Because the design of the PMU requires that the counter values be
converted between their delta and guest-visible forms for mode
filtering, an additional hook which occurs before the EL is changed is
necessary.
Backports commit b5c53d1b3886387874f8c8582b205aeb3e4c3df6 from qemu
This eliminates the need for fetching it from el_change_hook_opaque, and
allows for supporting multiple el_change_hooks without having to hack
something together to find the registered opaque belonging to GICv3.
Backports commit d5a5e4c93dae0dc3feb402cf7ee78d846da1a7e1 from qemu
In commit 95695effe8caa552b8f2 we changed the v7M/v8M stack
pop code to use a new v7m_stack_read() function that checks
whether the read should fail due to an MPU or bus abort.
We missed one call though, the one which reads the signature
word for the callee-saved register part of the frame.
Correct the omission.
Backports commit 4818bad98c8212fbbb0525d10761b6b65279ab92 from qemu
Remove a stale TODO comment -- we have now made the arm_ldl_ptw()
and arm_ldq_ptw() functions propagate physical memory read errors
out to their callers.
Backports commit 145772707fe80395b87c244ccf5699a756f1946b from qemu
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Backports commit afd46fcad2dceffda35c0586f5723c127b6e09d8 from qemu
The parameters for tcg_gen_insn_start are target_ulong, which may be split
into two TCGArg parameters for storage in the opcode on 32-bit hosts.
Fixes the ARM target and its direct use of tcg_set_insn_param, which would
set the wrong argument in the 64-on-32 case.
Backports commit 9743cd5736263e90d312b2c33bd739ffe1eae70d from qemu
Currently our PMSAv7 and ARMv7M MPU implementation cannot handle
MPU region sizes smaller than our TARGET_PAGE_SIZE. However we
report that in a slightly confusing way:
DRSR[3]: No support for MPU (sub)region alignment of 9 bits. Minimum is 10
The problem is not the alignment of the region, but its size;
tweak the error message to say so:
DRSR[3]: No support for MPU (sub)region size of 512 bytes. Minimum is 1024.
Backports commit 8aec759b45fa6986c0b159cb27353d6abb0d5d73 from qemu
Make sure we are not treating architecturally Undefined instructions
as a SWP, by verifying the opcodes as per section A8.8.229 of ARMv7-A
specification. Bits [21:20] must be zero for this to be a SWP or SWPB.
We also choose to UNDEF for the architecturally UNPREDICTABLE case of
bits [11:8] not being zero.
Backports commit c4869ca630a57f4269bb932ec7f719cef5bc79b8 from qemu
For debug exceptions due to breakpoints or the BKPT instruction which
are taken to AArch32, the Fault Address Register is architecturally
UNKNOWN. We were using that as license to simply not set
env->exception.vaddress, but this isn't correct, because it will
expose to the guest whatever old value was in that field when
arm_cpu_do_interrupt_aarch32() writes it to the guest IFSR. That old
value might be a FAR for a previous guest EL2 or secure exception, in
which case we shouldn't show it to an EL1 or non-secure exception
handler. It might also be a non-deterministic value, which is bad
for record-and-replay.
Clear env->exception.vaddress before taking breakpoint debug
exceptions, to avoid this minor information leak.
Backports commit 548f514cf89dd9ab39c0cb4c063097bccf141fdd from qemu
Now that we have a helper function specifically for the BRK and
BKPT instructions, we can set the exception.fsr there rather
than in arm_cpu_do_interrupt_aarch32(). This allows us to
use our new arm_debug_exception_fsr() helper.
In particular this fixes a bug where we were hardcoding the
short-form IFSR value, which is wrong if the target exception
level has LPAE enabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1756927
Backports commit 62b94f31d0df75187bb00684fc29e8639eacc0c5 from qemu
When a debug exception is taken to AArch32, it appears as a Prefetch
Abort, and the Instruction Fault Status Register (IFSR) must be set.
The IFSR has two possible formats, depending on whether LPAE is in
use. Factor out the code in arm_debug_excp_handler() which picks
an FSR value into its own utility function, update it to use
arm_fi_to_lfsc() and arm_fi_to_sfsc() rather than hard-coded constants,
and use the correct condition to select long or short format.
In particular this fixes a bug where we could select the short
format because we're at EL0 and the EL1 translation regime is
not using LPAE, but then route the debug exception to EL2 because
of MDCR_EL2.TDE and hand EL2 the wrong format FSR.
Backports commit 81621d9ab8a0f07956e67850b15eebf6d6992eec from qemu
The MDCR_EL2.TDE bit allows the exception level targeted by debug
exceptions to be set to EL2 for code executing at EL0. We handle
this in the arm_debug_target_el() function, but this is only used for
hardware breakpoint and watchpoint exceptions, not for the exception
generated when the guest executes an AArch32 BKPT or AArch64 BRK
instruction. We don't have enough information for a translate-time
equivalent of arm_debug_target_el(), so instead make BKPT and BRK
call a special purpose helper which can do the routing, rather than
the generic exception_with_syndrome helper.
Backports commit c900a2e62dd6dde11c8f5249b638caad05bb15be from qemu
In OE project 4.15 linux kernel boot hang was observed under
single cpu aarch64 qemu. Kernel code was in a loop waiting for
vtimer arrival, spinning in TC generated blocks, while interrupt
was pending unprocessed. This happened because when qemu tried to
handle vtimer interrupt target had interrupts disabled, as
result flag indicating TCG exit, cpu->icount_decr.u16.high,
was cleared but arm_cpu_exec_interrupt function did not call
arm_cpu_do_interrupt to process interrupt. Later when target
reenabled interrupts, it happened without exit into main loop, so
following code that waited for result of interrupt execution
run in infinite loop.
To solve the problem instructions that operate on CPU sys state
(i.e enable/disable interrupt), and marked as DISAS_UPDATE,
should be considered as DISAS_EXIT variant, and should be
forced to exit back to main loop so qemu will have a chance
processing pending CPU state updates, including pending
interrupts.
This change brings consistency with how DISAS_UPDATE is treated
in aarch32 case.
Backports commit a75a52d62418dafe462be4fe30485501d1010bb9 from qemu
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.
Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.
Backports commit 5a790cc4b942e651fec7edc597c19b637fad5a76 from qemu
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Backports commit 3f71e724e283233753f1b5b3d6a30948d3084636 from qemu
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Backports commit 0dacec874fa3b3fd34b0d0670fa257efdcbbebd0 from qemu
Backports commits 2994fd96d986578a342f2342501b4ad30f6d0a85,
701e3c78ce45fa630ffc6826c4b9a4218954bc7f, and
d1853231c60d16af78cf4d1608d043614bfbac0b from qemuu
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Backports commit 8642c1b81e0418df066a7960a7426d85a923a253 from qemu
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Backports relevant parts of commit 15f8b14228b856850df3fa5ba999ad96521f2208 from qemu
Now we have a working '-cpu max', the linux-user-only
'any' CPU is pretty much the same thing, so implement it
that way.
For the moment we don't add any of the extra feature bits
to the system-emulation "max", because we don't set the
ID register bits we would need to to advertise those
features as present.
Backports commit a0032cc5427d0d396aa0a9383ad9980533448ea4 from qemu
Add support for "-cpu max" for ARM guests. This CPU type behaves
like "-cpu host" when KVM is enabled, and like a system CPU with
the maximum possible feature set otherwise. (Note that this means
it won't be migratable across versions, as we will likely add
features to it in future.)
Backports commit bab52d4bba3f22921a690a887b4bd0342f2754cd from qemu
The cortex A53 TRM specifies that bits 24 and 25 of the L2CTLR register
specify the number of cores in the processor, not the total number of
cores in the system. To report this correctly on machines with multiple
CPU clusters (ARM's big.LITTLE or Xilinx's ZynqMP) we need to allow
the machine to overwrite this value. To do this let's add an optional
property.
Backports commit f9a697112ee64180354f98309a5d6b691cc8699d from qemu
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.
Backports commit e264d29de28c5b0be3d063307ce9fb613b427cc3 from qemu
The integer size check was already outside of the opcode switch;
move the floating-point size check outside as well. Unify the
size vs index adjustment between fp and integer paths.
Backports commit 449f264b1749ac0e59c58bbc2eacdb3dc302c2bf from qemu
