The check was already done later when calling ECB, (as evidenced by the tests
passing, which have a call with data_unit set to NULL), but it's more readable
to have it here too, and more helpful when debugging.
Some of the documentation is obsolete in its reference to key slots
when it should discuss key handles. This may require a further pass,
possibly with some reorganization of error codes.
Update the documentation of functions that modify key slots (key
material creation and psa_set_key_policy()) to discuss how they affect
storage.
Move psa_load_persistent_key_into_slot,
psa_internal_make_key_persistent and psa_internal_release_key_slot to
the slot management module.
Expose psa_import_key_into_slot from the core.
After this commit, there are no longer any functions declared in
psa_crypto_slot_management.h and defined in psa_crypto.c. There are
still function calls in both directions between psa_crypto.c and
psa_crypto_slot_management.c.
Move the key slot array and its initialization and wiping to the slot
management module.
Also move the lowest-level key slot access function psa_get_key_slot
and the auxiliary function for slot allocation
psa_internal_allocate_key_slot to the slot management module.
Since Mbed TLS 2.10, there is a single copy of
mbedtls_platform_zeroize for the whole library instead of one per
module. Update the PSA crypto module accordingly.
This commit finishes the removal of support for direct access to key
slots in psa_crypto.c.
This marks the end of the necessary phase of the transition to key
handles. The code should subsequently be refactored to move key slot
management from psa_crypto.c to psa_crypto_slot_management.c.
This commit marks the beginning of the removal of support for direct
access to key slots. From this commit on, programs that use
psa_key_slot_t will no longer compile.
Subsequent commits will remove the now-unused legacy support in
psa_crypto.c.
The code only worked if psa_key_id_t (formerly psa_key_slot_t)
promoted to int and every value fit in int. Now the code only assumes
that psa_key_id_t is less wide than unsigned long, which is the case
since psa_key_id_t is a 32-bit type in our implementation.
Move the persistent storage implementation from psa_key_slot_t to
psa_key_id_t. For the most part, this just means changing the types of
function arguments.
Update the documentation of some functions to reflect the fact that
the slot identifier is purely a storage identifier and is not related
to how the slot is designated in memory.
Many places in the code called psa_remove_key_data_from_memory (which
preserves metadata for the sake of failues in psa_import_key) followed
by clearing the slot data. Use an auxiliary function for this.
Access the slot directly rather than going through psa_get_key_slot.
Unlike other places where key slots are accessed through
psa_get_key_slot, here, we know where all the slots are and there are
no policy or permission considerations.
This resolves a memory leak: allocated slots were not getting freed
because psa_get_key_slot rejected the attempt of accessing them
directly rather than via a handle.
Implement psa_allocate_key, psa_open_key, psa_create_key,
psa_close_key.
Add support for keys designated to handles to psa_get_key_slot, and
thereby to the whole API.
Allocated and non-allocated keys can coexist. This is a temporary
stage in order to transition from the use of direct slot numbers to
allocated handles only. Once all the tests and sample programs have
been migrated to use handles, the implementation will be simplified
and made more robust with support for handles only.
At the moment, the in-storage slot identifier is the in-memory slot
number. But track them separately, to prepare for API changes that
will let them be different (psa_open_key, psa_create_key).
The function called through the macro MBEDTLS_PARAM_FAILED() must be supplied by
users and makes no sense as a library function, apart from debug and test.
Function calls to alternative implementations have to follow certain
rules in order to preserve correct functionality. To avoid accidentally
breaking these rules we state them explicitly in the ECP module for
ourselves and every contributor to see.
We initialized the ECC hardware before calling
mbedtls_ecp_mul_shortcuts(). This in turn calls
mbedtls_ecp_mul_restartable(), which initializes and frees the hardware
too. This issue has been introduced by recent changes and caused some
accelerators to hang.
We move the initialization after the mbedtle_ecp_mul_shortcuts() calls
to avoid double initialization.
The SSL module accesses ECDH context members directly. This can't work
with the new context, where we can't make any assumption about the
implementation of the context.
This commit makes use of the new functions to avoid accessing ECDH
members directly. The only members that are still accessed directly are
the group ID and the point format and they are independent from the
implementation.
The SSL module accesses ECDH context members directly to print debug
information. This can't work with the new context, where we can't make
assumptions about the implementation of the context. This commit adds
new debug functions to complete the encapsulation of the ECDH context
and work around the problem.
The functionality from public API functions are moved to
`xxx_internal()` functions. The public API functions are modified to do
basic parameter validation and dispatch the call to the right
implementation.
There is no intended change in behaviour when
`MBEDTLS_ECDH_LEGACY_CONTEXT` is enabled.
In the future we want to support alternative ECDH implementations. We
can't make assumptions about the structure of the context they might
use, and therefore shouldn't access the members of
`mbedtls_ecdh_context`.
Currently the lifecycle of the context can't be done without direct
manipulation. This commit adds `mbedtls_ecdh_setup()` to complete
covering the context lifecycle with functions.
`mbedtls_ecp_tls_read_group()` both parses the group ID and loads the
group into the structure provided. We want to support alternative
implementations of ECDH in the future and for that we need to parse the
group ID without populating an `mbedtls_ecp_group` structure (because
alternative implementations might not use that).
This commit moves the part that parses the group ID to a new function.
There is no need to test the new function directly, because the tests
for `mbedtls_ecp_tls_read_group()` are already implicitly testing it.
There is no intended change in behaviour in this commit.
Add missing compilation guards that broke the build if either GCM or
CCM was not defined.
Add missing guards on test cases that require GCM or CBC.
The build and tests now pass for any subset of {MBEDTLS_CCM_C,
MBEDTLS_GCM_C}. There are still unused variables warnings if neither
is defined.
Refactor `mpi_write_hlp()` to not be recursive, to fix stack overflows.
Iterate over the `mbedtls_mpi` division of the radix requested,
until it is zero. Each iteration, put the residue in the next LSB
of the output buffer. Fixes#2190
Refactor mbedtls_ctr_drbg_update_seed_file and
mbedtls_hmac_drbg_update_seed_file to make the error logic clearer.
The new code does not use fseek, so it works with non-seekable files.
Add a function to configure entropy sources. For testing only.
Use it to test that the library initialization fails properly if there is no
entropy source.
There is a probability that r will be encoded as 31 or less bytes in DER,
so additional padding is added in such case.
Added a signature-part extraction function to tidy up the code further.
Return early from mbedtls_pk_write_pubkey_der - public opaque key
exporting is expected to contain all of the needed data, therefore it shouldn't
be written again.
Return early from mbedtls_pk_write_pubkey_der - public opaque key
exporting is expected to contain all of the needed data, therefore it shouldn't
be written again.
It's better for names in the API to describe the "what" (opaque keys) rather
than the "how" (using PSA), at least since we don't intend to have multiple
function doing the same "what" in different ways in the foreseeable future.
Unfortunately the can_do wrapper does not receive the key context as an
argument, so it cannot check psa_get_key_information(). Later we might want to
change our internal structures to fix this, but for now we'll just restrict
opaque PSA keys to be ECDSA keypairs, as this is the only thing we need for
now. It also simplifies testing a bit (no need to test each key type).
Reasons:
- For the first release, we attempt to support TLS-1.2 only,
- At least TLS-1.0 is known to not work at the moment, as
for CBC ciphersuites the code in mbedtls_ssl_decrypt_buf()
and mbedtls_ssl_encrypt_buf() assumes that mbedtls_cipher_crypt()
updates the structure field for the IV in the cipher context,
which the PSA-based implementation currently doesn't.
This commit modifies the default SSL ticket implementation
from `library/ssl_ticket.c` to use PSA-based cipher context
for ticket creation and parsing.
As in mbedtls_ssl_derive_keys() adapted in an earlier commit,
we allow fallback to the ordinary mbedtls_cipher_setup()
if the provided cipher is not known. We do this even though
we always call mbedtls_ssl_ticket_setup() with AES-GCM
in our own code since this function is public and might
be used with other ciphers by users.
This commit changes the code path in mbedtls_ssl_derive_keys()
responsible for setting up record protection cipher contexts
to attempt to use the new API mbedtls_cipher_setup_psa() in
case MBEDTLS_USE_PSA_CRYPTO is set.
For that, the AEAD tag length must be provided, which is already
computed earlier in mbedtls_ssl_derive_keys() and only needs to be
stored a function scope to be available for mbedtls_cipher_setup_psa().
If mbedtls_cipher_setup_psa() fails cleanly indicating that the
requested cipher is not supported in PSA, we fall through to
the default setup using mbedtls_cipher_setup(). However, we print
a debug message in this case, to allow catching the fallthrough in
tests where we know we're using a cipher which should be supported
by PSA.
mbedtls_cipher_setup_psa() should return
MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE when the requested
cipher is not supported by PSA, so that the caller can
try the original mbedtls_cipher_setup() instead.
The previous version of mbedtls_cipher_setup_psa(), however,
only attempted to translate the cipher mode (GCM, CCM, CBC,
ChaChaPoly, Stream), but didn't consider the underlying
cipher primitive. Hence, it wouldn't fail when attempting
to setup a cipher context for, say, 3DES-CBC, where CBC
is currently supported by PSA but 3DES isn't.
This commit adds a check to mbedtls_cipher_setup_psa()
for whether the requested cipher primitive is available
in the underlying PSA Crypto implementation, and fails
cleanly with MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE if
it is isn't.
For AEAD ciphers, the information contained in mbedtls_cipher_info
is not enough to deduce a PSA algorithm value of type psa_algorithm_t.
This is because mbedtls_cipher_info doesn't contain the AEAD tag
length, while values of type psa_algorithm_t do.
This commit adds the AEAD tag length as a separate parameter
to mbedtls_cipher_setup_psa(). For Non-AEAD ciphers, the value
must be 0.
This approach is preferred over passing psa_algorithm_t directly
in order to keep the changes in existing code using the cipher layer
small.
Mbed TLS cipher layer allows usage of keys for other purposes
than indicated in the `operation` parameter of `mbedtls_cipher_setkey()`.
The semantics of the PSA Crypto API, in contrast, checks key
usage against the key policy.
As a remedy, this commit modifies the PSA key slot setup to
always allow both encryption and decryption.
This commit implements the internal key slot management performed
by PSA-based cipher contexts. Specifically, `mbedtls_cipher_setkey()`
wraps the provided raw key material into a key slot, and
`mbedtls_cipher_free()` destroys that key slot.
This field determines whether a cipher context should
use an external implementation of the PSA Crypto API for
cryptographic operations, or Mbed TLS' own crypto library.
The commit also adds dummy implementations for the cipher API.
The code maintains the invariant that raw and opaque PSKs are never
configured simultaneously, so strictly speaking `ssl_conf_remove_psk()`
need not consider clearing the raw PSK if it has already cleared an
opaque one - and previously, it didn't. However, it doesn't come at
any cost to keep this check as a safe-guard to future unforeseen
situations where opaque and raw PSKs _are_ both present.
In multiple places, it occurrs as the fixed length of
the master secret, so use a constant with a descriptive
name instead. This is reinforced by the fact the some
further occurrences of '48' are semantically different.
There is a probability that r will be encoded as 31 or less bytes in DER,
so additional padding is added in such case.
Added a signature-part extraction function to tidy up the code further.
Reasons:
- For the first release, we attempt to support TLS-1.2 only,
- At least TLS-1.0 is known to not work at the moment, as
for CBC ciphersuites the code in mbedtls_ssl_decrypt_buf()
and mbedtls_ssl_encrypt_buf() assumes that mbedtls_cipher_crypt()
updates the structure field for the IV in the cipher context,
which the PSA-based implementation currently doesn't.
This commit modifies the default SSL ticket implementation
from `library/ssl_ticket.c` to use PSA-based cipher context
for ticket creation and parsing.
As in mbedtls_ssl_derive_keys() adapted in an earlier commit,
we allow fallback to the ordinary mbedtls_cipher_setup()
if the provided cipher is not known. We do this even though
we always call mbedtls_ssl_ticket_setup() with AES-GCM
in our own code since this function is public and might
be used with other ciphers by users.
This commit changes the code path in mbedtls_ssl_derive_keys()
responsible for setting up record protection cipher contexts
to attempt to use the new API mbedtls_cipher_setup_psa() in
case MBEDTLS_USE_PSA_CRYPTO is set.
For that, the AEAD tag length must be provided, which is already
computed earlier in mbedtls_ssl_derive_keys() and only needs to be
stored a function scope to be available for mbedtls_cipher_setup_psa().
If mbedtls_cipher_setup_psa() fails cleanly indicating that the
requested cipher is not supported in PSA, we fall through to
the default setup using mbedtls_cipher_setup(). However, we print
a debug message in this case, to allow catching the fallthrough in
tests where we know we're using a cipher which should be supported
by PSA.
mbedtls_cipher_setup_psa() should return
MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE when the requested
cipher is not supported by PSA, so that the caller can
try the original mbedtls_cipher_setup() instead.
The previous version of mbedtls_cipher_setup_psa(), however,
only attempted to translate the cipher mode (GCM, CCM, CBC,
ChaChaPoly, Stream), but didn't consider the underlying
cipher primitive. Hence, it wouldn't fail when attempting
to setup a cipher context for, say, 3DES-CBC, where CBC
is currently supported by PSA but 3DES isn't.
This commit adds a check to mbedtls_cipher_setup_psa()
for whether the requested cipher primitive is available
in the underlying PSA Crypto implementation, and fails
cleanly with MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE if
it is isn't.
For AEAD ciphers, the information contained in mbedtls_cipher_info
is not enough to deduce a PSA algorithm value of type psa_algorithm_t.
This is because mbedtls_cipher_info doesn't contain the AEAD tag
length, while values of type psa_algorithm_t do.
This commit adds the AEAD tag length as a separate parameter
to mbedtls_cipher_setup_psa(). For Non-AEAD ciphers, the value
must be 0.
This approach is preferred over passing psa_algorithm_t directly
in order to keep the changes in existing code using the cipher layer
small.
Mbed TLS cipher layer allows usage of keys for other purposes
than indicated in the `operation` parameter of `mbedtls_cipher_setkey()`.
The semantics of the PSA Crypto API, in contrast, checks key
usage against the key policy.
As a remedy, this commit modifies the PSA key slot setup to
always allow both encryption and decryption.
This commit implements the internal key slot management performed
by PSA-based cipher contexts. Specifically, `mbedtls_cipher_setkey()`
wraps the provided raw key material into a key slot, and
`mbedtls_cipher_free()` destroys that key slot.
This field determines whether a cipher context should
use an external implementation of the PSA Crypto API for
cryptographic operations, or Mbed TLS' own crypto library.
The commit also adds dummy implementations for the cipher API.
Allow mbedtls_psa_crypto_free to be called twice, or without a prior
call to psa_crypto_init. Keep track of the initialization state more
precisely in psa_crypto_init so that mbedtls_psa_crypto_free knows
what to do.
It's better for names in the API to describe the "what" (opaque keys) rather
than the "how" (using PSA), at least since we don't intend to have multiple
function doing the same "what" in different ways in the foreseeable future.
Unfortunately the can_do wrapper does not receive the key context as an
argument, so it cannot check psa_get_key_information(). Later we might want to
change our internal structures to fix this, but for now we'll just restrict
opaque PSA keys to be ECDSA keypairs, as this is the only thing we need for
now. It also simplifies testing a bit (no need to test each key type).
The code maintains the invariant that raw and opaque PSKs are never
configured simultaneously, so strictly speaking `ssl_conf_remove_psk()`
need not consider clearing the raw PSK if it has already cleared an
opaque one - and previously, it didn't. However, it doesn't come at
any cost to keep this check as a safe-guard to future unforeseen
situations where opaque and raw PSKs _are_ both present.
In multiple places, it occurrs as the fixed length of
the master secret, so use a constant with a descriptive
name instead. This is reinforced by the fact the some
further occurrences of '48' are semantically different.
For Makefiles, enable overriding where includes can come from in order to
enable the parent module to set the include path. This allows the parent
module to specify that its config.h should be used, even when the submodule
when built standalone would use a different config.h.
For CMake, always look in the parent's include folder and our own. List the
parent's include folder first, so that preference is given to parent
include files.
When building Mbed Crypto as a subproject, don't add targets for
libmbedx509 or libmbedtls, as the parent project should build these. The
parent project will define USE_CRYPTO_SUBMODULE variable when using Mbed
Crypto as a submodule, so we can depend on that variable to control whether
or not we build non-crypto libraries.
The new file is conditionally compiled with the new mbedtls
configuration option that Mbed OS would set by default -
`MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C`.
-
Using finer grained control over include directories will allow differnt
targets to use different include files. This will be useful when the
`crypto` subcomponent wants to use its own include files instead of or in
addition to the top level ones.
In mbedtls_mpi_write_binary, avoid leaking the size of the number
through timing or branches, if possible. More precisely, if the number
fits in the output buffer based on its allocated size, the new code's
trace doesn't depend on the value of the number.
