Commit Graph

325 Commits

Author SHA1 Message Date
Morph
54ea3c47c8 controllers/npad: Make press_state atomic 2020-12-18 10:33:28 -05:00
Morph
1c773c0869 controllers/npad: Validate device handles before use
Some games such as NEKOPARA Vol. 3 send invalid device handles when calling InitializeVibrationDevice. Introduce a check to validate the device handle before use.
2020-12-12 07:05:38 -05:00
bunnei
6750b4d3af
Merge pull request #4998 from Morph1984/bioshock-patch
hid: Check if applet_resource exists in InitializeVibrationDevice
2020-11-28 23:20:23 -08:00
german
4eb7327559 Add missing types to NpadCommunicationMode 2020-11-28 21:56:02 -06:00
bunnei
312a8bd4b4
Merge pull request #5021 from german77/StubCommunicationMode
HID: Stub set and get NpadCommunicationMode
2020-11-28 15:22:46 -08:00
german
3898d8f0d7 Stub set and get NpadCommunicationMode 2020-11-26 21:35:11 -06:00
Lioncash
1a954b2a59 service: Eliminate usages of the global system instance
Completely removes all usages of the global system instance within the
services code by passing in the using system instance to the services.
2020-11-26 20:03:11 -05:00
Morph
6f70e1b1ff hid: Check if applet_resource exists in InitializeVibrationDevice 2020-11-25 13:33:30 -05:00
Morph
ad50209383 hid: Reimplement Begin/EndPermitVibrationSession
Upon further investigation, these commands allow temporary vibrations even when the "Controller Vibration" system setting is disabled. As a result, vibrations are allowed when either the system setting or this flag is set to true. Therefore, we can only block vibrations when both flags are set to false.
2020-11-15 23:33:21 -05:00
Morph
d8ad2f3484 controllers/npad: Load input devices on init 2020-11-15 23:33:21 -05:00
Morph
97b2220a82 general: Fix compiler warnings on linux and miscellaneous changes 2020-11-15 23:33:21 -05:00
Morph
30e0d1c973 controllers/npad: Remove the old vibration filter
Previously we used a vibration filter that filters out amplitudes close to each other. It turns out there are cases where this results into vibrations that are too inaccurate. Remove this and move the 100Hz vibration filter (Only allowing a maximum of 100 vibrations per second) from sdl_impl to npad when enable_accurate_vibrations is set to false.
2020-11-15 23:33:21 -05:00
Morph
978ca65f59 hid: Implement InitializeVibrationDevice and IsVibrationDeviceMounted 2020-11-15 23:33:20 -05:00
Morph
e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph
38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph
d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph
92fa5257c7 hid: Mark Begin/EndPermitVibrationSession as stubs
The implementation of these commands seem incomplete and causes rumble in Super Mario Party to stop working since only EndPermitVibrationSession is called. Thus, these are better off being marked as a stub until this can be investigated more thoroughly.
2020-11-15 23:33:20 -05:00
Morph
373408ae8c controllers/npad: Send an empty vibration on destruction/deactivation
This stops all controllers from continuously vibrating when emulation is stopped.
2020-11-15 23:33:20 -05:00
Morph
70f16f1722 hid: Stub IsVibrationDeviceMounted
- Used in Super Mario Odyssey
2020-11-15 23:33:20 -05:00
Morph
9b501af8e3 controllers/npad: Add heuristics to reduce rumble state changes
Sending too many state changes in a short period of time can cause massive performance issues.
As a result, we have to use several heuristics to reduce the number of state changes to minimize/eliminate this performance impact while maintaining the quality of these vibrations as much as possible.
2020-11-15 23:33:20 -05:00
Morph
652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph
e02ef3c3be controllers/npad: Stop games from vibrating incorrect controllers
Fixes vibration in 1-2 Switch and potentially other games where they would vibrate both players' joycons at the same time.
2020-11-15 23:33:20 -05:00
Morph
07b81f57ba hid: Fix controller rumble based on new research
This fixes the issue where rumble is only sent to the first controller.
Now, individual controllers can receive their own rumble commands.
2020-11-15 23:33:20 -05:00
Morph
31de52513e hid: Pop a struct of parameters instead of popping individual parameters
Some parameters need to be doubleword aligned due to the presence of the applet_resource_user_id.
Previously, this value was invalid in many commands where it was not doubleword aligned when popped.
2020-11-15 23:33:20 -05:00
Morph
e3c2749986 hid: Reorder all HID commands
Reorders all HID commands in command id order.
2020-11-15 23:33:20 -05:00
Morph
b92bf51ae1 hid: Implement GetVibrationDeviceInfo
The first u32 describes the vibration device type which is a Linear Resonant Actuator used in Nintendo Switch controller hardware.

The second u32 describes the vibration device position, in this case distinguishing between left and right vibration actuators.

Pro Controllers have 2 LRAs each that can vibrate independently of each other, which means they have 2 distinct vibration device handles to distinguish between the two actuators.

Similarly for joycons, the left joycon can be distinguished from the right joycon through the vibration device handle since each joycon has 1 LRA.
2020-11-15 23:33:20 -05:00
Morph
16e2e1c45f hid: Stub InitializeVibrationDevice 2020-11-15 23:33:20 -05:00
Morph
428ce8ec29 controllers/npad: Rename NPadType to NpadStyleSet
This more accurately represents the underlying type and avoids confusion with NpadType
2020-11-15 23:33:20 -05:00
Morph
0a966e2cac controllers/npad: Add DeviceHandle struct
A DeviceHandle describes a vibration device or six-axis sensor based on the npad type, npad id, and device index/position
2020-11-15 23:33:20 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph
c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
Lioncash
020519def8 service: Update function tables
Updates function tables according to info on SwitchBrew.
2020-10-27 21:19:46 -04:00
bunnei
3d592972dc
Revert "core: Fix clang build" 2020-10-20 19:07:39 -07:00
Lioncash
be1954e04c core: Fix clang build
Recent changes to the build system that made more warnings be flagged as
errors caused building via clang to break.

Fixes #4795
2020-10-17 19:50:39 -04:00
Lioncash
39c8d18feb core/CMakeLists: Make some warnings errors
Makes our error coverage a little more consistent across the board by
applying it to Linux side of things as well. This also makes it more
consistent with the warning settings in other libraries in the project.

This also updates httplib to 0.7.9, as there are several warning
cleanups made that allow us to enable several warnings as errors.
2020-10-13 13:16:49 -04:00
bunnei
92adb69fa7
Merge pull request #4736 from Morph1984/home-button-input-protection-stub
hid: Stub HomeButtonInputProtection service commands
2020-10-07 14:54:05 -07:00
bunnei
614bd0ee8c
Merge pull request #4742 from german77/InputFilter
HID: Only use inputs corresponding to controller type
2020-10-05 21:40:09 -07:00
bunnei
182cf7d631
Merge pull request #4734 from german77/motionfusion
HID: Add Stub for EnableSixAxisSensorFusion
2020-10-01 22:39:39 -07:00
german
2f47b27654 Only use inputs corresponding to controller type 2020-10-01 19:39:53 -05:00
german
283616dbd8 Stubbed EnableSixAxisSensorFusion 2020-09-30 10:00:24 -05:00
David
4d0ae1a17a
Merge pull request #4291 from german77/ImplementControllerRumble
input_common: First implementation of controller rumble
2020-09-30 21:24:11 +10:00
Morph
6380731486 hid: Stub HomeButtonInputProtection service commands
- Used in 1-2 Switch. Given that we do not emulate the functionality of the home button yet, we can stub this for now.
2020-09-30 06:38:24 -04:00
german
ab88c2f611 First implementation of controller rumble 2020-09-29 10:38:25 -04:00
german
ddff03cff5 Use different timing for motion 2020-09-23 19:09:33 -05:00
bunnei
754109fd54
Merge pull request #4683 from Morph1984/NpadHandheldActivationMode-impl
hid: Implement Get/SetNpadHandheldActivationMode
2020-09-20 12:39:20 -07:00
bunnei
8a85a562ed
Merge pull request #4643 from FearlessTobi/decrease-pad-update-interval
Test: Decrease pad_update_ns
2020-09-19 00:39:50 -07:00
Morph
ab961e0701 hid: Implement Get/SetNpadHandheldActivationMode
- Used in Clubhouse Games: 51 Worldwide Classics
2020-09-18 10:10:30 -04:00
bunnei
3f6d83b27c
Merge pull request #4594 from german77/MotionHID
hid/configuration: Implement motion controls to HID
2020-09-17 12:39:01 -07:00
bunnei
03179ecafe
Merge pull request #4597 from Morph1984/mjolnir-p2
Project Mjölnir: Part 2 - Controller Applet
2020-09-10 19:28:23 -04:00
FearlessTobi
57162e1df3 Test: Decrease pad_update_ns
There have been reports of quite heavy input lag in the past.
Compared to Citra for example, our pad_update_ns value is very high.
So let's decrease it and see if it helps with this problem.
2020-09-10 16:38:53 +02:00