;
esac
fi
record_status () {
if "$@"; then
last_status=0
else
last_status=$?
text="$current_section: $* -> $last_status"
failure_summary="$failure_summary
$text"
failure_count=$((failure_count + 1))
echo "${start_red}^^^^$text^^^^${end_color}" >&2
fi
}
make () {
case "$*" in
*test|*check)
if [ $build_status -eq 0 ]; then
record_status command make "$@"
else
echo "(skipped because the build failed)"
fi
;;
*)
record_status command make "$@"
build_status=$last_status
;;
esac
}
final_report () {
if [ $failure_count -gt 0 ]; then
echo
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo "${start_red}FAILED: $failure_count${end_color}$failure_summary"
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
exit 1
elif [ -z "${1-}" ]; then
echo "SUCCESS :)"
fi
if [ -n "${1-}" ]; then
echo "Killed by SIG$1."
fi
}
}
if_build_succeeded () {
if [ $build_status -eq 0 ]; then
record_status "$@"
fi
}
# to be used instead of ! for commands run with
# record_status or if_build_succeeded
not() {
! "$@"
}
pre_setup_quiet_redirect () {
if [ $QUIET -ne 1 ]; then
redirect_out () {
"$@"
}
else
redirect_out () {
"$@" >/dev/null
}
fi
}
pre_print_configuration () {
if [ $QUIET -eq 1 ]; then
return
fi
msg "info: $0 configuration"
echo "MEMORY: $MEMORY"
echo "FORCE: $FORCE"
echo "SEED: ${SEED-"UNSET"}"
echo "OPENSSL: $OPENSSL"
echo "OPENSSL_LEGACY: $OPENSSL_LEGACY"
echo "OPENSSL_NEXT: $OPENSSL_NEXT"
echo "GNUTLS_CLI: $GNUTLS_CLI"
echo "GNUTLS_SERV: $GNUTLS_SERV"
echo "GNUTLS_LEGACY_CLI: $GNUTLS_LEGACY_CLI"
echo "GNUTLS_LEGACY_SERV: $GNUTLS_LEGACY_SERV"
echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR"
echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
}
# Make sure the tools we need are available.
pre_check_tools () {
# Build the list of variables to pass to output_env.sh.
set env
case " $RUN_COMPONENTS " in
# Require OpenSSL and GnuTLS if running any tests (as opposed to
# only doing builds). Not all tests run OpenSSL and GnuTLS, but this
# is a good enough approximation in practice.
*" test_"*)
# To avoid setting OpenSSL and GnuTLS for each call to compat.sh
# and ssl-opt.sh, we just export the variables they require.
export OPENSSL_CMD="$OPENSSL"
export GNUTLS_CLI="$GNUTLS_CLI"
export GNUTLS_SERV="$GNUTLS_SERV"
# Avoid passing --seed flag in every call to ssl-opt.sh
if [ -n "${SEED-}" ]; then
export SEED
fi
set "$@" OPENSSL="$OPENSSL" OPENSSL_LEGACY="$OPENSSL_LEGACY"
set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
set "$@" GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI"
set "$@" GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV"
check_tools "$OPENSSL" "$OPENSSL_LEGACY" "$OPENSSL_NEXT" \
"$GNUTLS_CLI" "$GNUTLS_SERV" \
"$GNUTLS_LEGACY_CLI" "$GNUTLS_LEGACY_SERV"
;;
esac
case " $RUN_COMPONENTS " in
*_doxygen[_\ ]*) check_tools "doxygen" "dot";;
esac
case " $RUN_COMPONENTS " in
*_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
esac
case " $RUN_COMPONENTS " in
*_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
esac
case " $RUN_COMPONENTS " in
*" test_zeroize "*) check_tools "gdb";;
esac
case " $RUN_COMPONENTS " in
*_armcc*)
ARMC5_CC="$ARMC5_BIN_DIR/armcc"
ARMC5_AR="$ARMC5_BIN_DIR/armar"
ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf"
ARMC6_CC="$ARMC6_BIN_DIR/armclang"
ARMC6_AR="$ARMC6_BIN_DIR/armar"
ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \
"$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
esac
# past this point, no call to check_tool, only printing output
if [ $QUIET -eq 1 ]; then
return
fi
msg "info: output_env.sh"
case $RUN_COMPONENTS in
*_armcc*)
set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
*) set "$@" RUN_ARMCC=0;;
esac
"$@" scripts/output_env.sh
}
################################################################
#### Basic checks
################################################################
#
# Test Suites to be executed
#
# The test ordering tries to optimize for the following criteria:
# 1. Catch possible problems early, by running first tests that run quickly
# and/or are more likely to fail than others (eg I use Clang most of the
# time, so start with a GCC build).
# 2. Minimize total running time, by avoiding useless rebuilds
#
# Indicative running times are given for reference.
component_check_recursion () {
msg "test: recursion.pl" # < 1s
record_status tests/scripts/recursion.pl library/*.c
}
component_check_generated_files () {
msg "test: freshness of generated source files" # < 1s
record_status tests/scripts/check-generated-files.sh
}
component_check_doxy_blocks () {
msg "test: doxygen markup outside doxygen blocks" # < 1s
record_status tests/scripts/check-doxy-blocks.pl
}
component_check_files () {
msg "test: check-files.py" # < 1s
record_status tests/scripts/check-files.py
}
component_check_changelog () {
msg "Check: changelog entries" # < 1s
rm -f ChangeLog.new
record_status scripts/assemble_changelog.py -o ChangeLog.new
if [ -e ChangeLog.new ]; then
# Show the diff for information. It isn't an error if the diff is
# non-empty.
diff -u ChangeLog ChangeLog.new || true
rm ChangeLog.new
fi
}
component_check_names () {
msg "test/build: declared and exported names" # < 3s
record_status tests/scripts/check-names.sh -v
}
component_check_doxygen_warnings () {
msg "test: doxygen warnings" # ~ 3s
record_status tests/scripts/doxygen.sh
}
################################################################
#### Build and test many configurations and targets
################################################################
component_test_large_ecdsa_key_signature () {
SMALL_MPI_MAX_SIZE=136 # Small enough to interfere with the EC signatures
msg "build: cmake + MBEDTLS_MPI_MAX_SIZE=${SMALL_MPI_MAX_SIZE}, gcc, ASan" # ~ 1 min 50s
scripts/config.pl set MBEDTLS_MPI_MAX_SIZE $SMALL_MPI_MAX_SIZE
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
INEVITABLY_PRESENT_FILE=Makefile
SIGNATURE_FILE="${INEVITABLY_PRESENT_FILE}.sig" # Warning, this is rm -f'ed below
msg "test: pk_sign secp521r1_prv.der for MBEDTLS_MPI_MAX_SIZE=${SMALL_MPI_MAX_SIZE} (ASan build)" # ~ 5s
if_build_succeeded programs/pkey/pk_sign tests/data_files/secp521r1_prv.der $INEVITABLY_PRESENT_FILE
rm -f $SIGNATURE_FILE
}
component_test_default_out_of_box () {
msg "build: make, default config (out-of-box)" # ~1min
make
msg "test: main suites make, default config (out-of-box)" # ~10s
make test
msg "selftest: make, default config (out-of-box)" # ~10s
if_build_succeeded programs/test/selftest
}
component_test_default_cmake_gcc_asan () {
msg "build: cmake, gcc, ASan" # ~ 1 min 50s
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: selftest (ASan build)" # ~ 10s
if_build_succeeded programs/test/selftest
msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
if_build_succeeded tests/ssl-opt.sh
msg "test: compat.sh (ASan build)" # ~ 6 min
if_build_succeeded tests/compat.sh
}
component_test_full_cmake_gcc_asan () {
msg "build: full config, cmake, gcc, ASan"
scripts/config.pl full
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (full config, ASan build)"
make test
msg "test: selftest (ASan build)" # ~ 10s
if_build_succeeded programs/test/selftest
msg "test: ssl-opt.sh (full config, ASan build)"
if_build_succeeded tests/ssl-opt.sh
msg "test: compat.sh (full config, ASan build)"
if_build_succeeded tests/compat.sh
}
component_test_zlib_make() {
msg "build: zlib enabled, make"
scripts/config.pl set MBEDTLS_ZLIB_SUPPORT
make ZLIB=1 CFLAGS='-Werror -O1'
msg "test: main suites (zlib, make)"
make test
msg "test: ssl-opt.sh (zlib, make)"
if_build_succeeded tests/ssl-opt.sh
}
support_test_zlib_make () {
base=support_test_zlib_$$
cat <<'EOF' > ${base}.c
#include "zlib.h"
int main(void) { return 0; }
EOF
gcc -o ${base}.exe ${base}.c -lz 2>/dev/null
ret=$?
rm -f ${base}.*
return $ret
}
component_test_zlib_cmake() {
msg "build: zlib enabled, cmake"
scripts/config.pl set MBEDTLS_ZLIB_SUPPORT
cmake -D ENABLE_ZLIB_SUPPORT=On -D CMAKE_BUILD_TYPE:String=Check .
make
msg "test: main suites (zlib, cmake)"
make test
msg "test: ssl-opt.sh (zlib, cmake)"
if_build_succeeded tests/ssl-opt.sh
}
support_test_zlib_cmake () {
support_test_zlib_make "$@"
}
component_test_ref_configs () {
msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
record_status tests/scripts/test-ref-configs.pl
}
component_test_sslv3 () {
msg "build: Default + SSLv3 (ASan build)" # ~ 6 min
scripts/config.pl set MBEDTLS_SSL_PROTO_SSL3
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: SSLv3 - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "build: SSLv3 - compat.sh (ASan build)" # ~ 6 min
if_build_succeeded tests/compat.sh -m 'tls1 tls1_1 tls1_2 dtls1 dtls1_2'
if_build_succeeded env OPENSSL_CMD="$OPENSSL_LEGACY" tests/compat.sh -m 'ssl3'
msg "build: SSLv3 - ssl-opt.sh (ASan build)" # ~ 6 min
if_build_succeeded tests/ssl-opt.sh
}
component_test_no_renegotiation () {
msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
scripts/config.pl unset MBEDTLS_SSL_RENEGOTIATION
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
if_build_succeeded tests/ssl-opt.sh
}
component_test_no_pem_no_fs () {
msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)"
scripts/config.pl unset MBEDTLS_PEM_PARSE_C
scripts/config.pl unset MBEDTLS_FS_IO
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min
if_build_succeeded tests/ssl-opt.sh
}
component_test_rsa_no_crt () {
msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min
scripts/config.pl set MBEDTLS_RSA_NO_CRT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s
if_build_succeeded tests/ssl-opt.sh -f RSA
msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min
if_build_succeeded tests/compat.sh -t RSA
}
component_test_no_ctr_drbg () {
msg "build: Full minus CTR_DRBG"
scripts/config.pl full
scripts/config.pl unset MBEDTLS_CTR_DRBG_C
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: no CTR_DRBG"
make test
# no ssl-opt.sh/compat.sh as they all depend on CTR_DRBG so far
}
component_test_no_hmac_drbg () {
msg "build: Full minus HMAC_DRBG"
scripts/config.pl full
scripts/config.pl unset MBEDTLS_HMAC_DRBG_C
scripts/config.pl unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: no HMAC_DRBG"
make test
# No ssl-opt.sh/compat.sh as they never use HMAC_DRBG so far,
# so there's little value in running those lengthy tests here.
}
component_test_small_ssl_out_content_len () {
msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.pl set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.pl set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
if_build_succeeded tests/ssl-opt.sh -f "Max fragment\|Large packet"
}
component_test_small_ssl_in_content_len () {
msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
scripts/config.pl set MBEDTLS_SSL_IN_CONTENT_LEN 4096
scripts/config.pl set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
if_build_succeeded tests/ssl-opt.sh -f "Max fragment"
}
component_test_small_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
scripts/config.pl set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
if_build_succeeded tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
}
component_test_small_mbedtls_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
scripts/config.pl set MBEDTLS_SSL_DTLS_MAX_BUFFERING 240
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
if_build_succeeded tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
}
component_test_full_cmake_clang () {
msg "build: cmake, full config, clang" # ~ 50s
scripts/config.pl full
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Check -D ENABLE_TESTING=On .
make
msg "test: main suites (full config)" # ~ 5s
make test
msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s
if_build_succeeded tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private'
msg "test: compat.sh RC4, DES, 3DES & NULL (full config)" # ~ 2 min
if_build_succeeded env OPENSSL_CMD="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '^$' -f 'NULL\|DES\|RC4\|ARCFOUR'
msg "test: compat.sh ARIA + ChachaPoly"
if_build_succeeded env OPENSSL_CMD="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
}
component_test_default_no_deprecated () {
# Test that removing the deprecated features from the default
# configuration leaves something consistent.
msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s
scripts/config.pl set MBEDTLS_DEPRECATED_REMOVED
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s
make test
}
component_test_full_deprecated_warning () {
# Test that there is nothing deprecated in the full configuration.
# A deprecated feature would trigger a warning (made fatal) from
# MBEDTLS_DEPRECATED_WARNING.
msg "build: make, full + MBEDTLS_DEPRECATED_WARNING" # ~ 30s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_DEPRECATED_REMOVED
scripts/config.pl set MBEDTLS_DEPRECATED_WARNING
# There are currently no tests for any deprecated feature.
# If some are added, 'make test' would trigger warnings here.
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, full + MBEDTLS_DEPRECATED_WARNING" # ~ 5s
make test
}
component_test_depends_curves () {
msg "test/build: curves.pl (gcc)" # ~ 4 min
record_status tests/scripts/curves.pl
}
component_test_depends_hashes () {
msg "test/build: depends-hashes.pl (gcc)" # ~ 2 min
record_status tests/scripts/depends-hashes.pl
}
component_test_depends_pkalgs () {
msg "test/build: depends-pkalgs.pl (gcc)" # ~ 2 min
record_status tests/scripts/depends-pkalgs.pl
}
component_build_key_exchanges () {
msg "test/build: key-exchanges (gcc)" # ~ 1 min
record_status tests/scripts/key-exchanges.pl
}
component_build_default_make_gcc_and_cxx () {
msg "build: Unix make, -Os (gcc)" # ~ 30s
make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os'
msg "test: verify header list in cpp_dummy_build.cpp"
record_status check_headers_in_cpp
msg "build: Unix make, incremental g++"
make TEST_CPP=1
}
component_test_check_params_functionality () {
msg "build+test: MBEDTLS_CHECK_PARAMS functionality"
scripts/config.pl full # includes CHECK_PARAMS
# Make MBEDTLS_PARAM_FAILED call mbedtls_param_failed().
scripts/config.pl unset MBEDTLS_CHECK_PARAMS_ASSERT
# Only build and run tests. Do not build sample programs, because
# they don't have a mbedtls_param_failed() function.
make CC=gcc CFLAGS='-Werror -O1' lib test
}
component_test_check_params_without_platform () {
msg "build+test: MBEDTLS_CHECK_PARAMS without MBEDTLS_PLATFORM_C"
scripts/config.pl full # includes CHECK_PARAMS
# Keep MBEDTLS_PARAM_FAILED as assert.
scripts/config.pl unset MBEDTLS_PLATFORM_EXIT_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_TIME_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_FPRINTF_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_MEMORY
scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_PRINTF_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_SNPRINTF_ALT
scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.pl unset MBEDTLS_PLATFORM_C
make CC=gcc CFLAGS='-Werror -O1' all test
}
component_test_check_params_silent () {
msg "build+test: MBEDTLS_CHECK_PARAMS with alternative MBEDTLS_PARAM_FAILED()"
scripts/config.pl full # includes CHECK_PARAMS
# Set MBEDTLS_PARAM_FAILED to nothing.
sed -i 's/.*\(#define MBEDTLS_PARAM_FAILED( cond )\).*/\1/' "$CONFIG_H"
make CC=gcc CFLAGS='-Werror -O1' all test
}
component_test_no_platform () {
# Full configuration build, without platform support, file IO and net sockets.
# This should catch missing mbedtls_printf definitions, and by disabling file
# IO, it should catch missing '#include <stdio.h>'
msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_PLATFORM_C
scripts/config.pl unset MBEDTLS_NET_C
scripts/config.pl unset MBEDTLS_PLATFORM_MEMORY
scripts/config.pl unset MBEDTLS_PLATFORM_PRINTF_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_FPRINTF_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_SNPRINTF_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_TIME_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_EXIT_ALT
scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.pl unset MBEDTLS_FS_IO
# Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19,
# to re-enable platform integration features otherwise disabled in C99 builds
make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs
make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test
}
component_build_no_std_function () {
# catch compile bugs in _uninit functions
msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s
scripts/config.pl full
scripts/config.pl set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT
make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os'
}
component_build_no_ssl_srv () {
msg "build: full config except ssl_srv.c, make, gcc" # ~ 30s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_SSL_SRV_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_ssl_cli () {
msg "build: full config except ssl_cli.c, make, gcc" # ~ 30s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_SSL_CLI_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_sockets () {
# Note, C99 compliance can also be tested with the sockets support disabled,
# as that requires a POSIX platform (which isn't the same as C99).
msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc.
scripts/config.pl set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib
}
component_test_memory_buffer_allocator_backtrace () {
msg "build: default config with memory buffer allocator and backtrace enabled"
scripts/config.pl set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.pl set MBEDTLS_PLATFORM_MEMORY
scripts/config.pl set MBEDTLS_MEMORY_BACKTRACE
scripts/config.pl set MBEDTLS_MEMORY_DEBUG
CC=gcc cmake .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE"
make test
}
component_test_memory_buffer_allocator () {
msg "build: default config with memory buffer allocator"
scripts/config.pl set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.pl set MBEDTLS_PLATFORM_MEMORY
CC=gcc cmake .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C"
make test
msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C"
# MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out.
if_build_succeeded tests/ssl-opt.sh -e '^DTLS proxy'
}
component_test_no_max_fragment_length () {
# Run max fragment length tests with MFL disabled
msg "build: default config except MFL extension (ASan build)" # ~ 30s
scripts/config.pl unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: ssl-opt.sh, MFL-related tests"
if_build_succeeded tests/ssl-opt.sh -f "Max fragment length"
}
component_test_no_max_fragment_length_small_ssl_out_content_len () {
msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.pl unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
scripts/config.pl set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.pl set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MFL tests (disabled MFL extension case) & large packet tests"
if_build_succeeded tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
}
component_test_null_entropy () {
msg "build: default config with MBEDTLS_TEST_NULL_ENTROPY (ASan build)"
scripts/config.pl set MBEDTLS_TEST_NULL_ENTROPY
scripts/config.pl set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
scripts/config.pl set MBEDTLS_ENTROPY_C
scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.pl unset MBEDTLS_ENTROPY_HARDWARE_ALT
scripts/config.pl unset MBEDTLS_HAVEGE_C
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan -D UNSAFE_BUILD=ON .
make
msg "test: MBEDTLS_TEST_NULL_ENTROPY - main suites (inc. selftests) (ASan build)"
make test
}
component_test_platform_calloc_macro () {
msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
scripts/config.pl set MBEDTLS_PLATFORM_MEMORY
scripts/config.pl set MBEDTLS_PLATFORM_CALLOC_MACRO calloc
scripts/config.pl set MBEDTLS_PLATFORM_FREE_MACRO free
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
make test
}
component_test_malloc_0_null () {
msg "build: malloc(0) returns NULL (ASan+UBSan build)"
scripts/config.pl full
scripts/config.pl unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
make CC=gcc CFLAGS="'-DMBEDTLS_CONFIG_FILE=\"$PWD/tests/configs/config-wrapper-malloc-0-null.h\"' -O -Werror -Wall -Wextra -fsanitize=address,undefined" LDFLAGS='-fsanitize=address,undefined'
msg "test: malloc(0) returns NULL (ASan+UBSan build)"
make test
msg "selftest: malloc(0) returns NULL (ASan+UBSan build)"
# Just the calloc selftest. "make test" ran the others as part of the
# test suites.
if_build_succeeded programs/test/selftest calloc
}
component_test_aes_fewer_tables () {
msg "build: default config with AES_FEWER_TABLES enabled"
scripts/config.pl set MBEDTLS_AES_FEWER_TABLES
make CC=gcc CFLAGS='-Werror -Wall -Wextra'
msg "test: AES_FEWER_TABLES"
make test
}
component_test_aes_rom_tables () {
msg "build: default config with AES_ROM_TABLES enabled"
scripts/config.pl set MBEDTLS_AES_ROM_TABLES
make CC=gcc CFLAGS='-Werror -Wall -Wextra'
msg "test: AES_ROM_TABLES"
make test
}
component_test_aes_fewer_tables_and_rom_tables () {
msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled"
scripts/config.pl set MBEDTLS_AES_FEWER_TABLES
scripts/config.pl set MBEDTLS_AES_ROM_TABLES
make CC=gcc CFLAGS='-Werror -Wall -Wextra'
msg "test: AES_FEWER_TABLES + AES_ROM_TABLES"
make test
}
component_test_make_shared () {
msg "build/test: make shared" # ~ 40s
make SHARED=1 all check
ldd programs/util/strerror | grep libmbedcrypto
}
component_test_cmake_shared () {
msg "build/test: cmake shared" # ~ 2min
cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On .
make
ldd programs/util/strerror | grep libmbedcrypto
make test
}
test_build_opt () {
info=$1 cc=$2; shift 2
for opt in "$@"; do
msg "build/test: $cc $opt, $info" # ~ 30s
make CC="$cc" CFLAGS="$opt -std=c99 -pedantic -Wall -Wextra -Werror"
# We're confident enough in compilers to not run _all_ the tests,
# but at least run the unit tests. In particular, runs with
# optimizations use inline assembly whereas runs with -O0
# skip inline assembly.
make test # ~30s
make clean
done
}
component_test_clang_opt () {
scripts/config.pl full
test_build_opt 'full config' clang -O0 -Os -O2
}
component_test_gcc_opt () {
scripts/config.pl full
test_build_opt 'full config' gcc -O0 -Os -O2
}
component_build_mbedtls_config_file () {
msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s
# Use the full config so as to catch a maximum of places where
# the check of MBEDTLS_CONFIG_FILE might be missing.
scripts/config.pl full
sed 's!"check_config.h"!"mbedtls/check_config.h"!' <"$CONFIG_H" >full_config.h
echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H"
make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'"
rm -f full_config.h
}
component_test_m32_o0 () {
# Build once with -O0, to compile out the i386 specific inline assembly
msg "build: i386, make, gcc -O0 (ASan build)" # ~ 30s
scripts/config.pl full
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O0" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc -O0 (ASan build)"
make test
}
support_test_m32_o0 () {
case $(uname -m) in
*64*) true;;
*) false;;
esac
}
component_test_m32_o1 () {
# Build again with -O1, to compile in the i386 specific inline assembly
msg "build: i386, make, gcc -O1 (ASan build)" # ~ 30s
scripts/config.pl full
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O1" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc -O1 (ASan build)"
make test
msg "test ssl-opt.sh, i386, make, gcc-O1"
if_build_succeeded tests/ssl-opt.sh
}
support_test_m32_o1 () {
support_test_m32_o0 "$@"
}
component_test_mx32 () {
msg "build: 64-bit ILP32, make, gcc" # ~ 30s
scripts/config.pl full
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mx32' LDFLAGS='-mx32'
msg "test: 64-bit ILP32, make, gcc"
make test
}
support_test_mx32 () {
case $(uname -m) in
amd64|x86_64) true;;
*) false;;
esac
}
component_test_min_mpi_window_size () {
msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s
scripts/config.pl set MBEDTLS_MPI_WINDOW_SIZE 1
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s
make test
}
component_test_have_int32 () {
msg "build: gcc, force 32-bit bignum limbs"
scripts/config.pl unset MBEDTLS_HAVE_ASM
scripts/config.pl unset MBEDTLS_AESNI_C
scripts/config.pl unset MBEDTLS_PADLOCK_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32'
msg "test: gcc, force 32-bit bignum limbs"
make test
}
component_test_have_int64 () {
msg "build: gcc, force 64-bit bignum limbs"
scripts/config.pl unset MBEDTLS_HAVE_ASM
scripts/config.pl unset MBEDTLS_AESNI_C
scripts/config.pl unset MBEDTLS_PADLOCK_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64'
msg "test: gcc, force 64-bit bignum limbs"
make test
}
component_test_no_udbl_division () {
msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
scripts/config.pl full
scripts/config.pl set MBEDTLS_NO_UDBL_DIVISION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
make test
}
component_test_no_64bit_multiplication () {
msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
scripts/config.pl full
scripts/config.pl set MBEDTLS_NO_64BIT_MULTIPLICATION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
make test
}
component_build_arm_none_eabi_gcc () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1" # ~ 10s
scripts/config.pl baremetal
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra -O1' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1"
${ARM_NONE_EABI_GCC_PREFIX}size library/*.o
}
component_build_arm_none_eabi_gcc_arm5vte () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte" # ~ 10s
scripts/config.pl baremetal
# Build for a target platform that's close to what Debian uses
# for its "armel" distribution (https://wiki.debian.org/ArmEabiPort).
# See https://github.com/ARMmbed/mbedtls/pull/2169 and comments.
# It would be better to build with arm-linux-gnueabi-gcc but
# we don't have that on our CI at this time.
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1"
${ARM_NONE_EABI_GCC_PREFIX}size library/*.o
}
component_build_arm_none_eabi_gcc_m0plus () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus" # ~ 10s
scripts/config.pl baremetal
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os"
${ARM_NONE_EABI_GCC_PREFIX}size library/*.o
}
component_build_arm_none_eabi_gcc_no_udbl_division () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX} -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s
scripts/config.pl baremetal
scripts/config.pl set MBEDTLS_NO_UDBL_DIVISION
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra' lib
echo "Checking that software 64-bit division is not required"
if_build_succeeded not grep __aeabi_uldiv library/*.o
}
component_build_arm_none_eabi_gcc_no_64bit_multiplication () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX} MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s
scripts/config.pl baremetal
scripts/config.pl set MBEDTLS_NO_64BIT_MULTIPLICATION
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -O1 -march=armv6-m -mthumb' lib
echo "Checking that software 64-bit multiplication is not required"
if_build_succeeded not grep __aeabi_lmul library/*.o
}
component_build_armcc () {
msg "build: ARM Compiler 5"
scripts/config.pl baremetal
make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib
msg "size: ARM Compiler 5"
"$ARMC5_FROMELF" -z library/*.o
make clean
# ARM Compiler 6 - Target ARMv7-A
armc6_build_test "--target=arm-arm-none-eabi -march=armv7-a"
# ARM Compiler 6 - Target ARMv7-M
armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m"
# ARM Compiler 6 - Target ARMv8-A - AArch32
armc6_build_test "--target=arm-arm-none-eabi -march=armv8.2-a"
# ARM Compiler 6 - Target ARMv8-M
armc6_build_test "--target=arm-arm-none-eabi -march=armv8-m.main"
# ARM Compiler 6 - Target ARMv8-A - AArch64
armc6_build_test "--target=aarch64-arm-none-eabi -march=armv8.2-a"
}
component_build_ssl_hw_record_accel() {
msg "build: default config with MBEDTLS_SSL_HW_RECORD_ACCEL enabled"
scripts/config.pl set MBEDTLS_SSL_HW_RECORD_ACCEL
make CFLAGS='-Werror -O1'
}
component_test_allow_sha1 () {
msg "build: allow SHA1 in certificates by default"
scripts/config.pl set MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
make CFLAGS='-Werror -Wall -Wextra'
msg "test: allow SHA1 in certificates by default"
make test
if_build_succeeded tests/ssl-opt.sh -f SHA-1
}
component_build_mingw () {
msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s
make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib programs
# note Make tests only builds the tests, but doesn't run them
make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror' WINDOWS_BUILD=1 tests
make WINDOWS_BUILD=1 clean
msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s
make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 lib programs
make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 tests
make WINDOWS_BUILD=1 clean
}
component_test_memsan () {
msg "build: MSan (clang)" # ~ 1 min 20s
scripts/config.pl unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (MSan)" # ~ 10s
make test
msg "test: ssl-opt.sh (MSan)" # ~ 1 min
if_build_succeeded tests/ssl-opt.sh
# Optional part(s)
if [ "$MEMORY" -gt 0 ]; then
msg "test: compat.sh (MSan)" # ~ 6 min 20s
if_build_succeeded tests/compat.sh
fi
}
component_test_valgrind () {
msg "build: Release (clang)"
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
make
msg "test: main suites valgrind (Release)"
make memcheck
# Optional parts (slow; currently broken on OS X because programs don't
# seem to receive signals under valgrind on OS X).
if [ "$MEMORY" -gt 0 ]; then
msg "test: ssl-opt.sh --memcheck (Release)"
if_build_succeeded tests/ssl-opt.sh --memcheck
fi
if [ "$MEMORY" -gt 1 ]; then
msg "test: compat.sh --memcheck (Release)"
if_build_succeeded tests/compat.sh --memcheck
fi
}
component_test_cmake_out_of_source () {
msg "build: cmake 'out-of-source' build"
MBEDTLS_ROOT_DIR="$PWD"
mkdir "$OUT_OF_SOURCE_DIR"
cd "$OUT_OF_SOURCE_DIR"
cmake "$MBEDTLS_ROOT_DIR"
make
msg "test: cmake 'out-of-source' build"
make test
# Test an SSL option that requires an auxiliary script in test/scripts/.
# Also ensure that there are no error messages such as
# "No such file or directory", which would indicate that some required
# file is missing (ssl-opt.sh tolerates the absence of some files so
# may exit with status 0 but emit errors).
if_build_succeeded ./tests/ssl-opt.sh -f 'Fallback SCSV: beginning of list' 2>ssl-opt.err
if [ -s ssl-opt.err ]; then
cat ssl-opt.err >&2
record_status [ ! -s ssl-opt.err ]
rm ssl-opt.err
fi
cd "$MBEDTLS_ROOT_DIR"
rm -rf "$OUT_OF_SOURCE_DIR"
unset MBEDTLS_ROOT_DIR
}
component_test_zeroize () {
# Test that the function mbedtls_platform_zeroize() is not optimized away by
# different combinations of compilers and optimization flags by using an
# auxiliary GDB script. Unfortunately, GDB does not return error values to the
# system in all cases that the script fails, so we must manually search the
# output to check whether the pass string is present and no failure strings
# were printed.
# Don't try to disable ASLR. We don't care about ASLR here. We do care
# about a spurious message if Gdb tries and fails, so suppress that.
gdb_disable_aslr=
if [ -z "$(gdb -batch -nw -ex 'set disable-randomization off' 2>&1)" ]; then
gdb_disable_aslr='set disable-randomization off'
fi
for optimization_flag in -O2 -O3 -Ofast -Os; do
for compiler in clang gcc; do
msg "test: $compiler $optimization_flag, mbedtls_platform_zeroize()"
make programs CC="$compiler" DEBUG=1 CFLAGS="$optimization_flag"
if_build_succeeded gdb -ex "$gdb_disable_aslr" -x tests/scripts/test_zeroize.gdb -nw -batch -nx 2>&1 | tee test_zeroize.log
if_build_succeeded grep "The buffer was correctly zeroized" test_zeroize.log
if_build_succeeded not grep -i "error" test_zeroize.log
rm -f test_zeroize.log
make clean
done
done
unset gdb_disable_aslr
}
component_check_python_files () {
msg "Lint: Python scripts"
record_status tests/scripts/check-python-files.sh
}
component_check_generate_test_code () {
msg "uint test: generate_test_code.py"
# unittest writes out mundane stuff like number or tests run on stderr.
# Our convention is to reserve stderr for actual errors, and write
# harmless info on stdout so it can be suppress with --quiet.
record_status ./tests/scripts/test_generate_test_code.py 2>&1
}
################################################################
#### Termination
################################################################
post_report () {
msg "Done, cleaning up"
cleanup
final_report
}
################################################################
#### Run all the things
################################################################
# Run one component and clean up afterwards.
run_component () {
# Back up the configuration in case the component modifies it.
# The cleanup function will restore it.
cp -p "$CONFIG_H" "$CONFIG_BAK"
current_component="$1"
# Run the component code.
if [ $QUIET -eq 1 ]; then
# msg() is silenced, so just print the component name here
echo "${current_component#component_}"
fi
redirect_out "$@"
# Restore the build tree to a clean state.
cleanup
unset current_component
}
# Preliminary setup
pre_check_environment
pre_initialize_variables
pre_parse_command_line "$@"
pre_check_git
build_status=0
if [ $KEEP_GOING -eq 1 ]; then
pre_setup_keep_going
else
record_status () {
"$@"
}
fi
pre_setup_quiet_redirect
pre_print_configuration
pre_check_tools
cleanup
# Run the requested tests.
for component in $RUN_COMPONENTS; do
run_component "component_$component"
done
# We're done.
post_report
Reference in New Issue View Git Blame Copy Permalink