MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.
Backports commit 01bc435b44b8802cc4697faa07d908684afbce4e from qemu
The r4k_tlb_t structure uses the uint_fast*_t types. Most of these
uses are in bitfields and are thus pointless, because the bitfield
itself specifies the width of the type; just use 'unsigned int'
instead. (On glibc uint_fast16_t is defined as either 32 or 64 bits,
so we know the code is not reliant on it being exactly 16 bits.)
There is also one use of uint_fast8_t, which we replace with uint8_t,
because both are exactly 8 bits on glibc and this is the only
place outside the softfloat code which uses an int_fast*_t type.
Backports commit d783f78933b212537ece77c7ec66866cc2bc0f4d from qemu
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Backports commit ec53b45bcd1f74f7a4c31331fa6d50b402cd6d26 from qemu
CP0.Status.KX/SX/UX bits are responsible for enabling access to 64-bit
Kernel/Supervisor/User Segments. If bit is cleared an access to
corresponding segment should generate Address Error Exception.
However, the guest may still be able to access some pages belonging to
the disabled 64-bit segment because we forget to flush QEMU TLB.
This patch fixes it.
Backports commit f93c3a8d0c0c1038dbe1e957eb8ab92671137975 from qemu
Add Performance Counter (4) and XNP (5) register numbers to RDHWR.
Add check_hwrena() to simplify access control checkings.
Add RDHWR support to microMIPS R6.
Backports commit b00c72180c36510bf9b124e190bd520e3b7e1358 from qemu
Implement the relationship between CP0.Status.KX, SX and UX. It should not
be possible to set UX bit if SX is 0, the same applies for setting SX if
KX is 0.
Backports commit 2dcf7908d9e0274c08911400beb7ed14276bb170 from qemu
The only generic code relying on this is linux-user, but linux users'
default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle
this.
The bootloaders can just pass EM_MIPS directly, as that is
architecture specific code.
This removes another architecture specific definition from the global
namespace.
Backports commit 04ce380e9e3fad1dbf4e86ebdf9315573a06b30e from qemu
This patch improves exception handling in MIPS.
Instructions generate several types of exceptions.
When exception is generated, it breaks the execution of the current
translation block. Implementation of the exceptions handling does not
correctly restore icount for the instruction which caused the exception.
In most cases icount will be decreased by the value equal to the size of
TB. This patch passes pointer to the translation block internals to the
exception handler. It allows correct restoring of the icount value.
Backports commit 9c708c7f9fbb813a3fac02f2728e51e62f2f5ffc from qemu
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Backports commit 97ed5ccdee95f0b98bedc601ff979e368583472c from qemu
As full specification of P5600 is available, mips32r5-generic should
be renamed to P5600 and corrected as its intention.
Correct PRid and detail of configuration.
Features which are not currently supported are described as FIXME.
Fix Config.MM bit location
Backports commit aff2bc6dc6d839caf6df0900437cc2cc9e180605 from qemu
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Backports commit ea3e9847408131abc840240bd61e892d28459452 from qemu
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access
upper word of extended to 64-bits CP0 registers.
In MIPS64, when CP0 destination register specified is the EntryLo0 or
EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or
EntryLo1. This is to compensate for RI and XI, which were shifted to bits
63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate
functions for EntryLo0 and EntryLo1.
Backports commit 5204ea79ea739b557f47fc4db96c94edcb33a5d6 from qemu
CP0.PageGrain.ELPA enables support for large physical addresses. This field
is encoded as follows:
0: Large physical address support is disabled.
1: Large physical address support is enabled.
If this bit is a 1, the following changes occur to coprocessor 0 registers:
- The PFNX field of the EntryLo0 and EntryLo1 registers is writable and
concatenated with the PFN field to form the full page frame number.
- Access to optional COP0 registers with PA extension, LLAddr, TagLo is
defined.
P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if
XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode.
In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0).
env->PABITS value is constant and indicates maximum PABITS available on
a core, whereas env->PAMask is calculated from env->PABITS and is also
affected by CP0.PageGrain.ELPA.
Backports commit e117f52636d04502fab28bd3abe93347c29f39a5 from qemu
Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32.
Introduce gen_move_low32() function which moves low 32 bits from 64-bit
temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on
MIPS32.
Backports commit 284b731a6ae47b9ebabb9613e753c4d83cf75dd3 from qemu
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit
that is set by execution of an LL instruction, and thus when placed between
an LL and SC sequence, will never cause the SC to fail.
Presence of ERETNC is denoted by the Config5.LLB.
Backports commit ce9782f40ac16660ea9437bfaa2c9c34d5ed8110 from qemu
This relatively small architectural feature adds the following:
FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are
available.
Config5.FRE: When enabled all single-precision FP arithmetic instructions,
LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions
exception.
Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1
instructions.
Enable the feature in MIPS64R6-generic CPU.
Backports commit 7c979afd11b09a16634699dd6344e3ba10c9677e from qemu
Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore
them in post_load() from the architectural registers.
Float exception flags are not present in vmstate. Information they carry
is used only by softfloat caller who translates them into MIPS FCSR.Cause,
FCSR.Flags and then they are cleared. Therefore there is no need for saving
them in vmstate.
Backports commit 644511117e7ca9f26d633a59c202a297113a796c from qemu
Add missing calls to synchronise the SoftFloat status with the CP1.FSCR:
+ for the rounding and flush-to-zero modes upon processor reset,
+ for the flush-to-zero mode on FSCR updates through the GDB stub.
Refactor code accordingly and remove the redundant RESTORE_ROUNDING_MODE
macro.
Backports commit bb962386b82c1b0e9e12fdb6b9bb62106bf1f822 from qemu
Make sure the address space is unconditionally wrapped on 32-bit
processors, that is ones that do not implement at least the MIPS III
ISA.
Also make MIPS16 SAVE and RESTORE instructions use address calculation
rather than plain arithmetic operations for stack pointer manipulation
so that their semantics for stack accesses follows the architecture
specification. That in particular applies to user software run on
64-bit processors with the CP0.Status.UX bit clear where the address
space is wrapped to 32 bits.
Backports commit c48245f0c62405f27266fcf08722d8c290520418 from qemu
Tighten ISA level checks down to MIPS II that many of our instructions
are missing. Also make sure any 64-bit instruction enables are only
applied to 64-bit processors, that is ones that implement at least the
MIPS III ISA.
Backports commit d9224450208e0de62323b64ace91f98bc31d6e2c from qemu
Make writes to CP0.Status and CP0.Cause have the same effect as
executing corresponding MTC0 instructions would in Kernel Mode. Also
ignore writes in the user emulation mode.
Currently for requests from the GDB stub we write all the bits across
both registers, ignoring any read-only locations, and do not synchronise
the environment to evaluate side effects. We also write these registers
in the user emulation mode even though a real kernel presents them as
read only.
Backports commit 81a423e6c6d3ccaa79de4e58024369c660c1eeb4 from qemu
Make the data type used for the CP0.Config4 and CP0.Config5 registers
and their mask signed, for consistency with the remaining 32-bit CP0
registers, like CP0.Config0, etc.
Backports commit 8280b12c0e4b515d707509dde4ddde05d9bda4ef from qemu
