Line issue trackers are conceptually a subclass of file issue
trackers: they're file issue trackers where issues arise from checking
each line independently. So make it an actual subclass.
Pylint pointed out the design smell: there was an abstract method that
wasn't always overridden in concrete child classes.
Make check-python-files.sh run pylint on all *.py files (in
directories where they are known to be present), rather than list
files explicitly.
Fix a bug whereby the return status of check-python-files.sh was only
based on the last file passing, i.e. errors in other files were
effectively ignored.
Make check-python-files.sh run pylint unconditionally. Since pylint3
is not critical, make all.sh to skip running check-python-files.sh if
pylint3 is not available.
The pylint configuration in .pylint was a modified version of the
output of `pylint --generate-rcfile` from an unknown version of
pylint. Replace it with a file that only contains settings that are
modified from the default, with an explanation of why each setting is
modified.
The new .pylintrc was written from scratch, based on the output of
pylint on the current version of the files and on a judgement of what
to silence generically, what to silence on a case-by-case basis and
what to fix.
Add a test case for doing an ECDH calculation by calling
mbedtls_ecdh_get_params on both keys, with keys belonging to
different groups. This should fail, but currently passes.
When all.sh invokes check_headers_in_cpp, a backup config.h exists. This
causes a stray difference vs cpp_dummy_build.cpp. Fix by only collecting
the *.h files in include/mbedtls.
Change-Id: Ifd415027e856858579a6699538f06fc49c793570
`test_hkdf` in the hkdf test suites consumed stack of ~6KB with
6 buffers of ~1KB each. This causes stack overflow on some platforms
with smaller stack. The buffer sizes were reduced. By testing, the sizes
can be reduced even further, as the largest seen size is 82 bytes(for okm).
Wildcard patterns now work with command line COMPONENT arguments
without --except as well as with. You can now run e.g.
`all.sh "check_*` to run all the sanity checks.
After backing up and restoring config.h, `git diff-files` may report
it as potentially-changed because it isn't sure whether the index is
up to date. Use `git diff` instead: it actually reads the file.
Only look for armcc if component_build_armcc is to be executed,
instead of requiring the option --no-armcc.
You can still pass --no-armcc, but it's no longer required when
listing components to run. With no list of components or an exclude
list on the command line, --no-armcc is equivalent to having
build_armcc in the exclude list.
Build the list of components to run in $RUN_COMPONENTS as part of
command line parsing. After parsing the command line, it no longer
matters how this list was built.
Extract the list of available components by looking for definitions of
functions called component_xxx. The previous code explicitly listed
all components in run_all_components, which opened the risk of
forgetting to list a component there.
Add a conditional execution facility: if a function support_xxx exists
and returns false then component_xxx is not executed (except when the
command line lists an explicit set of components to execute).
MAKEFLAGS was set to -j if it was already set, instead of being set if
not previously set as intended. So now all.sh will do parallel builds
if invoked without MAKEFLAGS in the environment.
Don't bail out of all.sh if the OS isn't Linux. We only expect
everything to pass on a recent Linux x86_64, but it's useful to call
all.sh to run some components on any platform.
In all.sh, always run both MemorySanitizer and Valgrind. Valgrind is
slower than ASan and MSan but finds some things that they don't.
Run MSan unconditionally, not just on Linux/x86_64. MSan is supported
on some other OSes and CPUs these days.
Use `all.sh --except test_memsan` if you want to omit MSan because it
isn't supported on your platform. Use `all.sh --except test_memcheck`
if you want to omit Valgrind because it's too slow.
Make the test scripts more portable (tested on FreeBSD): don't insist
on GNU sed, and recognize amd64 as well as x86_64 for `uname -m`. The
`make` utility must still be GNU make.
Call `set disable-randomization off` only if it seems to be supported.
The goal is to neither get an error about disable-randomization not
being supported (e.g. on FreeBSD), nor get an error if it is supported
but fails (e.g. on Ubuntu).
Only fiddle with disable-randomization from all.sh, which cares
because it reports the failure of ASLR disabling as an error. If a
developer invokes the Gdb script manually, a warning about ASLR
doesn't matter.
Use `cmake -D CMAKE_BUILD_TYPE=Asan` rather than manually setting
`-fsanitize=address`. This lets cmake determine the necessary compiler
and linker flags.
With UNSAFE_BUILD on, force -Wno-error. This is necessary to build
with MBEDTLS_TEST_NULL_ENTROPY.
Merge the work on all.sh that was done on mbedtls-2.14.0 with the
changes from mbedtls-2.14.0 to mbedtls-2.16.0.
There is a merge conflict in test/scripts/all.sh, which is the only
file that was modified in the all.sh work branch. I resolved it by
taking the copy from the all.sh branch and applying the changes
between mbedtls-2.14.0 and mbedtls-2.16.0. These changes consisted of
two commits:
* "Add tests to all.sh for CHECK_PARAMS edge cases": adds two
test components which are reproduced here as
test_check_params_without_platform and component_test_check_params_silent.
* "tests: Backup config.h before modifying it": moot because the
component framework introduced in the all.sh branch backs up config.h
systematically.
In all.sh, always save config.h before running a component, instead of
doing it manually in each component that requires it (except when we
forget, which has happened). This would break a script that requires
config.h.bak not to exist, but we don't have any of those.
Call cleanup from run_component instead of calling it from each
individual component function.
Clean up after each component rather than before. With the new
structure it makes more sense for each component to leave the place
clean. Run cleanup once at the beginning to start from a clean slate.
Move almost all the code of this script into functions. There is no
intended behavior change. The goal of this commit is to make
subsequent improvements easier to follow.
A very large number of lines have been reintended. To see what's going
on, ignore whitespace differences (e.g. diff -w).
I followed the following rules:
* Minimize the amount of code that gets moved.
* Don't change anything to what gets executed or displayed.
* Almost all the code must end up in a function.
* One function does one thing. For most of the code, that's from one
"cleanup" to the next.
* The test sequence functions (run_XXX) are independent.
The change mostly amounts to putting chunks of code into a function
and calling the functions in order. A few test runs are conditional;
in those cases the conditional is around the function call.
The test suites `test_suite_gcm.aes{128,192,256}_en.data` contains
numerous NIST test vectors for AES-*-GCM against which the GCM
API mbedtls_gcm_xxx() is tested.
However, one level higher at the cipher API, no tests exist which
exercise mbedtls_cipher_auth_{encrypt/decrypt}() for GCM ciphers,
although test_suite_cipher.function contains the test auth_crypt_tv
which does precisely that and is already used e.g. in
test_suite_cipher.ccm.
This commit replicates the test vectors from
test_suite_gcm.aes{128,192,256}_en.data in test_suite_cipher.gcm.data
and adds a run of auth_crypt_tv for each of them.
The conversion was mainly done through the sed command line
```
s/gcm_decrypt_and_verify:\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):
\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\)/auth_crypt_tv:
\1:\2:\4:\5:\3:\7:\8:\9/
```
tests/Makefile had some unused warnings disabled unnecessarily, which
test-ref-configs.pl was turning back on. We don't need to disable these warnings
so I'm turning them back on.
Dependent on configured options, not all of the helper functions were being
used, which was leading to warning of unused functions with Clang.
To avoid any complex compile time options, or adding more logic to
generate_test_code.py to screen out unused functions, those functions which were
provoking the warning were changed to remove static, remove them from file
scope, and expose them to the linker.
Document when a context must be initialized or not, when it must be
set up or not, and whether it needs a private key or a public key will
do.
The implementation is sometimes more liberal than the documentation,
accepting a non-set-up context as a context that can't perform the
requested information. This preserves backward compatibility.
The MPI_VALIDATE_RET() macro cannot be used for parameter
validation of mbedtls_mpi_lsb() because this function returns
a size_t.
Use the underlying MBEDTLS_INTERNAL_VALIDATE_RET() insteaed,
returning 0 on failure.
Also, add a test for this behaviour.
For mbedtls_pk_parse_key and mbedtls_pk_parse_keyfile, the password is
optional. Clarify what this means: NULL is ok and means no password.
Validate parameters and test accordingly.
The test that mbedtls_aria_free() accepts NULL parameters
can be performed even if MBEDTLS_CHECK_PARAMS is unset, but
was previously included in the test case aria_invalid_params()
which is only executed if MBEDTLS_CHECK_PARAMS is set.
It's good to make a backup of config.h before modifying it, so that when
"cleanup" runs the next test has a clean default config.h to start from.
Fixes 840af0a9ae ("Add tests to all.sh for CHECK_PARAMS edge cases")
Parameter validation was previously performed and tested unconditionally
for the ChaCha/Poly modules. This commit therefore only needs go guard the
existing tests accordingly and use the appropriate test macros for parameter
validation.
With the build option SKIP_TEST_SUITES=..., the specified test suites
are built, but skipped when running tests. Usage:
make check SKIP_TEST_SUITES=timing,gcm
or
cmake -D SKIP_TEST_SUITES=timing,gcm ...
The list can be separated by any of space, comma or semicolon, and each
element can be a regular expression in ERE syntax except that "." stands
for itself. Skipping "foo" skips not only "foo" itself but also
any "foo.bar", but does not skip "foobar".
Previously, one could change the definition of AES_VALIDATE_RET() to return
some other code than MBEDTLS_ERR_AES_BAD_INPUT_DATA, and the test suite
wouldn't notice. Now this modification would make the suite fail as expected.
The test framework for validation of parameters depends on the macro
MBEDTLS_PARAM_FAILED() being set to its default value when building the
library. So far the test framework attempted to define this macro but this was
the wrong place - this definition wouldn't be picked by the library.
Instead, a different approach is taken: skip those tests when the macro is
defined in config.h, as in that case we have no way to know if it will indeed
end up calling mbedtls_param_failed() as we need it to.
This commit was tested by manually ensuring that aes_invalid_params:
- passes (and is not skipped) in the default configuration
- is skipped when MBEDTLS_PARAM_FAILED() is defined in config.h
The previous prototype gave warnings are the strings produced by #cond and
__FILE__ are const, so we shouldn't implicitly cast them to non-const.
While at it modifying most example programs:
- include the header that has the function declaration, so that the definition
can be checked to match by the compiler
- fix whitespace
- make it work even if PLATFORM_C is not defined:
- CHECK_PARAMS is not documented as depending on PLATFORM_C and there is
no reason why it should
- so, remove the corresponding #if defined in each program...
- and add missing #defines for mbedtls_exit when needed
The result has been tested (make all test with -Werror) with the following
configurations:
- full with CHECK_PARAMS with PLATFORM_C
- full with CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS with PLATFORM_C
Additionally, it has been manually tested that adding
mbedtls_aes_init( NULL );
near the normal call to mbedtls_aes_init() in programs/aes/aescrypt2.c has the
expected effect when running the program.
It was inconsistent between files: sometimes 3 arguments, sometimes one.
Align to 1 argument for the macro and 3 for the function, because:
- we don't need 3 arguments for the macro, it can add __FILE__ and __LINE__
in its expansion, while the function needs them as parameters to be correct;
- people who re-defined the macro should have flexibility, and 3 arguments
can give the impression they they don't have as much as they actually do;
- the design document has the macro with 1 argument, so let's stick to that.
Change the use of setjmp and longjmp in signalling parameter validation failures
when using the MBEDTLS_CHECK_PARAMS config.h option. This change allows
all calls which might result in a call to the parameter validation failure
handler to always be caught, even without use of the new macros, by placing a
setjmp() in the outer function which calls the test function, which the handler
can jump to.
This has several benefits:
* it allows us to remove the clang compiler warning (-Wclobbered) caused
by local auto variables being in the same function as the call to setjmp.
* removes the need to wrap all function calls in the test functions with the
TEST_ASSERT() macro. Now all parameter validation function calls should be
caught.
We've changed the behavior of "-v" to no longer output test summary
statuses. Update basic-build-test.sh to use the test runner's verbosity
option "-v 2", so that the basic-build-test.sh script can get the summary
statuses it needs.
The tests for the ECDH key exchange that use the context accessed it
directly. This can't work with the new context, where we can't make any
assumptions about the implementation of the context. This commit works
around this problem and comes with the cost of allocating an extra
structures on the stack when executing the test.
One of the tests is testing an older interface for the sake of backward
compatibility. The new ECDH context is not backward compatible and this
test doesn't make any sense for it, therefore we skip this test in
non-legacy mode.
The recently added `mbedtls_ecdh_setup()` function is not used in the
tests yet. This commit adapts the tests to the new workflow.
Having done that, the old lifecycle is not tested anymore, so we add a
new test to ensure backward compatibility.
Fix parsing error that contains special character.
The previous implementation replaced the `:` char with `\n`,
and split on `\n`. Test data containing strings with `\n`
were split as well. Fixes#2193.
The split function caused strings containing `\:` to add
another escape char, resulting in `\\:`. This caused the
tests with the `\:` in the string data to fail.
The fix doesn't replace with `\n`, but splits all `:` that
are not preceded with `\`. After that, removes the preceding `\` char.
Since the AD too long is a limitation on Mbed TLS,
HW accelerators may support this. Run the test for AD too long,
only if `MBEDTLS_CCM_ALT` is not defined.
Addresses comment in #1996.
Detect Git merge artifacts. These are lines starting with "<<<<<<",
"|||||||" or ">>>>>>>" followed by a space, or containing just
"=======". For "=======", exempt Markdown files, because this can be
used to underline a title, as a compromise between false negatives and
false positives.
The check-files script contains the strings "TODO" and "todo" in order to
search for files that contain TODO items. So, any check-files script would
need to be excluded from the list of files that gets checked for "TODO".
Normally, the script excludes itself from checks, but with the addition of
the crypto submodule, there is another copy of the script present from the
project root. We must avoid checking check-files scripts for TODO items.
This also helps if you run check-files from another working tree in your
working tree.
The invocation of `compat.sh` that runs those tests was added in all.sh but
not here, resulting in our reported coverage figures being slightly lower than
what we actually test. Fixing that omission change the figures reported from:
Lines Tested : 19105 of 22623 84.4%
Functions Tested : 1392 of 1460 95.3%
to:
Lines Tested : 19126 of 22623 84.5%
Functions Tested : 1399 of 1460 95.8%
It requires `$OPENSSL_NEXT` to be set and point to an OpenSSL version in the
1.1.1 line or later.
This commit introduces variants test-ca_utf8.crt,
test-ca_printablestring.crt and test-ca_uppercase.crt
of tests/data_files/test-ca.crt which differ from
test-ca.crt in their choice of string encoding and
upper and lower case letters in the DN field. These
changes should be immaterial to the recovation check,
and three tests are added that crl.pem, which applies
to test-ca.crt, is also considered as applying to
test-ca_*.crt.
The test files were generated using PR #1641 which
- adds a build instruction for test-ca.crt to
tests/data_files/Makefile which allows easy
change of the subject DN.
- changes the default string format from `PrintableString`
to `UTF8String`.
Specifically:
- `test-ca_utf8.crt` was generated by running
`rm test-ca.crt && make test-ca.crt`
on PR #1641.
- `test-ca_uppercase.crt`, too, was generated by running
`rm test-ca.crt && make test-ca.crt`
on PR #1641, after modifying the subject DN line in the build
instruction for `test-ca.crt` in `tests/data_files/Makefile`.
- `test-ca_printable.crt` is a copy of `test-ca.crt`
because at the time of this commit, `PrintableString` is
still the default string format.
Enable passing a number to "-v" in order to set the level of verbosity.
Print detailed test failure information at verbosity level 1 or higher.
Display summary messages at the verbosity level 2 or higher. Print
detailed test information at verbosity level 3 or higher, whether the
test failed or not. This enables a more readable output style that
includes detailed failure information when a failure occurs.
Previous commits have added or modified build instructions for
server1*, server2*, server5*, test-ca*, cli-rsa* in the Makefile
tests/data_files/Makefile, or the apps they invoke have been changed.
This commit regenerates those files to make sure they are in match with
the build instructions.
This commit introduces variants test-ca_utf8.crt,
test-ca_printablestring.crt and test-ca_uppercase.crt
of tests/data_files/test-ca.crt which differ from
test-ca.crt in their choice of string encoding and
upper and lower case letters in the DN field. These
changes should be immaterial to the recovation check,
and three tests are added that crl.pem, which applies
to test-ca.crt, is also considered as applying to
test-ca_*.crt.
Previously, CSRs and CRTs from the server1* family in testa/data_files
were generated through OpenSSL. This commit changes the build instructions
to use Mbed TLS' example applications programs/x509/cert_write and
programs/x509/cert_req instead.
