Explain how MBEDTLS_CTR_DRBG_ENTROPY_LEN is set next to the security
strength statement, rather than giving a partial explanation (current
setting only) in the documentation of MBEDTLS_CTR_DRBG_ENTROPY_LEN.
NIST and many other sources call it a "personalization string", and
certainly not "device-specific identifiers" which is actually somewhat
misleading since this is just one of many things that might go into a
personalization string.
Improve the formatting and writing of the documentation based on what
had been done for CTR_DRBG.
Document the maximum size and nullability of some buffer parameters.
Document that a derivation function is used.
Document the security strength of the DRBG depending on the
compile-time configuration and how it is set up. In particular,
document how the nonce specified in SP 800-90A is set.
Mention how to link the ctr_drbg module with the entropy module.
* State explicit whether several numbers are in bits or bytes.
* Clarify whether buffer pointer parameters can be NULL.
* Explain the value of constants that are dependent on the configuration.
There is a 50% performance drop in the SCA_CM enabled encrypt and
decrypt functions. Therefore use the older version of encrypt/decypt
functions when SCA_CM is disabled.
* upstream/pr/2945:
Rename macro MBEDTLS_MAX_RAND_DELAY
Update signature of mbedtls_platform_random_delay
Replace mbedtls_platform_enforce_volatile_reads 2
Replace mbedtls_platform_enforce_volatile_reads
Add more variation to random delay countermeasure
Add random delay to enforce_volatile_reads
Update comments of mbedtls_platform_random_delay
Follow Mbed TLS coding style
Add random delay function to platform_utils
The MBEDTLS_ERR_SSL_WANT_READ and MBEDTLS_ERR_SSL_WANT_WRITE are
errors that can be ignored, so increase the hamming distance between
them and the non-ignorable errors and keep still some distance from
a success case. This mitigates an attack where single bit-flipping could
change a non-ignorable error to being an ignorable one.
- Add configuration for AES_SCA_COUNTERMEASURES to config.h. By
default the feature is disabled.
- Add AES_SCA_COUNTERMEASURES configuration check to check_config.h
- Add AES_SCA_COUNTERMEASURES test to all.sh
This commit first changes the return convention of EccPoint_mult_safer() so
that it properly reports when faults are detected. Then all functions that
call it need to be changed to (1) follow the same return convention and (2)
properly propagate UECC_FAULT_DETECTED when it occurs.
Here's the reverse call graph from EccPoint_mult_safer() to the rest of the
library (where return values are translated to the MBEDTLS_ERR_ space) and test
functions (where expected return values are asserted explicitly).
EccPoint_mult_safer()
EccPoint_compute_public_key()
uECC_compute_public_key()
pkparse.c
tests/suites/test_suite_pkparse.function
uECC_make_key_with_d()
uECC_make_key()
ssl_cli.c
ssl_srv.c
tests/suites/test_suite_pk.function
tests/suites/test_suite_tinycrypt.function
uECC_shared_secret()
ssl_tls.c
tests/suites/test_suite_tinycrypt.function
uECC_sign_with_k()
uECC_sign()
pk.c
tests/suites/test_suite_tinycrypt.function
Note: in uECC_sign_with_k() a test for uECC_vli_isZero(p) is suppressed
because it is redundant with a more thorough test (point validity) done at the
end of EccPoint_mult_safer(). This redundancy was introduced in a previous
commit but not noticed earlier.
We don't really need a secure hash for that, something like CRC32 would
probably be enough - but we have SHA-256 handy, not CRC32, so use that for the
sake of simplicity.
By semi-internal I mean functions that are only public because they're used in
more than once compilation unit in the library (for example in ecc.c and
ecc_dsa.c) but should not really be part of the public-facing API.
Same motivation as for the other parameters. This is the last one, making the
curve structure empty, so it's left with a dummy parameter for legal reasons.
-Add flow monitor, loop integrity check and variable doubling to
harden mbedtls_hmac_drbg_update_ret.
-Use longer hamming distance for nonce usage in hmac_drbg_reseed_core
-Return actual value instead of success in mbedtls_hmac_drbg_seed and
mbedtls_hmac_drbg_seed_buf
-Check illegal condition in hmac_drbg_reseed_core.
-Double buf/buf_len variables in mbedtls_hmac_drbg_random_with_add
-Add more hamming distance to MBEDTLS_HMAC_DRBG_PR_ON/OFF
This commit removes from the TinyCrypt header and source code files, the
configuration condition on MBEDTLS_USE_TINYCRYPT to include the file
contents.
This is to allow use of the library by the Factory Tool without enabling
MBEDTLS_USE_TINYCRYPT, and also removes a modification we've made to make the
code closer to the upstream TinyCrypt making it easier to maintain.
Before this commit, if a certificate only had one issue (for example, if the
"untrusted" bit was the only set in flags), an attacker that could flip this
single bit between the moment it's set and the moment flags are checked before
returning from mbedtls_x509_crt_verify() could make the entire verification
routine appear to succeed (return 0 with no bit set in flags).
Avoid that by making sure that flags always has either 0 or at least 9 bits
set during the execution of the function. However, to preserve the API, clear
the 8 extra bits before returning. This doesn't open the door to other
attacks, as fortunately the API already had redundancy: either both flags and
the return value are 0, or flags has bits set and the return value is non-zero
with at least 16 bits set (assuming 32-bit 2-complement ints).
Inspection of the generated assembly showed that before this commit, armcc 5
was optimizing away the successive reads to the volatile local variable that's
used for double-checks. Inspection also reveals that inserting a call to an
external function is enough to prevent it from doing that.
The tested versions of ARM-GCC, Clang and Armcc 6 (aka armclang) all keep the
double read, with our without a call to an external function in the middle.
The inserted function can also be changed to insert a random delay if
desired in the future, as it is appropriately places between the reads.
This can be used by Mbed TLS functions in any module to signal that a fault
attack is likely happening, so this can be appropriately handled by the
application (report, fall back to safer mode or even halt, etc.)
Previously it was returning 0 or 1, so flipping a single bit in the return
value reversed its meaning. Now it's returning the diff itself.
This is safe because in the two places it's used (signature verification and
point validation), invalid values will have a large number of bits differing
from the expected value, so diff will have a large Hamming weight.
An alternative would be to return for example -!(diff == 0), but the
comparison itself is prone to attacks (glitching the appropriate flag in the
CPU flags register, or the conditional branch if the comparison uses one). So
we'd need to protect the comparison, and it's simpler to just skip it and
return diff itself.
This is a first step in protecting against fault injection attacks: the
attacker can no longer change failure into success by flipping a single bit.
Additional steps are needed to prevent other attacks (instruction skip etc)
and will be the object of future commits.
The return value of uECC_vli_equal() should be protected as well, which will
be done in a future commit as well.
Currently functions that may return success or failure tend to do so by
returning 0 or 1. If an active physical attacker can flip a bit in memory or
registers at the right time, they may easily change a failure value into a
success value, with potentially catastrophic security consequences.
As typical attackers can only flip a few bits, an element of protection
against such attacks is to ensure a sufficient Hamming distance between
failure values and the success value. This commit introduces such values,
which will put to use in critical functions in future commits.
In addition to SUCCESS and FAILURE, a third value ATTACK_DETECTED is
introduced, which can be used later when suspicious-looking events are noticed
(static data changed when it shouldn't, double condition checking returning
inconsistent results, etc.).
Values are chosen so that Hamming distances are large, and that no value is
the complement of another, in order to avoid unwanted compiler optimisations.
Note: the error values used by Mbed TLS are already safe (assuming 32-bit
integers) as they are of the form -x with x in the range [1, 2^15) so their
Hamming distance with the success value (0) is at least 17, so it's hard for
an attacker to turn an error value into the success value (or vice-versa).
This avoids the need for each calling site to manually regularize the scalar
and randomize coordinates, which makes for simpler safe use and saves 50 bytes
of code size in the library.
-Add config option for AES encyption only to config.h. Feature is
disabled by default.
-Enable AES encrypt only feature in baremetal.h configuration
-Remove AES encypt only feature from full config
Do not reserve additionl space for mbedtls_aes_context if config
option AES_ONLY_128_BIT_KEY_LENGTH is used and PADLOCK_C is not used.
This reduces RAM usage by 96 bytes.
In baremetal configuration reserve space for 10 128-bit keys in order
to save 112 bytes of heap.
- Do not include MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH to full config
as it requires also MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
- Update check_config to check availability of flags:
MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
* mbedtls-2.16: (25 commits)
Fix compilation error
Add const to variable
Fix endianity issue when reading uint32
Increase test suite timeout
Reduce stack usage of test_suite_pkcs1_v15
Reduce stack usage of test_suite_pkcs1_v21
Reduce stack usage of test_suite_rsa
Reduce stack usage of test_suite_pk
Enable MBEDTLS_MEMORY_DEBUG in memory buffer alloc test in all.sh
Remove unnecessary memory buffer alloc and memory backtrace unsets
Disable DTLS proxy tests for MEMORY_BUFFER_ALLOC test
all.sh: restructure memory allocator tests
Add missing dependency in memory buffer alloc set in all.sh
Don't set MBEDTLS_MEMORY_DEBUG through `scripts/config.pl full`
Add cfg dep MBEDTLS_MEMORY_DEBUG->MBEDTLS_MEMORY_BUFFER_ALLOC_C
Add all.sh run with full config and ASan enabled
Add all.sh run with MBEDTLS_MEMORY_BUFFER_ALLOC_C enabled
Update documentation of exceptions for `config.pl full`
Adapt all.sh to removal of buffer allocator from full config
Disable memory buffer allocator in full config
...
Use MBEDTLS_ENTROPY_HARDWARE_ALT instead of a new global RNG
flag. When this flag is enabled, the platform provides the RNG.
When running unit tests, rnd_std_rand should be used by overriding
the mbedtls_hardware_poll.
As replacements of standard library functions, they should have the same
prototype, including return type.
While it doesn't usually matter when used directly, it does when the address
of the function is taken, as done with memset_func, used for implementing
mbedtls_platform_zeroize().
