This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Backports commit 38dc12947ec9106237f9cdbd428792c985cd86ae from qemu
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Backports commit 37ee55a081b7863ffab2151068dd1b2f11376914 from qemu
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Backports commit bab1671f0fa928fd678a22f934739f06fd5fd035 from qemu
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Backports commit e7632cfa8b76cdbbc1c76e8737338ef5844e7d60 from qemu
PowerPC Altivec does not support direct moves between vector registers
and general registers. So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Backports commit 240c08d0998f402c325fce489de0d14831048128 from qemu
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Backports commit 78113e83e0007e869c9f0cb4c0497a77538988e3 from qemu
The only fixed_reg is cpu_env, and it should not be modified
during any TB. Therefore code that tries to special-case moves
into a fixed_reg is dead. Remove it.
Backports commit d63e3b6e694ad6c887be135dddb9cd4893f1a844 from qemu
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB. In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.
This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.
Backports commit 7ecd02a06f8f4c0bbf872ecc15e37035b7e1df5f from qemu
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Backports commit 6e6c4efed995d9eca6ae0cfdb2252df830262f50 from qemu
Currently, a jump to a label that is not defined anywhere will
be emitted not be relocated. This results in a jump to a random
jump target. With tcg debugging, print a diagnostic to the -d op
file and abort.
This could help debug or detect errors like
c2d9644e6d ("target/arm: Fix crash on conditional instruction in an IT block")
Backports commit bef16ab4e641636b4e85c3d863b4257ce0be4e6f from qemu
Free the argument register only after we have verified that the
temporary is not already in that register. This case is likely
now that we are back propagating the preferred register.
Backports commit 4250da10923347c9ee907f8d72bd93dfa5ee8742 from qemu
With these preferences, we can arrange for function call arguments to
be computed into the proper registers instead of requiring extra moves.
Backports commit 25f49c5f1508ddf081ce89fa6bbfd87a51eea37b from qemu
No need for a "tcg_" prefix for a static function; we already
have another "la_" prefix for indicating liveness analysis.
Pass in nb_globals and nb_temps, as we will already have them
in registers for other loops within the parent function.
Backports commit 2616c8082143373e794b62444bf81754f50dbf6b from qemu
Try harder to honor the output_pref. When we're forced to allocate
a second register for the input, it does not need to use the input
constraint; that will be honored by the register we allocate for the
output and a move is already required.
Backports commit d62816f2db439b2dd761c674f0256f21d9dd2ed0 from qemu
Allocate storage for, but do not yet fill in, per-opcode
preferences for the output operands. Pass it in to the
register allocation routines for output operands.
Backports commit 69e3706d2b473815e382552e729d12590339e0ac from qemu
This new argument will aid register allocation by indicating how
the temporary will be used in future. If the preference cannot
be satisfied, fall back to the constraints of the current insn.
Short circuit the preference when it cannot be satisfied or if
it does not further constrain the operation.
With an eye toward optimizing function call sequences, optimize
for the preferred_reg set containing a single register.
For the moment, all users pass 0 for preference.
Backports commit b016486e7baddb43cfc1e51909b05cde9cf82e0c from qemu
Delete trivially dead code that follows unconditional branches and
noreturn helpers. These can occur either via optimization or via
the structure of a target's translator following an exception.
Backports commit b4fc67c7afd2c338d6e7c73a7f428dfe05ae0603 from qemu
This will move the assert for success from within (subroutines of)
patch_reloc into the callers. It will also let new code do something
different when a relocation is out of range.
For the moment, all backends are trivially converted to return true.
Backports commit 6ac1778676f4259c10b0629ccd9df319a5d1baeb from qemu
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically
allocate TCGOps", 2017-12-29).
Backports commit c1f543b739086733024e31d74a52d9e41553f316 from qemu
In 6001f7729e12 we partially attempt to address the branch
displacement overflow caused by 15fa08f845.
However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case. This is still
much less than the maximum forward branch distance of 32764 bytes.
Backports commit abebf92597186be2bc48d487235da28b1127860f from qemu
ppc64 uses a BC instruction to call the tcg_out_qemu_ld/st
slow path. BC instruction uses a relative address encoded
on 14 bits.
The slow path functions are added at the end of the generated
instructions buffer, in the reverse order of the callers.
So more we have slow path functions more the distance between
the caller (BC) and the function increases.
This patch changes the behavior to generate the functions in
the same order of the callers.
Backports commit 6001f7729e12dd1d810291e4cbf83cee8e07441d from qemu
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros.
Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr,
tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32.
Use inlines instead of macros where possible.
Backports commit 5bfa803448638a45542441fd6b7cc1241403ea72 from qemu
Opcodes are added for scalar and vector shifts, but considering the
varied semantics of these do not expose them to the front ends. Do
go ahead and provide them in case they are needed for backend expansion.
Backports commit d0ec97967f940bbc11dced83422b39c224127f1e from qemu
We had two fields specific to INDEX_op_call. Rename these and
add some macros so that the fields may be reused for other opcodes.
Backports commit cd9090aa9dbba30db8aec9a2fc103aaf1ab0f5a7 from qemu
With no fixed array allocation, we can't overflow a buffer.
This will be important as optimizations related to host vectors
may expand the number of ops used.
Use QTAILQ to link the ops together.
Backports commit 15fa08f8451babc88d733bd411d4c94976f9d0f8 from qemu
