mirror of
https://github.com/yuzu-emu/mbedtls.git
synced 2024-11-27 11:34:20 +01:00
97 lines
4.3 KiB
Markdown
97 lines
4.3 KiB
Markdown
# mbed TLS benchmark
|
|
|
|
This application benchmarks the various cryptographic primitives offered by mbed TLS.
|
|
|
|
## Pre-requisites
|
|
|
|
To build and run this example the requirements below are necessary:
|
|
|
|
* A computer with the following software installed:
|
|
* [CMake](http://www.cmake.org/download/).
|
|
* [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows).
|
|
* [Python](https://www.python.org/downloads/).
|
|
* [ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded).
|
|
* A serial terminal emulator (e.g. screen, pySerial, cu).
|
|
* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in that case you'll have to substitute frdm-k64f-gcc with the appropriate target below).
|
|
* A micro-USB cable.
|
|
* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration).
|
|
|
|
## Getting started
|
|
|
|
1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the micro-usb port labeled "OpenSDA".
|
|
|
|
2. Navigate to the mbedtls directory supplied with your release and open a terminal.
|
|
|
|
3. Set the yotta target:
|
|
|
|
```
|
|
yotta target frdm-k64f-gcc
|
|
```
|
|
|
|
4. Check that there are no missing dependencies:
|
|
|
|
```
|
|
$ yt ls
|
|
```
|
|
|
|
If there are, yotta will list them in the terminal. Please install them before proceeding.
|
|
|
|
5. Build mbedtls and the examples. This will take a long time if it is the first time:
|
|
|
|
```
|
|
$ yt build
|
|
```
|
|
|
|
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-benchmark.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
|
|
|
|
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
|
|
|
|
8. Press the reset button on the board.
|
|
|
|
9. The output in the terminal window should look like:
|
|
|
|
```
|
|
{{timeout;150}}
|
|
{{host_test_name;default}}
|
|
{{description;mbed TLS benchmark program}}
|
|
{{test_id;MBEDTLS_BENCHMARK}}
|
|
{{start}}
|
|
|
|
|
|
SHA-1 : 3644 Kb/s, 32 cycles/byte
|
|
SHA-256 : 1957 Kb/s, 59 cycles/byte
|
|
SHA-512 : 587 Kb/s, 200 cycles/byte
|
|
AES-CBC-128 : 1359 Kb/s, 86 cycles/byte
|
|
AES-CBC-192 : 1183 Kb/s, 99 cycles/byte
|
|
AES-CBC-256 : 1048 Kb/s, 111 cycles/byte
|
|
AES-GCM-128 : 421 Kb/s, 279 cycles/byte
|
|
AES-GCM-192 : 403 Kb/s, 292 cycles/byte
|
|
AES-GCM-256 : 385 Kb/s, 305 cycles/byte
|
|
AES-CCM-128 : 542 Kb/s, 216 cycles/byte
|
|
AES-CCM-192 : 484 Kb/s, 242 cycles/byte
|
|
AES-CCM-256 : 437 Kb/s, 268 cycles/byte
|
|
CTR_DRBG (NOPR) : 1002 Kb/s, 117 cycles/byte
|
|
CTR_DRBG (PR) : 705 Kb/s, 166 cycles/byte
|
|
HMAC_DRBG SHA-1 (NOPR) : 228 Kb/s, 517 cycles/byte
|
|
HMAC_DRBG SHA-1 (PR) : 210 Kb/s, 561 cycles/byte
|
|
HMAC_DRBG SHA-256 (NOPR) : 212 Kb/s, 557 cycles/byte
|
|
HMAC_DRBG SHA-256 (PR) : 185 Kb/s, 637 cycles/byte
|
|
RSA-2048 : 41 ms/ public
|
|
RSA-2048 : 1349 ms/private
|
|
RSA-4096 : 134 ms/ public
|
|
RSA-4096 : 7149 ms/private
|
|
ECDSA-secp384r1 : 640 ms/sign
|
|
ECDSA-secp256r1 : 387 ms/sign
|
|
ECDSA-secp384r1 : 1233 ms/verify
|
|
ECDSA-secp256r1 : 751 ms/verify
|
|
ECDHE-secp384r1 : 1191 ms/handshake
|
|
ECDHE-secp256r1 : 730 ms/handshake
|
|
ECDHE-Curve25519 : 611 ms/handshake
|
|
ECDH-secp384r1 : 584 ms/handshake
|
|
ECDH-secp256r1 : 365 ms/handshake
|
|
ECDH-Curve25519 : 303 ms/handshake
|
|
|
|
{{success}}
|
|
{{end}}
|
|
```
|