Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Backports commit 5b146dc716cfd247f99556c04e6e46fbd67565a0 from qemu
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Backports commit 677c4d69ac21961e76a386f9bfc892a44923acc0 from qemu
Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu. The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Backports commit 3109cd98a6c0c618189b38a83a8aa29cb20acbce from qemu
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Backports commit 29a0af618ddd21f55df5753c3e16b0625f534b3c from qemu
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Backports commit 74433bf083b0766aba81534f92de13194f23ff3e from qemu
According to the spec, "All bits besides SSIP, USIP, and UEIP in the sip
register are read-only." Further, if an interrupt is not delegated to mode x,
then "the corresponding bits in xip [...] should appear to be hardwired to
zero. This patch implements both of those requirements.
Backports commit 087b051a51a0c2a5bc1e8d435a484a8896b4176b from qemu
C.ADDI16SP, C.LWSP, C.JR, C.ADDIW, C.LDSP all have reserved
operands that were not diagnosed.
Backports commit 4cc16b3b9282e04fab8e84d136540757e82af019 from qemu
At the same time deprecate the ISA string CPUs.
It is dobtful anyone specifies the CPUs, but we are keeping them for the
Spike machine (which is about to be depreated) so we may as well just
mark them as deprecated.
Backports commit 8903bf6e6d73d03b988b4a8197132de2ad681ff5 from qemu
The tcg_gen_fooi_tl functions have some immediate constant
folding built in, which match up with some of the riscv asm
builtin macros, like mv and not.
Backports commit 598aa1160c3d17ab9271daf1f69d093ebada3f25 from qemu
This eliminates all functions in insn_trans/trans_rvc.inc.c,
so the entire file can be removed.
Backports commit 0e68e240a9bd3b44a91cd6012f0e2bf2a43b9fe2 from qemu
This eliminates about half of the complicated decode
bits within insn_trans/trans_rvc.inc.c.
Backports commit c2cfb97c01a3636867c1a4a24f8a99fd8c6bed28 from qemu
Special handling for IMM==0 is the only difference between
RVC shifti and RVI shifti. This can be handled with !function.
Backports commit 6cafec92f1c862a9754ef6a28be68ba7178a284d from qemu
In some cases this allows us to directly use the insn32
translator function. In some cases we still need a shim.
Backports commit e1d455dd91c935c714412dafeb24db947429a929 from qemu
The generated functions are only used within translate.c
and do not need to be global, or declared.
Backports commit 81770255581bd210c57b86a6e808628ab8d0c543 from qemu
This patch introduces wrappers around the tcg_gen_exit_tb() and
tcg_gen_lookup_and_goto_ptr() functions that handle single stepping,
i.e. call gen_exception_debug() when single stepping is enabled.
Theses functions are then used instead of the originals, bringing single
stepping handling in places where it was previously ignored such as jalr
and system branch instructions (ecall, mret, sret, etc.).
Backports commit 6e2716d8ca4edf3597307accef7af36e8ad966eb from qemu
The 'sfence.vma' instruction is privileged, and should only ever be allowed
when executing in supervisor mode or higher.
Backports commit b86f4167630802128d94f3c89043d97d2f4c2546 from qemu
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Backports commit c319dc13579a92937bffe02ad2c9f1a550e73973 from qemu
Note that env->pc is removed from the qemu_log as that value is garbage.
The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from riscv_raise_exception.
Backports commit 8a4ca3c10a96be6ed7f023b685b688c4d409bbcb from qemu
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Backports commit a8b991b52dcde75ab5065046653626951aac666d from qemu
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Backports commit 8b86d6d25807e13a63ab6ea879f976b9f18cc45a from qemu
While running the GCC test suite against 4.0.0-rc0, Kito found a
regression introduced by the decodetree conversion that caused divuw and
remuw to sign-extend their inputs. The ISA manual says they are
supposed to be zero extended:
DIVW and DIVUW instructions are only valid for RV64, and divide the
lower 32 bits of rs1 by the lower 32 bits of rs2, treating them as
signed and unsigned integers respectively, placing the 32-bit
quotient in rd, sign-extended to 64 bits. REMW and REMUW
instructions are only valid for RV64, and provide the corresponding
signed and unsigned remainder operations respectively. Both REMW
and REMUW always sign-extend the 32-bit result to 64 bits, including
on a divide by zero.
Here's Kito's reduced test case from the GCC test suite
unsigned calc_mp(unsigned mod)
{
unsigned a,b,c;
c=-1;
a=c/mod;
b=0-a*mod;
if (b > mod) { a += 1; b-=mod; }
return b;
}
int main(int argc, char *argv[])
{
unsigned x = 1234;
unsigned y = calc_mp(x);
if ((sizeof (y) == 4 && y != 680)
|| (sizeof (y) == 2 && y != 134))
abort ();
exit (0);
}
I haven't done any other testing on this, but it does fix the test case.
Backports commit f17e02cd3731bdfe2942d1d0b2a92f26da02408c from qemu
If vectored interrupts are enabled (bits[1:0]
of mtvec/stvec == 1) then use the following
logic for trap entry address calculation:
pc = mtvec + cause * 4
In addition to adding support for vectored interrupts
this patch simplifies the interrupt delivery logic
by making sync/async cause decoding and encoding
steps distinct.
The cause code and the sign bit indicating sync/async
is split at the beginning of the function and fixed
cause is renamed to cause. The MSB setting for async
traps is delayed until setting mcause/scause to allow
redundant variables to be eliminated. Some variables
are renamed for conciseness and moved so that decls
are at the start of the block.
Backports commit acbbb94e5730c9808830938e869d243014e2923a from qemu
This effectively changes riscv_cpu_update_mip
from edge to level. i.e. cpu_interrupt or
cpu_reset_interrupt are called regardless of
the current interrupt level.
Fixes WFI doesn't return when a IPI is issued:
- https://github.com/riscv/riscv-qemu/issues/132
To test:
1) Apply RISC-V Linux CPU hotplug patch:
- http://lists.infradead.org/pipermail/linux-riscv/2018-May/000603.html
2) Enable CONFIG_CPU_HOTPLUG in linux .config
3) Try to offline and online cpus:
echo 1 > /sys/devices/system/cpu/cpu2/online
echo 0 > /sys/devices/system/cpu/cpu2/online
echo 1 > /sys/devices/system/cpu/cpu2/online
Backports commit d26f5a423438e579d3ff0ca35e44edb966a36233 from qemu
This change checks elf_flags for EF_RISCV_RVE and if
present uses the RVE linux syscall ABI which uses t0
for the syscall number instead of a7.
Warn and exit if a non-RVE ABI binary is run on a
cpu with the RVE extension as it is incompatible.
Backports relevant parts of 5836c3eccedb6dfab16b8f606f2de24b8938b69c
from qemu
We can't allow the supervisor to control SEIP as this would allow the
supervisor to clear a pending external interrupt which will result in
lost a interrupt in the case a PLIC is attached. The SEIP bit must be
hardware controlled when a PLIC is attached.
This logic was previously hard-coded so SEIP was always masked even
if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts
so that the PLIC can register control of SEIP. In the case of models
without a PLIC (spike), the SEIP bit remains software controlled.
This interface allows for hardware control of supervisor timer and
software interrupts by other interrupt controller models.
Backports commit e3e7039cc24ecf47d81c091e8bb04552d6564ad8 from qemu
Add a debugger field to CPURISCVState. Add riscv_csrrw_debug function
to set it. Disable mode checks when debugger field true.
Backports commit 753e3fe207db08ce0ef0405e8452c3397c9b9308 from qemu
This adds some missing CSR_* register macros, and documents some as being
priv v1.9.1 specific.
Backports commit 8e73df6aa3f2f0e5c26c03a94a88406616291815 from qemu
during the refactor to decodetree we removed the manual decoding that is
necessary for c.jal/c.addiw and removed the translation of c.flw/c.ld
and c.fsw/c.sd. This reintroduces the manual parsing and the
omited implementation.
Backports commit f330433b3633647b047cfa418c2ca4d18fda69c7 from qemu
with all 16 bit insns moved to decodetree no path is falling back to
gen_system(), so we can remove it.
Backports commit 8f7bc273868939f0821e07fb23792db63d45bffb from qemu
