Fix sloppy wording around stricly less-than vs less or equal in
comments. Also fix an off-by-one error in a comparison which led to
calling setrlimit if the limit was exactly the minimum required for
the test, which was unnecessary but harmless.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_net_poll() and mbedtls_net_recv_timeout() rely on select(),
which represents sets of file descriptors through the fd_set type.
This type cannot hold file descriptors larger than FD_SETSIZE. Make
sure that these functions identify this failure code.
Without a proper range check of the file descriptor in the
mbedtls_net_xxx function, this test fails when running with UBSan:
```
net_poll beyond FD_SETSIZE ........................................ source/library/net_sockets.c:482:9: runtime error: index 16 out of bounds for type '__fd_mask [16]'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior source/library/net_sockets.c:482:9 in
```
This is a non-regression test for
https://github.com/ARMmbed/mbedtls/issues/4169 .
The implementation of this test is specific to Unix-like platforms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A place to put tests for the net_sockets module (MBEDTLS_NET_C feature).
Start with a context smoke test.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The primary goal of this commit is to fix various comments where
`clang -Wdocumentation` identified a discrepancy between the actual
function parameters and the documented parameters. The discrepancies
were due to copypasta, formatting issues or documentation that had
diverged from the implementation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This ensures that test cases won't leave persistent files behind even
on failure, provided they use TEST_USES_KEY_ID(). Test cases that
don't use this macro are unaffected.
Tests that use PSA_DONE() midway and expect persistent keys to survive
must use PSA_SESSION_DONE() instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Merge the two identical definitions of TEST_USES_KEY_ID and
mbedtls_test_psa_purge_key_storage from
test_suite_psa_crypto_slot_management.function and
test_suite_psa_crypto_se_driver_hal.function into a single copy in
common test code so that it can be used in all test suites.
No semantic change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Persistent storage common code from
test_suite_psa_crypto_slot_management.function had been duplicated in
test_suite_psa_crypto_se_driver_hal.function and the copy had slightly
diverged. Re-align the copy in preparation from moving the code to a
common module and using that sole copy in both test suites.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move mbedtls_test_psa_exercise_key() (formerly exercise_key()) and
related functions to its own module. Export the few auxiliary
functions that are also called directly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
exercise_export_key() exports the key and does sanity checks on the
result. Here we've already just exported the key, so just run the
sanity checks.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename functions to mbedtls_test_psa_xxx if they're going to be
exported. Declare functions as static if they're aren't meant to be
called directly from test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests validate that an entropy object can be reused and that
calling mbedtls_entropy_free() twice is ok.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests are trivial except when compiling with MBEDTLS_THREADING_C
and a mutex implementation that are picky about matching each
mbedtls_mutex_init() with exactly one mbedtls_mutex_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If the mutex usage verification framework is enabled and it detects a
mutex usage error, report this error and mark the test as failed.
This detects most usage errors, but not all cases of using
uninitialized memory (which is impossible in full generality) and not
leaks due to missing free (which will be handled in a subsequent commit).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using pthread mutexes (MBEDTLS_THREADING_C and
MBEDTLS_THREADING_PTHREAD enabled), and when test hooks are
enabled (MBEDTLS_TEST_HOOKS), set up wrappers around the
mbedtls_mutex_xxx abstraction. In this commit, the wrapper functions
don't do anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some functions were not deinitializing the PSA subsystem. This could
lead to resource leaks at the level of individual test cases, and
possibly at the level of the whole test suite depending on the order
and selection of test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make USE_PSA_INIT() and USE_PSA_DONE() available in all test suites in
all cases, doing nothing if MBEDTLS_USE_PSA_CRYPTO is disabled. Use
those in preference to having explicit
defined(MBEDTLS_USE_PSA_CRYPTO) checks (but there may still be places
left where using the new macros would be better).
Also provide PSA_INIT() by symmetry with PSA_DONE(), functional
whenver MBEDTLS_PSA_CRYPTO_C is enabled, but currently unused.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In test_suite_psa_crypto_driver_wrappers test suite, the
sign/verify tests with software fallback tests should be run
only if the software fallback is available.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
A temporary hack: at the time of writing, not all dependency symbols
are implemented yet. Skip test cases for which the dependency symbols are
not available. Once all dependency symbols are available, this comit
should be reverted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_TYPE_RAW_DATA and PSA_KEY_TYPE_DERIVE are always supported.
Make this explicit by declaring PSA_WANT_KEY_TYPE_RAW_DATA and
PSA_WANT_KEY_TYPE_DERIVE unconditionally. This makes it easier to
infer dependencies in a systematic way.
Don't generate not-supported test cases for those key types. They
would always be skipped, which is noise and would make it impossible
to eventually validate that all test cases pass in at least one
configuration over the whole CI.
Don't remove the exception in set_psa_test_dependencies.py for now, to
get less noise in dependencies. This may be revised later if it is
deemed more important to be systematic.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ECC curve dependency symbols include the key size in addition to the
curve family. Tweak the dependencies once the key size is known.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test data file is automatically generated. We could do that as
part of the build, since the only requirement is Python and we have a
requirement on Python to build tests anyway (to generate the .c file
from the .function file). However, committing the generating file into
the repository has less impact on build scripts, and will be necessary
for some of the files generated by generate_psa_tests.py (at least the
storage format stability tests, for which stability is guaranteed by
the fact that the generated file doesn't change). To keep things
simple, for now, let's commit all the files generated by
generate_psa_tests.py into the repository.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To start with, test that key creation fails as intended when the key
type is not supported. This commit only covers psa_import_key and
psa_generate_key. A follow-up will cover psa_key_derivation_output_key.
My primary intent in creating this new test suite is to automatically
generate test cases by enumerating the key types and algorithms that
the library supports. But this commit only adds a few manually written
test cases, to get the ball rolling.
Move the relevant test cases of test_suite_psa_crypto.data that only
depend on generic knowledge about the API. Keep test cases that depend
more closely on the implementation, such as tests of non-supported key
sizes, in test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that the support for key generation in the transparent
test driver is at the same level as the support in the
Mbed TLS library, remove the restriction on the generate
key test case that was introduced by the work on key
import and export through the PSA driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a test in test_suite_psa_crypto_driver_wrappers that
when accelerators do not support the generation of a key
and there is no software fallback, the key generation
fails with the PSA_ERROR_NOT_SUPPORTED error code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Add macros to skip a test case when hitting a
common alternative implementation limitation.
Add a macro for AES-192 and GCM with a nonce
length different from 12 bytes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Make sure MBEDTLS_PSA_CRYPTO_CLIENT is defined
when MBEDTLS_PSA_CRYPTO_C is defined and guard
PSA client code only with MBEDTLS_PSA_CRYPTO_CLIENT.
The definition of MBEDTLS_PSA_CRYPTO_CLIENT is done
in crypto_types.h before the definition of
psa_key_attributes_t. That way as PSA crypto client
code is related to key attributes we can be quite
confident that MBEDTLS_PSA_CRYPTO_CLIENT will be
defined when needed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move test macros previously located in `suites/helpers.function` to
`include/test/macros.h`. This makes these test infrastructure macros
available for use in other parts of the test infrastructure at compile
time as opposed to run time.
This commit is a simple cut and paste from one file to the other.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the source address and the frame counter have the expected
length. Otherwise, if the test data was invalid, the test code could
build nonsensical inputs, potentially overflowing the iv buffer.
The primary benefit of this change is that it also silences a warning
from compiling with `gcc-10 -O3` (observed with GCC 10.2.0 on
Linux/amd64). GCC unrolled the loops and complained about a buffer
overflow with warnings like:
```
suites/test_suite_ccm.function: In function 'test_mbedtls_ccm_star_auth_decrypt':
suites/test_suite_ccm.function:271:15: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
271 | iv[i] = source_address->x[i];
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~
suites/test_suite_ccm.function:254:19: note: at offset [13, 14] to object 'iv' with size 13 declared here
254 | unsigned char iv[13];
```
Just using memcpy instead of loops bypasses this warnings. The added
checks are a bonus.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function generate_random allocated a few extra bytes after
the expected output and checked that these extra bytes were not
overwritten. Memory sanity checks such as AddressSanitizer and
Valgrind already detect this kind of buffer overflow, so having this
test in our code was actually redundant. Remove it.
This has the benefit of not triggering a build error with GCC
(observed with 7.5.0 and 9.3.0) when ASan+UBSan is enabled: with the
previous code using trail, GCC complained about an excessively large
value passed to calloc(), which was (size_t)(-sizeof(trail)).
Thus this commit fixes#4122.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test random generation as a whole. This is different from
test_suite_*_drbg and test_suite_entropy, which respectively test PRNG
modules and entropy collection.
Start with basic tests: good-case tests, and do it twice and compare
the results to validate that entropy collection doesn't repeat itself.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Both tests do not require a lot of RAM, even though it may seem
like it at first sight. The derivation output is generated blockwise
from the KDF function, which only keeps state amounting to a couple
of blocks of the underlying hash primitive at a time.
There is never an allocation to keep the full derivation capacity in
memory...
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add doxygen style documentation to `mbedtls_test_fail`, `mbedtls_test_skip`,
`mbedtls_test_set_step` and `mbedtls_test_info_reset`. This should make it
easier to understand how the test infrastructure is used.
Also make some minor style changes to meet the coding standards and make it
more obvious that `mbedtls_test_info.step` was being incremented.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a new function `mbedtls_test_info_reset()` to remove direct writes to
`mbedtls_test_info`. This change still allows values to be read directly
however all writes are now done inside of `helpers.c`.
Also slightly reordered code to make it easier to read.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix some export related tests that were
relying on the fact that the size of the
output buffer was checked after other
parameters.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The compilation guards in key_management.c are now
accelerator compilation guards (MBEDTLS_PSA_ACCEL_KEY_TYPE_xyz).
As a consequence when running the PSA driver wrapper
tests as part of test_psa_crypto_config_basic
and test_psa_crypto_drivers all.sh components all
key management cryptographic operations were handled by
the software builtin fallback, and not by the test driver
as intended in the first place.
This commits fixes this issue by:
. declaring an accelerator for ECC key pairs in
test_psa_crypto_config_basic.
. declaring an accelerator for both ECC and RSA
key pairs in test_psa_crypto_drivers.
It is possible to declare an accelerator for both
ECC and RSA key pairs in test_psa_crypto_drivers
and not in test_psa_crypto_config_basic because
in the case of test_psa_crypto_drivers the new
PSA configuration is not activated. That way,
the builtin fallback software implementation
is present to supply the transparent test driver
when some support is missing in it (mainly
RSA key generation).
Note that the declaration of accelerators does
much more than just "fixing" the execution flow of
driver wrapper tests, it makes all import and public
key export cryptographic operations in all unit
tests being handled by the transparent test driver
(provided that it supports the key type).
One test case related to key generation is
partially disabled. This will be fixed with the
rework of psa_generate_key along the lines
described in psa-crypto-implementation-structure.md.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test_suite_psa_crypto_driver_wrappers test suite, the
generate key with software fallback test should be run
only if the software fallback is available.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add test cases for mbedtls_mpi_sub_abs() where the second operand has
more limbs than the first operand (which, if the extra limbs are not
all zero, implies that the function returns
MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
This exposes a buffer overflow (reported in #4042).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Storage format tests that only look at how the file is structured and
don't care about the format of the key material don't depend on any
cryptographic mechanisms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The negative test cases for psa_copy_key() don't actually care whether
the target policy is supported. This is similar to _key_policy tests.
Add a similar rule.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function asymmetric_signature_key_policy combines positive
and negative tests inside the code, so it doesn't take a status as its
last argument.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Switch dependencies on MBEDTLS_xxx to PSA_WANT_xxx for hash
algorithms.
Add a missing dependency in bad_order functions (it was previously
expressed in the .data file, but this is no longer the case when
dependencies in the .data file are determined automatically).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace manually written dependencies on MBEDTLS_xxx with
PSA_WANT_xxx dependencies that are determined automatically from the
test data.
Run tests/scripts/set_psa_test_dependencies.py on
tests/suites/test_suite_psa_crypto*.data,
except for the dynamic secure element tests in
tests/suites/test_suite_psa_crypto_se_driver_hal*.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using the test function persistent_key_load_key_from_storage with
DERIVE_KEY, there's a dependency on HKDF-SHA-256. Since this
dependency is in the code, declare it there rather than with the data.
If the depenency is not met, mark the test as skipped since it can't
create the key to be tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move PSA key attributes tests to their own
test suite to be able to run them when
MBEDTLS_PSA_CRYPTO_CLIENT is enabled but
not MBEDTLS_PSA_CRYPTO_C.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Adds the `mbedtls_` prefix to `test_result_t` and `test_info` and updates
any references to them. This is to follow the naming convention as these are
now declared in a public namespace.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Moves the functions `test_fail`, `test_set_step`, `test_skip` and the struct
`test_info` from `tests/suites/helpers.function` to `tests/src/helpers.*`.
This is done to open these functions up to the API where they can be used by
other functions in the 'src' test infrastructure module.
As the functions are now contained within the src folder of the testing
infrastructure, the `mbedtls_` prefix has been added to the functions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`test_fail` automatically sets `test_info.result`. This commit removes a case
where `test_info.result` was being manually set after `test_fail` was called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
- following the removal of the RSA_VALIDATE_RET() to check
the salt length, this test is not necessary/required anymore
- negative salt length are caught later in the function
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- removed the check on saltlen > 0 and added tests
positive test cases for this.
- added negative test cases when even saltlen == 0
is not enough. This allowed to uncover an underflow bu
in the slen check (when olen-slen-2 is negative)
- fixed the saltlen check to avoid underflow
- added more test cases where saltlen is the maximum
possible value and one above the maximum possible value
(different hash, different key size)
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
TEST_ASSERT jumps to the exit label, so it must not be called from
cleanup code executed after the exit label. It's legitimate (and
indeed very common) to call PSA_DONE in cleanup code, so PSA_DONE must
not jump to exit.
Define an auxiliary function test_fail_if_psa_leaking() that calls
test_fail() with the error message provided by
mbedtls_test_helper_is_psa_leaking(). This function currently needs to
be in helpers.function rather than in a PSA-specific helper file
because it calls test_fail which is defined in helpers.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't microoptimize memory usage in tests: use separate buffers for
the input and the output. Allocate the input buffer dynamically
because the size is a parameter of the test case. Allocate the output
buffer dynamically because it's generally good practice in tests so
that a memory sanitizer can detect a buffer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When verifying the impact of a forced RNG failure, depend on the built-in
implementation of the algorithm that uses randomization, whether it's
because the algorithm is randomized or because our implementation uses
randomization for (e.g.) blinding. An external implementation could use
its own randomness source which is not affected by the forced failure of
the RNG driver.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Under MBEDTLS_ERR_RSA_RNG_FAILED, add tests where the random generator
failed. This commit tests the following operations:
* psa_generate_random()
* psa_generate_key() for a symmetric key
* Deterministic signatures that use blinding (RSA PKCS#1v1.5,
deterministic ECDSA).
* Randomized signatures (RSA PSS, randomized ECDSA).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To reduce the risk of people accidentally using the test
implementation of mbedtls_psa_external_get_random(), which is
insecure, require the user to explicitly call
mbedtls_test_enable_insecure_external_rng() first.
Disabling the test implementation of mbedtls_psa_external_get_random()
will also allow negative testing for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG,
which will be added in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Include psa_crypto_helpers.h automatically if MBEDTLS_PSA_CRYPTO_C is
enabled, like helpers.h is included automatically.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_crypto_helpers.h no longer defines static functions, so it can be
included anywhere without worrying about unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test suite assumed that if SHA512 was enabled, then
SHA384 was also available. This is not true. There is
config MBEDTLS_SHA512_NO_SHA384 which allows precisely
to add SHA512 and not SHA384.
This commits adds the necessary `depends_on` clause,
to avoid running the SHA384 tests when config
MBEDTLS_SHA512_NO_SHA384 is set.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- all positibe test cases were sampled from the CAVP test suite
(SigGenPSS_186-2.txt, SigGenPSS_186-3.txt)
Only kept one representative for each triple (modlen, sha, saltlen)
- two extra test cases were added to cover the maximum salt length
(slen=olen-slen-2 and slen=(olen-slen-2)-1)
- in rsa.c, the salt intermediate buffer was too small to cover cases
where slen > hlen. So reworked the code to generate the salt in the
encoded message directly. This has the advantage to remove a memcpy
and a memset.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
Make it clear that this is an abstraction of the random generator
abstraction, and not an abstraction of the PSA random generator.
mbedtls_psa_get_random and MBEDTLS_PSA_RANDOM_STATE are public-facing
definitions and will be moved in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executed ./scripts/bump_version.sh --version 2.25.0 --so-crypto 6
Increasing the SO version of the crypto library, because the openless
API improvement came with API/ABI incompatibilities. For example
- the size of psa_key_handle_t changed
- the type of a parameter in 18 public functions has changed from
psa_key_handle_t to mbedtls_svc_key_id_t
Signed-off-by: Janos Follath <janos.follath@arm.com>
In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make sure that if a buffer is allowed to be empty, a null pointer is
accepted if the buffer length is 0. This was already the case for most
but not all arguments to mbedtls_cipher_auth_{en,de}crypt{,_ext}.
Make sure to pass NULL for an empty buffer in the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We want to test both sets of functions (ext and non-ext) in turn, so goto exit
is not really and option.
Also, separate setting up the context (which is going to be the same for both
ext and non-ext functions) from setting up the buffers (which will vary).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement support for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
For test purposes, write an implementation that uses libc rand().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
After a call to psa_get_key_attributes() to retrieve
the attributes of a key into a psa_key_attributes_t
structure, a call to psa_reset_key_attributes() is
mandated to free the resources that may be
referenced by the psa_key_attributes_t structure.
Not calling psa_reset_key_attributes() may result in
a memory leak.
When a test function calls psa_get_key_parameters()
the associated key attributes are systematically
reset in the clean-up part of the function with a
comment to emphasize the need for the reset and make
it more visible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When key identifiers encode key owner, add tests
checking that:
. the key owner of an imported volatile key is
the one specified.
. a key identifier of a volatile key with a valid
PSA key identifier but the wrong owner is
rejected.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
