unicorn/tests/unit/test_hookcounts.c
egberts ac21e74641 Issues #465
Pull Request #466
Added one more test case
Fixed two test case into passing (for a total of 3 passing out of 7)
2016-03-16 11:49:25 -07:00

281 lines
7.7 KiB
C

// Test hook evocation count
//
// Objective is to demonstrate finer duration control of
// emulation by counts of instruction code
//
#include "unicorn_test.h"
#include <inttypes.h>
#define DEBUG 1
#define OK(x) uc_assert_success(x)
volatile int expected_instructions = 0;
volatile int total_instructions = 0;
// NOTE: It would appear that this UC_HOOK_CODE is being done before the
// uc_count_fb hook.
// So, termination by uc->emu_count has not been done yet here...
static void test_code_hook(uc_engine *uc,
uint64_t address,
uint32_t size,
void *user_data)
{
++total_instructions;
if (total_instructions > expected_instructions)
{
uc_emu_stop(uc);
}
#ifdef DEBUG
printf("instruction at 0x%"PRIx64": ", address);
uint8_t tmp[256];
if (!uc_mem_read(uc, address, tmp, size)) {
uint32_t i;
for (i = 0; i < size; i++) {
printf("0x%x ", tmp[i]);
}
printf("\n");
}
#endif // DEBUG
}
/* Called before every test to set up a new instance */
static int setup32(void **state)
{
uc_hook trace1;
uc_engine *uc;
OK(uc_open(UC_ARCH_X86, UC_MODE_32, &uc));
*state = uc;
// trace all instructions
OK(uc_hook_add(uc, &trace1, UC_HOOK_CODE, test_code_hook, NULL, 1, 0));
return 0;
}
/* Called after every test to clean up */
static int teardown(void **state)
{
uc_engine *uc = *state;
OK(uc_close(uc));
*state = NULL;
return 0;
}
/******************************************************************************/
static void
test_hook_count(uc_engine *uc,
const uint8_t *code,
int start_offset,
int code_length,
int expected_instructions)
{
#define BASEADDR 0x1000000
#define MEMSIZE (2 * 1024 * 1024)
uint64_t address = BASEADDR + (expected_instructions * MEMSIZE);
total_instructions = 0;
#undef BASEADDR
// map a new 2MB memory for this emulation
OK(uc_mem_map(uc, address, MEMSIZE, UC_PROT_ALL));
// write machine code to be emulated to memory
OK(uc_mem_write(uc, address, code, code_length));
#ifdef DEBUG
printf("Address: %8.8lx\n", address);
printf("Start : %8.8lx\n", address + start_offset);
printf("End : %8.8lx\n", address + code_length - 1);
printf("Count : %d\n", expected_instructions);
#endif
OK(uc_emu_start(uc,
address+start_offset,
address+code_length,
0,
expected_instructions));
assert_int_equal(expected_instructions, total_instructions);
// map 2MB memory for this emulation
OK(uc_mem_unmap(uc, address, MEMSIZE));
}
/* Perform fine-grain emulation control of exactly 1 instruction */
/* of 1-opcode code space*/
static void test_hook_count_1_begin(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
};
int code_length = sizeof(code);
int start_offset = 0;
int ins_count = 1;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
/* Perform fine-grain emulation control of exactly 1 instruction */
static void test_hook_count_1_midpoint(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int start_offset = code_length/2;
int ins_count = 1;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
/* Perform fine-grain emulation control of exactly 1 instruction */
static void test_hook_count_1_end(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int start_offset = code_length - 1;
int ins_count = 1;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
/* Perform fine-grain emulation control over a range of */
/* varied instruction steps. */
static void test_hook_count_range(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int start_offset;
int ins_count = 2;
for (start_offset = 2; start_offset < (code_length - ins_count); start_offset++)
{
printf("Iteration %d\n", start_offset);
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
}
static void test_hook_count_end(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int ins_count = 3;
int start_offset = sizeof(code) - ins_count;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
static void test_hook_count_begins(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int ins_count = 3;
int start_offset = 0;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
static void test_hook_count_midpoint(void **state)
{
uc_engine *uc = *state;
const uint8_t code[] = {
0x41, // inc ECX @0x1000000
0x41, // inc ECX
0x41, // inc ECX
0x41, // inc ECX @0x1000003
0x41, // inc ECX
0x41, // inc ECX
0x42, // inc EDX @0x1000006
0x42, // inc EDX
};
int code_length = sizeof(code);
int ins_count = 3;
int start_offset = 2;
test_hook_count(uc, code, start_offset, code_length, ins_count);
}
int main(void)
{
const struct CMUnitTest tests[] = {
cmocka_unit_test_setup_teardown(test_hook_count_1_begin, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_1_midpoint, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_1_end, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_begins, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_range, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_midpoint, setup32, teardown),
cmocka_unit_test_setup_teardown(test_hook_count_end, setup32, teardown),
};
return cmocka_run_group_tests(tests, NULL, NULL);
}